Eight sockets for PC2-5300 Fully Buffered DIMMs
(DDR2-667)
2.
Hot-plug fans, full redundancy
3.
Systems Insight Display
4.
Quick release lever for rapid server access
5.
Support for eight Small Form Factor hot plug hard
drives bays
6.
Front LEDs (show server status) and Unit Identification
button/LED (for easy in rack server identification)
7.
Two front USB ports (2 rear USB ports, 1 internal USB
port)
8.
Intel Xeon Processor (Performance models include two
processors)
9.
Hot plug power supply, redundancy option (High
performance models include redundant power supply)
10.
Three full-size PCI-E expansion slots in standard
expansion cage (or optional mixed PCI-X/E expansion
cage). Two additional low-profile PCI-E slots embedded
on the system board. Four slots available for use; one
consumed by Smart Array controller (Base and
Performance models)
11.
Quick removal access panel
Rear View:
1.
Torx service tool
2.
Optional pass through cable door
3.
Two Embedded NC373i Multifunction Gigabit Server
Adapters with TCP/IP Offload Engine
4.
Hot plug power supply bays, redundancy option (High
performance models include redundant power supply)
5.
Integrated Lights-Out 2 (iLO 2) Remote management
port
6.
Video Port
7.
Two USB 2.0 Ports
8.
Serial Port
9.
Keyboard Port
10.
Mouse PS/2 Port
11.
Two low-profile PCI Express x8 slots. Slot 1 is
consumed by the P400 Smart Array controller. (Base
and Performance models)
12.
Three full-size PCI Express slots in standard cage (or
optional mixed PCI-X/E expansion cage)
What's New
New Intel® Xeon® Dual-core 5200 series processors
DA - 12477 Worldwide QuickSpecs — Version 36 — 2/29/2008
Page 1
At A Glance
The HP ProLiant DL380, the world's best selling server, delivers on its history of design excellence with enterprise-class
uptime and manageability, proven 2-way Intel® Xeon® performance, and 2U density for a variety of rack deployments and
applications.
Processors:
Quad-Core and Dual-Core Intel® Xeon® processors for blazing performance; systems support up to 2
processors (2 processors standard on all Performance models)
Preconfigured Performance models save valuable deployment time at a discounted bundle price
Intel® 5000P chipset
Memory:
Up to 32 GB PC2-5300 Fully Buffered DIMMs (DDR2-667) with 4:1 and 2:1 interleaving available, online spare
and mirrored memory capabilities
Storage Controller:
Performance Models: HP Smart Array P400/512MB BBWC Controller (RAID 0/1/1+0/5/6)
Base Models: HP Smart Array P400/256MB Controller (RAID 0/1/1+0/5)
Entry Models: HP Smart Array E200/64MB Controller (RAID 0/1/1+0)
Internal Drive Support:
(8) small form factor (SFF) hot-plug drive bays to support Serial-attached SCSI (SAS) and Serial ATA (SATA)
drives
Slimline media bay supporting Optical or Floppy drive
Network Controller:
Two embedded NC373i Multifunction Gigabit Network Adapters with TCP/IP Offload Engine, including support
for Accelerated iSCSI through an optional Licensing Kit
Expansion Slots:
Four available PCI-Express slots, optional mixed PCI-X / PCI-Express configurations available (see "Standard
Features -Expansion Slots" section below for more details)
USB Ports:
USB 2.0 support
5 total ports: (2) ports up front; (2) ports in back; (1) port internal
Redundancy:
Fully redundant hot plug fans (N+1)
Hot plug power supply with optional redundancy (Included in Performance models)
Management:
HP Insight Control Environment server management software
Integrated Lights-Out 2 featuring Integrated Remote Console with KVM over IP performance over shared
network access
HP Power Meter and Power Regulator for ProLiant, delivering integrated power monitoring and server level,
policy based power management with industry leading energy efficiency and savings on system power and
cooling costs.
Automatic Server Recovery (ASR), ROM Based Setup Utility (RBSU), HP System Insight Manager, Status LEDs
including system health and UID and SmartStart
System Insight Display on the front bezel for quick and easy server diagnostics
Form Factor:
Rack (2U), (3.5-inch); Depth 26 inches (66 cm)
Deployment/Serviceability:
Quick Deploy Rail System includes sliding universal rails, an ambidextrous cable management arm and quick
release levers for fast and easy serviceability
Tool-less access to all system components for easy in rack serviceability
Warranty:
This product is covered by a global limited warranty and supported by HP Services and a worldwide network of
HP Authorized Channel Partners resellers. Hardware diagnostic support and repair is available for three years
from date of purchase. Support for software and initial setup is available for 90 days from date of purchase.
Enhancements to warranty services are available through HP Care Pack services or customized service
agreements. SATA hard drives have a one-year warranty.
NOTE:
response. Additional information regarding worldwide limited warranty and technical support is available at:
Mixing different processor models is not supported.
Up to 2 processors supported. Performance configurations include two processors.
.
Cache Memory
One of the following
depending on Model
Chipset
Upgradeability
Memory Protection
12MB (2 x 6MB) Level 2 cache (5400 series)
8MB (2 x 4MB) Level 2 cache (5300 series)
6MB (2 x 3MB) Level 2 cache (5200 series)
4MB (1 x 4MB) Level 2 cache (5100 series)
4MB (2 x 2MB) Level 2 cache (5000 series)
Intel® 5000P Chipset
NOTE:
For more information regarding Intel chipsets, please see the following URL:
http://www.intel.com/products/server/chipsets/
Upgradeable to 2 processors (8 cores)
Future upgradeable to Xeon® Series 5400/5300 Quad-Core processors (Please contact your
regional sales support to determine quad core upgradeability. Some of the earlier shipping
models may not support this upgrade). 5100 Dual-Core models are not upgradeable to the 5200
Dual-Core processors.
DA - 12477 Worldwide QuickSpecs — Version 36 — 2/29/2008
Page 3
Memory
Type
Standard
(Entry Models)
Standard
(Base Models)
Standard
(Performance Models)
Maximum
NOTE:
Memory DIMMs in systems with the Front Side Bus (FSB) running at 1333 MHz will run at
667 MHz and in systems with a FSB running at 1066 MHz or 667 MHz the memory DIMMs will
run at 533 MHz.
PC2-5300 Fully Buffered DIMMs (DDR2-667) with 4:1 and 2:1
interleaving available (interleaving requires identical DIMMs)
1 GB (2 x 512 MB)
2 GB (2 x 1 GB)
4 GB (4 x 1 GB)
32 GB (8 x 4 GB)
Network Controller
Expansion Slots
Embedded Slots
PCIe Riser
(Standard)
PCIe/PCI-X Riser
(Optional)
Two embedded NC373i Multifunction Gigabit Network Adapters with TCP/IP Offload Engine,
including support for Accelerated iSCSI through an optional Licensing Kit
Slot
Number
1
2
NOTE:
Embedded slots support half-height low profile cards. For Base and Performance
models, the integrated Smart Array P400 (SAS Controller) is installed in Slot 1.
Slot
Number
3
4
5
NOTE:
E200 Controller with 64MB Cache (SAS Controller) is installed in Slot 3.
NOTE:
internal storage controller.
* x4 slots support x8 cards, but will run at x4 speeds. x8 slots support x16 cards, but will run at x8
speeds.
