HP ProLiant ML350 Generation 3HP ProLiant ML350 Generation 3
1. Two Removable Media Bays
2. 48X Max IDE (ATAPI) CD-ROM Drive
3. 1.44 Floppy Drive
4. Six 1” Hot Plug Drive Bays
5. Five expansion slots(four 64-bit/100-MHz PCI-X, one 32-bit/33-MHz PCI)
What's New
What's New
What's NewWhat's New
Now available with Intel® Xeon 3.06 GHz processors with 533MHz system bus.
6. System fan
7. Four DIMM sockets for up to 8GB of memory, optionally interleaved
8. Optional 2nd Power Supply for hot-pluggable 1+1 redundancy
DA - 11430 Worldwide — Version 38 — February 13, 2004
Page 1
QuickSpecs
HP ProLiant ML350 Generation 3
HP ProLiant ML350 Generation 3
HP ProLiant ML350 Generation 3HP ProLiant ML350 Generation 3
Overview
At A Glance
At A Glance
At A GlanceAt A Glance
The ProLiant ML350 G3 is an expandable rack or tower platform delivering affordable 2-way performance and essential availability to corporate
workgroups and growing businesses
Intel Xeon 2.4 GHz, 2.8 GHz or 3.06GHz processors (dual processor capability) with 512-KB level 2 cache standard (full speed) and Hyper-Threading
Technology
ServerWorks Grand Champion LE Chipset
Up to 533-MHz Front Side Bus (model dependent)
Integrated Dual Channel Wide Ultra3 SCSI Adapter
Smart Array 641 (standard in Array Models only)
NC7760 PCI Gigabit Server Adapter (embedded)
Up to 512MB of 2-way interleaving capable PC2100 DDR SDRAM, with Advanced ECC capabilities (Expandable to 8GB ):
Flexible memory configurations allow interleaving (2x1) or non-interleaving
Five expansion slots: four 64-bit/100-MHz PCI-X, one 32-bit/33-MHz PCI
Two USB ports
Standard 6 x 1” Wide Ultra320 ready Hot Plug Drive Cage
Internal storage capacity of up to 880GB (6 x 146.8 GB 1”), 1.174-TB (2 x 146.8 GB 1” + 6 x 146.8 GB 1”) with optional 2-bay hot plug drive cage
option
500W Hot-Pluggable Power Supply (standard) and an optional 500W Hot-Pluggable Redundant Power Supply (1+ 1) available
Tool-free entry to chassis and access to components
ROM based setup utility (RBSU) support and, redundant ROM
Insight Manager, SmartStart, and Automatic Server Recovery (ASR-2)
Protected by HP Services, including a three-year, next business day, on-site, limited global warranty and extended Pre-Failure Warranty.
DA - 11430 Worldwide — Version 38 — February 13, 2004
For more information regarding ServerWorks, please see the following URL:
I/O (5 Total, 5 Available)
64-bit/100MHz, PCI
32-bit/33MHz, PCI
256MB
512MB
8 GB
.
4 (4 available)
(Array model has 3 available)
1 (1 available)
PCI Voltage:
3.3 Volt or universal cards
5 Volt or universal cards
Storage
Storage
StorageStorage
Diskette Drives
CD-ROM
Hard Drives
Maximum Internal Storage
External Storage
DA - 11430 Worldwide — Version 38 — February 13, 2004
1.44 MB
48x IDE (ATAPI) CD-ROM Drive
None
1.174 TB GB (6 x 146.8 GB 1” with standard internal hot plug drive cage + (2 x 146.8 GB
1”) with optional ML3xx Two Bay Hot Plug SCSI Drive Cage)
Two external SCSI knockouts available, optional ProLiant ML350 Internal to External SCSI
Cable Option Kit required
HD68 Internal to External SCSI Cable Option Kit PN 159547-B22
VHDCI Internal to External SCSI Cable Option Kit PN 333370-B21
Page 3
QuickSpecs
Standard Features
Interfaces
Interfaces
InterfacesInterfaces
Graphics
Graphics
GraphicsGraphics
Form Factor
Form Factor
Form FactorForm Factor
Parallel
Serial
Pointing Device (Mouse)
Graphics
Keyboard
Network RJ-45
USB
External SCSI knockouts
Integrated ATI RAGE XL Video Controller with 8-MB SDRAM Video Memory
Tower or rack (5U)
NOTE:
NOTE:
NOTE: NOTE:
http://www.racksolutions.com/compaq/products.htm
Rack models (and rack conversion kit) support:
Square hole racks from 27”- 32” deep (including Compaq/HP 7000, 9000, 10000 and H9 series)
Square or round hole racks, from 24”- 35” deep (including HP Rack System /E and HP Systems, with an adjustment)
Telco racks with 3rd part option kit from Rack Solutions
HP ProLiant ML350 Generation 3
HP ProLiant ML350 Generation 3
HP ProLiant ML350 Generation 3HP ProLiant ML350 Generation 3
Please see the following URL for additional information regarding USB support:
.
