Page 1
QuickSpecs
Overview
HP L1906i Flat Panel Monitor
(thin client not included)
1.
Menu selection
2.
Menu "-" selector button
3.
Menu "+" selector button
4.
Power LED
5.
Power button
6.
Integrated HP Quick Release
7.
Mounting bracket security screw installation points
8.
Power supply support and rear cable management loops
Models
GJ099AA
Introduction
The HP L1906i Flat Panel Monitor allows you to easily attach an HP Compaq dc7800 Ultra-slim Desktop PC or HP Thin
Client onto the back of the monitor stand for the convenience of an "all-in-one" form factor.
DA - 12762 Worldwide QuickSpecs — Version 2 — 9.5.2007
Page 1
Page 2
QuickSpecs
HP L1906i Flat Panel Monitor
Overview
Key features and benefits
Integrates your HP Compaq dc7800 Ultra-slim Desktop PC or HP Thin Client and an HP L1906i Flat Panel Monitor,
allowing you to conveniently put the entire compact system configuration at your fingertips, saving valuable desktop
space and making the most efficient use of space-constrained office environments
Cable management solution keeps the PC and monitor cables together and hidden from view
Vertical height adjustment allows the monitor to be adjusted for maximum user comfort
Entire unit swivels left to right with the touch of a finger which allows easy adjustability to accommodate multiple
viewers
Monitor mounting plate supports the attachment of either the HP Compaq dc7800 USDT chassis or HP Thin Client
DA - 12762 Worldwide QuickSpecs — Version 2 — 9.5.2007
Page 2
Page 3
QuickSpecs
Technical Specifications
HP L1906i Flat Panel Monitor
Panel
On Screen Display
(OSD) Controls
Signal Interface/
Performance
Video Input
Type
Viewable Image Area
(diagonal)
Screen Opening
(W x H)
Viewing Angle
Brightness
Contrast Ratio
Response Rate
Pixel Pitch
* All performance specifications represent the typical specifications provided by HP's component
manufacturers; actual performance may vary either higher or lower.
Buttons or Switches
Languages
User Controls
Horizontal Frequency
Vertical Frequency
Native Resolution
Maximum Resolution
(Digital)
Preset VESA Graphic
Modes
Maximum Pixel Clock
Speed
User Programmable
Modes
Anti-Glare
Anti-Static
Default Color
Temperature
Plug and Play
Input Signal
Input Impedance
Sync Input
Video Cable
(non-interlaced)
(typical)*140 degrees horizontal/130 degrees vertical (10:1 minimum contrast
(typical)
(typical)*500:1
19-inch Active Matrix TFT (thin film transistor)
19 in (48.26 cm)
14.8 x 11.9 in (37.6 x 30.1 cm)
ratio)
*
270 nits (cd/m2)
5 ms (rise and fall)
0.294 mm
3-button OSD (menu, minus, plus); power on/off
English, French, German, Spanish, Italian, Dutch, Simplified Chinese
Image Control (auto, horizontal, vertical)
Positioning (vertical and horizontal)
Color Temperature (6500k, 9300k, Custom)
Brightness
Contrast
Clock, Clock Phase
Monitor Management (power saver, sleep)
Factory Reset
30 to 83 kHz
50 to 76 Hz
1280 x 1024 @ 60 Hz (recommended)
N/A
1280 x 1024 @ 60 Hz and 75 Hz
1024 x 768 @ 60 Hz, 70 Hz, and 75 Hz
1152 x 870 @ 75 Hz (Mac)
1152 x 900 @ 76 Hz (Sun)
832 x 624 @ 75 Hz (Mac)
800 x 600 @ 60 Hz, 72 Hz, and 75 Hz
720 x 400 @ 70 Hz
640 x 480 @ 60 Hz, 72 Hz, and 75 Hz
140 MHz
Yes, 10
Yes
Yes
6500 degrees Kelvin
Yes
15 pin D-sub (Analog VGA)
75 ohms (2 % value change allowed)
TTL separate synch
Detachable 15-pin D-sub mini connector
DA - 12762 Worldwide QuickSpecs — Version 2 — 9.5.2007
Page 3
Page 4
QuickSpecs
Technical Specifications
