HP L1706i, L1906i, L1908wi, L1906v User Manual
HP L1706i, L1906i, and L1908wi LCD Monitors
User Guide
© 2007, 2008 Hewlett-Packard Development
Company, L.P.
Microsoft, Windows, and Windows Vista are
either trademarks or registered trademarks
of Microsoft Corporation in the United States
and/or other countries.
All other product names mentioned herein
may be trademarks of their respective
companies.
Hewlett-Packard Company shall not be liable
for technical or editorial errors or omissions
contained herein or for incidental or
consequential damages in connection with
the furnishing, performance, or use of this
material. The information in this document is
provided “as is” without warranty of any kind,
including, but not limited to, the implied
warranties of merchantability and fitness for
a particular purpose, and is subject to
change without notice. The warranties for
Hewlett-Packard products are set forth in the
express limited warranty statements
accompanying such products. Nothing
herein should be construed as constituting
an additional warranty.
This document contains proprietary
information that is protected by copyright. No
part of this document may be photocopied,
reproduced, or translated to another
language without the prior written consent of
Hewlett-Packard Company.
Third Edition (January 2008)
Document Part Number: 448556-003
About This Guide
This guide provides information on setting up the monitor, installing drivers, using the on-screen display
menu, troubleshooting and technical specifications.
WARNING! Text set off in this manner indicates that failure to follow directions could result in bodily
harm or loss of life.
CAUTION: Text set off in this manner indicates that failure to follow directions could result in damage
to equipment or loss of information.
NOTE: Text set off in this manner provides important supplemental information.
iii
iv About This Guide
Table of contents
1 Product Features
HP LCD Monitors with Integrated Work Center .................................................................................... 1
2 Safety and Maintenance Guidelines
Important Safety Information ................................................................................................................ 3
Maintenance Guidelines ....................................................................................................................... 3
Cleaning the Monitor ............................................................................................................ 4
Shipping the Monitor ............................................................................................................ 4
3 Setting Up the Monitor
Installing the Monitor on the Stand ....................................................................................................... 5
Installing an HP Ultra-slim Desktop (USDT) on the Stand ................................................................... 7
Installing an HP Thin Client on the Stand ........................................................................................... 11
Adjusting the Monitor .......................................................................................................................... 15
Turning on the Monitor ....................................................................................................................... 16
Removing the Computer from the Stand ............................................................................................ 17
Removing the Monitor from the Stand ................................................................................................ 18
Monitor Mounting Alternatives ............................................................................................................ 18
Locating the Rating Labels ................................................................................................................. 19
4 Operating the Monitor
Software and Utilities .......................................................................................................................... 20
The Information File ........................................................................................................... 20
The Image Color Matching File .......................................................................................... 20
Installing the .INF and .ICM Files ....................................................................................................... 21
Installing from the CD ........................................................................................................ 21
Downloading from the Worldwide Web .............................................................................. 21
Front Panel Controls .......................................................................................................................... 22
Adjusting the Monitor Settings ............................................................................................................ 22
Using the On-Screen Display Menu .................................................................................. 22
OSD Menu Selections ....................................................................................... 23
Adjusting Screen Quality ................................................................................... 26
Optimizing Digital Conversion ........................................................................... 26
Using the HP Display Assistant Utility ............................................................................... 27
Identifying Monitor Conditions ............................................................................................................ 27
Sleep Timer Mode .............................................................................................................................. 28
HP Display LiteSaver ......................................................................................................................... 29
Installing the HP Display LiteSaver Software .................................................................... 29
v
sRGB Support .................................................................................................................................... 30
Changing the Color Temperature ...................................................................................... 30
Installing the sRGB ICM File for Microsoft Windows 2000 and Windows XP .................... 30
Installing the sRGB ICM File for Microsoft Windows Vista ................................................ 31
Appendix A Troubleshooting
Solving Common Problems ................................................................................................................ 32
Using the Worldwide Web .................................................................................................................. 33
Preparing to Call Technical Support ................................................................................................... 33
Appendix B Technical Specifications
L1706i Model ...................................................................................................................................... 34
