HP L1950g User Manual
QuickSpecs
Monitor
Technical Specifications
Overview
HP L1950g 19-inch LCD Monitor
HP L1950g 19-inch LCD
1. Menu/Select 4. Power LED
2. “-“ OSD Navigation/Auto Adjust 5. Power
3. “+” OSD Navigation/Input Select
Models
Part Number: KR145AA and KR145A2 (TAA compliant/US only)
Worldwide — Version 1 — June 13, 2008 Page 1
QuickSpecs
Monitor
Technical Specifications
Panel
Video/Other
Inputs
Signal Interface/
Performance
Type Active matrix, thin film transistor (TFT)
Viewable Image Area
(diagonal)
Screen Opening (WxH) 14.9 x 11.9 in (37.8 x 30.3 cm)
Viewing Angle (typical)* Up to 160° horizontal/160° vertical (10:1 contrast ratio)
Brightness (typical)* 300 nits (cd/m2)
Contrast Ratio (typical)* 800:1
Response Time (typical)* 5 ms (rise + fall)
Pixel Pitch 0.294 mm
Backlight Lamp Life (to half
brightness)
* All performance specifications represent the typical specifications provided by HP's component
manufacturers; actual performance may vary either higher or lower.
Plug and Play Yes (supports VESA DDC2B and DDC/CI; PC2001 compliant)
USB 2.0 Hub Self-powered; two ports (cable included)
Input Signal Two connectors: one 15-pin mini D-sub analog VGA and one DVI-D
Input Impedance 75 ohms ± 2%
Sync Input Separate sync (HSYNC/VSYNC)
Video Cable 15-pin D-sub mini connector; detached
Video Cable Length 70.9 in/1.8 m; detached
Horizontal Frequency 24 to 83 kHz
Vertical Frequency 50 to 77 Hz
Max Resolution (Analog) 1280 x 1024 @ 75 Hz
Max Resolution (Digital) 1280 x 1024 @ 75 Hz
Preset VESA Modes (non-
interlaced)
Preset SUN Mode 1152 x 900 @ 76 Hz
Fail Safe Mode Yes (limits out of range signal messages)
Max Pixel Clock Speed 140 MHz
HP L1950g 19-inch LCD
19 in (48.25 cm)
40K hours
1280 x 1024 @ 60 Hz (analog) Native Resolution
1280 x 1024 @ 60 Hz (digital)
640 x 480 @ 60 Hz, 72 Hz, 75 Hz
720 x 400 @ 70 Hz
800 x 600 @ 60 Hz, 72 Hz, 75 Hz
1024 x 768 @ 60 Hz, 70 Hz, 75 Hz
1280 x 1024 @ 60 Hz, 75 Hz
832 x 624 @ 75 Hz Preset MAC Mode
1152 x 870 @75 Hz
Worldwide — Version 1 — June 13, 2008 Page 2
Loading...