HP Stream Notebook - 11-d010nr, Stream Notebook - 11-d010wm, Stream Notebook - 11-d011wm, Stream Notebook - 11-d077nr User Manual

User Guide

Bluetooth is a trademark owned by its proprietor and used by Hewlett-Packard Company under license. Intel is a trademark of Intel Corporation in the U.S. and other countries. Microsoft and Windows are U.S. registered trademarks of the Microsoft group of companies.

The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.

First Edition: October 2014

Document Part Number: 787340–001

Product notice

This guide describes features that are common to most models. Some features may not be available on your computer.

Not all features are available in all editions of Windows. This computer may require upgraded and/or separately purchased hardware, drivers and/or software to take full advantage of Windows functionality. Go to

http://www.microsoft.com for details.

To access the latest user guide, go to

http://www.hp.com/support, and select your

country. Select Drivers & Downloads, and then follow the on-screen instructions.

Software terms

By installing, copying, downloading, or otherwise using any software product preinstalled on this computer, you agree to be bound by the terms of the HP End User License Agreement (EULA). If you do not accept these license terms, your sole remedy is to return the entire unused product (hardware and software) within 14 days for a full refund subject to the refund policy of your seller.

For any further information or to request a full refund of the price of the computer, please contact your seller.

Safety warning notice

WARNING! To reduce the possibility of heat-related injuries or of overheating the computer, do not

place the computer directly on your lap or obstruct the computer air vents. Use the computer only on a hard, flat surface. Do not allow another hard surface, such as an adjoining optional printer, or a soft surface, such as pillows or rugs or clothing, to block airflow. Also, do not allow the AC adapter to come into contact with the skin or a soft surface, such as pillows or rugs or clothing, during operation. The computer and the AC adapter comply with the user-accessible surface temperature limits defined by the International Standard for Safety of Information Technology Equipment (IEC 60950).

iii

iv Safety warning notice

Processor configuration setting (select models only)

IMPORTANT: Select computer models are configured with an Intel® Pentium® N35xx series or a

Celeron® N28xx/N29xx series processor and a Windows® operating system. Do not change the processor configuration setting in msconfig.exe from 4 or 2 processors to 1 processor. If you do so, your computer will not restart. You will have to perform a factory reset to restore the original settings.

vi Processor configuration setting (select models only)

Table of contents

1 Starting right ...................................................................................................................................................... 1

Visit the HP Apps Store ........................................................................................................................ 1

Best practices ....................................................................................................................................... 1

Fun things to do .................................................................................................................................... 1

More HP resources .............................................................................................................................. 3

2 Getting to know your computer ......................................................................................................................... 5

Finding your hardware and software information ................................................................................. 5

Locating hardware ............................................................................................................... 5

Locating software ................................................................................................................. 5

Right side ............................................................................................................................................. 6

Left side ................................................................................................................................................ 7

Display .................................................................................................................................................. 8

Top ....................................................................................................................................................... 9

Touchpad ............................................................................................................................. 9

Lights ................................................................................................................................. 10

Buttons ............................................................................................................................... 11

Keys ................................................................................................................................... 12

Bottom ................................................................................................................................................ 13

Labels ................................................................................................................................................. 14

3 Connecting to a network ................................................................................................................................. 16

Connecting to a wireless network ....................................................................................................... 16

Using the wireless controls ................................................................................................ 16

Using the wireless button .................................................................................. 16

Using operating system controls ....................................................................... 17

Sharing data and drives and accessing software .............................................................. 17

Using a WLAN ................................................................................................................... 17

Using an Internet service provider .................................................................... 18

Setting up a WLAN ............................................................................................ 18

Configuring a wireless router ............................................................................ 18

Protecting your WLAN ....................................................................................... 19

Connecting to a WLAN ...................................................................................... 19

Using HP Mobile Broadband (select models only) ............................................................ 20

Inserting and removing a SIM ........................................................................... 21

Using Bluetooth wireless devices (select models only) ..................................................... 22

vii

Connecting to a wired network (select models only) .......................................................................... 22

Connecting to a local area network (LAN) ......................................................................... 22

4 Enjoying entertainment features ..................................................................................................................... 23

Multimedia features ............................................................................................................................ 23

Using the webcam .............................................................................................................................. 25

Using audio ........................................................................................................................................ 25

Connecting headphones and microphones ....................................................................... 25

Testing your audio features ............................................................................................... 26

Using video ......................................................................................................................................... 26

Connecting video devices by using an HDMI cable ........................................................... 27

Setting up HDMI audio ...................................................................................... 28

Discovering and connecting to Miracast-compatible wireless displays (select models

only) ................................................................................................................................... 28

5 Navigating the screen ..................................................................................................................................... 29

Using the TouchPad and gestures ..................................................................................................... 29

Tapping .............................................................................................................................. 30

Scrolling ............................................................................................................................. 31

2-finger pinch zoom ........................................................................................................... 32

2-finger click ....................................................................................................................... 33

Rotating (select models only) ............................................................................................ 34

Edge swipes ...................................................................................................................... 35

Display and select a charm ............................................................................... 35

Display the Customize icon ............................................................................... 36

Switch between open apps ............................................................................... 37

Using the keyboard and mouse .......................................................................................................... 38

Using the keys ................................................................................................................... 38

Using the action keys ........................................................................................ 38

Using Windows shortcut keys ........................................................................... 39

Using the hot keys ............................................................................................. 39

6 Managing power ............................................................................................................................................. 40

Initiating Sleep and Hibernation ......................................................................................................... 40

Manually initiating and exiting Sleep .................................................................................. 41

Manually initiating and exiting Hibernation (select models only) ....................................... 41

Setting password protection on wakeup ............................................................................ 41

Using the power meter and power settings ........................................................................................ 42

Running on battery power .................................................................................................................. 42

Factory-sealed battery ....................................................................................................... 42

viii

Finding battery information ................................................................................................ 42

Conserving battery power .................................................................................................. 43

Identifying low battery levels .............................................................................................. 43

Resolving a low battery level ............................................................................................. 43

Resolving a low battery level when external power is available ........................ 43

Resolving a low battery level when no power source is available ..................... 43

Resolving a low battery level when the computer cannot exit Hibernation ....... 43

Running on external AC power .......................................................................................................... 44

Troubleshooting power problems ...................................................................................... 45

Shutting down (turning off) the computer ........................................................................................... 46

7 Maintaining your computer .............................................................................................................................. 47

Improving performance ...................................................................................................................... 47

Handling drives .................................................................................................................. 47

Using Disk Cleanup ........................................................................................................... 47

Updating programs and drivers .......................................................................................................... 48

Cleaning your computer ..................................................................................................................... 48

Cleaning procedures .......................................................................................................... 48

Cleaning the display (All-in-Ones or Notebooks) .............................................. 49

Cleaning the sides or cover ............................................................................... 49

Cleaning the TouchPad, keyboard, or mouse ................................................... 49

Traveling with or shipping your computer ........................................................................................... 50

8 Securing your computer and information ........................................................................................................ 51

Using passwords ................................................................................................................................ 51

Setting Windows passwords .............................................................................................. 52

Setting Setup Utility (BIOS) passwords ............................................................................. 52

Using Internet security software ......................................................................................................... 53

Using antivirus software ..................................................................................................... 53

Using firewall software ....................................................................................................... 53

Installing software updates ................................................................................................................. 53

Installing critical security updates ...................................................................................... 53

Installing HP and third-party software updates .................................................................. 54

Securing your wireless network .......................................................................................................... 54

Backing up your software applications and information ..................................................................... 54

Using an optional security cable lock ................................................................................................. 55

9 Using Setup Utility (BIOS) and HP PC Hardware Diagnostics (U

Starting Setup Utility (BIOS) ............................................................................................................... 56

Updating the BIOS ............................................................................................................................. 56

EFI) ............................................................ 56

Determining the BIOS version ........................................................................................... 56

Downloading a BIOS update ............................................................................................. 57

Using HP PC Hardware Diagnostics (UEFI) ...................................................................................... 58

Downloading HP PC Hardware Diagnostics (UEFI) to a USB device ............................... 58

10 Backing up, restoring, and recovering .......................................................................................................... 59

Creating recovery media and backups ............................................................................................... 59

Creating HP Recovery media ............................................................................................ 59

Restore and recovery ......................................................................................................................... 59

Recovering using HP Recovery Manager .......................................................................... 60

What you need to know ..................................................................................... 60

Using the HP Recovery partition (select models only) ...................................... 61

Using HP Recovery media to recover ............................................................... 61

Changing the computer boot order ................................................................... 61

11 Specifications ................................................................................................................................................ 62

Input power ......................................................................................................................................... 62

Operating environment ....................................................................................................................... 62

12 Electrostatic Discharge ................................................................................................................................. 63

Index ................................................................................................................................................................... 64

1 Starting right

This computer is a powerful tool designed to enhance your work and entertainment. Read this chapter to learn about best practices after you set up your computer, fun things to do with your computer, and where to find additional HP resources.

Visit the HP Apps Store

The HP Apps Store offers a wide choice of popular games, entertainment and music apps, productivity apps, and apps exclusive to HP that you can download to the Start screen. The selection is updated regularly and includes regional content and country-specific offers. Be sure to check the HP Apps Store frequently for new and updated features.

IMPORTANT: You must be connected to the Internet to access the HP Apps Store.

NOTE: HP picks is available in select countries only.

To view and download an app:

1. From the Start screen, select the Store app.

2. Select HP picks to view all the available apps.

3. Select the app you want to download, and then follow the on-screen instructions. When the

download is complete, the app appears on the All apps screen.

Best practices

After you set up and register the computer, we recommend the following steps to get the most out of your smart investment:

If you haven’t already done so, connect to a wired or wireless network. See details in

●

to a network on page 16.

Become familiar with the computer hardware and software. For more information, see

●

know your computer on page 5 and Enjoying entertainment features on page 23.

Update or purchase antivirus software. See

●

Back up your drive by creating recovery discs or a recovery flash drive. See

●

restoring, and recovering on page 59.

Fun things to do

You know that you can watch a YouTube video on the computer. But did you know that you can

●

also connect your computer to a TV or gaming console? For more information, see

video devices by using an HDMI cable on page 27.

You know that you can listen to music on the computer. But did you know that you can also

●

stream live radio to the computer and listen to music or talk radio from all over the world? See

Using audio on page 25.

Connecting

Getting to

Using antivirus software on page 53.

Backing up,

Connecting

Visit the HP Apps Store 1

You know that you can create a powerful presentation with Microsoft® applications. But did you

●

know you can also connect to a projector to share your ideas with a group? See

video devices by using an HDMI cable on page 27.