HP L1906i Flat Panel Monitor
Power
Mechanical
Environmental
Environmental Data
Video Cable Length
Input Voltage
Nominal Current
Frequency
Typical Power
Consumption
Maximum
Power Saving
Power Cable Length
Dimensions
Weight
Tilt Range
Swivel Range
Height Adjustable
Base and Stand
Temperature –
Operating
Temperature –
Non-operating
Humidity – Operating
Humidity –
Non-operating
Altitude – Operating
Altitude –
Non-operating
Eco-Label
Certifications and
Declarations
(H x W x D)
27 in (68.6 cm)
100 ~ 240 VAC
< 0.50 Ampere
50 ~ 60 Hz
33 watts
< 37 watts
< 2 watts
74.8 in (1.9 m); detachable
Unpacked with stand
Display Head only
Packaged
Unpacked
Packaged
-3 to +20 degrees vertical tilt
-180° to + 180°
Yes, range:5.1 in (13 cm)
Detachable, attaches to monitor using HP Quick Release
50° to 95° F (10° to 35° C) non-condensing
-4° to 140° F (-20° to 60° C)
20% to 80% non-condensing
5% to 90%
0 to 12,000 ft (0 to 3,658 m)
0 to 40,000 ft (0 to 12,100 m)
This product has received or is in the process of being certified to the
following approvals and may be labeled with one or more of these
marks:
20.1 x 16.6 x 10.3 in (51.1 x 42.2 x 26.2 cm)
14.3 x 16.6 x 2.3 in (36.2 x 42.2 x 5.9 cm)
20.2 x 17.9 x 13.7 in (51.4 x 45.5 x 34.8 cm)
16.7 lb (7.6 kg)
21.4 lb (9.7 kg)
ENERGY STAR®
IT ECO declaration
TCO 03
Energy Consumption
(in accordance with US
Energy Star test method)
Normal Operation
Sleep
Off
Heat Dissipation*
Normal Operation
Sleep
Off
* Heat dissipation is calculated based on the measured watts, assuming the service level is
attained for one hour.
DA - 12762 Worldwide QuickSpecs — Version 2 — 9.5.2007
AC Input Voltage at
100 VAC +/- 5 VAC, 50
Hz +/- 3 Hz
31.2 watts
2.65 watts 2.32 watts 2.45 watts
0.58 watts 0.37 watts 0.40 watts
100 VAC, 50 Hz 115 VAC, 60 Hz 230 VAC, 50 Hz
106.70 BTU/hr 106.02 BTU/hr 104.99 BTU/hr
9.06 BTU/hr 7.93 BTU/hr 8.38 BTU/hr
1.98 BTU/hr 1.27 BTU/hr 1.37 BTU/hr
AC Input Voltage at
115 VAC +/- 5 VAC, 60
Hz +/- 3 Hz
31 watts
AC Input Voltage at
230 VAC +/- 5 VAC, 50
Hz +/- 3 Hz
30.7 watts
Page 4
Page 5
QuickSpecs
Technical Specifications
HP L1906i Flat Panel Monitor
Ergonomics
Additional Information
Material Usage
The monitor meets the ergonomic requirement of EN-ISO 13406-2 for
flat panel displays.
This product is in compliance with the Restrictions of Hazardous
Substances (RoHS) Directive, 2002/95/EC.
This HP product is designed to comply with the Waste Electrical and
Electronic Equipment (WEEE) Directive, 2002/96/EC.
Plastics parts weighing over 25 grams used in the product are marked
per ISO 11469 and ISO1043.
Display meets the requirement for low frequency electromagnetic fields
per MPR-II, TCO, and prEN50279 A/B/C.
Packaging Materials
Corrugated Carton – 0.800 kg
Bag LDPE – 0.037 kg
Film PP – 0.190 kg
This product does not contain any of the following substances in excess
of regulatory limits (refer to the HP General Specification for the
Environment at:
http://www.hp.com/hpinfo/globalcitizenship/environment/
supplychain/gen_specifications.html
Packaging
Asbestos
Certain Azo Colorants
Certain Brominated Flame Retardants – may not be used as
flame retardants in plastics
Cadmium
Chlorinated Hydrocarbons
Chlorinated Paraffins
Formaldehyde
Halogenated Diphenyl Methanes
Lead carbonates and sulfates
Lead and Lead compounds
Mercuric Oxide Batteries
Nickel – finishes must not be used on the external surface
designed to be frequently handled or carried by the user.
