HP UNIX AA-XXXXX-TF User Manual

SysMan on iPAQ
Accessing SysMan Menu from an iPAQ Pocket PC
Part Number: AA-xxxxx-TF
November 2002 Operating System and Version: Tru64 UNIX, Version 5.1 and higher
This document describes the installation procedure and the instructions for accessing the SysMan Menu from a HP iPAQ Pocket PC.
© 2002 Hewlett-Packard Company COMPAQ,the Compaq logo, Tru64, and TruCluster are trademarks of Compaq Information Technologies
Group, L.P. in the U.S. and/or other countries. Microsoft, Windows, Windows 200, Windows NT, Windows XP, Windows CE, Pocket PC Software 2002, and
ActiveSync are trademarks of Microsoft Corporation in the U.S. and/or other countries. UNIX and The Open Group are trademarks of the Open Group in the U.S. and/or other countries. All other product names mentioned herein may be trademarks of their respective companies.
Confidential computer software. Valid license from Compaq Computer Corporation, a wholly owned subsidiary of Hewlett-Packard Company, required for possession, use, or copying. Consistent with FAR
12.211 and 12.212, Commercial Computer Software, Computer Software Documentation, and Technical Data for Commercial Items are licensed to the U.S. Government under vendor’s standard commercial license.
None of Compaq, HP, or any of their subsidiaries shall be liable for technical or editorial errors or omissions contained herein. The information is provided “as is” without warranty of any kind and is subject to change without notice. The warranties for HP or Compaq products are set forth in the express limited warranty statements accompanying such products. Nothing herein should be construed as constituting an additional warranty.
1 Installing the Software
1.1
1.1.1
1.1.2
1.1.3
1.2
1.2.1
1.2.2
1.3
1.4
1.4.1
1.4.2
Minimal Requirements ..............................................
Tru64 UNIX Minimum Requirements ........................ 1–1
Personal Computer Minimum Requirements ................ 1–2
iPAQ Pocket PC Minimum Requirements .................... 1–2
TransferringSysMan iPAQ software .............................. 1–3
Downloading by way of the Tru64 UNIX System ........... 1–4
Downloading by way of the PC .................................
Installing the
Upgrading the Authentication Server ............................. 1–5
Upgrade Determination .........................................
Upgrade Procedure ..............................................
sysmanipaq.cab File .............................. 1–5
2 Accessing the SysMan Menu
2.1
2.1.1
2.1.2
2.1.3
2.1.4
2.2
2.3
Host List ...............................................................
Connecting to the Remote Host ................................
Adding Hosts ......................................................
Modifying Hosts ..................................................
Deleting Hosts ....................................................
Invoking SysMan Menu Applications .............................. 2–2
Exiting the SysMan Menu ........................................... 2–2
Contents
1–1
1–5
1–6 1–6
2–1 2–1 2–1 2–2 2–2
Contents iii
You can perform system administration tasks remotely on a system running Tru64 UNIX by using your iPAQ Pocket PC hand-held computer, after you download and install the SysMan iPAQ software.
1.1 Minimal Requirements
The following section states the minimal requirements for both the installation and use of the software to access the SysMan Menu from the iPAQ Pocket PC hand-held computer. These requirements are divided into these categories:
Tru64 UNIX requirements
Personal computer requirements
iPAQ Pocket PC requirements
The majority of these requirements are easily fulfilled.
1
Installing the Software
1.1.1 Tru64 UNIX Minimum Requirements
Tru64 UNIX Version 5.1 or higher For TruCluster systems, all cluster nodes must be running the same
version of the operating system, Version 5.1 or higher. To verify the version of the Tru64 UNIX operating system on a single
system, enter the following command:
# /usr/sbin/sizer -v HP Tru64 UNIX V5.1A (Rev. 1885)
To verify the version of the Tru64 UNIX operating system on each node of a TruCluster system, enter the following command:
# clu_get_info -full | grep "Member cluster version"
The following is output for each node of the TruCluster system:
Member cluster version = HP TruCluster server V5.1A (Rev. 1312)
Wireless Network support
Installing the Software 1–1
Loading...
+ 10 hidden pages