quick
reference
guide
hp StorageWorks
fabric OS commands
version 3.0.x/4.0.x
Product Version: 3.0.x/4.0.x
Hewlett-Packard Company makes no warranty of any kind with regard to
this material, including, but not limited to, the implied warranties of
merchantability and fitness for a particular purpose. Hewlett-Packard shall
not be liable for errors contained herein or for incidental or consequential
damages in connection with the furnishing, performance, or use of this
material.
This document contains proprietary information, which is protected by
copyright. No part of this document may be photocopied, reproduced,
or translated into another language without the prior written consent of
Hewlett-Packard. The information contained in this document is subject to
change without notice.
BROCADE, the Brocade B weave logo, Brocade: the Intelligent Platform
for Networking Storage, SilkWorm, and SilkWorm Express, are
trademarks or registered trademarks of Brocade Communications
Systems, Inc. or its subsidiaries in the United States and/or in other
countries.
Hewlett-Packard Company shall not be liable for technical or editorial
errors or omissions contained herein. The information is provided “as is”
without warranty of any kind and is subject to change without notice. The
warranties for Hewlett-Packard Company products are set forth in the
express limited warranty statements for such products. Nothing herein
should be construed as constituting an additional warranty.
Printed in the U.S.A.
Fabric OS Commands Version 3.0.x/4.0.x
Quick Reference Guide
First Edition (February 2003)
Part Number: AA–RTE6A–TE
agtcfgDefault Reset the SNMP agent configuration
to default values.
agtcfgSet Modify the SNMP agent
configuration.
agtcfgShow Display the SNMP agent
configuration.
aliasDelete Delete a port from all local groups.
aliasJoin Create or add a member to a group
of N_Ports.
aliasPurge Remove an alias group.
aliasShow Display local alias server information.
aliAdd Add a member to a zone alias.
aliCreate Create a zone alias.
aliDelete Delete a zone alias.
aliRemove Remove a member from a zone alias.
aliShow Display zone alias information.
backplanetest Backplane connection test for multiple
blade configured system.
backPort Test for back-end
miniswitch-to-miniswitch links.
backSpace Set an alternate backspace character.
bcastShow Display broadcast routing
information.
bladeBeacon Set blade beaconing mode on or off.
bladeDiag Run diagnostics on a switch blade.
bladeDiagShort Run diagnostics on a switch blade.
bladePropShow Display blade property.
bsn Display the serial number.
camTest Verify QuickLoop's Content
Addressable Memory (CAM) SID
translation.
centralMemoryTest Test ASIC central memory operation.
cfgAdd Add a member to a zone
configuration.
cfgClear Clear all zone configurations.
cfgCreate Create a zone configuration.
cfgDelete Delete a zone configuration.
cfgDisable Disable a zone configuration.
cfgEnable Enable a zone configuration.
cfgRemove Remove a member from a zone
configuration.
cfgSave Save zone configuration to
non-volatile memory.
cfgShow Display zone configuration
information.
cfgTransAbort Abort the current zoning transaction.
chassisName Display or set the chassis name for a
StorageWorks Core switch.
chassisShow Display all Field Replaceable Units
(FRUs).
Legend: V3.0.x unique commands
V4.0.x unique commands
V3.0.x and V4.0.x commands
chippropshow Display ASIC chip property contents.
chipregshow Display port registers of a given chip
number.
cmemRetentionTest Test the data retention of the central
memory SRAMs.
cmiTest Verify the Control Message Interface
(CMI) bus between ASICs.
configDefault Reset a subset of configuration
settings to the default values.
configDownload Load the switch configuration file from
a host system.
configShow Display system configuration settings.
configUpload Create a backup file of switch
configuration information on a host
workstation.
configure Modify system configuration settings.
crossPortTest Functional test of port external
transmit and receive path.
dataTypeShow Displays sample data stream types
used in some diagnostic commands.
date Display or set the switch date and
time.
diagClearError Clear the diag software flag to allow
for retest.
diagCommandShow Displays a list of diagnostic
commands.
diagDisablePost Disable POST execution at reboot.
diagEnablePost Enable POST execution at next
reboot.
diagesdports Set ESD skip ports list.