DA - 11430 Worldwide — Version 38 — February 13, 2004
Page 4
QuickSpecs
Standard Features
ProLiant Essentials
ProLiant Essentials
ProLiant EssentialsProLiant Essentials
Foundation Pack
Foundation Pack
Foundation PackFoundation Pack
Software
Software
SoftwareSoftware
Insight Manager 7 and
HP Systems Insight Manager
HP ProLiant ML350 Generation 3
HP ProLiant ML350 Generation 3
HP ProLiant ML350 Generation 3HP ProLiant ML350 Generation 3
Insight Manager 7 and HP's new HP Systems Insight Manager help maximize system
uptime and performance and reduce system maintenance costs by providing proactive
notification of problems before those problems result in unplanned downtime or reduced
productivity. Insight Manager 7 and HP Systems Insight Manager are both easy to set up
work with the Insight Management Agents, integrated Light-Out and Remote Insight LightOut Edition, and Version Control Agents to deliver robust fault, configuration, and asset
management as well as remote administration. With HP Systems Insight Manager
customers will also be able to take advantage of role-based security; the ability to manage
ProLiant, Integrity, and HP 9000 systems; and plug-ins for storage, client, printer, and
power management as well as server rapid deployment, performance management, and
workload management. For more details on HP Systems Insight Manager visit
http://www.hp.com/go/hpsim
.
Management Agents
SmartStart
ActiveUpdate
ROMPaq, support software,
and configuration utilities
Survey Utility and diagnostics
utilities
Optional Proliant Essentials
Value Packs
NOTE
NOTE
: Flexible and volume quantity license kits are available for ProLiant Essentials Value Packs. Refer to
NOTENOTE
http://www.hp.com/servers/proliantessentials
information.
NOTE:
NOTE:
NOTE: NOTE:
http://www.hp.com/servers/proliantessentials
For more information regarding ProLiant Essentials Software, please see the following URL:
The Management Agents form the foundation for HP's Intelligent Manageability strategy.
They provide direct, browser-based access to in-depth instrumentation built into HP servers,
workstations, desktops, and portables, and send alerts to Insight Manager 7 and other
enterprise management applications in case of subsystem or environmental failures. For
additional information about the Management Agents and other management products
from HP, please visit the management Web site at
SmartStart is a tool that simplifies server setup, providing a rapid way to deploy reliable
and consistent server configurations. For more information, please visit the SmartStart Web
site at
http://www.hp.com/servers/manage
SmartStart version supported (minimum): SmartStart 5.50
ActiveUpdate is a web-based application that keeps IT managers directly connected to HP
for proactive notification and delivery of the latest software updates.
The latest software, drivers, and firmware fully optimized and tested for your ProLiant server
and options.
The most advanced configuration analysis, reporting and troubleshooting utilities used by
HP and at your fingertips.
Optional software offerings that selectively extend the functionality of an Adaptive
Infrastructure to address specific business problems and needs:
Rapid Deployment Pack – an automated solution for multi-server deployment and
provisioning, enabling companies to quickly and easily adapt to changing
business demands.
Workload Management Pack – provides easier management of complex
environments, improving overall server utilization and enabling Windows® 2000
customers for the first time to confidently deploy multiple applications on a single
multiprocessor ProLiant Server.