Use the TouchPad and the new Windows® touch gestures for smooth control of images and

●

pages of text. See

Using the TouchPad and gestures on page 29.

Connecting

2 Chapter 1 Starting right

More HP resources

You have already used

Setup Instructions

to turn on the computer and locate this guide. To locate

resources that provide product details, how-to information, and more, use this table.

Resource Contents

Setup Instructions

Help and Support

To access Help and Support, from the Start screen, type help, and then from the Search window, select Help and Support. For U.S. support, go to

http://www.hp.com/go/contactHP. For worldwide

support, go to

wwcontact_us.html.

Worldwide support

To get support in your language, go to

http://welcome.hp.com/country/us/en/ wwcontact_us.html.

http://welcome.hp.com/country/us/en/

Safety & Comfort Guide

To access this document:

1. From the Start screen, type support, and then

select the HP Support Assistant app.

‒ or –

From the Windows desktop, click the question mark icon in the notification area, at the far right of the taskbar.

Overview of computer setup and features

●

A broad range of how-to information and troubleshooting tips

●

Online chat with an HP technician

●

Support telephone numbers

●

HP service center locations

●

Proper workstation setup

●

Guidelines for posture and work habits that increase your

●

comfort and decrease your risk of injury

Electrical and mechanical safety information

●

2. Select My computer, and then select User

guides.

‒ or –

Go to

http://www.hp.com/ergo.

Regulatory, Safety and Environmental Notices

To access this document:

1. From the Start screen, type support, and then

select the HP Support Assistant app.

‒ or –

From the Windows desktop, click the question mark icon in the notification area, at the far right of the taskbar.

2. Select My Computer, and then select User

Guides.

Limited Warranty

To access this document:

1. From the Start screen, type support, and then

select the HP Support Assistant app.

‒ or –

Important regulatory notices, including proper battery disposal

●

information

Specific warranty information about this computer

●

More HP resources 3

Resource Contents

From the Windows desktop, click the question mark icon in the notification area, at the far right of the taskbar.

2. Select My computer, and then select Warranty

and services.

– or –

Go to

http://www.hp.com/go/orderdocuments.

*You can find the expressly provided HP Limited Warranty applicable to your product located with the user guides on your computer and/or on the CD/DVD provided in the box. In some countries/regions, HP may provide a printed HP Limited Warranty in the box. For countries/regions where the warranty is not provided in printed format, you may request a printed copy from

●

When you request a printed copy of your warranty, please include your product number, warranty period (found on your service label), name, and postal address.

http://www.hp.com/go/orderdocuments or write to:

North America: Hewlett-Packard, MS POD, 11311 Chinden Blvd., Boise, ID 83714, USA

Europe, Middle East, Africa: Hewlett-Packard, POD, Via G. Di Vittorio, 9, 20063, Cernusco s/Naviglio (MI), Italy

Asia Pacific: Hewlett-Packard, POD, P.O. Box 200, Alexandra Post Office, Singapore 911507

IMPORTANT: Do NOT return your HP product to the addresses above. For U.S. support, go to contactHP. For worldwide support, go to http://welcome.hp.com/country/us/en/wwcontact_us.html.

http://www.hp.com/go/

4 Chapter 1 Starting right

2 Getting to know your computer

Finding your hardware and software information

Locating hardware

To find out what hardware is installed on your computer:

1. From the Start screen, type control panel, and then select Control Panel.

2. Select System and Security, select System, and then click Device Manager in the left column.

A list displays all the devices installed on your computer.

To find out information about system hardware components and the system BIOS version number, press fn+esc.

Locating software

To find out what software is installed on your computer:

From the Start screen, click the down arrow in the lower-left corner of the screen.

▲

Finding your hardware and software information 5

Right side

Component Description

(1)

(2)

(3)

Power light

Audio-out (headphone)/Audio-in (microphone) jack

USB 2.0 port Connects an optional USB device, such as a keyboard,

On: The computer is on.

●

Blinking: The computer is in the Sleep state, a power-

●

saving state. The computer shuts off power to the display and other unneeded components.

Off: The computer is off or in Hibernation. Hibernation

●

is a power-saving state that uses the least amount of power.

Connects optional powered stereo speakers, headphones, earbuds, a headset, or a television audio cable. Also connects an optional headset microphone. This jack does not support optional microphone-only devices.

WARNING! To reduce the risk of personal injury, adjust

the volume before putting on headphones, earbuds, or a headset. For additional safety information, refer to the

Regulatory, Safety, and Environmental Notices

this guide, from the Start screen, type support, and then select the HP Support Assistant app.

NOTE: When a device is connected to the jack, the

computer speakers are disabled.

NOTE: Be sure that the device cable has a 4-conductor

connector that supports both audio-out (headphone) and audio-in (microphone).

mouse, external drive, printer, scanner or USB hub.

. To access

(4)

(5)

USB 3.0 port Connects an optional USB device, such as a keyboard,

HDMI port Connects an optional video or audio device, such as a high-

6 Chapter 2 Getting to know your computer

mouse, external drive, printer, scanner or USB hub.

definition television, any compatible digital or audio component, or a high-speed HDMI device.

Left side

Component Description

(1) Security cable slot Attaches an optional security cable to the computer.

(2) Power connector Connects an AC adapter.

NOTE: The security cable is designed to act as a

deterrent, but it may not prevent the computer from being mishandled or stolen.

(3) AC adapter light

(4)

(5)

SIM Card slot (select models only) A slot for a SIM card.

Memory card reader Reads optional memory cards that store, manage, share, or

White: The AC adapter is connected and the battery is

●

charged.

Amber: The AC adapter is connected and the battery

●

is charging.

Off: The computer is using battery power.

●

NOTE: This feature is available on select models only.

access information.

To insert a card:

Hold the card label-side up, with connectors facing the slot, insert the card into the slot, and then push in on the card until it is firmly seated.

To remove a card:

Press in on the card it until it pops out.

Left side 7

Display

Component Description

(1) WLAN antennas (2)* Send and receive wireless signals.

(2) WWAN antennas (2)* Send and receive wireless signals.

(3) Internal microphones Record sound.

(4) Webcam light On: The webcam is in use.

(5) Webcam Records video and captures photographs. Some models allow

(6) Internal display switch Turns off the display and initiates Sleep if the display is closed

*The antennas are not visible from the outside of the computer. For optimal transmission, keep the areas immediately around the antennas free from obstructions. For wireless regulatory notices, see the section of the

Environmental Notices

and then select the HP Support Assistant app.

that applies to your country or region. To access this guide, from the Start screen, type support,

you to video conference and chat online using streaming video.

To use the webcam, from the Start screen, type camera, and then select Camera from the list of applications.

while the power is on.

NOTE: The internal display switch is not visible from the

outside of the computer.

Regulatory, Safety, and

8 Chapter 2 Getting to know your computer

Top

Touchpad

Component Description

(1) TouchPad zone Reads your finger gestures to move the pointer or activate items

on the screen.

NOTE: The TouchPad also supports edge-swipe gestures. For

more information, see

(2) Left TouchPad button Functions like the left button on an external mouse.

(3) Right TouchPad button Functions like the right button on an external mouse.

Edge swipes on page 35.

Top 9

Lights

Component Description

(1)

(2) Caps lock light

(3)

Power light

Mute light

On: The computer is on.

●

Blinking: The computer is in the Sleep state, a power-

●

saving state. The computer shuts off power to the display and other unneeded components.

Off: The computer is off or in Hibernation. Hibernation

●

is a power-saving state that uses the least amount of power.

On: Caps lock is on, which switches the keys to all

●

capital letters.

Amber: Computer sound is off.

●

Off: Computer sound is on.

●

10 Chapter 2 Getting to know your computer

Buttons

Component Description

(1) Power button

When the computer is off, press the button to turn on the

●

computer.

When the computer is on, press the button briefly to initiate

●

Sleep.

When the computer is in Hibernation, press the button

●

briefly to exit Hibernation.

CAUTION: Pressing and holding down the power button will

result in the loss of unsaved information.

If the computer has stopped responding and Windows shutdown procedures are ineffective, press and hold the power button down for at least 5 seconds to turn off the computer. To learn more about your power settings, see your power options.

From the Start screen, type power, select Power and

▲

sleep settings, and then select Power and sleep from the list of applications.

- or -

From the Windows desktop, right-click the Start button, and then select Power Options.

Top 11

Keys

Component Description

(1) esc key Displays system information when pressed in combination

with the fn key.

(2) fn key Executes frequently used system functions when pressed

in combination with the esc key, or on select models, the

spacebar.

(3)

(4) Action keys Execute frequently used system functions.

Windows key Returns you to the Start screen from an open app or the

Windows desktop.

NOTE: Pressing the Windows key again will return you to

the previous screen.

NOTE: On select models, the f5 action key turns the

radiance backlight keyboard feature off or on.

12 Chapter 2 Getting to know your computer

Bottom

Component Description

(1) Speakers (2) Produce sound.

Bottom 13

Labels

The labels affixed to the computer provide information you may need when you troubleshoot system problems or travel internationally with the computer.

IMPORTANT: All labels described in this section will be affixed to the bottom of the computer.

Service label—Provides important information to identify your computer. When contacting

●

support, you will probably be asked for the serial number, and possibly for the product number or the model number. Locate these numbers before you contact support.

Your service label may look slightly different from the illustration in this section.

Component

(1) Product name

(2) Serial number

(3) Product number

14 Chapter 2 Getting to know your computer

Component

(4) Warranty period

(5) Model number (select models only)

Microsoft Certificate of Authenticity label (select models only prior to Windows 8)—Contains the

●

Windows Product Key. You may need the Product Key to update or troubleshoot the operating system. HP platforms preinstalled with Windows 8 or Windows 8.1 do not have the physical label, but have a Digital Product Key electronically installed.

NOTE: This Digital Product Key is automatically recognized and activated by Microsoft

Operating Systems on a reinstall of the Windows 8 or Windows 8.1 operating system with HPapproved recovery methods.

Regulatory label(s)—Provide(s) regulatory information about the computer.

●

Wireless certification label(s)—Provide(s) information about optional wireless devices and the

●

approval markings for the countries or regions in which the devices have been approved for use.

Labels 15

3 Connecting to a network

Your computer can travel with you wherever you go. But even at home, you can explore the globe and access information from millions of websites using your computer and a wired or wireless network connection. This chapter will help you get connected to that world.

Connecting to a wireless network

Wireless technology transfers data across radio waves instead of wires. Your computer may be equipped with one or more of the following wireless devices:

Wireless local area network (WLAN) device—Connects the computer to wireless local area

●

networks (commonly referred to as Wi-Fi networks, wireless LANs, or WLANs) in corporate offices, your home, and public places such as airports, restaurants, coffee shops, hotels, and universities. In a WLAN, the mobile wireless device in your computer communicates with a wireless router or a wireless access point.