Ozone Depleting Substances
Polybrominated Biphenyls (PBBs)
Polybrominated Biphenyl Ethers (PBBEs)
Polybrominated Biphenyl Oxides (PBBOs)
Polychlorinated Biphenyl (PCB)
Polychlorinated Terphenyls (PCT)
Polyvinyl Chloride (PVC) – except for wires and cables, and
certain retail packaging has been voluntarily removed from most
applications.
Radioactive Substances
Tributyl Tin (TBT), Triphenyl Tin (TPT), Tributyl Tin Oxide (TBTO)
HP follows these guidelines to decrease the environmental impact of
product packaging:
Eliminate the use of heavy metals such as lead, chromium,
mercury and cadmium in packaging materials.
Eliminate the use of ozone-depleting substances (ODS) in
packaging materials.
Design packaging materials for ease of disassembly.
DA - 12762 Worldwide QuickSpecs — Version 2 — 9.5.2007
Page 5
Page 6
QuickSpecs
Technical Specifications
End-of-life
Management and
Recycling
Hewlett-Packard
Corporate
Environmental
Information
Accessories Included
Options
Other
Exclusive Integrated Work Center VGA video cable, HP dc7800 Ultra-slim Desktop cable cover
(rear port cover), PC mounting bracket, HP Quick Release, documentation kit, and User CD
HP Flat Panel Speaker
Bar – Part number:
EE418AA
Software
User Guide Languages
Warranty Languages
Color
VESA External
Mounting
Kensington Lock-ready
HP L1906i Flat Panel Monitor
Maximize the use of post-consumer recycled content materials in
packaging materials.
Use readily recyclable packaging materials such as paper and
corrugated materials.
Reduce size and weight of packages to improve transportation
fuel efficiency.
Plastic packaging materials are marked according to ISO 11469
and DIN 6120 standards.
Hewlett-Packard offers end-of-life HP product return and recycling
programs in many geographic areas. To recycle your product, please
go to:
http://www.hp.com/recycle
office. Products returned to HP will be recycled, recovered or disposed
of in a responsible manner.
For more information about HP's commitment to the environment:
Global Citizenship Report
http://www.hp.com/hpinfo/globalcitizenship/gcreport/index.html
Eco-label certifications
http://www.hp.com/hpinfo/globalcitizenship/environment/
productdesign/ecolabels.html
ISO 14001 certificates:
http://www.hp.com/hpinfo/globalcitizenship/environment/
operations/envmanagement.html
Powered directly by the connected PC, the Speaker Bar seamlessly
attaches to the monitor's lower bezel to bring full audio support to select
HP flat panel monitors. Features include dual speakers with full sound
range and an external jack for headphones. Sold separately. For more
information, refer to the HP Flat Panel Speaker Bar QuickSpec.
HP Display LiteSaver feature allows you to schedule Sleep mode at
preset times to help protect the monitor against image retention,
drastically lower power consumption and energy costs, and extend the
lifespan of the monitor.
HP Display Assistant is a software utility that allows monitor adjustment
and color calibration using the Display Data Channel Command
Interface (DDC/CI) protocol of the connected PC.