** Default bus assignment. Inserting cards with PCI bridges may alter the actual bus assignment
number.
*** Slots are enumerated differently based on OS. MS OS's enumerate from lowest to highest
Device ID by bus (starting with the lowest bus).
Riser slots support full-size PCIe/PCI-X cards. For Entry model, the standard Smart Array
Slot
Number
3
4
5
Server has 5 total slots with 4 slots are available for use; one slot populated by the
Bus Speed*Bus Number
x4 PCIe (x8
connector)
x4 PCIe
(x8 connector)
Bus Speed*Bus Number
x4 PCIe
(x8 connector)
x8 PCIe
(x16 connector)
x8 PCIe
(x16 connector)
Bus Speed*Bus Number
x8 PCIe
(x16 connector)
64-bit/133MHz
PCI-X
64-bit/133MHz
PCI-X
60no
110no
140no
230no
190no
230no
181no
182no
**
**
**
Device
Number
Device
Number
Device
Number
***
***
***
Hot Plug
Hot Plug
Hot Plug
PCI Voltage
N/A
N/A
PCI Voltage
N/A
N/A
N/A
PCI Voltage
N/A
3.3 Volt
3.3 Volt
DA - 12477 Worldwide QuickSpecs — Version 36 — 2/29/2008
Page 4
Storage Controller
One of the following
depending on Model
Performance Models:
Base Models:
Entry Models:
HP Smart Array P400/512MB BBWC Controller (RAID 0/1/1+0/5/6)
HP Smart Array P400/256MB Controller (RAID 0/1/1+0/5)
Available upgrades
standalone battery for RAID 0/1/1+0/5/6
HP Smart Array E200/64MB Controller (RAID 0/1/1+0)
Available upgrades
RAID 0/1/1+0/5
: 512MB battery-backed write cache (BBWC) or
: 128MB battery-backed write cache (BBWC) for
Storage
Maximum Internal
Storage
Remote Management
Diskette Drive
Optical Drive
One of the following
depending on Model
Hard Drives
Hot Plug SAS
Integrated Lights Out 2 (iLO2) Standard Management:
Virtual Text Remote Console (pre-OS only)
Remote Serial Console
Virtual Power Button Control
Virtual Unit ID control
Integrated Remote Console
Dedicated & full function shared network connectivity
Embedded system health
Browser, command line and scripted access
Automatic IP Configuration via DHCP/DNS/WINS
Industry Standard 128-bit Secure Sockets Layer (SSL) and Secure Shell security (SSH)
OS independent hardware health status
IML and iLO Event Logging
Support for 12 user accounts with customizable access privilege
None Standard
None Standard
IDE DVD-ROM/CDRW Combo included on Performance models
None Standard
1.168TB
8 x 146GB with standard internal hot plug
SFF SAS drive cage
Intelligent
Manageability
HP Systems Insight Manager
SmartStart
Management Agent
Redundant ROM
Remote Flash ROM
ROM-Based Setup Utility (RBSU)
Integrated Management Log
Automatic Server Recovery (ASR)
Dynamic Sector Repairing (with Smart Array controller)
Drive Parameter Tracking (with Smart Array controller)
Hot Spare Boot
NOTE:
Upon the event of a failed processor in a multi-processing environment, the system will
automatically reboot and attempt to use the remaining good processor.
Pre-Failure Warranty (covers processors, SAS hard drives and memory)
DA - 12477 Worldwide QuickSpecs — Version 36 — 2/29/2008
HP Insight Control Environment delivers foundation management, including remote monitoring,
hardware resource deployment, health monitoring, software version control, performance
monitoring, vulnerability scanning and patch management, and power management.
HP Insight Control Environment installs and licenses the following components by default using a
wizard-based integrated installer:
HP Systems Insight Manager
HP iLO Advanced Pack
HP Rapid Deployment Pack
HP Insight Power Manager
HP Performance Management Pack
HP Vulnerability and Patch Management Pack
Additional ProLiant Essentials software and management tools included on the Insight Control
Management kit can be installed manually:
HP Server Migration Pack - Universal Edition
HP Open Service Event Manager
HP Instant Support Enterprise Edition
NOTE:
included in the Insight Control Management media kit.
NOTE:
visit:
HP Insight Control management suites and most HP ProLiant Essentials include a one year of 24
x 7 HP Software Technical Support and Update Service ensuring rapid access to HP support staff
and proactive delivery of software updates. For more information about this service, please visit:
http://www.hp.com/services/insight
Server Migration Pack - Universal Edition can be installed from the SMP Universal CD
For additional product and licensing information about HP Insight Control Environment,
http://www.hp.com/go/ice
.
.
DA - 12477 Worldwide QuickSpecs — Version 36 — 2/29/2008
Page 6
Server Management
Stand Alone Software
Product - ProLiant
Essentials
HP Systems Insight
Manager
ProLiant Essentials
Rapid Deployment Pack
ProLiant Essentials
Server Migration Pack Universal Edition
HP Systems Insight Manager (HP SIM) provides a unified, secure and
extensible standards-based environment to centrally manage servers,
storage and other infrastructure devices, (both HP and non-HP) across
multiple operating system platforms.
Rapid Deployment Pack (RDP) extends HP Systems Insight Manager
with a complete deployment solution for HP ProLiant servers. RDP
provides a central location to configure server hardware, deploy
Windows, Linux and VMware ESX operating environments and install
HP ProLiant Support Pack drivers using images and scripted profiles.
For more information, visit:
Upgrading, replacing, or virtualizing your existing server? Effortlessly
transition to new virtual or physical HP ProLiant servers or BladeSystem
with automated, accurate and affordable migration of OS, application
and data. SMP Universal automates the manual processes required for
migrating servers between physical or virtual platforms, whether
migrating to VMware or Microsoft virtual machines. SMP Universal
allows all of the following migrations:
physical to ProLiant
physical to virtual
virtual to virtual
virtual to ProLiant
http://www.hp.com/go/rdp
.
NOTE:
ProLiant Essentials
Performance
Management Pack
Integrated Lights-Out
Advanced Pack
Integrated Lights-Out
Select Pack
iLO Power Management
Pack
ProLiant Essentials
Accelerated iSCSI Pack
HP Insight Power
Manager (IPM)
NOTE:
Packs. Refer to:
Value Pack product QuickSpecs for more information.
Flexible and volume quantity license kits are available for ProLiant Essentials Value
http://www.hp.com/servers/proliantessentials
Performance Management Pack (offered exclusively through the
Insight Control suites) - a performance management solution that
identifies and explains hardware performance bottlenecks on ProLiant
servers and attached options enabling users to better utilize their
valuable resources.
Upgrades the iLO 2 processor with comprehensive remote control
including Virtual KVM remote graphical console, enhanced console
sharing and replay, virtual media (floppy, CD/DVD, USB key), virtual
folders, and enterprise security (directory services and two-factor
authentication).
Upgrades the iLO 2 processor with enhanced console sharing and
replay, virtual media (floppy, CD/DVD, USB key), virtual folders,
historical power reporting, power capping and enterprise security
(directory services and two-factor authentication) for servers managed
using remote consoles available in iLO 2 Standard and iLO 2 Standard
Blade Edition.
