The information combined herein is subject to change without notice. The only warranties for HP products and services are set forth in the express
warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall
not be liable for technical or editorial errors or omissions contained herein.
Microsoft, Windows, Windows NT, and Windows XP are U.S. registered trademarks of Microsoft Corporation.
UNIX® is a registered trademark of The Open Group.
WARRANTY STATEMENT: To obtain a copy of the warranty for this product, see the warranty information website:
HP StorageWorks 2312fc and 2324fc Modular Smart Array user guide5
6
Figures
1 Cabling connections between a single-controller enclosure and one MSA2000 3.5 12-drive enclosure 22
2 Cabling connections between a dual-controller enclosure and one MSA2000 3.5 12-drive enclosure . 23
3
Cabling connections between a dual-controller enclosure and up to three MSA2000 3.5 12-drive enclosures
HP StorageWorks 2312fc and 2324fc Modular Smart Array user guide9
10
About this guide
This guide provides information about the HP StorageWorks 2312fc Modular Smart Array and 2324fc
Modular Smart Array.
Intended audience
This guide is intended for use by system administrators and technicians who are experienced with the
following:
• Direct attach storage (DAS) or storage area network (SAN) management
• Network administration
• Network installation
• Storage system installation and configuration
Prerequisites
Prerequisites for installing and configuring this product include familiarity with:
• Servers and computer networks
• Fibre Channel and Ethernet protocols
Related documentation
In addition to this guide, please refer to other documents for this product:
• HP StorageWorks MSA2000 Family SMU online help
• HP StorageWorks MSA2000 Family CLI online help
• HP StorageWorks MSA2000 Family CLI reference guide
These and other HP documents can be found on the HP documents web site:
Document conventions and symbols
Table 1 Document conventions
ConventionElement
Medium blue text: Figure 1Cross-reference links and e-mail addresses
Medium blue, underlined text
(http://www.hp.com
Bold font• Key names
Italics fontText emphasis
Monospace font• File and directory names
Monospace, italic font
)
Web site addresses
• Text typed into a GUI element, such as into a box
• GUI elements that are clicked or selected, such as menu and list
• System output
• Code
• Text typed at the command-line
• Code variables
http://www.hp.com/support/.
items, buttons, and check boxes
Monospace, bold fontEmphasis of file and directory names, system output, code, and text
• Command-line variables
typed at the command line
HP StorageWorks 2312fc and 2324fc Modular Smart Array user guide11
WARNING!Indicates that failure to follow directions could result in bodily harm or death.
CAUTION: Indicates that failure to follow directions could result in damage to equipment or data.
IMPORTANT: Provides clarifying information or specific instructions.
NOTE: Provides additional information.
TIP:Provides helpful hints and shortcuts.
Rack stability
WARNING!To reduce the risk of personal injury or damage to equipment:
• Extend leveling jacks to the floor.
• Ensure that the full weight of the rack rests on the leveling jacks.
• Install stabilizing feet on the rack.
• In multiple-rack installations, secure racks together.
• Extend only one rack component at a time. Racks may become unstable if more than one component is
extended.
HP technical support
Telephone numbers for worldwide technical support are listed on the HP support web site:
http://www.hp.com/support/
Collect the following information before calling:
• Technical support registration number (if applicable)
• Product serial numbers
• Product model names and numbers
• Applicable error messages
• Operating system type and revision level
• Detailed, specific questions
For continuous quality improvement, calls may be recorded or monitored.
Customer self repair
HP customer self repair (CSR) programs allow you to repair your StorageWorks product. If a CSR part
needs replacing, HP ships the part directly to you so that you can install it at your convenience. Some parts
do not qualify for CSR. Your HP-authorized service provider will determine whether a repair can be
accomplished by CSR.
For more information about CSR, contact your local service provider. For North America, see the CSR
website:
http://www.hp.com/go/selfrepair
.
12
Product warranties
For information about HP StorageWorks product warranties, see the warranty information website:
http://www.hp.com/go/storagewarranty
Subscription service
HP strongly recommends that customers sign up online using the Subscriber's choice web site:
http://www.hp.com/go/e-updates
• Subscribing to this service provides you with e-mail updates on the latest product enhancements, newest
versions of drivers, and firmware documentation updates as well as instant access to numerous other
product resources.
• After signing up, you can quickly locate your products by selecting Business support and then Storage
under Product Category.
HP web sites
For other product information, see the following HP web sites:
.
• http://www.hp.com
• http://www.hp.com/go/storage
• http://www.hp.com/support/
• http://www.docs.hp.com
Documentation feedback
HP welcomes your feedback.
To make comments and suggestions about product documentation, please send a message to
storagedocs.feedback@hp.com. All submissions become the property of HP.