English, Brazilian Portuguese, French, LA Spanish, Korean, Simplified
Chinese, Traditional Chinese, Japanese, Danish, Dutch, Finnish,
German, Italian, Norwegian, Swedish, Greek, Polish, Russian,
Slovenian, Turkish
Americas
LA
EMEA
Asia/Pacific
Carbonite/Silver
Yes (Standard 4 hole pattern, 100 mm on monitor; two additional 100
mm patterns on the mounting bracket))
Yes, on monitor only
English, Canadian French
Spanish, Brazilian Portuguese
English, Danish, Dutch, Finnish, European
French, German, Italian, Norwegian, Castilian
Spanish, Swedish
English, Bahasa, S. Chinese, T. Chinese,
Korean, Japanese, Chinese
or contact your nearest HP sales
DA - 12762 Worldwide QuickSpecs — Version 2 — 9.5.2007
Page 6
Page 7
QuickSpecs
Technical Specifications
HP L1906i Flat Panel Monitor
Certification and
Compliance
Compatibility
Service and Warranty
ISO 13406-2 pixel defect guidelines, MPR-II, CISPR, VCCI, CSA (Canada), ACA (Australia), TUV
and GS Mark (German ergonomic), BSMI (Taiwan), CCC (China), MIC (South Korea), NOM
(Mexico), Eastern European approvals, CE Marking, FCC approval, ENERGY STAR® Qualified,
TCO '03 (emissions, ergonomics, environment), Microsoft® Windows® certified (Microsoft®
Windows® 2000, Microsoft Windows XP, and Windows Vista®), UL listed, GOST (Russia), SASO
(Saudi Arabia)
Compatible with platforms using the VESA standard video modes. Recommended for use with HP
products.
Three years parts, labor, and on-site service. 24-hour, 90-day, toll-free technical support.
Replacement options may include second business day on-site service, or next business day
direct replacement, at HP's sole discretion*. With direct replacement, HP will ship a replacement
display product directly to you. Using the prepaid shipping labels provided, return your failed
display to HP in the same packaging as the replacement. Certain restrictions and exclusions
apply. For details see your product warranty or contact HP Customer Support.
* Service levels and response times for HP Care Packs may vary depending on your geographic
location. Restrictions and limitations apply. For details, visit
http://www.hp.com/go/carepack
.
DA - 12762 Worldwide QuickSpecs — Version 2 — 9.5.2007
Page 7
Page 8
QuickSpecs
HP L1906i Flat Panel Monitor
Overview - HP Compaq dc7800 Series Integrated Work Center Stand (included with L1906i)
HP Compaq dc7800 Series Integrated Work Center Stand (included with L1906i)
1.
HP Quick Release security screw
2.
Integrated HP Quick Release
3.
Height-adjustable monitor mount
4.
Integrated cable management slots
5.
Mounting bracket security screw installation points
6.
PC and thin client mounting bracket (unique four-hole
pattern for thin clients
7.
PC and thin client mounting bracket (unique four-hole
pattern for PCs
8.
Power supply support and rear cable management loops
DA - 12762 Worldwide QuickSpecs — Version 2 — 9.5.2007
Page 8
Page 9
QuickSpecs
HP L1906i Flat Panel Monitor
Technical Specifications - HP Compaq dc7800 Series Integrated Work Center Stand
Mechanical
Other
Supported weight
capacity
Tilt range
Swivel range
Height adjustable
Pivot rotation
Dimensions
(Unpackaged)
Weight
Accessories included
User guide languages
Warranty languages
Color
VESA external
mounting
Option kit contents
The Integrated Work Center Stand has been designed to support the weight of a 17-, 19-, or 19inch wide format monitor only.
-3 to +20 degrees vertical tilt
-180° to + 180°
Yes, range: 5.3 in (13.5 cm)
No
Cable management slot
in:
Cable management slot
out:
Unpackaged
Exclusive Integrated Work Center VGA video cable, HP dc7800 Ultraslim Desktop cable cover (rear port cover), PC mounting bracket, HP
Quick Release, documentation kit, and User CD
English, French, German, Spanish, Italian, Dutch, Brazilian Portuguese,
Danish, Finnish, Greek, Japanese, Korean, Latin American Spanish,
Norwegian, Polish, Russian, Slovenian, Turkish, Swedish, Traditional
Chinese, Simplified Chinese
English, German, French, Italian, Spanish and Japanese
Carbonite
Yes (Standard 4 hole pattern, two separate 100 mm patterns on the
mounting bracket)
Integrated Work Center Stand and PC mounting bracket, Integrated
Work Center VGA video cable, HP Compaq dc7800 Ultra-slim Desktop
cable cover (rear cover), Quick Release bracket (to attach to back of
monitor)
16.5 x 14.5 x 10.25 in (41.91 x 36.83 x 26.06
cm)
16.5 x 14.5 x 12.25 in (41.91 x 36.83 x 31.12
cm)
6.12 lbs (2.78 kg)
DA - 12762 Worldwide QuickSpecs — Version 2 — 9.5.2007
Page 9
Page 10
QuickSpecs
Overview - HP Flat Panel Monitor Quick Release (included)
HP Flat Panel Monitor Quick Release (included)
HP L1906i Flat Panel Monitor
1.