Performance Management Pack – a performance management solution that
identifies and explains hardware performance bottlenecks on ProLiant servers and
attached options enabling users to better utilize their valuable resources.
or the various ProLiant Essentials Value Pack product QuickSpecs for more
.
http://www.hp.com/servers/manage.
.
Industry Standard
Industry Standard
Industry StandardIndustry Standard
Compliance
Compliance
ComplianceCompliance
ACPI V1.0B Compliant
PCI 2.2 Compliant
PXE Support
WOL Support
PCI-X 1.0 Compliant
Novell Certified
Microsoft® Logo certifications
DA - 11430 Worldwide — Version 38 — February 13, 2004
Insight Manager 7
HP Systems Insight Manager
Redundant ROM
System Firmware Update
ROMPaq
Remote Insight Lights-Out Edition II (optional)
ProLiant RBSU (ROM-Based Setup Utility)
Automatic Server Recovery-2 (ASR-2)
Drive Parameter Tracking (with Smart Array Controller)
Dynamic Sector Repairing (with Smart Array Controller)
Pre-Failure Warranty (covers processors, memory and hard drives)
Power-on password
Setup password
Diskette boot control
Parallel and serial interface control
Disk configuration lock
Power switch security
Tower models ship standard with country specific, lowline NEMA power cords.
Rack models ship standard with an IEC cable. Rack models for some countries also include a NEMA cord.
Most redundant power supply options ship with country specific power cords with the exception of the IEC redundant power
supply (P/N 283655-B21) which ships with an IEC cable only.
HP ProLiant ML350 Generation 3
HP ProLiant ML350 Generation 3
HP ProLiant ML350 Generation 3HP ProLiant ML350 Generation 3
Power Supply
Power Supply
Power SupplyPower Supply
System Fans
System Fans
System FansSystem Fans
Required Cabling
Required Cabling
Required CablingRequired Cabling
OS Support
OS Support
OS SupportOS Support
500 Watts, Power Factor Correction (PFC), Hot Plug 100 to 240 VAC Rated Input Voltage (Auto-sensing), CE Mark
Compliant
Optional 2nd power supply for hot-pluggable 1 + 1 redundancy.
2 fans ship standard, 2 fans total supported (does not include power supply fans)
For required cabling information, refer to the HP Web site at
Microsoft Windows NT® Server 4.0 and Terminal Server 4.0
Microsoft BackOffice Small Business Server 2000
Microsoft Windows 2000 Server and Advanced Server
Windows Server 2003
Novell NetWare 5.1, 6.0
Novell NetWare Small Business Suite 6.0
SCO OpenServer 5.0.6a
SCO OpenUnix® 8 SCO UnixWare® 7.1.1
IBM OS/2 Warp Server for e-business
LINUX (Red Hat, 2.1 Advanced Server, Red Hat 8.0 and Red Hat 7.3, SuSE, SLES7, UnitedLinux 1.0)
For a more complete and up-to-date listing of supported OSs and versions, please visit our OS Support Matrix at:
Optional hardware may be required to support some operating systems.
For an up-to-date listing of the latest drivers available for the ProLiant ML350, please see:
http://www.hp.com/servers/proliantML350
.
.
.
DA - 11430 Worldwide — Version 38 — February 13, 2004
Rack 10000 series Cabinets
The increasing power of new high-performance processor technology requires increased cooling efficiency for rackmounted servers. The 10000 Series Racks provide enhanced airflow for maximum cooling, allowing these racks to
be fully loaded with servers using the latest processors.
CAUTION:
CAUTION:
CAUTION: CAUTION:
prevent damage to the equipment:
HP ProLiant ML350 Generation 3
HP ProLiant ML350 Generation 3
HP ProLiant ML350 Generation 3HP ProLiant ML350 Generation 3
If a third-party rack is used, observe the following additional requirements to ensure adequate airflow and to
Installation of Server into
Installation of Server into
Installation of Server intoInstallation of Server into
Telco Racks
Telco Racks
Telco RacksTelco Racks
HP Factory Express
HP Factory Express
HP Factory ExpressHP Factory Express
Capabilities
Capabilities
CapabilitiesCapabilities
Service and Support
Service and Support
Service and SupportService and Support
Front and rear doors:
square inches (5,350 sq cm) of hole evenly distributed from top to bottom to permit adequate airflow
(equivalent to the required 64 percent open area for ventilation).