HP Mobile Broadband Module (select models only)—A wireless wide area network (WWAN)

●

device that gives you wireless connectivity over a much larger area. Mobile network operators install base stations (similar to cell phone towers) throughout large geographic areas, effectively providing coverage across entire states, regions, or even countries.

Bluetooth device (select models only)—Creates a personal area network (PAN) to connect to

●

other Bluetooth-enabled devices such as computers, phones, printers, headsets, speakers, and cameras. In a PAN, each device communicates directly with other devices, and devices must be relatively close together—typically within 10 meters (approximately 33 feet) of each other.

For more information about wireless technology, the Internet, and networking, see the information and website links provided in Help and Support. From the Start screen, type help, and then select Help and Support.

Using the wireless controls

You can control the wireless devices in your computer using one or more of these features:

Wireless button, wireless switch, wireless key, or airplane mode key (referred to in this chapter

●

as the wireless button) (select models only)

Operating system controls

●

Using the wireless button

The computer has a wireless button, one or more wireless devices, and, on select models, one or two wireless lights. All the wireless devices on your computer are enabled at the factory, and if your computer has a wireless light, the wireless light is on (white) when you turn on the computer.

The wireless light indicates the overall power state of your wireless devices, not the status of individual devices. If the wireless light is white, at least one wireless device is on. If the wireless light is off, all wireless devices are off.

NOTE: On some models, the wireless light is amber when all wireless devices are off.

Because the wireless devices are enabled at the factory, you can use the wireless button to turn on or turn off the wireless devices simultaneously.

16 Chapter 3 Connecting to a network

Using operating system controls

The Network and Sharing Center allows you to set up a connection or network, connect to a network, and diagnose and repair network problems.

To use operating system controls:

1. From the Start screen, type control panel, and then select Control Panel.

2. Select Network and Internet, and then select Network and Sharing Center.

For more information, from the Start screen, type help, and then select Help and Support.

Sharing data and drives and accessing software

When your computer is part of a network, you are not limited to using only the information that is stored in your computer. Network computers can exchange software and data with each other.

NOTE: When a disc like a DVD movie or game is copy-protected, it cannot be shared.

To share folders or content on the same network:

1. From the Windows desktop, open File Explorer.

2. From This PC, click a folder with content you want to share. Select Share from the navigation

bar at the top of the window, and then click Specific people.

3. Type a name in the File Sharing box, and then click Add.

4. Click Share and then follow the on-screen instructions.

To share drives on the same network:

1. From the Windows desktop, right-click the network status icon in the notification area, at the far

right of the taskbar.

2. Select Open Network and Sharing Center.

3. Under View your active networks, select an active network.

4. Select Change advanced sharing settings to set sharing options for privacy, network discovery,

file and printer sharing or other network options.

Using a WLAN

With a WLAN device, you can access a wireless local area network (WLAN), which is composed of other computers and accessories that are linked by a wireless router or a wireless access point.

NOTE: The terms

A large-scale WLAN, such as a corporate or public WLAN, typically uses wireless access points

●

that can accommodate a large number of computers and accessories and can separate critical network functions.

A home or small office WLAN typically uses a wireless router, which allows several wireless and

●

wired computers to share an Internet connection, a printer, and files without requiring additional pieces of hardware or software.

wireless router

and

wireless access point

are often used interchangeably.

To use the WLAN device in your computer, you must connect to a WLAN infrastructure (provided through a service provider or a public or corporate network).

Connecting to a wireless network 17

Using an Internet service provider

When you are setting up Internet access in your home, you must establish an account with an Internet service provider (ISP). To purchase Internet service and a modem, contact a local ISP. The ISP will help set up the modem, install a network cable to connect your wireless router to the modem, and test the Internet service.

NOTE: Your ISP will give you a user ID and a password to use for Internet access. Record this

information and store it in a safe place.

Setting up a WLAN

To set up a WLAN and connect to the Internet, you need the following equipment:

A broadband modem (either DSL or cable) (1) and high-speed Internet service purchased from

●

an Internet service provider

A wireless router (2) (purchased separately)

●

A wireless computer (3)

●

NOTE: Some modems have a built-in wireless router. Check with your ISP to determine what type

of modem you have.

The illustration below shows an example of a wireless network installation that is connected to the Internet.

As your network grows, additional wireless and wired computers can be connected to the network to access the Internet.

For help in setting up your WLAN, see the information provided by your router manufacturer or your ISP.

Configuring a wireless router

For help in configuring a wireless router, see the information provided by your router manufacturer or your ISP.

NOTE: It is recommended that you initially connect your new wireless computer to the router by

using the network cable provided with the router. When the computer successfully connects to the Internet, disconnect the cable, and access the Internet through your wireless network.

18 Chapter 3 Connecting to a network

Protecting your WLAN

When you set up a WLAN or access an existing WLAN, always enable security features to protect your network from unauthorized access. WLANs in public areas (hotspots) like coffee shops and airports may not provide any security. If you are concerned about the security of your computer when connected to a hotspot, limit your network activities to email that is not confidential and basic Internet surfing.

Wireless radio signals travel outside the network, so other WLAN devices can pick up unprotected signals. Take the following precautions to protect your WLAN:

Use a firewall.

●

A firewall checks information and requests that are sent to your network, and discards any suspicious items. Firewalls are available in both software and hardware. Some networks use a combination of both types.

Use wireless encryption.

●

Wireless encryption uses security settings to encrypt and decrypt data that is transmitted over the network. For more information, from the Start screen, type help, and then select Help and Support.

Connecting to a WLAN

To connect to the WLAN, follow these steps:

1. Be sure that the WLAN device is on.

2. From the Start screen, point to the far-right upper or lower corner of the screen to display the

charms.

3. Select Settings, and then click the network status icon.

4. Select your WLAN from the list.

5. Click Connect.

If the WLAN is a security-enabled WLAN, you are prompted to enter a security code. Type the code, and then click Sign in to complete the connection.

NOTE: If no WLANs are listed, you may be out of range of a wireless router or access point.

NOTE: If you do not see the WLAN you want to connect to, from the Windows desktop, right-

click the network status icon, and then select Open Network and Sharing Center. Click Set up a new connection or network. A list of options is displayed, allowing you to manually search for and connect to a network or to create a new network connection.

6. Follow the on-screen instructions to complete the connection.

After the connection is made, place the mouse pointer over the network status icon in the notification area, at the far right of the taskbar, to verify the name and status of the connection.

NOTE: The functional range (how far your wireless signals travel) depends on WLAN

implementation, router manufacturer, and interference from other electronic devices or structural barriers such as walls and floors.

Connecting to a wireless network 19

Using HP Mobile Broadband (select models only)

HP Mobile Broadband enables your computer to use WWANs to access the Internet from more places and over larger areas than it can by using WLANs. Using HP Mobile Broadband requires a network service provider (called a network operator. Coverage for HP Mobile Broadband is similar to cellular phone voice coverage.

When used with mobile network operator service, HP Mobile Broadband gives you the freedom to stay connected to the Internet, send email, or connect to your corporate network whether you are on the road or outside the range of Wi-Fi hotspots.

You might need the HP Mobile Broadband Module IMEI and/or MEID number to activate mobile broadband service.The serial number is printed on a label located on the bottom of your computer.

Some mobile network operators require the use of a subscriber identity module (SIM). A SIM contains basic information about you, such as a personal identification number (PIN), as well as network information. Some computers include a SIM that is preinstalled in the battery bay. If the SIM is not preinstalled, it may be provided in the HP Mobile Broadband information provided with your computer or the mobile network operator may provide it separately from the computer.

mobile network operator

), which in most cases is a cellular phone

For information about inserting and removing the SIM, see the

on page 21 section in this chapter.

For information about HP Mobile Broadband and how to activate service with a preferred mobile network operator, see the HP Mobile Broadband information included with your computer.

Inserting and removing a SIM

20 Chapter 3 Connecting to a network

Inserting and removing a SIM

CAUTION: To prevent damage to the connectors, use minimal force when inserting a SIM.

To insert a SIM, follow these steps:

1. Shut down the computer.

2. Close the display.

3. Disconnect all external devices connected to the computer.

4. Unplug the power cord from the AC outlet.

5. Turn the computer so that the left side is facing toward you.

6. Open the SIM card tray..

7. Insert the SIM into the SIM slot, and then gently push the SIM tray into the computer until it is

firmly seated.

NOTE: The SIM in your computer may look slightly different from the illustration in this section.

NOTE: See the image on the SIM card tray to determine which way the SIM should be inserted

into your computer.

8. Reconnect external power.

9. Reconnect external devices.

10. Turn on the computer.

To remove a SIM, follow the instructions above to eject the SIM card tray, and then remove the SIM from the tray.

IMPORTANT: After removing the SIM card, immediately close the SIM card tray to avoid damage to

your computer.

Connecting to a wireless network 21

Using Bluetooth wireless devices (select models only)

A Bluetooth device provides short-range wireless communications that replace the physical cable connections that traditionally link electronic devices such as the following:

Computers (desktop, notebook, PDA)

●

Phones (cellular, cordless, smart phone)

●

Imaging devices (printer, camera)

●

Audio devices (headset, speakers)

●

Mouse

●

Bluetooth devices provide peer-to-peer capability that allows you to set up a PAN of Bluetooth devices. For information about configuring and using Bluetooth devices, see the Bluetooth software Help.

Connecting to a wired network (select models only)

Connecting to a local area network (LAN)

IMPORTANT: A USB-to-RJ-45 adapter (purchased separately) is required to connect your

computer to a wired network.

Use a LAN connection if you want to connect the computer directly to a router in your home (instead of working wirelessly), or if you want to connect to an existing network at your office.

Connecting to a LAN requires an 8-pin, RJ-45 (network) cable.

To connect the network cable, follow these steps:

1. Plug the network cable into the network jack (1) on the computer.

2. Plug the other end of the network cable into a network wall jack (2) or router.

NOTE: If the network cable contains noise suppression circuitry (3), which prevents

interference from TV and radio reception, orient the circuitry end of the cable toward the computer.

22 Chapter 3 Connecting to a network

4 Enjoying entertainment features

Use your HP computer as an entertainment hub to socialize via the webcam, enjoy and manage your music, and download and watch movies. Or, to make your computer an even more powerful entertainment center, connect external devices like a monitor, projector, or TV, or speakers and headphones.

Multimedia features

Here are some of the entertainment features on your computer.

Component Description

(1) Internal microphones (2) Record sound.

(2) Webcam light On: The webcam is in use.