Energy-efficient management software that delivers centralized control,
reliable security, and energy savings for your BladeSystem
infrastructure. iPMP combines the total control of iLO 2 Advanced in the
area of remote management with the energy monitoring and control of
the Insight Power Manager to deliver a robust solution capable of full
remote control and power management of ProLiant servers through a
unified interface within HP Systems Insight Manager.
Enables the embedded Multifunction network controller to serve as
both a NIC and an iSCSI HBA providing access to SAN storage over
the same connection used for networking. Processing of the protocol
stack is offloaded to the NIC reducing CPU utilization and greatly
improving the speed with which the requests are processed and sent to
the network.
Upgrades the single-server remote management capabilities of iLO
Select/Advanced to include centralized reporting and policy-based
management of power consumption and thermal output provided by
the Insight Power Manager. IPM unifies all of this functionality within a
single user interface - HP Systems Insight Manager.
For more information, visit:
http://www.hp.com/go/migrate
or the various ProLiant Essentials
.
DA - 12477 Worldwide QuickSpecs — Version 36 — 2/29/2008
Page 7
Core Infrastructure
Management
SmartStart
Insight Management
Agents
Subscriber's Choice
ProLiant Support Packs
and ROMPaq, software
SmartStart is a tool that simplifies server setup, providing a rapid way to
deploy reliable and consistent server configurations. For more
information, please visit the SmartStart Web site at:
http://www.hp.com/servers/smartstart
SmartStart version supported (minimum): SmartStart 7.51
The Insight Management Agents should be installed on all HP servers
to present system instrumentation, health and configuration information
into HP Systems Insight Manager and the HP System Management
Homepage. The HP System Management Homepage aggregates
systems data from Insight Management Agents and other HP
management tools, providing a consolidated browser-based interface
for managing individual servers.
Insight Management Agents and The HP System Management
Homepage are included on ProLiant Support Packs, and can also be
installed using the server profiles provided with the ProLiant Essentials
Rapid Deployment Pack
For additional information about the Management Agents and the HP
System Management Homepage please visit the management Web
site at:
Subscriber's Choice Driver and Support Alerts/Notifications is a webbased email subscription service that provides software and driver
change notifications for ProLiant products. Sign up at:
http://www.hp.com/go/subscriberschoice
and customize your profile to receive various new alerts as they
become available, on a weekly or monthly basis.
The latest software, drivers, and firmware fully optimized and tested for
your ProLiant server and options, available through ProLiant Support
Packs the ProLiant Essentials Rapid Deployment Pack, SmartStart or
downloaded from software and drivers download pages website at:
http://www.hp.com/go/support
http://www.hp.com/servers/manage
.
.
.
Industry Standard
Compliance
Security
Server Power Cords
UPS and PDU Power
Cord Matrix
ACPI 2.0 Compliant
PCI 2.2 Compliant
WOL Support
Microsoft® Logo certifications
USB 2.0 Support
Power-on password
Keyboard password
Diskette drive control
Diskette boot control
QuickLock, Network Server Mode
Parallel and serial interface control
Administrator's password
An IEC13 to IEC14 jumper cord ships standard with all part numbers if connecting to a UPS or
PDU. If a localized cable is desired or required for each geographic specific model, it needs to be
purchased, including the US.
Please see the UPS and PDU cable matrix that lists cable descriptions, requirements, and
specifications for UPS and PDU units:
800Watt, CE Mark Compliant
Optional Hot Plug AC Redundant Power Supply
DA - 12477 Worldwide QuickSpecs — Version 36 — 2/29/2008
Page 8
System Fans
Fully redundant hot plug fans ship standard (N+1).
OS Support
Microsoft Windows Server 2000
Microsoft Windows Server 2003
Microsoft Windows Small Business Server 2003, R2
Microsoft Windows Server 2008
Novell NetWare
Red Hat Enterprise Linux
SUSE Linux Enterprise Server
SCO UnixWare, OpenServer
VMware Virtualization Software
Solaris 10 32/64-bit
For more Linux OS support & certification information, please visit our the ProLiant &
For more information on HP's Certified and Supported ProLiant Servers, please visit the
.
.
.
Rack Airflow
Requirements
Rack Kit
Rack 10000 series Cabinets
The increasing power of new high-performance processor technology requires increased cooling
efficiency for rack-mounted servers. The 10000 Series Racks provide enhanced airflow for
maximum cooling, allowing these racks to be fully loaded with servers using the latest
processors.
CAUTION: If a third-party rack is used, observe the following additional requirements to ensure
adequate airflow and to prevent damage to the equipment:
Front and rear doors: If your 42U server rack includes closing front and rear doors, you
must allow 830 square inches (5,350 sq cm) of hole evenly distributed from top to bottom
to permit adequate airflow (equivalent to the required 64 percent open area for ventilation).
Side: The clearance between the installed rack component and the side panels of the rack
must be a minimum of 2.75 inches (7 cm).
CAUTION:
rack. This arrangement ensures proper airflow. Using a rack without blanking panels results in
improper cooling that can lead to thermal damage.
NOTE:
CD provided with the server, or to the server documentation located in the Support section at the
following URL:
The HP ProLiant DL380 quick deploy rail system provides tool-free support for racks with square
or round mounting holes (including Compaq/HP 7000*, 9000, 10000 and HP series), with an
adjustment range of 24" - 36". The ambidextrous cable management arm can be mounted on
either the left or right side for improved cable management.
NOTE:
cable management arm is mounted on the right.
*
NOTE:
327281-B21; or High Air Flow Rack Door Insert for the 7142 Rack (6-pack) - PN: 327281-B22)
are required to support the HP ProLiant DL380 G5 in 7000 series racks. The DL380 G5 Cable
Management Arm is not supported on 7000 series racks.
Always use blanking panels to fill all remaining empty front panel U-spaces in the
For additional information, refer to the Setup and Installation Guide or the Documentation
www.hp.com/servers/dl380
Cable management arm must be removed to access hot-plug power supplies when the
High Airflow Inserts (High Air Flow Rack Door Insert for the 7142 Rack (single) - PN:
.
DA - 12477 Worldwide QuickSpecs — Version 36 — 2/29/2008
Page 9
Telco Rack Support
DL380 G5 Telco Rack Kit:
Support for all 2-post Telco racks requires the use of the standard rack kit and an additional
option kit from Rack Solutions:
http://www.racksolutions.com/hp/
.
Factory Express
Portfolio for Servers
and Storage
HP Enterprise
Configurator
Service and Support
HP Factory Express offers configuration, customization, integration and deployment services for
HP servers and storage products. Customers can choose how their factory solutions are built,
tested, integrated, shipped and deployed.
Factory Express offers service packages for simple configuration, racking, installation, complex
configuration and design services as well as individual factory services, such as image loading,
asset tagging, and custom packaging. HP products supported through Factory Express include a
wide array of servers and storage: HP Integrity, HP ProLiant, HP ProLiant Server Blades, HP
BladeSystem, HP 9000 servers as well as the MSA1000, VA7xxx, EVA, XP, rackable tape
libraries and configurable network switches.
For more information on Factory Express services for your specific server model please contact
your sales representative or go to:
The HP eCo-Enterprise Configurator now provides factory default racking for our HP hardware
portfolio. This approach is aligned with our strategic direction to meet the needs and expectations
of our valued customers. If you require "custom" rack configuration, please contact HP's
Customer Business Center or an Authorized Partner for assistance.
http://www.hp.com/products/configurator
HP Care Pack services include coverage for the HP branded hardware options qualified for the
server and purchased at the same time or afterward that are internal to the enclosure. This also
includes the 22" and smaller external monitors and tower UPS options up to 3kVA. These items
will be covered at the same service level and for the same coverage period as the server.