Side:
The clearance between the installed rack component and the side panels of the rack must be a
minimum of 2.75 inches (7 cm).
CAUTION:
CAUTION:
CAUTION: CAUTION:
ensures proper airflow. Using a rack without blanking panels results in improper cooling that can lead to thermal damage.
NOTE:
NOTE:
NOTE: NOTE:
server, or to the server documentation located in the Support section at the following URL:
http://www5.hp.com/servers/proliantml350
ML350 G3 rack model support: Support for all 2-post Telco racks requires the use of the rack kit and an additional option
kit from Rack Solutions.
HP Factory Express gives you the flexibility to choose from a full menu of factory capabilities all in one manufacturing
facility, in one process, with one touch giving you full control and access to HP's World class manufacturing facility
anytime. This approach provides you the speed to deploy your IT needs, with total quality assurance, reliability, and
predictability to lower your total cost of ownership by letting HP install, rack, and customize your software and hardware
options for you.
HP Services provides a three-year, limited warranty, including Pre-Failure Warranty (coverage of hard drives, memory and
processors) fully supported by a worldwide network of resellers and service providers and lifetime toll-free 7 x 24 hardware
technical phone support. In addition, available service offerings include:
NOTE:
NOTE:
NOTE: NOTE:
Always use blanking panels to fill all remaining empty front panel U-spaces in the rack. This arrangement
For additional information, refer to the Setup and Installation Guide or the Documentation CD provided with the
http://www.racksolutions.com/hp
Limited Warranty includes 3 year Parts, 3 year Labor, 3-year on-site support.
If your 42U server rack includes closing front and rear doors, you must allow 830
.
.
A full range of HP Care Pack packaged hardware and software services:
Installation and start up
Extended coverage hours and enhanced response times
System management and performance services
Availability and recovery services
NOTE:
NOTE:
For more information, visit http://www.hp.com/services/carepack
NOTE:NOTE:
Please see the following URL regarding Warranty Information For Your HP Products:
Tower Code KeyTower Code Key
U.S. EnglishU.S. English
Australia
UK
Germany
France
JapanJapan
APDAPD
EuropeEurope
PRCPRC
Rack Code Key
Rack Code Key
Rack Code KeyRack Code Key
N/A
N/A
N/A
N/A
DA - 11430 Worldwide — Version 38 — February 13, 2004
Page 10
QuickSpecs
Options
ProLiant ML350 G3
ProLiant ML350 G3
ProLiant ML350 G3ProLiant ML350 G3
Unique Options
Unique Options
Unique OptionsUnique Options
Hot Plug Redundant Power Supply Option Kit (NA, LA)
Hot Plug Redundant Power Supply Option Kit (AUST)
Hot Plug Redundant Power Supply Option Kit (EURO)
Hot Plug Redundant Power Supply Option Kit (UK)
Hot Plug Redundant Power Supply Option Kit (Japan)
Hot Plug Redundant Power Supply Option Kit (cable)
NOTE:
NOTE:
NOTE: NOTE:
if connecting to PDU/UPS that supports IEC cables. All other SKUs contain country specific power
cables.
Intel Xeon 2.80 GHz-512KB Processor Option Kit
NOTE:
NOTE:
NOTE: NOTE:
533 MHz front side bus only. This kit cannot be used in 400 MHz front side bus systems such as those
with 2.4 GHz, 2.2GHz or 2.0 GHz processors.
Intel Xeon 2.40 GHz-512KB Processor Option Kit
NOTE:
NOTE:
NOTE: NOTE:
Intel Xeon 2.20 GHz-512KB Processor Option Kit
NOTE:
NOTE:
NOTE: NOTE:
Intel Xeon 2.0 GHz-512KB Processor Option Kit
NOTE:
NOTE:
NOTE: NOTE:
ProLiant ML350 G3 Tower to Rack Conversion Kit
PN 283655-B21 SKU contains the 2nd power supply with an IEC power cable. Only purchase
The 2.8 GHz processor option kit (PN 314763-B21) supports ProLiant ML350 G3 systems with
This processor option kit (PN 257913-B21) supports the ProLiant ML350 G3 servers.