HP StorageWorks 2312fc and 2324fc Modular Smart Array user guide13
14
1Overview
The 2312fc Modular Smart Array and 2324fc Modular Smart Array are high-performance storage solutions
that combine outstanding performance with high reliability, availability, flexibility, and manageability.
Features and benefits
Product features and supported options include:
• Supported servers
• HP ProLiant servers
• HP ProLiant C-Class Blade servers
•HP Integrity servers
•Certain PA-RISC servers
• Supports most multi-vendor industry standard 32-bit and 64-bit Intel and AMD-based (X86) servers
• Primary supported operating systems
•Microsoft Windows Server
•VMware
•Red Hat Enterprise Linux
•SuSE Linux
•HP-UX
NOTE: Check the QuickSpecs for a complete list of servers. QuickSpecs can be found from your HP MSA
products page at
The link for QuickSpecs will be on the right.
• Capacity up to 99 small form factor (SFF) drives with MSA2324fc and three MSA70 enclosures
• Capacity up to 60 LFF drives with MSA2312fc and four MSA2000 3.5 12-drive enclosures
• Capacity up to 60 drives in a mixed drive environment: one MSA2324fc (24 SFF) and three MSA2000
3.5 12-drive enclosures (36 LFF)
• Supported drives:
• MSA2 3.5-inch LFF drives:
• 450GB/300GB/146GB 15K RPM DP SAS
• 1TB/750GB/500GB 7.2K RPM DP SATA
• HP ProLiant 2.5-inch SFF drives:
•72GB/36GB 15K RPM SP SAS
•72GB/36GB 15K RPM DP SAS
•146GB/72GB 10K RPM SP SAS
•146GB/72GB 10K RPM DP SAS
• 120GB/60GB 5.4K RPM SATA
•250GB 5.4K RPM SATA
•Two 4-Gb FC ports per controller
• 1-GB cache module per controller
• Battery-free cache backup (with super-capacitor and CompactFlash card)
http://www.hp.com/go/msa. Select MSA SAN Arrays, and then select your product.
NOTE: Check the QuickSpecs for an updated list of supported operating systems and drives. QuickSpecs
can be found from your HP MSA products page at
Arrays, and then select your product. The link for QuickSpecs will be on the right.
http://www.hp.com/go/msa. Select MSA SAN
HP StorageWorks 2312fc and 2324fc Modular Smart Array user guide15
16Overview
2Components
1
32
4
5
6
23
1
4
5
6
Front panel components
MSA2312fc
1 Enclosure ID LED
2 Hard drive Fault/UID LED
3 Hard drive Online/Activity LED
MSA2324fc
1 Enclosure ID LED
2 Hard drive Online/Activity LED
3 Hard drive Fault/UID LED
4 Unit Identification (UID) LED
5 Fault ID LED
6 Heartbeat LED
4 Unit Identification (UID) LED
5 Fault ID LED
6 Heartbeat LED
HP StorageWorks 2312fc and 2324fc Modular Smart Array user guide17
Hard drive bay numbers
1234567
1
9
2
8
-
MSA2312fc
MSA2324fc
Rear panel components
MSA2312fc and MSA2324fc
1 Power supplies — AC
2 Power switches — AC
3 Host ports
4 CLI port
5 Ethernet port
6 Service port (used by service personnel only)
7 Expansion port
8 Optional FC controller
9 DC Power supply (2) — (DC model only)
10 Power switch es — D C
18Components
MSA2000 3.5 12-drive enclosure
13 4512
2
6
CompactFlash
1 Power supplies
2 Power switches
3 SAS In port (connects to a controller enclosure)
NOTE: The MSA2324fc can also be attached to an MSA70 that is running firmware version 2.18 or later.
For information about the MSA70, see the HP StorageWorks 70 Modular Smart Array Enclosure user guide
located on the MSA2000 Software Support/Documentation CD shipped with your product or at
http://hp.com/support/manuals
.
Cache
To enable faster data access from disk storage, the following two types of caching are performed:
• Posted-write caching. The controller writes user data in the cache memory on the module rather than
directly to the drives. Later, when the storage system is idle, the controller writes the data to the drive
array.
• Read-ahead caching. The controller detects sequential array access, reads ahead into the next
sequence of data, and stores the data in the read-ahead cache. Then, if the next read access is for
cached data, the controller immediately loads the data into the system memory, avoiding the latency of
a disk access.
Transportable CompactFlash
During a power loss or array controller failure, data stored in cache is saved off to non-volatile memory
(CompactFlash). This data is then written to disk after the issue is corrected. To protect against writing
incomplete data to disk, the image stored on the CompactFlash is verified before committing to disk.
4 Service port (used by service personnel only)
5 SAS Out port (connects to another drive enclosure)
6 Optional I/O module
In single-controller configurations, if the controller has failed or does not start, and the Cache Status LED is
on or blinking, the CompactFlash will need to be transported to a replacement controller to recover data
not flushed to disk. (See Controller failure in a single-controller configuration for more information.)