Release/locking
2.
Four 100 mm VESA mount screw
holes
3.
Mounting holes for attachment to
back of monitor stands
1.
Four 100 mm VESA mount screw
holes
1.
2.
Locking pin screw
Locking pin hole on release/locking
arm
Introduction
The HP Quick Release, which ships standard with the HP LP1906i Flat Panel Monitor, is an easy to use, 100 mm VESAcompliant, flat panel monitor mounting solution that allows you to quickly and securely attach a flat panel monitor to a variety
of stands, brackets, arms or wall mounts. HP Quick Release can also be used for mounting any combination of devices that
are compatible with the 100 mm VESA Flat Display Mounting Interface Standard. The failsafe "Sure-Lock" mechanism snaps
the monitor (or mounted device) securely in place, and can be further secured with a theft-deterrent security screw.
DA - 12762 Worldwide QuickSpecs — Version 2 — 9.5.2007
Page 10
Page 11
QuickSpecs
Technical Specifications - HP Flat Panel Monitor Quick Release
HP L1906i Flat Panel Monitor
Mechanical
Additional components
Color
NOTES
Supported weight
capacity
:
Dimensions
Weight
Eight 10 mm mounting screws (for attachment to VESA compliant monitor mounts)
Eight 15.5 mm mounting screws (for attachment to HP Compaq t5000 Thin Client products)
Four 20 mm mounting screws (for attachment to back of select HP flat panel monitor
stands)
One Quick Release "locking" screw
Carbonite
No HP monitors allow positioning of a thin client product between a monitor screen and its
1.
stand.
The Quick Release device is not to be used between a monitor screen and its stand unless
2.
provided that way from the factory.
Under no circumstances is the Quick Release device intended to be used in an orientation
3.
where the Release/Lock lever is oriented downward.
The HP Flat Panel Monitor Quick Release has been designed to support a maximum of up to 24
lbs (10.9 kg) depending upon the mounting configuration used. Please note this is a total weight
limit for all devices mounted, i.e. the combined weight of the monitor and a second device such as
an HP Compaq t5000 Series Thin Client cannot exceed 24 pounds. Because mounting surfaces
vary widely and the final mounting method and configuration may vary, mounting fasteners are not
supplied (other than the VESA-compliant screws). HP recommends that you consult with a
qualified engineering, architectural or construction professional to determine the appropriate type
and quantity of mounting fasteners required for your application and to ensure that your mounting
solution is properly installed to support applied loads.
(H x W x D)
Packaged:
Unpackaged:
Packaged:
Unpackaged:
7.8 x 6.25 x 1.5 in (19.8 x 15.9 x 3.8 cm)
6.3 x 5.2 x 0.65 in (16 x 13.2 x 1.65 cm)
1.1 lb (0.49 kg)
0.82 lb (0.37 kg)
© 2007 Hewlett-Packard Development Company, L.P.
Microsoft and Windows are trademarks or registered trademarks of Microsoft Corporation in the U.S. and other countries.
Windows Vista is either a registered trademark or trademark of Microsoft Corporation in the United States and/or other
countries. ENERGY STAR is a registered mark owned by the U.S. government. ENERGY STAR is a registered mark owned
by the U.S. government.
HP shall not be liable for technical or editorial errors or omissions contained herein. The information is provided as is without
warranty of any kind and is subject to change without notice. The warranties for HP products are set forth in the express
limited warranty statements accompanying such products. Nothing herein should be construed as constituting an additional
warranty. All performance specifications represent the typical specifications provided by HP's component manufacturers;
actual performance may vary either higher or lower.
DA - 12762 Worldwide QuickSpecs — Version 2 — 9.5.2007
Page 11
Loading...