This processor option kit (PN 283702-B21) supports the ProLiant ML350 G3 servers.
This processor option kit (PN 283701-B21) supports the ProLiant ML350 G3 servers.
HP ProLiant ML350 Generation 3
HP ProLiant ML350 Generation 3
HP ProLiant ML350 Generation 3HP ProLiant ML350 Generation 3
ProLiant EssentialsProLiant Essentials
Value Pack Software
Value Pack Software
Value Pack SoftwareValue Pack Software
HP NetServer Transition
HP NetServer Transition
HP NetServer TransitionHP NetServer Transition
Services
Services
ServicesServices
Rapid Deployment Pack, 1 User, V1.x
NOTE
NOTE
: This license allows 1 server to be managed and deployed via the Deployment Server.
NOTENOTE
Rapid Deployment Pack, 1 User, V1.x (Japan)
NOTE:
NOTE:
NOTE: NOTE:
Rapid Deployment Pack, 10 Users, V1.x
NOTE
NOTE
NOTENOTE
Rapid Deployment Pack, 10 Users, V1.x (Japan)
NOTE
NOTE
NOTENOTE
Flexible Quantity License Kit
License-Only - for use with a Master License Agreement
ProLiant Essentials Workload Management Pack 2.0 (Featuring Compaq Resource Partitioning
Manager version 2.0)
ProLiant Essentials Performance Management Pack Flexible License
NOTE:
NOTE:
NOTE: NOTE:
Refer to
product QuickSpecs for more information.
NOTE:
NOTE:
NOTE: NOTE:
http://www.hp.com/servers/proliantessentials
HP NetServer to ProLiant integration and assessment service
NOTE:
NOTE:
NOTE: NOTE:
helps maximize customer's ability to add ProLiant platforms into their current environment.
HP TopTools to Insight Manager 7 installation and startup service
NOTE:
NOTE:
NOTE: NOTE:
will also re-create, as closely as possible, the views and reports from the customer's current TopTools
configuration. This service assures a smooth transition to the ProLiant Essentials software.
HP NetServer to ProLiant Essentials Rapid Deployment Pack installation and startup service
NOTE:
NOTE:
NOTE: NOTE:
image to a maximum of 250 systems in the production environment. This service helps to assure
successful system deployment.
This license allows 1 server to be managed and deployed via the Deployment Server.
: This license allows 10 servers to be managed and deployed via the Deployment Server.
: This license allows 10 servers to be managed and deployed via the Deployment Server.
Flexible and volume quantity license kits are available for ProLiant Essentials Value Packs.
http://www.hp.com/servers/proliantessentials
For more information regarding ProLiant Essentials Software, please see the following URL:
HP identifies current levels of NetServer support, services, and management. This service
Provides on-site review, installation and configuration services for Insight Manager 7. HP
Install and configure Rapid Deployment Pack in a test environment, then deploy a server
or the various ProLiant Essentials Value Pack
.
267196-B21
267196-291
269817-B21
269817-291
302127-B21
302128-B21
303284-B21
306697-B21
304164-002
304163-002
304162-002
DA - 11430 Worldwide — Version 38 — February 13, 2004
Page 11
QuickSpecs
Options
Processors
Processors
ProcessorsProcessors
Intel Xeon 3.06 GHz-512KB Processor Option Kit
NOTE:
NOTE:
The 3.06 GHz processor option kit (PN 257916-B21) supports ProLiant ML350 G3 systems
NOTE:NOTE:
with 533 MHz front side bus only. This kit cannot be used in 400 MHz front side bus systems such as
those with 2.4 GHz, 2.2 GHz or 2.0 GHz processors.
Intel Xeon 2.80 GHz-512KB Processor Option Kit
NOTE:
NOTE:
NOTE: NOTE:
with 533 MHz front side bus only. This kit cannot be used in 400 MHz front side bus systems such as
those with 2.4 GHz, 2.2 GHz or 2.0 GHz processors.