HP StorageWorks 2312fc and 2324fc Modular Smart Array user guide19
CAUTION: To preserve the existing data stored in the CompactFlash, you must transport the
CompactfFash from the failed controller to the replacement controller using a procedure outlined in the HP
StorageWorks 2312fc/2324fc controller replacement instructions, shipped with the replacement controller.
Failure to use this procedure will result in the loss of data stored in the cache module. The CompactFlash
must stay with the same enclosure. If the CompactFlash is used/installed in a different enclosure, data
loss/data corruption will occur.
IMPORTANT: In dual controller configurations, there is no need to transport a failed controller’s cache to
a replacement controller because the cache is duplicated between the controllers.
Super-capacitor pack
To protect RAID controller cache in case of power failure, the MSA2312fc and MSA2324fc are equipped
with super-capacitor technology. The super-capacitor pack and CompactFlash memory in each controller
module provide unlimited cache memory backup time. The super-capacitor pack provides energy for
backing up unwritten data in the write cache to the CompactFlash in the event of a power failure. Unwritten
data in CompactFlash memory is automatically committed to disk media when power is restored. While
the cache is being maintained by the super-capacitor, the Cache Status LED flashes at a rate of 1/10
second on and 9/10 second off.
20Components
3Installing the enclosures
Installation checklist
The following table outlines the steps required to install the enclosures and initially configure the system. To
ensure a successful installation, perform the tasks in the order they are presented.
Table 2 Installation checklist
Step
1.
2.Connect enclosures and drive enclosures. See Connecting controller and
3.Connect power cords.See the installation poster.
Install the controller enclosure and optional
drive enclosures in the rack, and attach ear
caps.
port IP properties on the controller
enclosure.
See the racking instructions
poster.
MSA2000 3.5 12-drive
enclosures.
connections.
See Obtaining IP values.
data hosts.
management hosts.
• Verify that controllers and enclosures
have the latest firmware.
• Set the date and time on the controller
enclosure.
• Initially configure and provision the
system.
• Test the configuration.See Testing the configuration.
NOTE: For help with installing your MSA2000 product, also see the MSA2000 Software
Support/Documentation CD shipped with your product.
See Updating firmware.
See Changing the system date
and time.
See Using the Configuration
Wizard and Using the
Provisioning Wizard.
HP StorageWorks 2312fc and 2324fc Modular Smart Array user guide21
Connecting controller and MSA2000 3.5 12-drive enclosures
In
Out
1B
1A
2A
2B
You can connect up to four MSA2000 3.5 12-drive enclosures to an MSA2312fc and up to three
MSA2000 3.5 12-drive enclosures to an MSA2324fc. The cabling diagrams shown in this section show the
recommended fault-tolerant cabling patterns.
IMPORTANT: Connecting an MSA2000 3.5 12-drive enclosure to an MSA2312fc or MSA2324fc requires
mini SAS to SAS cables.
IMPORTANT: Adding a fourth drive enclosure to an MSA2312fc may require a separate, longer cable.
Check the QuickSpecs for an updated list of supported cables. QuickSpecs can be found from your HP
MSA products page at
product. The link for QuickSpecs will be on the right.
IMPORTANT: The MSA2324fc can also be attached to an MSA70 that is running firmware version 2.18 or
later. For information about the MSA70, see the HP StorageWorks 70 Modular Smart Array Enclosure user
guide located on the MSA2000 Software Support/Documentation CD shipped with your product or at
http://hp.com/support/manuals
When connecting multiple drive enclosures, use reverse cabling to ensure the highest level of fault
tolerance. Controllers and I/O (expansion) modules are identified by
<enclosure-ID><controller-ID>. For example, Figure 3 shows controller 1A connected to I/O
module 2A, and the chain of connections continuing down. Controller 1B is connected to the lower
module (B) of the last drive enclosure in the chain, with connections moving in the opposite direction.
http://www.hp.com/go/msa. Select MSA SAN Arrays, and then select your
.
NOTE: For clarity, the schematic illustrations of the controllers shown in this section show only relevant
details such as expansion ports. For detailed illustrations showing all components, see Rear panel
components.
Figure 1 Cabling connections between a single-controller enclosure and one MSA2000 3.5 12-drive
enclosure
22Installing the enclosures
Figure 2 Cabling connections between a dual-controller enclosure and one MSA2000 3.5 12-drive
In
Out
In
Out
1B
1A
2A
2B
In
Out
In
Out
1B
1A
In
Out
In
Out
In
Out
InOut
2B
2A
3B
3A
4B
4A
enclosure
Figure 3 Cabling connections between a dual-controller enclosure and up to three MSA2000 3.5 12-drive
enclosures
HP StorageWorks 2312fc and 2324fc Modular Smart Array user guide23
Loading...
+ 53 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.