Coverage of UPS Battery is not included, and standard warranty terms & conditions apply. For
servers or storage systems installed within a rack, service also covers all HP qualified rack
options installed within the same rack.
http://www.hp.com/go/factory-express
.
.
To fully capitalizing on your HP ProLiant servers' capabilities requires a service partner who
thoroughly understands your server technology and systems environment. HP Services, an
industry leader in provision of multi vender support solutions, provides a range of support services
designed to meet the varying needs of your business. Whether an SMB, or large global
corporation, HP has a ProLiant server support offer to help you speedily deploy and maximize
system uptime.
Recommended Service
management.
Support
Deployment Service
Enhanced Service
Support
Refer to the information on "Installation & Start-Up" for service on ProLiant server and Microsoft
or Linux O/S per the Customer Description and/or Data Sheet; to be delivered on a scheduled
basis 8am-5pm, M-F, excluding HP holidays.
For a complete listing of service offerings and information visit:
: 3-Year 4-Hour response 24x7 Same Business Day Coverage only
: 3-Year Support Plus 24 only
- simplify ProLiant solution implementation, maintenance, and
: Installation and Start up only
- optimize service level to increase IT performance and availability.
DA - 12477 Worldwide QuickSpecs — Version 36 — 2/29/2008
Page 10
NOTE:
Platform product portfolio. These high-speed interconnects are fully supported by HP when they are part of these configure
to order clusters. Solutions can be defined with a lot of flexibility with the help of configuration tools. Please visit the following
URL to configure HPC Clusters with InfiniBand, Gigabit Ethernet or Myrinet Interconnects:
DA - 12477 Worldwide QuickSpecs — Version 36 — 2/29/2008
Page 13
NOTE:
configurations are ordered, HP recommends the use of an HP approved configurator. Contact your local sales
representative for information on CTO product offerings and requirements.
NOTE:
start with a CTO Chassis.
NOTE:
NOTE:
This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid
HP does not allow factory integration of options into standard models listed above. Configure-to-order servers must
This product offering does not support HP Factory Express Server Configuration Level 1.
FIO indicates that this option only available as a Factory Installable Option.
Step 1: Base Configuration (choose one of the following configurable models)
Models
HP ProLiant DL380G5 Rack CTO Chassis
Factory Integrated Model ships with:
(8) SFF Serial Attached SCSI (SAS) Drive Bays
Two Embedded NC373i Multifunction Gigabit Server Adapters
PCI-Express Riser Cage
800Watt hot plug power supply, CE Mark Compliant
One IEC Power cord
Rack (2U), (3.5-inch)
391835-B21
Step 1A: Choose Controller (must choose only one of the following)
Controllers
HP Smart Array P400/256 for DL380 G5/ DL385 G2 FIO Controller
NOTE:
HP Smart Array P400/512 BBWC for DL380 G5/ DL385 G2 FIO Controller
NOTE:
HP Smart Array E200/128 BBWC Controller
NOTE:
HP Smart Array P800/512 BBWC Controller
NOTE:
drives.
HP Smart Array P600/256 BBWC Controller
NOTE:
HP Smart Array E200/64 FIO Controller
HP Smart Array 6402/512 FIO Controller
HP Smart Array 6404/512 FIO CNTRLR
PCI Express
PCI Express
PCI Express
PCI Express SA-P800 Controller supports both internal and external
PCI-X. SA-P600 Controller supports both internal and external drives.
405160-B21
405162-B21
411508-B21
381513-B21
337972-B21
405528-B21
441508-B21
452240-B21
Step 2: Choose Required Options (only one of the following from each list unless
otherwise noted)
The HP ProLiant DL380 G5 performance packs are necessary to configure a HP ProLiant DL380
G5 Performance Model. HP ProLiant DL380 G5 Performance model includes the latest
performance technologies and enterprise class availability features pre-installed for convenience
and value. The performance pack includes a 2nd processor and a redundant power supply.
NOTE:
parity to DL380 G5 High Performance Models.
HP DL380G5 X5460 HPM FIO Perf Pack
HP DL380G5 X5450 HPM FIO Perf Pack
HP DL380G5 E5345 HPM FIO Perf Pack
HP DL380G5 X5160 HPM FIO Perf Pack
HP DL380G5 X5150 HPM FIO Perf Pack
Must also select Slimline CD-RW/DVD-ROM Combo Option Kit (331903-B21) to achieve
Step 4: Choose Additional Options for Factory Integration
NOTE:
For additional options, please refer to the "Options" section below.
DA - 12477 Worldwide QuickSpecs — Version 36 — 2/29/2008
458588-B21
458589-B21
433559-B21
419812-B21
419811-B21
Page 15
NOTE:
Some options may not be integrated at the factory. Contact your local sales representative for additional
information.
HP ProLiant DL380 G5
Unique Options
Mixed Riser Cage Option Kit (PCI-E/PCI-X)
410570-B21
HP Insight Control
Management Suites
NOTE:
software products. Please see the appropriate Insight Control QuickSpecs for
additional information.
HP Insight Control Environment
HP Insight Control Environment, No Media 1-Server License including 1 year of
24x7 Technical Support and Updates
NOTE:
licenses with a single activation key. Customer will receive a license entitlement
certificate via e-mail. The license entitlement certificate must be redeemed
online or via fax in order to obtain the license activation key(s). Includes one
year of 24 x 7 HP Software Technical Support and Update Service. Only
available directly from HP and select resellers in the Americas region.
HP Insight Control Management Software Media Kit
NOTE:
Insight Manager and Essentials software products and components licensed by
Insight Control Management suites. Uses an integrated installer to perform
quick and accurate software installation and updates.
Electronic licensing options are available for Insight Control suites
This part number can be purchased as a single license or as multiple
Insight Control Management DVD media without licenses. Contains
For additional License Kits, please see the QuickSpecs at:
This option kit includes 1 license for iLO Advanced and Insight Power
For additional License Kits, please see the QuickSpecs at:
452148-B22
436222-B21
452145-B21
Server Management
Stand Alone Software
NOTE:
software products. Please see the appropriate ProLiant Essentials QuickSpecs
for additional information.
Deploy
ProLiant Essentials Rapid Deployment Pack
ProLiant Essentials Rapid Deployment Pack No Media 1-Server License
including 1 year of 24x7 Technical Support and Updates
NOTE:
Customer will receive a printed license entitlement certificate via physical
shipment. The license entitlement certificate must be redeemed online or via fax
in order to obtain the license activation key(s). Includes one year of 24 x 7 HP
Software Technical Support Service
HP Server Migration Pack - Universal Edition, No Media, Physical / Virtual to
ProLiant Single Migration License, including 1 year of 24x7 Technical Support
and Updates
NOTE:
Customer will receive a printed license entitlement certificate and
documentation via physical shipment. The license entitlement certificate must
be redeemed online or via fax in order to obtain the license activation key(s).
Includes one year of 24 x 7 HP Software Technical Support and Update
Service.