(3) Webcam Records video and captures photographs. Some

models allow you to video conference and chat online using streaming video.

From the Start screen, type camera, and then select Camera from the list of applications.

(4)

HDMI port Connects an optional video or audio device, such as

a high-definition television, any compatible digital or audio component, or a high-speed HDMI device.

Multimedia features 23

Component Description

(5)

(6)

(7)

USB 3.0 ports Each USB 3.0 port connects an optional USB

device, such as a keyboard, mouse, external drive, printer, scanner or USB hub.

USB 2.0 port Connects an optional USB device, such as a

Audio-out (headphone)/Audio-in (microphone) jack

keyboard, mouse, external drive, printer, scanner or USB hub.

WARNING! To reduce the risk of personal injury,

adjust the volume before putting on headphones, earbuds, or a headset. For additional safety information, refer to the

Environmental Notices

the Start screen, type support, and then select the HP Support Assistant app.

NOTE: When a device is connected to the jack,

the computer speakers are disabled.

NOTE: Be sure that the device cable has a 4-

conductor connector that supports both audio-out (headphone) and audio-in (microphone).

(8) Speakers Produce sound.

Regulatory, Safety, and

. To access this guide, from

(9)

(10)

Memory card reader Reads optional memory cards that store, manage,

share, or access information.

To insert a card:

Hold the card label-side up, with connectors facing the slot, insert the card into the slot, and then push in on the card until it is firmly seated.

To remove a card:

Press in on the card it until it pops out.

SIM Card slot (select models only) A slot for a SIM card.

NOTE: This feature is available on select models

only.

24 Chapter 4 Enjoying entertainment features

Using the webcam

The computer has an integrated webcam that records video and captures photographs. Some models may allow you to video conference and chat online using streaming video.

To start the webcam, from the Start screen, type camera, and then select Camera from the list

▲

of applications.

For details about using the webcam, go to Help and Support. From the Start screen, type help, and then select Help and Support.

Using audio

On your computer, or on select models using an external optical drive, you can play music CDs, download and listen to music, stream audio content from the web (including radio), record audio, or mix audio and video to create multimedia. To enhance your listening enjoyment, attach external audio devices such as speakers or headphones.

Connecting headphones and microphones

You can connect wired headphones or headsets to the audio-out (headphone)/audio-in (microphone) jack on your computer. Many headsets with integrated microphones are commercially available.

To connect instructions.

WARNING! To reduce the risk of personal injury, lower the volume setting before putting on

headphones, earbuds, or a headset. For additional safety information, see the

Environmental Notices

the HP Support Assistant app.

wireless

headphones or headsets to your computer, follow the device manufacturer's

Regulatory, Safety and

. To access this guide, from the Start screen, type support, and then select

Using the webcam 25

Testing your audio features

To check the audio functions on your computer, follow these steps:

1. From the Start screen, type control panel, and then select Control Panel.

2. Select Hardware and Sound, and then select Sound.

3. When the Sound window opens, select the Sounds tab. Under Program Events, select any

sound event, such as a beep or alarm, and then click Test.

You should hear sound through the speakers or through connected headphones.

To check the recording functions on your computer, follow these steps:

1. From the Start screen, type sound, and then select Sound Recorder.

2. Click Start Recording and speak into the microphone.

3. Save the file to your desktop.

4. Open a multimedia program and play the recording.

To confirm or change the audio settings on your computer, follow these steps:

1. From the Start screen, type control panel, and then select Control Panel.

2. Select Hardware and Sound, and then select Sound.

Using video

Your computer is a powerful video device that enables you to watch streaming video from your favorite websites and download video and movies to watch on your computer when you are not connected to a network.

To enhance your viewing enjoyment, use one of the video ports on the computer to connect an external monitor, projector, or TV.

IMPORTANT: Be sure that the external device is connected to the correct port on the computer,

using the correct cable. Check the device manufacturer's instructions.

26 Chapter 4 Enjoying entertainment features

Connecting video devices by using an HDMI cable

NOTE: To connect an HDMI device to your computer, you need an HDMI cable, sold separately.

To see the computer screen image on a high-definition TV or monitor, connect the high-definition device according to the following instructions.

1. Connect one end of the HDMI cable to the HDMI port on the computer.

2. Connect the other end of the cable to the high-definition TV or monitor.

3. Press f4 to alternate the computer screen image between 4 display states:

PC screen only: View the screen image on the computer only.

●

Duplicate: View the screen image simultaneously on both the computer and the external

●

device.

Extend: View the screen image extended across both the computer and the external

●

device.

Second screen only: View the screen image on the external device only.

●

Each time you press f4, the display state changes.

NOTE: For best results, especially if you choose the “Extend” option, adjust the screen

resolution of the external device, as follows. From the Start screen, type control panel, and then select Control Panel. Select Appearance and Personalization. Under Display, select Adjust screen resolution.

Using video 27

Setting up HDMI audio

HDMI is the only video interface that supports high-definition video and audio. After you connect an HDMI TV to the computer, you can then turn on HDMI audio by following these steps:

1. From the Windows desktop, right-click the Speakers icon in the notification area, at the far right

of the taskbar, and then select Playback devices.

2. On the Playback tab, select the name of the digital output device.

3. Click Set Default, and then click OK.

To return the audio stream to the computer speakers:

1. From the Windows desktop, right-click the Speakers icon in the notification area, at the far right

of the taskbar, and then click Playback devices.

2. On the Playback tab, click Speakers.

3. Click Set Default, and then click OK.

Discovering and connecting to Miracast-compatible wireless displays (select models only)

To discover and connect to Miracast-compatible wireless displays without leaving your current apps, follow the steps below.

To open Miracast:

Point to the upper-right or lower-right corner of the Start screen to display the charms, click

▲

Devices, click Project, and then follow the on-screen instructions.

– or –

On select computer models, from the Start screen, click the HP Quick Access to Miracast icon, and then follow the on-screen instructions.

28 Chapter 4 Enjoying entertainment features

5 Navigating the screen

You can navigate the computer screen in the following ways:

Touch gestures

●

Keyboard and mouse

●

Touch gestures can be used on your computer's TouchPad or on a touch screen (select models only).

NOTE: An external USB mouse (purchased separately) can be connected to one of the USB ports

on the computer.

Select computer models have special action keys or hot key functions on the keyboard to perform routine tasks.

Some computer models may also have an integrated numeric keypad.

Using the TouchPad and gestures

The TouchPad allows you to navigate the computer screen and control the pointer by using simple finger movements. You can customize the touch gestures by changing settings, button configurations, click speed, and pointer options. You can also view demonstrations of TouchPad gestures.

From the Start screen, type control panel, select Control Panel, and then select Hardware and Sound. Under Devices and Printers, select Mouse.

TIP: Use the left and right buttons on the TouchPad as you would use the corresponding buttons on

an external mouse.

NOTE: TouchPad gestures are not supported in all apps.

Using the TouchPad and gestures 29

Tapping

To make an on-screen selection, use the tap function on the TouchPad.

Point to an item on the screen, and then tap one finger on the TouchPad zone to make a

●

selection. Double-tap an item to open it.

30 Chapter 5 Navigating the screen

Scrolling

Scrolling is useful for moving up, down, or sideways on a page or image.

Place two fingers slightly apart on the TouchPad zone and then drag them up, down, left, or

●

right.

Using the TouchPad and gestures 31

2-finger pinch zoom

2-finger pinch zoom allows you to zoom out or in on images or text.

Zoom out by placing two fingers apart on the TouchPad zone and then moving your fingers

●

together.

Zoom in by placing two fingers together on the TouchPad zone and then moving your fingers

●

apart.

32 Chapter 5 Navigating the screen

2-finger click

2-finger click allows you to make menu selections for an object on the screen.

NOTE: Using 2-finger click is the same action as using right-click with the mouse.

Place two fingers on the TouchPad zone and press down to open the options menu for the

●

selected object.

Using the TouchPad and gestures 33

Rotating (select models only)

Rotating allows you to turn items such as photos.

Place two separated fingers on the TouchPad zone. Move both fingers in an arching motion

●

while maintaining uniform separation. A clockwise arching motion initiates a right rotation and a counter-clockwise motion initiates a left rotation.

NOTE: Rotate is intended for specific apps where you can manipulate an object or image. Rotate

may not be functional for all apps.

34 Chapter 5 Navigating the screen

Edge swipes

Edge swipes allow you to perform tasks such as changing settings and finding or using apps.

Display and select a charm

With the charms, you can search, share, start apps, access devices, or change settings.

1. With your finger, swipe from the right side of the TouchPad.

2. Scroll up or down to switch between the charms, and then select the charm you want to open.

Using the TouchPad and gestures 35

Display the Customize icon

The top-edge swipe allows you to display the Customize icon at the bottom of the Start screen. Customize allows you to move, resize, pin and unpin apps.

IMPORTANT: When an app is active, the top-edge gesture varies depending on the app.

Swipe your finger gently from the top edge of the TouchPad zone to reveal the Customize icon.

●

36 Chapter 5 Navigating the screen

Switch between open apps

The left-edge swipe accesses your recently opened apps so that you can switch between them quickly.

Swipe your finger gently from the left edge of the TouchPad.

●

Using the TouchPad and gestures 37

Using the keyboard and mouse

The keyboard and optional mouse (purchased separately) allow you to type, select items, scroll and to perform the same functions as you do using touch gestures. The keyboard also allows you to use action keys and hot keys to perform specific functions.

TIP: The Windows key on the keyboard allows you to quickly return to the Start screen from

an open app or the Windows desktop. Pressing the Windows key again will return you to the previous screen.

NOTE: Depending on the country or region, your keyboard may have different keys and keyboard

functions than those discussed in this section.

Using the keys

You can quickly access information or perform functions by using certain keys and key combinations.

Using the action keys

An action key performs an assigned function. The icon on each of the function keys illustrates the assigned function for that key.

To use an action key function, press and hold the key.

CAUTION: Use extreme care when making changes in Setup Utility (BIOS). Errors can prevent the

computer from operating properly.

The action key feature is enabled at the factory. You can disable this feature in Setup Utility (BIOS).

Using Setup Utility (BIOS) and HP PC Hardware Diagnostics (UEFI) on page 56 for

See instructions on opening Setup Utility (BIOS), and then follow the instructions at the bottom of the screen.

After you have disabled the action key feature, you can still perform each function by pressing the fn key in combination with the appropriate action key.

Icon Key Description

f1 Opens Help and Support, which provides tutorials, information about the Windows

f2 Decreases the screen brightness incrementally as long as you hold down the key.

f3 Increases the screen brightness incrementally as long as you hold down the key.

f4 Switches the screen image between display devices connected to the system. For

operating system and your computer, answers to questions, and updates to your computer.