diagfaillimit Set diagnostics fail limit.
diagHelp Display diagnostic command
information.
diagloopid Set the diagnostics loop ID.
diagmodepr Enable or disable mode messages.
diagpost Enable or disable POST testing.
diagretry Enable or disable retry mode.
diagsetburnin Initializes the blade for a burn-in run.
diagsetcycle Set diagnostic script parameters.
diagshow Display diagnostics status.
diagshowtime Enable or disable elapsed time
messages.
diagsilkworm Enable or disable silkworm mode.
diagskiptests Enable or disable diagnostics skip test
flags.
diagstopburnin Terminate a blade burn-in run.
dlsReset Disable Dynamic Load Sharing (DLS)
option.
dlsSet Enable Dynamic Load Sharing (DLS)
option.
Legend: V3.0.x unique commands
V4.0.x unique commands
V3.0.x and V4.0.x commands
dlsShow Display the setting of the Dynamic
Load Sharing (DLS) option.
errDump Display the error log without page
breaks.
errShow Scroll through the error log.
fabricShow Display fabric membership
information.
fabStatsShow Display the fabric statistics
information.
fanDisable Disable a fan unit.
fanEnable Enable a fan unit.
fanShow Display fan status.
faStatsShow Display statistics about Fabric Assist.
fastboot Reboot the switch, bypassing POST.
fazoneAdd Add a member to a Fabric Assist
zone.
fazoneCreate Create a Fabric Assist zone.
fazoneDelete Delete a Fabric Assist mode zone.
fazoneRemove Remove members from a Fabric Assist
mode zone.
fazoneShow Display fazone information.
filterTest Frame Filter test.
firmwareCommit Commit switch firmware update.
firmwareDownload Download switch firmware from a
remote host or from a local directory.
firmwarerestore Restore old active firmware image.
fspfShow Display FSPF protocol information.
fwAlarmsFilterSet Enable or disable alarms for Fabric
Watch.
fwAlarmsFilterShow Display alarm filtering for Fabric
Watch.
fwClassInit Initialize all classes under Fabric
Watch.
fwConfigReload Reload the Fabric Watch
configuration.
fwConfigure Display and modify the Fabric Watch
configuration and status.
fwFruCfg Display or modify FRU state alert
configuration.
fwHelp Display Fabric Watch command
information.
fwMailCfg Configure e-mail alerts in Fabric
Watch.
fwSetToCustom Set boundary and alarm levels to
custom values.
fwSetToDefault Set boundary and alarm levels to the
default values.
fwShow Display the thresholds monitored by
Fabric Watch.
gbicShow Display serial ID GBIC information.
h Display shell history.
Legend: V3.0.x unique commands
V4.0.x unique commands
V3.0.x and V4.0.x commands
Page 2
haDisable Disable the High Availability feature
in the switch.
haEnable Enable the High Availability feature
in the switch.
haFailover Forces the failover mechanism so that
the Standby CP becomes the Active
CP.
haShow Display control processor (CP) status.
help Display help information for
commands.
historyLastShow Display last history log record.
historyShow Display the history log.
i Display task summary.
ifModeSet Set the link operating mode for a
network interface.
ifModeShow Display the link operating mode for a
network interface.
ifShow Display network interface
information.
interfaceShow Display FSPF interface information.
iodReset Turn off the In-order Delivery (IOD)
option.
iodSet Enable the In-Order Delivery (IOD)
option.
iodShow Display the In-Order Delivery (IOD)
option setting.
ipAddrSet Set the IP Address details for a switch
or Control Processor.
ipAddrShow Display the IP address for a switch or
Control Processor.
licenseAdd Add license key to switch.
licenseHelp Commands used to administer license
keys.
licenseIdShow Display system license ID.
licenseRemove Remove the license key from a switch.
licenseShow Display current license keys.
linkCost Set or print the FSPF cost of a link.
login Login as a new user.
logout Logout from a shell session.
loopdiagClear Clear information from management
layers.
loopdiagDone Completes loopdiag application.
loopdiagRestore Restore the original loop
configuration.
loopdiagStart Start loopdiag application.
loopdiagStop Stops the loopdiag application.
loopPortTest Tests the L-port path on a loop.