HP Server Migration Pack - Universal Edition, No Media, Physical / Virtual to
Virtual Single Migration License, including 1 year of 24x7 Technical Support and
Updates
NOTE:
Electronic licensing options are available for select ProLiant Essentials
This license allows 1 server to be deployed and managed via RDP.
For additional License Kits, please see the QuickSpecs at:
This license allows 1 physical to ProLiant or virtual to ProLiant migration.
This license allows 1 physical to virtual or virtual to virtual migration.
452151-B21
460750-B21
460753-B21
DA - 12477 Worldwide QuickSpecs — Version 36 — 2/29/2008
Page 16
Customer will receive a printed license entitlement certificate and
documentation via physical shipment. The license entitlement certificate must
be redeemed online or via fax in order to obtain the license activation key(s).
Includes one year of 24 x 7 HP Software Technical Support and Update
Service.
HP Server Migration Pack - Universal Edition, No Media, 1-Year Unlimited
Migration License, including 1 year of 24x7 Technical Support
NOTE:
virtual, virtual to virtual, and virtual to ProLiant) for one year. Customer will
receive a printed license entitlement certificate and documentation via physical
shipment. The license entitlement certificate must be redeemed online or via fax
in order to obtain the license activation key(s). Includes one year of 24 x 7 HP
Software Technical Support Service.
HP Insight Power Manager, No Media, 1-Server License, including 1 year of
24x7 Technical Support and Updates
NOTE:
Advanced or Select license on each managed server. Customer will receive a
printed license entitlement certificate via physical shipment. The license
entitlement certificate must be redeemed online or via fax in order to obtain the
license activation key(s). Includes one year of 24 x 7 HP Software Technical
Support and Update Service.
ProLiant Essentials Virtual Machine Management Pack, No Media, 1-Server
License, including 1 year of 24x7 Technical Support and Updates
NOTE:
physical shipment. The license entitlement certificate must be redeemed online
or via fax in order to obtain the license activation key(s). Includes one year of 24
x 7 HP Software Technical Support and Update Service.
QuickSpecs for Technical Specifications such as capacity, height, width,
interface, transfer rate, seek time, physical configuration, and operating
temperature:
Please see the SAS Hard Drive QuickSpecs for Technical Specifications
SATA drives have a 1 year warranty. Please see the SATA Hard Drive
418367-B21
431958-B21
418371-B21
431935-B21
384842-B21
375861-B21
418369-B21
431933-B21
431786-B21
379306-B21
Storage Controllers
SAS Controllers
Smart Array E200 Controller
HP Smart Array E200/128 BBWC Controller
128-MB BBWC (Battery-Backed Write Cache) Enabler
NOTE:
and Smart Array 642 Controller.
Smart Array E500 Controller
Smart Array E500/256MB Controller
Smart Array P400 Controller
HP Smart Array P400/256MB Controller
HP Smart Array P400/512MB BBWC Controller
512MB Battery-backed cache upgrade
NOTE:
Battery-backed write cache upgrade
NOTE:
Smart Array P400 Battery Attach Kit
NOTE:
installing a battery into the HP ProLiant DL380 G5 if a Smart Array P400 is
integrated outside of the factory. For all solutions, please refer to the server
QuickSpecs and User's Manual for detailed installation instructions.
Smart Array P600 Controller
HP Smart Array P600/256 BBWC Controller
NOTE:
512 MB Battery-Backed Cache Upgrade
NOTE:
Smart Array P600 Controller and the Smart Array 6400 series Controller.
Smart Array P800 Controller
HP Smart Array P800/512 BBWC Controller
NOTE:Please see the following QuickSpecs for Technical Specifications and
For an up-to-date listing of the latest O/S and software support details for HP
Ultrium tape drives, please visit:
Rack-Mount Tape Drive Enclosures
HP StorageWorks 1U SCSI Rack-Mount kit
NOTE:
is compatible with multiple Single-Ended and LVD SCSI tape drives including
the DAT 40, DAT 72, DAT 160, DLT VS160, LTO-1 Ultrium 232, LTO-2 Ultrium
448 and LTO-3 Ultrium 920 tape drives.
HP StorageWorks 1U USB Rack-Mount Kit
NOTE:
drives and is compatible with the DAT 40 USB, DAT 72 USB and DAT 160 tape
drives.
HP StorageWorks 1U SAS Rack-Mount Kit
NOTE:
drives and is compatible with the LTO-2 Ultrium 448 SAS, LTO-3 Ultrium 920
SAS tape drives.
HP StorageWorks FC2242SR Dual Channel 4 Gb PCI-e HBA
HP StorageWorks FC1142SR 4Gb PCI-e HBA
HP StorageWorks FC1242SR Dual Channel 4 Gb PCI-e HBA
HP StorageWorks FC2143 4Gb PCI-X 2.0 -to-Fibre Channel HBA
HP StorageWorks FC2243 Dual Channel 4Gb PCI-X 2.0 HBA
HP StorageWorks FC1143 4Gb PCI-X 2.0 HBA
HP StorageWorks FC1243 Dual Channel 4Gb PCI-X 2.0 HBA
HP StorageWorks 81Q PCI-e FC HBA
StorageWorks SCSI HBA
HP U320e SCSI Host Bus Adapter
NOTE:
multi-drive MSL tape libraries to ProLiant servers.
For additional information regarding the ProLiant Cluster Starter Kit
For additional information regarding HP Serviceguard for Linux, please
For configuration/certification options for HP Serviceguard for Linux
http://www.hp.com/info/sglx
For the complete listing of Fibre Channel Host Bus Adapters for
Recommended Dual Channel Ultra320 SCSI Controller for connecting
364023-B22
305199-B27
307754-B27
T2798AA#001
T2798AA#003
A8002A
A8003A
AE311A
AE312A
AD167A
AD168A
AB429A
AE369A
AK344A
AH627A
HP StorageWorks
Modular Smart Array
20
HP StorageWorks Modular Smart Array 20
NOTE:
Rack-mountable 12 (SATA) drive enclosure with U320 Host connectivity,
redundant power supplies.
NOTE:
Please see the Modular Smart Array 20 QuickSpecs for additional
information including configuration steps and additional options needed for a
complete solution at:
Rack-mountable 14 drive enclosure with single bus, redundant power
Rack-mountable 14 drive enclosure with dual bus, redundant power
Please see the Modular Smart Array 30 QuickSpecs for additional
302969-B21
302970-B21
HP StorageWorks
Modular Smart Array
50
HP StorageWorks
Modular Smart Array
60
HP StorageWorks
Modular Smart Array
70
HP StorageWorks Modular Smart Array 50 Enclosure
NOTE:
Please see the Modular Smart Array 50 QuickSpecs for additional
information including configuration steps and additional options needed for a
complete solution at:
Please see the Modular Smart Array 60 QuickSpecs for additional
information including configuration steps and additional options needed for a
complete solution at:
Please see the Modular Smart Array 70 QuickSpecs for additional
information including configuration steps and additional options needed for a
complete solution at:
xxxxxx-B22 (shock pallet) used to ship racks with equipment installed (by
It is mandatory to use a shock pallet in order to ship racks with
Please see the Rack 10000 QuickSpecs for Technical Specifications
For additional information regarding Rack Cabinets, please see the
http://www.hp.com/go/rackandpower
.
292302-B22
Keyboards and
Monitors
TFT7210R Rack Mounted 17" Monitor
TFT7600 Rackmount Keyboard Monitor US
TFT7600 Rackmount Keyboard Monitor UK
TFT7600 Rackmount Keyboard Monitor GR
TFT7600 Rackmount Keyboard Monitor FR
TFT7600 Rackmount Keyboard Monitor IT
TFT7600 Rackmount Keyboard Monitor SP
TFT7600 Rackmount Keyboard Monitor DEN
TFT7600 Rackmount Keyboard Monitor NOR
TFT7600 Rackmount Keyboard Monitor SE/FI
TFT7600 Rackmount Keyboard Monitor SWI
TFT7600 Rackmount Keyboard Monitor PORT
TFT7600 Rackmount Keyboard Monitor BEL
TFT7600 Rackmount Keyboard Monitor JPN2
TFT7600 Rackmount Keyboard Monitor RUS
TFT7600 Rackmount Keyboard Monitor INTL
1U Rackmount Keyboard with USB, US
1U Rackmount Keyboard with USB, UK
1U Rackmount Keyboard with USB, GR
1U Rackmount Keyboard with USB, FR
1U Rackmount Keyboard with USB, ITL
1U Rackmount Keyboard with USB, SP
1U Rackmount Keyboard with USB, DEN
1U Rackmount Keyboard with USB, NOR
1U Rackmount Keyboard with USB, SE/FI
1U Rackmount Keyboard with USB, SWI
1U Rackmount Keyboard with USB, PORT
1U Rackmount Keyboard with USB, BEL
1U Rackmount Keyboard with USB, JPN2
1U Rackmount Keyboard with USB, RUS
1U Rackmount Keyboard with USB, INTL
NOTE:
following URL:
For additional information regarding Rack Options, please see the
http://www.hp.com/go/rackandpower
348373-B21
AG052A
AG053A
AG054A
AG055A
AG056A
AG057A
AG058A
AG059A
AG060A
AG061A
AG062A
AG063A
AG064A
AG065A
AG066A
AG072A
AG073A
AG074A
AG075A
AG076A
AG077A
AG078A
AG079A
AG080A
AG081A
AG082A
AG083A
AG084A
AG085A
AG086A
.
DA - 12477 Worldwide QuickSpecs — Version 36 — 2/29/2008
Page 27
HP KVM Switch
Options
2x1x16 IP Console Switch with Virtual Media
4x1x16 IP Console Switch with Virtual Media
2x16 Server Console Switch with Virtual Media
PS/2 Virtual Media Interface Adapter, 1 pack
NOTE:
Requires PS/2 and one USB port on server.
Server Console Switch (KVM), 0 x 1 x 8 port
Server Console Switch (KVM), 0 x 2 x 16 port
PS/2 Interface Adapter, 1 pack
PS/2 Interface Adapter, 8 pack
USB Interface Adapter, 1 pack
Serial Interface adapter - 1 Pack with power supply
NOTE:
Switches. Cat5e cables can be found at the following URL:
http://www.hp.com/go/kvm
HP 1x4 Console Switch
HP PS2 Server Console Cable, 6 foot, 2-Pack
HP USB Server Console Cable, 6 foot, 2-Pack
NOTE:
NOTE:
servers, rack mount monitors, keyboards and all related options please see the
following URL:
Cat5e cables are required to connect Interface Adapters to Console
.
Required for supporting USB peripherals.
For additional information regarding KVM switches, Serial Console
http://www.hp.com/go/kvm
.
AF601A
AF602A
AF600A
AF604A
336044-B21
336045-B21
262588-B21
262587-B21
336047-B21
373035-B21
AF611A
AF612A
AF613A
HP Serial Console
Server Options
Service and Support
Offerings
(HP Care Pack
Services)
HP 16 Port Serial Console Server (worldwide)
HP 48 Port Serial Console Server (worldwide)
Serial Adapter, RJ45-DB9 DCE Female, 1 Pack
Serial Adapter, RJ45-DB9 DCE Female, 8 Pack
NOTE:
Cat5e cables are required to connect Serial Adapters to Serial Console
Servers. Additional Serial Adapters and Cat5e cables can be found at the
following URL:
NOTE:
For additional information regarding KVM switches, Serial Console
servers, rack mount monitors, keyboards and all related options please see the
following URL:
Hardware Services On-site Service
4-Hour On-site Service, 5-Day x 13-Hour Coverage, 3 Years, Electronic
4-Hour On-site Service, 7-Day x 24-Hour Coverage, 3 Years, Electronic
Hardware Services 6-Hour Call to Repair On-site Service
6-Hour Call to Repair, On-site Service, 7-Day x 24-Hour Coverage, 3 Years,
Electronic
Installation & Start-up Services
Hardware Installation, Electronic
Installation & Start-Up of a ProLiant server and Microsoft or Linux O/S per the
Customer Description and/or Data Sheet. To be delivered on a scheduled basis
8am-5pm, M-F, excl. HP holidays, Electronic
Installation and Startup for Essentials Rapid Deployment Pack, Electronic
Support Plus
Onsite HW support, 8am-9pm, M-F, 4hr response and Microsoft O/S SW Tech
support offsite, onsite at HP's discretion, 8am-9pm, M-F 2hr response time excl.
HP holidays, Electronic
Support Plus 24
Onsite HW support 24x7, 4hr response and Microsoft O/S SW Tech support
offsite, onsite at HP's discretion, 24x7 2hr response time incl. HP holidays,
Electronic
Onsite HW support 24x7, 4hr response and SuSE Linux SW Tech support
offsite, onsite at HP's discretion, 24x7 2hr response time incl. HP holidays,
Electronic
http://www.hp.com/go/kvm
http://www.hp.com/go/kvm
.
.
AF101A
AF102A
AF103A
AF110A
U4544E
U4545E
U4546E
U4554E
U4555E
U5683E
U4556E
U4557E
U6312E
DA - 12477 Worldwide QuickSpecs — Version 36 — 2/29/2008
Page 28
Onsite HW support 24x7, 4hr response and Red Hat ES Linux SW Tech support
offsite, onsite at HP's discretion, 24x7 2hr response time incl. HP holidays,
Electronic
NOTE:
For more information, customer/resellers can contact:
http://www.hp.com/services/carepack
U8334E
DA - 12477 Worldwide QuickSpecs — Version 36 — 2/29/2008
When upgrading memory, DIMMs 1A and 2A must match. DIMMs 3B and 4B, DIMMs 5C and 6C, and DIMMs 7D and 8D
must match and must be installed as a pair. When DIMMs 1A and 2A are populated the system is automatically configured
for 2:1 interleaving. When all 4 banks are populated the system is automatically configured for 4:1 interleaving. When four,
six, or eight DIMMs are populated with identical DIMMs the system is automatically configured for bank interleaving.
Standard Memory Plus Optional Memory
Up to 26 GB memory is available with the standard memory and the optional installation of PC2-5300 Fully Buffered DIMMs
(DDR2-667) memory kits.
Standard Memory Replaced with Optional Memory
Up to 32 GB of memory is available with the removal of the standard memory and the optional installation of PC2-5300
Fully Buffered DIMMs (DDR2-667) memory kits.
Memory configurations listed do not apply to "Factory Integrated Models".
NOTE:
NOTE:
If only banks A and B are populated, bank B is the spare bank. If banks A, B, and C are populated, bank C is the spare
bank, Online spare memory is configured through RBSU.
NOTE:
implement or not: User selectable via BIOS and default is off.
Following are memory options available from HP:
1 GB FBD PC2-5300 2 x 512 MB Kit
2 GB FBD PC2-5300 2 x 1 GB Kit
2 GB FBD PC2-5300 2 x 1 GB LP Kit
4 GB FBD PC2-5300 2 x 2 GB Kit
4 GB FBD PC2-5300 2 x 2 GB LP Kit
8 GB FBD PC2-5300 2 x 4 GB Kit
8 GB FBD PC2-5300 2 x 4 GB LP Kit
NOTE:
Features, please visit:
In Advanced ECC mode, FBDIMMs must be populated as specified in the following table:
Chart does not represent all possible configurations.
Memory
12345678
Standard
Optional
Maximum
In the online spare configuration, the ROM automatically configures the last populated bank as the spare memory.
Mirrored Memory uses mirrored banks to provide a high level of memory redundancy. Customer chooses to
Memory Option Kits described as LP include Low Power DIMMs. For more information on ProLiant Energy Efficient
DA - 12477 Worldwide QuickSpecs — Version 36 — 2/29/2008
Page 30
Online spare memory configuration
Online spare FBDIMM configuration requirements (in addition to general configuration requirements):
When only bank A is being used, it must be fully populated with dual-rank FBDIMMs.
If banks A and C are being used, they must be fully populated.
If installed, bank A and bank C must contain FBDIMMs with identical part numbers.
If installed, bank B and bank D must also contain FBDIMMs with identical part numbers.
In online spare mode, FBDIMMs must be populated as specified in the following table:
Branch 0
Configuration
1
*
2
3
* Configuration 1 is only supported if using bank A, populated with dual-rank FBDIMMs. All FBDIMMs 1GB and above are
dual-rank.
After installing FBDIMMs, use RBSU to configure the system for online spare memory support ("Configuring online spare
memory" on page 57).
Mirrored memory configuration
Mirrored memory FBDIMM configuration requirements (in addition to general configuration requirements):
Bank A
1A and 3A
X
XX
XXXX
Branch 0
Bank C
2C and 4C
---
Branch 1
Bank B
5B and 7B
--
Branch 1
Bank D
6D and 8D
Banks A and B must be fully populated.
Bank A and bank B must contain FBDIMMs with identical part numbers. If installed, bank C and bank D must also
contain FBDIMMs with identical part numbers.
When using mirrored memory mode, FBDIMMs must be populated as specified in the following table:
Configuration
1
2
NOTE:
After installing FBDIMMs, use RBSU to configure the system for mirrored memory support ("Configuring mirrored
memory" on page 57).
Bank A
1A and 3A
XX
XXXX
Bank B
5B and 7B
Bank C
2C and 4C
--
Bank D
6D and 8D
DA - 12477 Worldwide QuickSpecs — Version 36 — 2/29/2008
Page 31
Drive Support
1-8
Eight SFF SAS hot plug hard drive bays
Removable Media
1.44-MB Diskette Drive
Slimline CD-RW/DVDROM Combo Option Kit
NOTE:
performance models.
Slimline DVD-ROM
Drive (8x/24x) Option Kit
HP ProLiant Slim CDROM x24
HP DVD+R/RW 8X Slim
Hard Drives
SFF SAS - Hot Plug Drives
146GB 3G SAS 10K SP
146GB 3G SAS 10K DP
72GB 3G SAS 10K SP
72GB 3G SAS 10K DP
72GB 3G SAS 15K SP
72GB 3G SAS 15K DP
36GB 3G SAS 15K SP
36GB 3G SAS 15K DP
SATA - Hot Plug Drives
120GB 1.5G SATA 5.4K
60GB 1.5G SATA 5.4K
Included in
Quantity
Supported
Only 1 available
removable
media bay
Only 1 available
removable
media bay
Only 1 available
removable
media bay
Only 1 available
removable
media bay
Only 1 available
removable
media bay
Quantity
Supported
Up to 8
Quantity
Supported
Up to 8
Position
Supported
Slimline bay
Slimline bay
Slimline bay
Slimline bay
Slimline bay
Position
Supported
1-8
Position
Supported
1-8
Controller
Integrated diskette
NOTE:
Integrated IDE
NOTE:
Integrated IDE
NOTE:
Integrated IDE
NOTE:
Integrated IDE
NOTE:
Controller
HP Smart Array E200/64MB Controller
HP Smart Array E200/128 BBWC Controller
HP Smart Array E500 Controller
HP Smart Array P400/256MB Controller
HP Smart Array P400/512MB BBWC Controller
HP Smart Array P600/256 BBWC Controller
NOTE:
HP Smart Array P800/512 BBWC Controller
Controller
HP Smart Array E200/64MB Controller
HP Smart Array E200/128 BBWC Controller
HP Smart Array E500 Controller
HP Smart Array P400/256MB Controller
HP Smart Array P400/512MB BBWC Controller
HP Smart Array P600/256 BBWC Controller
NOTE:
HP Smart Array P800/512 BBWC Controller
Optional
Optional
Optional
Optional
Optional
Optional mixed PCI-X/E required for SA-P600.
Optional mixed PCI-X/E required for SA-P600.
DA - 12477 Worldwide QuickSpecs — Version 36 — 2/29/2008
with tape drive) deactivates 1 of the hard drive bays. Actual hard drive bay deactivated depends on where split cable plugs
into SAS drive connector. Example: 3x SAS cable connector plugged into SAS drive connector (5-8) on the back of the
hard drive cage would mean drive bay 8 is deactivated.
HP StorageWorks
SCSI Tape Drives,
External
For an up-to-date listing of the latest O/S Support details for each of the Tape Drives listed below, please see the
For an up-to-date listing of the latest O/S Support details for each of the Tape Autoloaders and Tape Libraries listed
For complete listing of tape drive offerings see:
SAS Tape Drives: Connecting hard drive cage and SAS tape to the same SAS Controller using split cable (supplied
- (with MSA50)
1.168TB (8 x 146GB SAS SFF)
2.920TB (20 x 146GB SAS SFF)
4.088TB
Position
Supported
External
Controller
HP SC11Xe Host Bus Adapter
(Worldwide)
(Worldwide)
Part Number
412911-B21
DA - 12477 Worldwide QuickSpecs — Version 36 — 2/29/2008
DAT 40 USB
DAT 72 USB
DAT 160 USB
1U Rack-Mount Kit
HP StorageWorks
SAS Tape Drives,
External
DAT 160 SAS
LTO-2 Ultrium 448
SAS
LTO-3 Ultrium 920
SAS
LTO-4 Ultrium 1760
SAS
LTO-4 Ultrium 1840
SAS
1U Rack-Mount Kit
HP StorageWorks
SCSI Tape
Automation,
External
DAT 72x10
Autoloader 1/8 G2
Autoloader
MSL2024
MSL4048
MSL8096
MSL6000
HP StorageWorks
SAS Tape
Automation,
External
1/8 G2 Autoloader
MSL2024
MSL4048
MSL8096
HP StorageWorks
Fibre Tape
Automation,
External
MSL2024
MSL4048
MSL8096
External
External
External
External
External
USB 2.0 Port
HP SC44Ge Host Bus Adapter
NOTE:
HP Smart Array P400/256MB Controller
HP Smart Array P400/512MB Controller
NOTE:
controller firmware version and SAS cabling requirements.