Help and Support also provides automated troubleshooting tools and access to support.

example, if a monitor is connected to the computer, repeatedly pressing this key alternates the screen image from the computer display to the monitor display to a simultaneous display on both the computer and the monitor.

f6 Mutes or restores speaker sound.

38 Chapter 5 Navigating the screen

Icon Key Description

f7 Decreases speaker volume incrementally as long as you hold down the key.

f8 Increases speaker volume incrementally as long as you hold down the key.

f9 Plays the previous track of an audio CD or the previous section of a DVD or a BD.

f10 Begins, pauses, or resumes playback of an audio CD, a DVD, or a BD.

f11 Plays the next track of an audio CD or the next section of a DVD or a BD.

f12 Turns the Airplane mode and wireless feature on or off.

Using Windows shortcut keys

Windows provides shortcuts so that you can perform actions quickly. Press the Windows key

NOTE: A wireless network must be set up before a wireless connection is possible.

alone or in combination with a specific key to perform a designated action.

Using the hot keys

A hot key is a combination of the fn key and the esc key, or the spacebar.

To use a hot key:

Briefly press the fn key, and then briefly press the second key of the combination.

▲

Using the keyboard and mouse 39

6 Managing power

Your computer can operate on either battery power or external power. When the computer is running on battery power only and an AC power source is not available to charge the battery, it is important to monitor and conserve the battery charge. Your computer supports an optimal power plan to manage how your computer uses and conserves power so that computer performance is balanced with power conservation.

Initiating Sleep and Hibernation

Windows has two power-saving states, Sleep and Hibernation.

Sleep—The Sleep state is automatically initiated after a period of inactivity when running on

●

battery power or on external power. Your work is saved to memory, allowing you to resume your work very quickly. You can also initiate Sleep manually. For more information, see

initiating and exiting Sleep on page 41.

Hibernation—The Hibernation state is automatically initiated if the battery reaches a critical level.

●

In the Hibernation state, your work is saved to a hibernation file and the computer powers down.

NOTE: You can manually initiate Hibernation. See Manually initiating and exiting Sleep on page 41 and Manually initiating and exiting Hibernation (select models only) on page 41.

Manually

CAUTION: To reduce the risk of possible audio and video degradation, loss of audio or video

playback functionality, or loss of information, do not initiate Sleep while reading from or writing to a disc or an external media card.

NOTE: You cannot initiate any type of networking connection or perform any computer functions

while the computer is in the Sleep state or in Hibernation.

40 Chapter 6 Managing power

Manually initiating and exiting Sleep

You can initiate Sleep in any of the following ways:

Close the display.

●

From the Start screen, point to the upper-right or lower-right corner of the screen to reveal the

●

charms. Click Settings, click the Power icon, and then click Sleep.

To exit Sleep:

Briefly press the power button.

●

If the display is closed, open the display.

●

Press a key on the keyboard.

●

Tap or swipe the TouchPad.

●

When the computer exits Sleep, the power lights turn on and your work returns to the screen.

NOTE: If you have set a password to be required on wakeup, you must enter your Windows

password before the computer will return to the screen.

Manually initiating and exiting Hibernation (select models only)

You can enable user-initiated Hibernation and change other power settings and timeouts using Power Options.

1. From the Start screen, type power options, then select Power options.

2. In the left pane, click Choose what the power button does.

3. Click Change Settings that are currently unavailable.

4. In the When I press the power button area, select Hibernate.

5. Click Save changes.

When the computer exits Hibernation, the power lights turn on and your work returns to the screen.

NOTE: If you have set a password to be required on wakeup, you must enter your Windows

password before your work will return to the screen.

Setting password protection on wakeup

To set the computer to prompt for a password when the computer exits Sleep or Hibernation, follow these steps:

1. From the Start screen, type power options, then select Power options.

2. In the left pane, click Require a password on wakeup.

3. Click Change Settings that are currently unavailable.

4. Click Require a password (recommended).

NOTE: If you need to create a user account password or change your current user account

password, click Create or change your user account password, and then follow the on-screen instructions. If you do not need to create or change a user account password, go to step 5.

5. Click Save changes.

Initiating Sleep and Hibernation 41

Using the power meter and power settings

The power meter is located on the Windows desktop. The power meter allows you to quickly access power settings and view the remaining battery charge.

To reveal the percentage of remaining battery charge and the current power plan, on the

●

Windows desktop, point over the power meter icon.

To use Power Options, click the power meter icon and select an item from the list. From the

●

Start screen, you can also type power options, and then select Power Options.

Different power meter icons indicate whether the computer is running on battery or external power. The icon also reveals a message if the battery has reached a low or critical battery level.

Running on battery power

When a charged battery is in the computer and the computer is not plugged into external power, the computer runs on battery power. The battery in the computer slowly discharges when the computer is off and unplugged from external power.

Computer battery life varies, depending on power management settings, programs running on the computer, screen brightness, external devices connected to the computer, and other factors.

Factory-sealed battery

To monitor the status of your battery, or if the battery is no longer holding a charge, run Battery Check in HP Support Assistant. To access battery information, from the Start screen, type support, select the HP Support Assistant app, and then select Battery and performance. If Battery Check indicates that your battery should be replaced, contact support.

The battery(ies) in this product cannot be easily replaced by users themselves. Removing or replacing the battery could affect your warranty coverage. If a battery is no longer holding a charge, contact support.

When a battery has reached the end of its useful life, do not dispose of the battery in general household waste. Follow the local laws and regulations in your area for battery disposal.

Finding battery information

HP Support Assistant provides the following tools and information about the battery:

Battery test

●

Information about battery types, specifications, life cycles, and capacity

●

42 Chapter 6 Managing power

Conserving battery power

Tips for conserving battery power and maximizing battery life:

Lower the brightness on the display.

●

Select the Power saver setting in Power Options.

●

Turn off wireless devices when you are not using them.

●

Disconnect unused external devices that are not plugged into an external power source, such as

●

an external hard drive connected to a USB port.

Stop, disable, or remove any external media cards that you are not using.

●

Before you leave your work, initiate Sleep or shut down the computer.

●

Identifying low battery levels

When a battery that is the sole power source for the computer reaches a low or critical battery level, the following behavior occurs:

The battery light (select models only) indicates a low or critical battery level.

●

– or –

The power meter icon on the Windows desktop shows a low or critical battery notification.

●

NOTE: For additional information about the power meter, see Using the power meter and power settings on page 42.

The computer takes the following actions for a critical battery level:

If Hibernation is disabled and the computer is on or in the Sleep state, the computer remains

●

briefly in the Sleep state, and then shuts down and loses any unsaved information.

If Hibernation is enabled and the computer is on or in the Sleep state, the computer initiates

●

Hibernation.

Resolving a low battery level

Resolving a low battery level when external power is available

Connect an AC adapter.

●

Connect an optional docking or expansion device.

●

Connect an optional power adapter purchased as an accessory from HP.

●

Resolving a low battery level when no power source is available

Save your work and shut down the computer.

Resolving a low battery level when the computer cannot exit Hibernation

When the computer lacks sufficient power to exit Hibernation, follow these steps:

1. Connect the AC adapter to the computer and to external power.

2. Exit Hibernation by pressing the power button.

Running on battery power 43

Running on external AC power

For information about connecting to AC power, refer to the computer box.

The computer does not use battery power when the computer is connected to AC external power with an approved AC adapter or an optional docking/expansion device.

WARNING! To reduce potential safety issues, use only the AC adapter provided with the computer,

a replacement AC adapter provided by HP, or a compatible AC adapter purchased from HP.

Connect the computer to external AC power under any of the following conditions:

WARNING! Do not charge the computer battery while you are onboard aircraft.

When charging or calibrating a battery

●

When installing or modifying system software

●

When writing information to a disc (select models only)

●

When running Disk Defragmenter on computers with internal hard drives

●

When performing a backup or recovery

●

When you connect the computer to external AC power:

The battery begins to charge.

●

The screen brightness increases.

●

The power meter icon on the Windows desktop changes appearance.

●

Setup Instructions

poster provided in the

When you disconnect external AC power, the following events occur:

The computer switches to battery power.

●

The screen brightness automatically decreases to save battery life.

●

The power meter icon on the Windows desktop changes appearance.

●

44 Chapter 6 Managing power

Troubleshooting power problems

Test the AC adapter if the computer exhibits any of the following symptoms when it is connected to AC power:

The computer does not turn on.

●

The display does not turn on.

●

The power lights are off.

●

To test the AC adapter:

1. Shut down the computer.

2. Connect the AC adapter to the computer, and then plug it into an AC outlet.

3. Turn on the computer.

If the power lights turn

●

If the power lights remain

●

and the connection from the AC adapter to the AC outlet to be sure that the connections are secure.

If the connections are secure and the power lights remain

●

functioning and should be replaced.

Contact support for information about obtaining a replacement AC power adapter.

, the AC adapter is working properly.

off

, check the connection from the AC adapter to the computer

off

, the AC adapter is not

Running on external AC power 45

Shutting down (turning off) the computer

CAUTION: Unsaved information is lost when the computer shuts down. Be sure to save your work

before shutting down the computer.

The Shut down command closes all open programs, including the operating system, and then turns off the display and computer.

Shut down the computer under any of the following conditions:

When you are connecting an external hardware device that does not connect to a USB or video

●

port

When the computer will be unused and disconnected from external power for an extended

●

period

Although you can turn off the computer with the power button, the recommended procedure is to use the Windows Shut down command:

NOTE: If the computer is in the Sleep state or in Hibernation, you must first exit Sleep or

Hibernation before shutdown is possible by briefly pressing the power button.

1. Save your work and close all open programs.

2. From the Start screen, point to the upper-right or lower-right corner of the screen to reveal the

charms.

3. Click Settings, click the Power icon, and then click Shut down.

– or –

Right-click the Start button in the lower-left corner of the screen, select Shut down or sign out, and then select Shut down.

If the computer is unresponsive and you are unable to use the preceding shutdown procedures, try the following emergency procedures in the sequence provided:

Press ctrl+alt+delete, click the Power icon, and then select Shut Down.

●

Press and hold the power button for at least 5 seconds.

●

Disconnect the computer from external power.

●

46 Chapter 6 Managing power

7 Maintaining your computer

It is important to perform regular maintenance to keep your computer in optimal condition by using tools like Disk Defragmenter and Disk Cleanup. This chapter also includes ways to update programs and drivers, steps to clean the computer, and tips for traveling with (or shipping) the computer.

Improving performance

You can improve the performance of your computer by performing regular maintenance tasks with tools such as Disk Defragmenter and Disk Cleanup.