LSDbShow Display the FSPF Link State Database.
lutil License administration utility.
mcastShow Display multicast routing information.
Legend: V3.0.x unique commands
V4.0.x unique commands
V3.0.x and V4.0.x commands
memshow Display the amount of free and used
memory in switch.
minispropshow Display the properties of the
mini-switches.
minisregshow Display port registers for a specified
mini-switch.
msCapabilityShow Display the Management Server
Capability.
msConfigure Configure the Management Server.
msPlatShow Display the Management Server
Platform database.
msPlCapabilityShow Display the Platform Database
Management Capability.
msPlClearDB Clear the Management Server
Platform database on all switches in
the fabric.
msPlMgmtActivate Activate the Management Server
Platform service on all switches in the
fabric.
msPlMgmtDeactivate Deactivate the Management Server
Platform service on all switches in the
fabric.
msTdDisable Disable the Management Server
Topology Discovery service.
msTdEnable Enable the Management Server
Topology Discovery service.
msTDReadConfig Display the status of Management
Server Topology Discovery service.
myid Display the current login session
details.
nbrStatsClear Reset FSPF interface counters.
nbrStateShow Display FSPF neighbor's state.
nsAllShow Display global Name Server
information.
nsShow Display local Name Server
information.
parityCheck Enable or disable DRAM parity
checking.
passwd Change system login name and
password.
perfAddEEMonitor Add end-to-end monitor to a port.
perfAddIPMonitor Add a filter-based monitor for IP
frame count.
perfAddReadMonitor Add a filter-based monitor for the
SCSI Read command.
perfAddRWMonitor Add a monitor for the SCSI Read and
Write commands.
perfAddSCSIMonitor Add a monitor for SCSI frame count.
perfAddUserMonitor Add a user-defined filter-based
monitor.
perfAddWriteMonitor Add a filter-based monitor for the
SCSI Write command.
Legend: V3.0.x unique commands
V4.0.x unique commands
V3.0.x and V4.0.x commands
Page 3
perfCfgClear Clear the previously saved
performance monitoring
configuration settings from
non-volatile memory
perfCfgRestore Restore performance monitoring
configuration settings from
non-volatile memory
perfCfgSave Save performance monitoring
configuration settings to non-volatile
memory.
perfClrAlpaCrc Clear an AL_PA device’s CRC count
by the port and AL_PA.
perfDelEEMonitor Delete an end-to-end monitor on
port.
perfDelFilterMonitor Delete a filter-based monitor.
perfHelp Display performance monitoring help
information.
perfSetPortEEMask Set overall mask for end-to-end (EE)
monitors.
perfShowAlpaCrc Display the AL_PA CRC count by port
or by AL_PA.
perfShowEEMonitor Display end-to-end monitor
information and frame traffic on a
port.
perfShowFilterMonitor Display filter-based monitor
information and frame traffic for a
port.
perfShowPortEEMask Display the current end-to-end mask
of a port.
portCfgEport Enable or disable a port from
becoming an E_Port.
portCfgGport Designate a port as a locked G_Port.
portCfgLongDistance Configure a port to support long
distance links.
portCfgLport Lock a port as an L_PORT.
portCfgMcastLoopback Configure a port to receive multicast
frames.
portCfgShow Display port configuration settings.
portCfgSpeed Configure the port speed level.
portCfgTrunkport Configure a port to be enabled or
disabled for trunking.
portDisable Disable a switch port.
portEnable Enable a switch port.
portErrShow Display port error summary.
portLEDTest Exercise the user port LEDs.
portLogClear Clear the port log.
portLogDump Display the port log without page
breaks.
portLogDumpPort Display the port log of specified port,
without page breaks.
portLogShow Display the port log.
portLoopbackTest Functional test of port N->N path.