HP SC11Xe Host Bus Adapter
HP U320e SCSI Host Bus Adapter
NOTE:
HP SC44Ge Host Bus Adapter
NOTE:
minimum SAS controller firmware version and SAS cabling
requirements.
Please consult the EBS connectivity matrix at
http://www.hp.com/go/ebs
Recommended.
Please visit:
Only valid for MSL tape libraries.
Please visit
http://www.hp.com/go/connect
http://www.hp.com/go/connect
for detailed connectivity information.
for details about minimum SAS
for details about
N/A
416096-B21
405132-B21
411064-B21
412911-B21
AH627A
416096-B21
N/A
DA - 12477 Worldwide QuickSpecs — Version 36 — 2/29/2008
Page 34
MSL6000
HP StorageWorks
D2D Backup
Systems
D2D110
D2D120
D2D130
External
Embedded Network Controller
N/A
DA - 12477 Worldwide QuickSpecs — Version 36 — 2/29/2008
Page 35
Power Supply Specification - AC
Operational Input Voltage Range
(Vrms)
Frequency Range (Nominal) (Hz)
Nominal Input Voltage (Vrms)
Max Rated Output Wattage Rating
Nominal Input Current (A rms)
Max Rated Input Wattage Rating
(Watts)
Max. Rated VA (Volt-Amp)
Efficiency (%)
Power Factor
Leakage Current (mA)
Max. Inrush Current (A peak)
Max. Inrush Current duration (mS)
Part number
Spare Kit
100120208220230240
8008501000100010001000
10.0
98010351193118611721169
100010561217121011961193
81.5
0.980.980.980.980.980.98
0.440.520.910.961.001.04
303030303030
333333
8.8
82848485
380622-001
403781-001
90 to 264
47 to 63 (50/60)
5.85
5.55.2
4.97
85.5
Power Supply Specification - DC
Operational Input Voltage Range
(Vrms)
Frequency Range (Nominal) (Hz)
Nominal Input Voltage (Vrms)
Max Rated Output Wattage Rating
Nominal Input Current (A rms)
Max Rated Input Wattage Rating
(Watts)
Efficiency (%)
Max. Inrush Current (A peak)
Max. Inrush Current duration (mS)
NOTES:
- To review typical system power ratings use the Active Answers Power Calculator which is available via the online tool
located at url:
To drill down to calculators:
Click on: "ProLiant Servers"
Click on the Server of interest. Example: DL380 G5
Click on: "Power Calculator" link. (You may need to scroll down to see it)
DA - 12477 Worldwide QuickSpecs — Version 36 — 2/29/2008
Page 36
System Unit
Dimensions
(with bezel)
Weight
Input Requirements
(per power supply)
BTU Rating
Power Specifications
(H x W x D)
(approximate)
3.38 x 17.54 x 26.01 in (8.59 x 44.54 x 66.07 cm)
Maximum
(all hard drives, power
supply, and processor
installed)
Minimum
(one hard drive, power
supply, and processor
installed)
Rated Line Voltage
Rated Input Current
Rated Input Frequency
Rated Input Power
Maximum
To review typical system power ratings use the Power Calculator which
is available via the online tool located at URL:
- Click on the system of interest. Example: DL380 G5
- Follow the instructions of the next screens.
Rated Steady-State
Power
Maximum Peak Power
Operating
Non-operating
Operating
Non-operating
Operating
Non-operating
800 W (at 100 VAC)
850 W (at 120 VAC)
1000W (qt 200-240 VAC)
800 W (at 100 VAC)
850 W (at 120 VAC)
1000W (at 200-240 VAC)
10° to 35°C (50° to 95°F) at sea level with an
altitude derating of 1.0°C per every 305 m
(1.8°F per every 1000 ft) above sea level to a
maximum of 3050 m (10,000 ft), no direct
sustained sunlight. Maximum rate of change
is 10°C/hr (18°F/hr). The upper limit may be
limited by the type and number of options
installed.
System performance may be reduced if
operating with a fan fault or above 30°C
(86°F).
-30° to 60°C (-22° to 140°F). Maximum rate of
change is 20°C/hr (36°F/hr).
10 to 90% relative humidity (Rh), 28°C
(82.4°F) maximum wet bulb temperature,
non-condensing.
5 to 95% relative humidity (Rh), 38.7°C
(101.7°F) maximum wet bulb temperature,
non-condensing.
3050 m (10,000 ft). This value may be limited
by the type and number of options installed.
Maximum allowable altitude change rate is
457 m/min (1500 ft/min).
9144 m (30,000 ft). Maximum allowable
altitude change rate is 457 m/min (1500
ft/min).
DA - 12477 Worldwide QuickSpecs — Version 36 — 2/29/2008
Page 37
Acoustic Noise
Listed are the declared A-Weighted sound power levels (LWAd) and
declared average bystander position A-Weighted sound pressure levels
(LpAm) when the product is operating in a 23°C ambient environment.
Noise emissions were measured in accordance with ISO 7779 (ECMA
74) and declared in accordance with ISO 9296 (ECMA 109).
Idle
LWAd
LpAm
Operating
LWAd
LpAm
6.1 B
44 dBA
6.1 B
44 dBA
Smart Array P400
Controller
Smart Array E200
Controller
Disk Drive and
Enclosure Interface
SAS Connectors
Cache Memory Speed
Server Interface
SAS Speed
Cache Memory
Logical Drives
Supported
Host Memory
Addressing
RAID Support
Disk Drive and
Enclosure Interface
SAS Connectors
Cache Memory Speed
Server Interface
SAS Speed
Cache Memory
Logical Volumes
Supported
Maximum Volume
Capacity
Host Memory
Addressing
RAID Support
3G SAS (Serial Attached SCSI)
1.5G SATA (Serial Advanced Technology Attachment)
2 internal (SFF8484) x4 wide port connectors
DDR2-533MHz with 40 or 72-bit wide bus provides up to 4.2 GB/s
maximum bandwidth.
The information contained herein is subject to change without notice.
Microsoft and Windows NT are US registered trademarks of Microsoft Corporation.
Intel, the Intel logo, Xeon and Xeon Inside are trademarks of Intel Corporation in the U.S. and other countries.
The only warranties for HP products and services are set forth in the express warranty statements accompanying such
products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for
technical or editorial errors or omissions contained herein.
End-of-life
Management and
Recycling
Hewlett-Packard offers end-of-life HP product return, trade-in, and
recycling programs in many geographic areas. For trade-in information,
please go to
please go to:
sales office. Products returned to HP will be recycled, recovered or
disposed of in a responsible manner.
The EU WEEE directive (2002/95/EC) requires manufacturers to
provide treatment information for each product type for use by
treatment facilities. This information (product disassembly instructions)
is posted on the Hewlett Packard web site at:
http://www.hp.com/go/green
recyclers and other WEEE treatment facilities as well as HP OEM
customers who integrate and re-sell HP equipment.
http://www.hp.com/go/green
http://www.hp.com/go/green
. These instructions may be used by
. To recycle your product,
or contact your nearest HP
For hard drives, 1 GB = 1 billion bytes. Actual formatted capacity is less.
DA - 12477 Worldwide QuickSpecs — Version 36 — 2/29/2008
Page 39
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.