Handling drives

Observe these precautions when handling drives:

Before removing or installing a drive, shut down the computer. If you are unsure whether the

●

computer is off, in the Sleep state, or in Hibernation, turn the computer on, and then shut it down.

Before handling a drive, discharge static electricity by touching a grounded surface.

●

Do not touch the connector pins on a removable drive or on the computer.

●

Do not use excessive force when inserting a drive into a drive bay.

●

If a drive must be mailed, place the drive in a bubble-pack mailer or other suitable protective

●

packaging and label the package “FRAGILE.”

Avoid exposing a drive to magnetic fields. Security devices with magnetic fields include airport

●

walk-through devices and security wands. Airport conveyer belts and similar security devices that check carry-on baggage use X-rays instead of magnetism and do not damage drives.

Remove media from a drive before removing the drive from the drive bay, or traveling with,

●

shipping, or storing a drive.

Do not type on the keyboard or move the computer while an optical drive is writing to a disc. The

●

write process is sensitive to vibration.

Before you move a computer that is connected to an external hard drive, initiate Sleep and allow

●

the screen to clear, or properly disconnect the external hard drive.

Using Disk Cleanup

Disk Cleanup searches the hard drive for unnecessary files that you can safely delete to free up disk space and help the computer run more efficiently.

To run Disk Cleanup:

1. From the Start screen, select disk, and then select Manage your apps to free up disk space.

2. Follow the on-screen instructions.

Improving performance 47

Updating programs and drivers

HP recommends that you update your programs and drivers on a regular basis. Updates can resolve issues and bring new features and options to your computer. For example, older graphics components might not work well with the most recent gaming software. Without the latest driver, you would not be getting the most out of your equipment.

http://www.hp.com/support to download the latest versions of HP programs and drivers. In

Go to addition, register to receive automatic update notifications when they become available.

If you would like to update your program and drivers, follow these instructions:

1. From the Start screen, type support, and then select the HP Support Assistant app.

2. Click Updates and tune-ups, and then click Check for HP updates now.

3. Follow the on-screen instructions.

Cleaning your computer

Use the following products to safely clean your computer:

Dimethyl benzyl ammonium chloride 0.3 percent maximum concentration (for example,

●

disposable wipes, which come in a variety of brands).

Alcohol-free glass-cleaning fluid

●

Water with mild soap solution

●

Dry microfiber cleaning cloth or a chamois (static-free cloth without oil)

●

Static-free cloth wipes

●

CAUTION: Avoid strong cleaning solvents that can permanently damage your computer. If you are

not sure that a cleaning product is safe for your computer, check the product contents to make sure that ingredients such as alcohol, acetone, ammonium chloride, methylene chloride, and hydrocarbons are not included in the product.

Fibrous materials, such as paper towels, can scratch the computer. Over time, dirt particles and cleaning agents can get trapped in the scratches.

Cleaning procedures

Follow the procedures in this section to safely clean your computer.

WARNING! To prevent electric shock or damage to components, do not attempt to clean your

computer while it is turned on.

Turn off the computer.

●

Disconnect AC power.

●

Disconnect all powered external devices.

●

CAUTION: To prevent damage to internal components, do not spray cleaning agents or liquids

directly on any computer surface. Liquids dripped on the surface can permanently damage internal components.

48 Chapter 7 Maintaining your computer

Cleaning the display (All-in-Ones or Notebooks)

Gently wipe the display using a soft, lint-free cloth moistened with an alcohol-free glass cleaner. Be sure that the display is dry before closing the display.

Cleaning the sides or cover

To clean the sides or cover, use a soft microfiber cloth or chamois moistened with one of the cleaning solutions listed previously or use an acceptable disposable wipe.

NOTE: When cleaning the cover of the computer, use a circular motion to aid in removing dirt and

debris.

Cleaning the TouchPad, keyboard, or mouse

WARNING! To reduce the risk of electric shock or damage to internal components, do not use a

vacuum cleaner attachment to clean the keyboard. A vacuum cleaner can deposit household debris on the keyboard surface.

CAUTION: To prevent damage to internal components, do not allow liquids to drip between the

keys.

To clean the TouchPad, keyboard, or mouse, use a soft microfiber cloth or a chamois moistened

●

with one of the cleaning solutions listed previously or use an acceptable disposable wipe.

To prevent keys from sticking and to remove dust, lint, and particles from the keyboard, use a

●

can of compressed air with a straw extension.

Cleaning your computer 49

Traveling with or shipping your computer

If you have to travel with or ship your computer, here are some tips to keep in mind to keep your equipment safe.

Prepare the computer for traveling or shipping:

●

Back up your information to an external drive.

◦

Remove all discs and all external media cards, such as memory cards.

◦

Turn off and then disconnect all external devices.

◦

Shut down the computer.

◦

Take along a backup of your information. Keep the backup separate from the computer.

●

When traveling by air, carry the computer as hand luggage; do not check it in with the rest of

●

your luggage.

CAUTION: Avoid exposing a drive to magnetic fields. Security devices with magnetic fields

include airport walk-through devices and security wands. Airport conveyer belts and similar security devices that check carry-on baggage use X-rays instead of magnetism and do not damage drives.

If you plan to use the computer during a flight, listen for the in-flight announcement that tells you

●

when you are allowed to use your computer. In-flight computer use is at the discretion of the airline.

If you are shipping the computer or a drive, use suitable protective packaging and label the

●

package “FRAGILE.”

If the computer has a wireless device installed, the use of these devices may be restricted in

●

some environments. Such restrictions may apply aboard aircraft, in hospitals, near explosives, and in hazardous locations. If you are uncertain of the policy that applies to the use of a particular device, ask for authorization to use your computer before you turn it on.

If you are traveling internationally, follow these suggestions:

●

Check the computer-related customs regulations for each country or region on your

◦

itinerary.

Check the power cord and adapter requirements for each location in which you plan to use

◦

the computer. Voltage, frequency, and plug configurations vary.

WARNING! To reduce the risk of electric shock, fire, or damage to the equipment, do not

attempt to power the computer with a voltage converter kit sold for appliances.

50 Chapter 7 Maintaining your computer

8 Securing your computer and information

Computer security is essential for protecting the confidentiality, integrity, and availability of your information. Standard security solutions provided by the Windows operating system, HP applications, the non-Windows Setup Utility (BIOS), and other third-party software can help protect your computer from a variety of risks, such as viruses, worms, and other types of malicious code.

IMPORTANT: Some security features listed in this chapter may not be available on your computer.

Computer risk Security feature

Unauthorized use of the computer Power-on password

Computer viruses Antivirus software

Unauthorized access to data Firewall software

Unauthorized access to Setup Utility (BIOS) settings and other system identification information

Ongoing or future threats to the computer Software updates

Unauthorized access to a Windows user account User password

Unauthorized removal of the computer Security cable lock

Using passwords

A password is a group of characters that you choose to secure your computer information and to protect online transactions. Several types of passwords can be set. For example, when you set up your computer for the first time, you were asked to create a user password to secure your computer. Additional passwords can be set in Windows or in the HP Setup Utility (BIOS) that is preinstalled on your computer.

You may find it helpful to use the same password for a Setup Utility (BIOS) feature and for a Windows security feature.

Use the following tips for creating and saving passwords:

To reduce the risk of being locked out of the computer, record each password and store it in a

●

secure place away from the computer. Do not store passwords in a file on the computer.

When creating passwords, follow requirements set by the program.

●

Administrator password

Change your passwords at least every three months.

●

An ideal password is long and has letters, punctuation, symbols, and numbers.

●

Before you send your computer for service, back up your files, delete confidential files, and then

●

remove all password settings.

For additional information about Windows passwords, such as screen-saver passwords, from the Start screen, type support, and then select the Help and Support.

Using passwords 51

Setting Windows passwords

Password Function

User password Protects access to a Windows user account.

Administrator password Protects administrator-level access to computer contents.

Setting Setup Utility (BIOS) passwords

Password Function

NOTE: This password cannot be used to access Setup

Utility (BIOS) contents.

Administrator password

Power-on password

Must be entered each time you access Setup Utility

●

(BIOS).

If you forget your administrator password, you cannot

●

access Setup Utility (BIOS).

NOTE: The administrator password can be used in place of

the power-on password.

NOTE: Your administrator password is not interchangeable

with an administrator password set in Windows, nor is it revealed as it is set, entered, changed, or deleted.

NOTE: If you enter the power-on password at the first

password check, you must enter the administrator password to access Setup Utility (BIOS).

Must be entered each time you turn on or restart the

●

computer.

If you forget your power-on password, you cannot turn

●

on or restart the computer.

NOTE: The administrator password can be used in place of

the power-on password.

NOTE: A power-on password is not revealed as it is set,

entered, changed, or deleted.

To set, change, or delete an administrator or power-on password in Setup Utility (BIOS):

1. To start Setup Utility (BIOS), turn on or restart the computer, quickly press esc, and then press f10.

2. Use the arrow keys to select Security, and then follow the on-screen instructions.

Your changes take effect when the computer restarts.

52 Chapter 8 Securing your computer and information

Using Internet security software

When you use your computer to access email, a network, or the Internet, you potentially expose your computer to computer viruses, spyware, and other online threats. To help protect your computer, Internet security software that includes antivirus and firewall features may be preinstalled on your computer as a trial offer. To provide ongoing protection against newly discovered viruses and other security risks, security software must be kept up to date. It is strongly recommended that you upgrade the security software trial offer or purchase the software of your choice in order to fully protect your computer.

Using antivirus software

Computer viruses can disable programs, utilities, or the operating system, or cause them to function abnormally. Antivirus software can detect most viruses, destroy them, and in most cases, repair any damage they have caused.

To provide ongoing protection against newly discovered viruses, antivirus software must be kept up to date.

An antivirus program may be preinstalled on your computer. It is strongly recommended that you use the antivirus program of your choice in order to fully protect your computer.

For more information about computer viruses, from the Start screen, type support, and then select the HP Support Assistant app.

Using firewall software

Firewalls are designed to prevent unauthorized access to a system or network. A firewall can be software you install on your computer and/or network, or it can be a combination of both hardware and software.

There are two types of firewalls to consider:

Host-based firewalls—Software that protects only the computer it is installed on.

●

Network-based firewalls—Installed between your DSL or cable modem and your home network

●

to protect all the computers on the network.

When a firewall is installed on a system, all data sent to and from the system is monitored and compared with a set of user-defined security criteria. Any data that does not meet those criteria is blocked.

Installing software updates

HP, Windows, and third-party software installed on your computer should be regularly updated to correct security problems and improve software performance. For more information, see

programs and drivers on page 48.

