HPE 851928-B21 Getting Started Guide

QuickSpecs

HPE Apollo Ethernet 10GbE PassThru Module

Overview

Page 1

HPE Apollo Ethernet 10GbE PassThru Module

The HPE

blocking,
one
ports

The HPE
server tray

HPE Apollo Ethernet 10GbE Pass Thru Module

1.

Ethernet port link status LEDs

2.

Reset pin-hole button

3.

UID LED

4.

Health LED

5.

QSFP+ (6x10Gb) Ports

Apollo Ethernet 10GbE PassThru Module is designed for HPE Apollo k6000 Gen10 customers requiring a non-

-to-one connection between each server and networking switches. The pass-thru module provides 6 QSFP+ (6x10Gb) uplink
.

Apollo Ethernet 10GbE PassThru Module supports up to 24 10Gb connections one for each HPE ProLiant XL230k

. Optical as well as Direct Attach Copper (DAC) cables are also supported.

QuickSpecs

HPE Apollo Ethernet 10GbE PassThru Module

Platform Information

Page 2

Model

HPE Apollo Ethernet 10Gb Pass Thru Module

851928-B21

What's New

At A Glance

Performance:

• Support for HPE Apollo k6000 Gen10 System

• 24 direct server to network connections

• 10Gb connection to each server

• Supports standard Ethernet

QuickSpecs

HPE Apollo Ethernet 10GbE PassThru Module

Standard Features

Page 3

Compatibility

HPE ProLiant Servers

• HPE ProLiant XL230k Gen10 Server

HPE Apollo k6000

• HPE Apollo k6000 Chassis

Management

• Module monitored by the HPE Chassis Controller or HPE Apollo Platform Manager (if installed)

Warranty and support

• This product is covered by a global limited warranty and supported by Hewlett Packard

Channel Partners (may vary by region). Hardware diagnostic support and repair is available for

Chassis

Enterprise Services and a worldwide network of Hewlett Packard Enterprise Authorized

three years from date of purchase. Support for software and initial setup is available for 90
days from date of purchase. Enhancements to warranty services are available through HPE
Pointnext operational services or customized service agreements. Hard drives have either a
one year or three year warranty

NOTE: Server Warranty includes 3 year Parts, 3 year Labor, 3-year on-site support with next
business day response. Warranty repairs may be accomplished through the use of Customer Self
Repair (CSR) parts. These parts fall into two categories: 1) Mandatory CSR parts are designed for
easy replacement. A travel and labor charge will result when customers decline to replace a
Mandatory CSR part; 2) Optional CSR parts are also designed for easy replacement but may involve
added complexity. Customers may choose to have Hewlett Packard Enterprise replace Optional CSR
parts at no charge. Additional information regarding worldwide limited warranty and technical
support is available at:

http://h18004.www1.hpe.com/products/servers/platforms/warranty/index.html