Intel Xeon 2.40 GHz-512KB Processor Option Kit
NOTE:
NOTE:
NOTE: NOTE:
only. This kit (PN 257913-B21) cannot be used in 533 MHz front side bus systems such as the 2.8
GHz systems.
Intel Xeon 2.20 GHz-512KB Processor Option Kit
NOTE:
NOTE:
NOTE: NOTE:
only. This kit (PN 283702-B21) cannot be used in 533 MHz front side bus systems such as the 2.8
GHz systems.
Intel Xeon 2.0 GHz-512KB Processor Option Kit
NOTE:
NOTE:
NOTE: NOTE:
only. This kit (PN 283701-B21) cannot be used in 533 MHz front side bus systems such as the 2.8
GHz systems.
The 2.80 GHz processor option kit (PN 314763-B21) supports ProLiant ML350 G3 systems
This processor option kit supports ProLiant ML350 G3 servers with 400 MHz front side bus
This processor option kit supports ProLiant ML350 G3 servers with 400 MHz front side bus
This processor option kit supports ProLiant ML350 G3 servers with 400 MHz front side bus
HP ProLiant ML350 Generation 3
HP ProLiant ML350 Generation 3
HP ProLiant ML350 Generation 3HP ProLiant ML350 Generation 3
257916-B21
314763-B21
257913-B21
283702-B21
283701-B21
Memory
Memory
MemoryMemory
Internal Storage
Internal Storage
Internal StorageInternal Storage
Optical Drives
Optical Drives
Optical DrivesOptical Drives
(DIMMs)
NOTE:
NOTE:
NOTE: NOTE:
models ship standard with one 256MB DIMM or one 512MB DIMM (Array models). For best
performance automatically invoke interleaving by populating memory in identical pairs. If 1GB of
total memory is desired add three 256MB DIMMs to the base configuration. If 1.5GB of memory is
desired add one 256MB DIMM (to pair with the standard DIMM) and two 512MB DIMMs.
Interleaving and installation of memory in pairs is not required. Add any combination of memory
DIMMs below to operate in non-interleaved mode.
NOTE:
NOTE:
NOTE: NOTE:
128MB of Advanced ECC PC2100 DDR SDRAM DIMM Memory Kit (1 x 128 MB)
256MB of Advanced ECC PC2100 DDR SDRAM DIMM Memory Kit (1 x 256 MB)
512MB of Advanced ECC PC2100 DDR SDRAM DIMM Memory Kit (1 x 512 MB)
1024MB of Advanced ECC PC2100 DDR SDRAM DIMM Memory Kit (1 x 1024 MB)
2048MB of Advanced ECC PC2100 DDR SDRAM DIMM Memory Kit (1 x 2048 MB)
ML3xx Two Bay Hot Plug SCSI Drive Cage
NOTE:
NOTE:
NOTE: NOTE:
installs in two available removable media bays.
CD-RW/DVD-ROM Combo Drive Option Kit
NOTE:
NOTE:
NOTE:NOTE:
placed in the removable media bay, it requires the 2-Device IDE cable (PN 305381-B21).
The ML350 G3 supports both interleaved and non-interleaved memory configurations. Base
Each SDRAM Memory kit contains one (1) DIMM.
The drive cage option kit (PN 244059-B21) has one 1” drive bay and one 1.6” drive bay. It
The DVD-ROM drive is supported in the CD-ROM bay and in the removable media bay. If
NOTE: NOTE:
HP StorageWorks Modular Smart Array 1000 and the HP StorageWorks Modular Smart Array 500.
256MB DDR, Battery-Backed Cache Upgrade Kit for SA-6400
NOTE:
NOTE:
NOTE: NOTE:
controller only.
Ultra320 Expansion Module for SA-6402
64-Bit/66-MHz Dual Channel Wide Ultra3 SCSI Adapter, Alternate OS
64-Bit/133Mhz Dual Channel Ultra320 SCSI Adapter
NOTE:
NOTE:
NOTE: NOTE:
such as PCI Bus, PCI Peak Data Transfer Rate, SCSI Protocols supported, SCSI Peak Data Transfer
Rate, Channels, SCSI Ports, Drives supported, Cache, RAID support, and additional information: