Hp MSR4000, MSR2000, MSR3000 User Manual
A
bout the HP MSR2000/3000/4000
Command References
Part number: 5998-4006
Software version: CMW710-R0007P02
Document version: 6PW100-20130927
Legal and notice information
© Copyright 2013 Hewlett-Packard Development Company, L.P.
No part of this documentation may be reproduced or transmitted in any form or by any means without
prior written consent of Hewlett-Packard Development Company, L.P.
The information contained herein is subject to change without notice.
HEWLETT-PACKARD COMPANY MAKES NO WARRANTY OF ANY KIND WITH REGARD TO THIS
MATERIAL, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE. Hewlett-Packard shall not be liable for errors contained
herein or for incidental or consequential damages in connection with the furnishing, performance, or
use of this material.
The only warranties for HP products and services are set forth in the express warranty statements
accompanying such products and services. Nothing herein should be construed as constituting an
additional warranty. HP shall not be liable for technical or editorial errors or omissions contained
herein.
About the HP MSR2000/3000/4000
Command References
These command references apply to the following models of the HP MSR2000/3000/4000 routers:
Model
MSR2000
MSR3000
• MSR2003
• MSR3012
• MSR3024
• MSR3044
• MSR3064
MSR4000
The HP MSR2000/3000/4000 command references describe the commands and command syntax
options available for the HP MSR2000/3000/4000 Routers.
Command reference Content
Covers the commands for logging in to and setting up an MSR router. This
command reference includes:
• CLI
• RBAC
• Login Management
Fundamentals Command
Reference
Interface Command Reference
Layer 2 – LAN Switching
Command Reference
• FTP and TFTP
• File System Management
• Configuration file management
• Software upgrade
• Emergency shell
• Automatic Configuration
• Device Management
• Tcl
Covers the interface configuration commands. This command reference
includes:
• Bulk interface
• Ethernet interface
• WAN interfaces
• POS interface
• Loopback, null, and inloopback interface
Covers the commands for configuring Layer 2 technologies and features in
a LAN switched network. This command reference includes:
• MAC Address Table
• Por t Isolation
• Spanning Tree
• MSR4060
• MSR4080
Loading...