Installing critical security updates

CAUTION: Microsoft sends out alerts regarding critical updates. To protect the computer from

security breaches and computer viruses, install all critical updates from Microsoft as soon as you receive an alert.

Updating

You can choose whether updates are installed automatically. To change the settings, from the Start screen, type control panel, and then select Control Panel. Select System and Security, select Windows Update, select Change settings, and then follow the on-screen instructions.

Using Internet security software 53

Installing HP and third-party software updates

HP recommends that you regularly update the software and drivers that were originally installed on your computer. To download the latest versions, go to you can also register to receive automatic update notifications when they become available.

If you have installed third-party software after you purchased your computer, regularly update the software. Software companies provide software updates to their products to correct security problems and improve functionality of the software.

http://www.hp.com/support. At this location,

Securing your wireless network

When you set up your wireless network, always enable security features. For more information, see

Protecting your WLAN on page 19.

Backing up your software applications and information

Regularly back up your software applications and information to protect them from being permanently lost or damaged through a virus attack or a software or hardware failure. For more information, see

Backing up, restoring, and recovering on page 59.

54 Chapter 8 Securing your computer and information

Using an optional security cable lock

A security cable lock, which is purchased separately, is designed to act as a deterrent, but it may not prevent the computer from being mishandled or stolen. Security cable locks are only one of several methods that should be employed as part of a complete security solution to help maximize theft protection.

The security cable slot on your computer may look slightly different from the illustration in this section. For the location of the security cable slot on your computer, see

on page 5.

1. Loop the security cable lock around a secured object.

2. Insert the key (1) into the security cable lock (2).

3. Insert the security cable lock into the security cable slot on the computer (3), and then lock the

security cable lock with the key.

Getting to know your computer

4. Remove the key and keep it in a safe place.

Using an optional security cable lock 55

9 Using Setup Utility (BIOS) and HP PC

Hardware Diagnostics (UEFI)

Setup Utility, or Basic Input/Output System (BIOS), controls communication between all the input and output devices on the system (such as disk drives, display, keyboard, mouse, and printer). Setup Utility (BIOS) includes settings for the types of devices installed, the startup sequence of the computer, and the amount of system and extended memory.

Starting Setup Utility (BIOS)

To start Setup Utility (BIOS), turn on or restart the computer, quickly press esc, and then press f10.

NOTE: Use extreme care when making changes in Setup Utility (BIOS). Errors can prevent the

computer from operating properly.

Updating the BIOS

Updated versions of the BIOS may be available on the HP website.

Most BIOS updates on the HP website are packaged in compressed files called

Some download packages contain a file named Readme.txt, which contains information regarding installing and troubleshooting the file.

Determining the BIOS version

To determine whether available BIOS updates contain later BIOS versions than those currently installed on the computer, you need to know the version of the system BIOS currently installed.

BIOS version information (also known as

fn+esc (if you are already in Windows) or by using Setup Utility (BIOS).

1. Start Setup Utility (BIOS) (see

2. Use the arrow keys to select Main, and then make note of your current BIOS version.

3. To exit Setup Utility (BIOS) without saving your changes, use the arrow keys to select Exit,

select Exit Discarding Changes, and then press enter.

4. Select Yes.

ROM date

Starting Setup Utility (BIOS) on page 56).

and

System BIOS

) can be revealed by pressing

SoftPaqs

56 Chapter 9 Using Setup Utility (BIOS) and HP PC Hardware Diagnostics (UEFI)

Downloading a BIOS update

CAUTION: To reduce the risk of damage to the computer or an unsuccessful installation, download

and install a BIOS update only when the computer is connected to reliable external power using the AC adapter. Do not download or install a BIOS update while the computer is running on battery power, docked in an optional docking device, or connected to an optional power source. During the download and installation, follow these instructions:

Do not disconnect power from the computer by unplugging the power cord from the AC outlet.

Do not shut down the computer or initiate Sleep.

Do not insert, remove, connect, or disconnect any device, cable, or cord.

1. From the Start screen, type support, and then select the HP Support Assistant app.

2. Click Updates and tune-ups, and then click Check for HP updates now.

3. Follow the on-screen instructions.

4. At the download area, follow these steps:

a. Identify the most recent BIOS update and compare it to the BIOS version currently installed

on your computer. If the update is more recent than your BIOS, make a note of the date, name, or other identifier. You may need this information to locate the update later, after it has been downloaded to your hard drive.

b. Follow the on-screen instructions to download your selection to the hard drive.

If the update is more recent than your BIOS, make a note of the path to the location on your hard drive where the BIOS update is downloaded. You will need to access this path when you are ready to install the update.

NOTE: If you connect your computer to a network, consult the network administrator before

installing any software updates, especially system BIOS updates.

BIOS installation procedures vary. Follow any instructions that are revealed on the screen after the download is complete. If no instructions are revealed, follow these steps:

1. From the Start screen, type file, and then select File Explorer.

2. Click your hard drive designation. The hard drive designation is typically Local Disk (C:).

3. Using the hard drive path you recorded earlier, open the folder on your hard drive that contains

the update.

4. Double-click the file that has an .exe extension (for example,

The BIOS installation begins.

5. Complete the installation by following the on-screen instructions.

NOTE: After a message on the screen reports a successful installation, you can delete the

downloaded file from your hard drive.

filename

.exe).

Updating the BIOS 57

Using HP PC Hardware Diagnostics (UEFI)

HP PC Hardware Diagnostics is a Unified Extensible Firmware Interface (UEFI) that allows you to run diagnostic tests to determine whether the computer hardware is functioning properly. The tool runs outside the operating system so that it can isolate hardware failures from issues that are caused by the operating system or other software components.

To start HP PC Hardware Diagnostics UEFI:

1. Turn on or restart the computer, quickly press esc, and then press f2.

The BIOS searches three places for the diagnostic tools, in the following order:

a. Connected USB drive

NOTE: To download the HP PC Hardware Diagnostics (UEFI) tool to a USB drive, see Downloading HP PC Hardware Diagnostics (UEFI) to a USB device on page 58.

b. Hard drive

c. BIOS

2. When the diagnostic tool opens, use the keyboard arrow keys to select the type of diagnostic

test you want to run, and then follow the on-screen instructions.

NOTE: If you need to stop a diagnostic test, press esc.

Downloading HP PC Hardware Diagnostics (UEFI) to a USB device

NOTE: Instructions for downloading HP PC Hardware Diagnostics (UEFI) are provided in English

only.

There are two options to download HP PC Hardware Diagnostics to a USB device:

Option 1: HP PC Diagnostics homepage— Provides access to the latest UEFI version

1. Go to

2. Click the UEFI Download link, and then select Run.

Option 2: Support and Drivers page—Provides downloads for a specific product for earlier and later versions

1. Go to

2. Point to Support, located at the top of the page, and then click Download Drivers.

3. In the text box, enter the product name, and then click Go.

4. Select your computer model, and then select your operating system.

5. In the Diagnostic section, click HP UEFI Support Environment.

http://hp.com/go/techcenter/pcdiags.

http://www.hp.com.

– or –

Click Find Now to let HP automatically detect your product.

– or –

Click Download, and then select Run.

58 Chapter 9 Using Setup Utility (BIOS) and HP PC Hardware Diagnostics (UEFI)

10 Backing up, restoring, and recovering

This chapter provides information about the following processes:

Creating recovery media and backups

●

Restoring and recovering your system

●

Creating recovery media and backups

1. After you successfully set up the computer, create HP Recovery media. This step creates a

backup of the HP Recovery partition on the computer. The backup can be used to reinstall the original operating system in cases where the hard drive is corrupted or has been replaced.

Creating HP Recovery media on page 59.

See

2. Use the Windows tools to create system restore points and create backups of personal

information. For more information and steps, see Help and Support. From the Start screen, type help, and then select Help and Support.

Creating HP Recovery media

HP Recovery Manager is a software program that offers a way to create recovery media after you successfully set up the computer. HP Recovery media can be used to perform system recovery if the hard drive becomes corrupted. System recovery reinstalls the original operating system and the software programs installed at the factory, and then configures the settings for the programs. HP Recovery media can also be used to customize the system or restore the factory image if you replace the hard drive.

Only one set of HP Recovery media can be created. Handle these recovery tools carefully, and

●

keep them in a safe place.

HP Recovery Manager examines the computer and determines the required storage capacity for

●

the blank USB flash drive.

Be sure that the computer is connected to AC power before you begin creating the recovery

●

media.

The creation process can take up to an hour or more. Do not interrupt the creation process.

●

To create HP Recovery media:

IMPORTANT: For tablets, connect to the keyboard dock before beginning these steps (select

models only).

1. From the Start screen, type recovery, and then select HP Recovery Manager.

2. Select Recovery Media Creation, and then follow the on-screen instructions.

If you ever need to recover the system, see

Restore and recovery

There are several options for recovering your system. Choose the method that best matches your situation and level of expertise:

Recovering using HP Recovery Manager on page 60.

Creating recovery media and backups 59

Windows offers several options for restoring from backup, refreshing the computer, and resetting

●

the computer to its original state. For more information and steps, see Help and Support. From the Start screen, type help, and then select Help and Support.

If you want to recover the computer's original factory partitioning and content, you can choose

●

the System Recovery option from the HP Recovery partition (select models only) or use the HP Recovery media that you have created. For more information, see

Recovery Manager on page 60. If you have not already created recovery media, see Creating HP Recovery media on page 59.

Recovering using HP Recovery Manager

HP Recovery Manager software allows you to recover the computer to its original factory state by using the HP Recovery media that you created or by using the HP Recovery partition (select models only). If you have not already created recovery media, see

Using HP Recovery media, you can choose from one of the following recovery options:

System Recovery—Reinstalls the original operating system, and then configures the settings for

●

the programs that were installed at the factory.

The HP Recovery partition (select models only) allows System Recovery.

What you need to know

HP Recovery Manager recovers only software that was installed at the factory. For software not

●

provided with this computer, you must either download the software from the manufacturer's website or reinstall the software from the media provided by the manufacturer.

Recovering using HP

Creating HP Recovery media on page 59.

Recovery through HP Recovery Manager should be used as a final attempt to correct computer

●

issues.

HP Recovery media must be used if the computer hard drive fails. If you have not already

●

created recovery media, see

If the HP Recovery media does not work, you can obtain recovery media for your system from

●

support. See the also find contact information from the HP website. Go to country or region, and follow the on-screen instructions.

IMPORTANT: HP Recovery Manager does not automatically provide backups of your personal

data. Before beginning recovery, back up any personal data you wish to retain.

Worldwide Telephone Numbers

Creating HP Recovery media on page 59.

booklet included with the computer. You can

http://www.hp.com/support, select your

60 Chapter 10 Backing up, restoring, and recovering

Using the HP Recovery partition (select models only)

The HP Recovery partition (select models only) allows you to perform a system recovery without the need for recovery discs or a recovery USB flash drive. This type of recovery can only be used if the hard drive is still working.

To start HP Recovery Manager from the HP Recovery partition:

IMPORTANT: For tablets, connect to the keyboard dock before beginning these steps (select

models only).

1. Press f11 while the computer boots.

– or –

Press and hold f11 as you press the power button.

2. Select Troubleshoot from the boot options menu.

3. Select Recovery Manager, and then follow the on-screen instructions.

Using HP Recovery media to recover

You can use HP Recovery media to recover the original system. This method can be used if your system does not have an HP Recovery partition or if the hard drive is not working properly.

1. If possible, back up all personal files.

2. Insert the HP Recovery media that you created, and then restart the computer.

NOTE: If the computer does not automatically restart in HP Recovery Manager, change the

computer boot order. See

3. Follow the on-screen instructions.

Changing the computer boot order

If computer does not restart in HP Recovery Manager, you can change the computer boot order, which is the order of devices listed in BIOS where the computer looks for startup information. You can change the selection for an optical drive or a USB flash drive.

To change the boot order:

1. Insert the HP Recovery media you created.

2. Restart the computer, quickly press esc, and then press f9 for boot options.

3. Select the optical drive or USB flash drive you want to boot from.

4. Follow the on-screen instructions.

Changing the computer boot order on page 61.

Restore and recovery 61

11 Specifications

Input power

The power information in this section may be helpful if you plan to travel internationally with the computer.

The computer operates on DC power, which can be supplied by an AC or a DC power source. The AC power source must be rated at 100–240 V, 50–60 Hz. Although the computer can be powered from a standalone DC power source, it should be powered only with an AC adapter or a DC power source supplied and approved by HP for use with this computer.

The computer can operate on DC power within the following specifications. Operating voltage and current varies by platform.

Input power Rating

Operating voltage and current 19.5 V dc @ 2.31 A – 45 W

DC plug of external HP power supply

19.5 V dc @ 3.33 A – 65 W

NOTE: This product is designed for IT power systems in Norway with phase-to-phase voltage not

exceeding 240 V rms.

NOTE: The computer operating voltage and current can be found on the system regulatory label.

Operating environment

Factor Metric U.S.

Temperature

Operating 5°C to 35°C 41°F to 95°F

Nonoperating -20°C to 60°C -4°F to 140°F

Relative humidity (noncondensing)

Operating 10% to 90% 10% to 90%

Nonoperating 5% to 95% 5% to 95%

Maximum altitude (unpressurized)

Operating -15 m to 3,048 m -50 ft to 10,000 ft

Nonoperating -15 m to 12,192 m -50 ft to 40,000 ft

62 Chapter 11 Specifications

12 Electrostatic Discharge

Electrostatic discharge is the release of static electricity when two objects come into contact—for example, the shock you receive when you walk across the carpet and touch a metal door knob.

A discharge of static electricity from fingers or other electrostatic conductors may damage electronic components. To prevent damage to the computer, damage to a drive, or loss of information, observe these precautions:

If removal or installation instructions direct you to unplug the computer, first be sure that it is

●

properly grounded, and then remove the cover.

Keep components in their electrostatic-safe containers until you are ready to install them.

●

Avoid touching pins, leads, and circuitry. Handle electronic components as little as possible.

●

Use nonmagnetic tools.

●

Before handling components, discharge static electricity by touching an unpainted metal surface

●

of the component.

If you remove a component, place it in an electrostatic-safe container.

●

Index

Symbols/Numerics

2-finger pinch zoom TouchPad

gesture 32

AC adapter 7 AC adapter, testing 45 action keys

decrease screen brightness

38 Help and Support 38 identifying 12 increase screen brightness 38 next track or section 39 play, pause, resume 39 previous track or section 39 switch screen image 38 volume down 39 volume mute 38 volume up 39 wireless 39

airport security devices 47 antenna, WLAN 8 antivirus software, using 53 audio features, testing 26 audio-out (headphone)/audio-in

(microphone) jack 6, 24

backing up software and

information 54 backups 59 battery

discharging 43

low battery levels 43 battery information, finding 42 battery power 42 BIOS

determining version 56

downloading an update 57

updating 56 Bluetooth device 16, 22 Bluetooth label 15

boot order

changing HP Recovery

Manager 61

bottom 15

caps lock light, identifying 10 caring for your computer 48 cleaning your computer 48 components

display 8 left side 7 right side 6

top 9 connecting to a WLAN 19 connector, power 7 corporate WLAN connection 19 critical battery level 43 critical security updates,

installing 53

deleted files

restoring 60 Disk Cleanup software 47

electrostatic discharge 63 esc key, identifying 12 external AC power, using 44

firewall software 53 fn key, identifying 12, 39 Fun things to do 1

HDMI

configuring audio 28 HDMI port

connecting 27

identifying 6, 23 headphones and microphones,

connecting 25

Hibernation

exiting 41 initiated during critical battery

level 43

initiating 41

high-definition devices,

connecting 27, 28

hot keys

description 39 using 39

HP and third-party software

updates, installing 54

HP Mobile Broadband, disabled

HP PC Hardware Diagnostics

(UEFI)

downloading 58 using 58

HP Recovery Manager

correcting boot problems 61 starting 61

HP Recovery media

creating 59 recovery 61

HP Recovery partition

recovery 61

input power 62 installing

critical security updates 53 optional security cable lock 55

internal display switch,

identifying 8

internal microphones, identifying

8, 23 Internet connection setup 18 Internet security software, using

jacks

audio-out (headphone)/audio-in

(microphone) 6, 24

64 Index

keyboard hot keys, identifying 39 keys

action 12 esc 12 fn 12 Windows 12

labels

Bluetooth 15 Microsoft Certificate of

Authenticity 15 regulatory 15 serial number 14 service 14 wireless certification 15 WLAN 15

LAN, connecting 22 Left TouchPad button,

identifying 9

lights

AC adapter 7 caps lock 10 mute 10 power 6, 10

low battery level 43

maintenance

Disk Cleanup 47

memory card reader, identifying

7, 24 memory card, identifying 7 minimized image

creating 60 minimized image recovery 61 Miracast 28 mouse, external

setting preferences 29 mute light, identifying 10

operating environment 62 original system recovery 60

passwords

Setup Utility (BIOS) 52

Windows 52

ports

HDMI 6, 23, 27 Miracast 28 USB 2.0 6 USB 3.0 6, 24

power

battery 42 Power button, identifiying 11 power connector, identifying 7 power lights, identifying 6, 10 product name and number,

computer 14

public WLAN connection 19

recovery

discs 61

HP Recovery Manager 60

media 61

options 59

starting 61

system 60

USB flash drive 61

using HP Recovery media 59 recovery media

creating 59

creating using HP Recovery

Manager 59

regulatory information

regulatory label 15

wireless certification labels 15 restore

Windows File History 60 Right TouchPad button,

identifying 9

rotating TouchPad gesture 34

scrolling TouchPad gesture 31 security cable lock, installing 55 security cable slot, identifying 7 security, wireless 19 serial number 14 serial number, computer 14 service labels

locating 14 setting password protection on

wakeup 41

setup of WLAN 18

Setup Utility (BIOS) passwords

52 shipping the computer 50 shutdown 46 SIM

inserting 21 SIM card slot 7, 24 Sleep

exiting 41

initiating 41 slots

memory card reader 7, 24

security cable 7 software

Disk Cleanup 47 software updates, installing 53 speakers 13

identifying 24 system recovery 60 system restore point

creating 59

testing an AC adapter 45 testing audio features 26 TouchPad gestures

2-finger pinch zoom 32

rotating 34

scrolling 31 Touchpad zone, identifying 9 traveling with the computer 15,

turning off the computer 46

unresponsive system 46 USB 2.0 port, identifying 6 USB 3.0 port, identifying 6 USB 3.0 ports, identifying 24 using external AC power 44 using passwords 51

video 26

webcam

identifying 8, 23

using 25 webcam light, identifying 8, 23

Index 65

Windows

File History 60 restoring files 60

system restore point 59 Windows key, identifying 12 Windows passwords 52 Wireless Assistant software 16 wireless button 16 wireless certification label 15 wireless controls

button 16

operating system 16

Wireless Assistant software

16 wireless light 16 wireless network (WLAN)

connecting 19 corporate WLAN connection

equipment needed 18 functional range 19 public WLAN connection 19 security 19

using 17 wireless network, securing 54 WLAN antenna, identifying 8 WLAN device 15, 17 WLAN label 15 WWAN antenna, identifying 8 WWAN device 20

66 Index

HP Stream Notebook - 11-d010nr, Stream Notebook - 11-d010wm, Stream Notebook - 11-d011wm, Stream Notebook - 11-d077nr User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual

1 Starting right

Visit the HP Apps Store

Best practices

Fun things to do

More HP resources

2 Getting to know your computer

Finding your hardware and software information

Locating hardware

Locating software

Right side

Left side

Display

Touchpad

Lights

Buttons

Keys

Bottom

Labels

3 Connecting to a network

Connecting to a wireless network

Using the wireless controls

Using the wireless button

Using operating system controls

Sharing data and drives and accessing software

Using a WLAN

Using an Internet service provider

Setting up a WLAN

Configuring a wireless router

Protecting your WLAN

Connecting to a WLAN

Using HP Mobile Broadband (select models only)

Inserting and removing a SIM

Using Bluetooth wireless devices (select models only)

Connecting to a wired network (select models only)

Connecting to a local area network (LAN)

4 Enjoying entertainment features

Multimedia features

Using the webcam

Using audio

Connecting headphones and microphones

Testing your audio features

Using video

Connecting video devices by using an HDMI cable

Setting up HDMI audio

Discovering and connecting to Miracast-compatible wireless displays (select models only)

5 Navigating the screen

Using the TouchPad and gestures

Tapping

Scrolling

2-finger pinch zoom

2-finger click

Rotating (select models only)

Edge swipes

Display and select a charm

Display the Customize icon

Switch between open apps

Using the keyboard and mouse

Using the keys

Using the action keys

Using Windows shortcut keys

Using the hot keys

6 Managing power

Initiating Sleep and Hibernation

Manually initiating and exiting Sleep

Manually initiating and exiting Hibernation (select models only)

Setting password protection on wakeup

Using the power meter and power settings

Running on battery power

Factory-sealed battery

Finding battery information

Conserving battery power

Identifying low battery levels

Resolving a low battery level

Resolving a low battery level when external power is available

Resolving a low battery level when no power source is available

Resolving a low battery level when the computer cannot exit Hibernation