Legend: V3.0.x unique commands
V4.0.x unique commands
V3.0.x and V4.0.x commands
portPerfShow Display port throughput performance
in bytes, kilobytes, or megabytes.
portRegTest Bit write/read test of the ASIC SRAMs
and registers.
portRouteShow Display routing tables for a port.
portShow Display port status.
portStatsShow Display port hardware statistics.
powerOffListSet Sets slot power off list order.
powerOffListShow Displays slot power off list order.
psShow Display power supply status.
ptdatashow Display port data structure.
ptphantomshow Display port routing tables.
ptpropshow Display port properties.
ptregshow Display ASIC port registers.
ptrouteshow Display port routing properties.
ptstatsshow Display port statistics properties.
qlDisable Disable QuickLoop mode.
qlEnable Enable QuickLoop mode.
qloopAdd Add a member to a QuickLoop.
qloopCreate Create a QuickLoop.
qloopDelete Delete a QuickLoop.
qloopRemove Remove a member from a QuickLoop.
qloopShow Display QuickLoop information.
qlPartner Set a QuickLoop partner or display
information about a partner.
qlPortDisable Disable a QuickLoop port.
qlPortEnable Enable a QuickLoop port.
qlPortShowAll Display QuickLoop port information.
qlShow Display QuickLoop information.
qlStatsShow Display QuickLoop statistics.
quietMode Toggle the shell quiet mode on and
off.
ramTest Bit write and read test of SDRAMs in
the switch.
reboot Reboot the switch.
routeHelp Display routing help commands.
savecore Save or remove core files created by
daemons.
sensorShow Display sensor readings.
setesdmode Enable or disable ESD mode.
setgbicmode Enable or disable GBIC mode.
setmfgmode Enable or disable Mfg mode.
setsfpmode Enable or disable SFP mode.
setSlot Set the default slot number for
diagnostic commands.
setSplbMode Enable or disable two port loopback.
Legend: V3.0.x unique commands
V4.0.x unique commands
V3.0.x and V4.0.x commands
Page 4
sfpShow Display serial ID SFP information.
slotOff Disable a blade slot.
slotOn Enable a blade slot.
slotpoweroff Power off a blade unit.
slotpoweron Power on a blade unit.
slotShow Display slot status.
snmpMibCapSet View and modify options for
configuring SNMP MIB trap
capability.
spinFab Test for Cascaded switch ISL links.
spinSilk Functional test of internal and
external transmit and receive paths at
full speed.
sramRetentionTest Data retention test of the
miscellaneous SRAMs in ASIC.
statsTest Run a statistics counter diagnostic test.
supportShow Print switch information for
debugging purposes.
switchBeacon Set switch beaconing mode on or off.
switchCfgSpeed Configure all ports of the switch to a
particular speed level.
switchCfgTrunk Enable or disable trunking on all the
ports of a switch.
switchDisable Disable the switch.
switchEnable Enable the switch.
switchName Display or set switch name.
switchReboot Halt and bring down the operational
switch.
switchShow Display switch and port status.
switchShutdown Halt the operational switch.
switchStart Initialize the switch to operational.
switchStatusPolicySet Set the policy parameters that
determine the overall switch status.
switchStatusPolicyShow Display the policy parameters that
determine the overall switch status.
switchStatusShow Display the overall status of the
switch.
switchuptime Display the amount of time the switch
has been operating.
syslogdIpAdd Add the IP address of a syslog
daemon.
syslogdIpRemove Remove the IP address of a syslog
daemon.
syslogdIpShow Display all syslog daemon IP
addresses.
systemtest Run diagnostics on a switch blade.
tempShow Display temperature readings.
topologyShow Display the unicast fabric topology.
trackChangesSet Enable configuring of track-changes
feature.
Legend: V3.0.x unique commands
V4.0.x unique commands
V3.0.x and V4.0.x commands
trackChangesShow Display status of track-changes
feature.
trunkDebug Debug a trunk link failure.
trunkShow Display trunking information.
turboRamTest Turbo SRAM logic test for 2-Gb
ASICs.
uptime Display length of time the system has
been operational.
uRouteConfig Configure a static route.
uRouteRemove Remove a static route.
uRouteShow Display unicast routing information.
version Display firmware version information.
wwn View a switch WWN.
zoneAdd Add a member to the zone.
zoneCreate Create a zone.
zoneDelete Delete a zone.
zoneHelp Display help information on zone
commands.
zoneRemove Remove a member from a zone.
zoneShow Display zone information.
Legend: V3.0.x unique commands
V4.0.x unique commands
V3.0.x and V4.0.x commands
Page 5
Loading...