L1906i Model ...................................................................................................................................... 35
L1908wi Model ................................................................................................................................... 36
Recognizing Preset Display Resolutions ............................................................................................ 37
L1706i and L1906i Models ................................................................................................. 37
L1908wi Model ................................................................................................................... 37
Entering User Modes .......................................................................................................................... 38
Energy Saver Feature ........................................................................................................................ 38
Appendix C Agency Regulatory Notices
Federal Communications Commission Notice ................................................................................... 39
Modifications ...................................................................................................................... 39
Cables ................................................................................................................................ 39
Declaration of Conformity for Products Marked with the FCC Logo (United States Only) ................. 39
Canadian Notice ................................................................................................................................. 40
Avis Canadien .................................................................................................................................... 40
European Union Regulatory Notice .................................................................................................... 40
German Ergonomics Notice ............................................................................................................... 41
Japanese Notice ................................................................................................................................. 41
Korean Notice ..................................................................................................................................... 41
Power Cord Set Requirements ........................................................................................................... 41
Japanese Power Cord Requirements ................................................................................ 41
Product Environmental Notices .......................................................................................................... 42
ENERGY STAR Compliance ............................................................................................. 42
Materials Disposal ............................................................................................................. 42
Disposal of Waste Equipment by Users in Private Household in the European
Union ................................................................................................................................. 42
Restriction of Hazardous Substances (RoHS) ................................................................... 43
Appendix D LCD Monitor Quality and Pixel Policy
vi
1 Product Features
HP LCD Monitors with Integrated Work Center
The flat panel monitors have an active matrix, thin-film transistor (TFT), liquid crystal display (LCD). The
monitor models include:
●
L1706i model, 17-inch (43.2 cm) viewable area display with 1280 x 1024 resolution, plus full-screen
support for lower resolutions
●
L1906i model, 19-inch (48.3 cm) viewable area display with 1280 x 1024 resolution, plus full-screen
support for lower resolutions
●
L1908wi model, 19-inch (48.3 cm) viewable area display with 1440 × 900 resolution, plus full-screen
support for lower resolutions; includes custom scaling for maximum image size while preserving
original aspect ratio
●
Wide viewing angle to allow viewing from a sitting or standing position, or moving side-to-side
●
Tilt, swivel, and height adjustment capabilities
●
Integrated Work Center stand that integrates the monitor with an HP Ultra-slim Desktop (USDT)
PC or Thin Client on a single stand for the convenience of an "all-in-one" form factor
●
HP Quick Release for flexible and easy monitor panel removal and mounting solutions
●
Power cable and VGA signal cable included
●
Accepts an optional mounted HP speaker bar
●
Plug and play capability if supported by the system
●
On-Screen Display (OSD) adjustments in several languages for easy setup and screen
optimization
●
Software and documentation CD that includes software, monitor drivers, an information file (INF),
Image Color Matching file (ICM), and product documentation
●
Energy Saver feature for Energy Star compliance
●
AssetControl (available with select models)
●
Compliant with the following regulated specifications:
◦
European Union CE Directives
◦
Swedish MPR II 1990
HP LCD Monitors with Integrated Work Center 1
◦
Swedish TCO Requirements
◦
Energy Star
2 Chapter 1 Product Features
2 Safety and Maintenance Guidelines
Important Safety Information
A power cord is included with the monitor. If another cord is used, use only a power source and
connection appropriate for this monitor. For information on the correct power cord set to use with the
monitor, refer to
Power Cord Set Requirements on page 41 in Appendix C.
WARNING! To reduce the risk of electric shock or damage to the equipment:
• Do not disable the power cord grounding feature. The grounding plug is an important safety feature.
• Plug the power cord into a grounded (earthed) electrical outlet that is easily accessible at all times.
• Disconnect power from the product by unplugging the power cord from the electrical outlet.
For your safety, do not place anything on power cords or cables. Arrange them so that no one may
accidentally step on or trip over them. Do not pull on a cord or cable. When unplugging from the electrical
outlet, grasp the cord by the plug.
To reduce the risk of serious injury, read the Safety and Comfort Guide. It describes proper workstation,
setup, posture, and health and work habits for computer users, and provides important electrical and
mechanical safety information. This guide is located on the Web at
http://www.hp.com/ergo and/or on
the documentation CD, if one is included with the monitor.
CAUTION: For the protection of the monitor, as well as the computer, connect all power cords for the
computer and its peripheral devices (such as a monitor, printer, scanner) to some form of surge
protection device such as a power strip or Uninterruptible Power Supply (UPS). Not all power strips
provide surge protection; the power strips must be specifically labeled as having this ability. Use a power
strip whose manufacturer offers a Damage Replacement Policy so you can replace the equipment, if
surge protection fails.
Maintenance Guidelines
To enhance the performance and extend the life of the monitor:
●
Do not open the monitor cabinet or attempt to service this product yourself. Adjust only those
controls that are covered in the operating instructions. If the monitor is not operating properly or
has been dropped or damaged, contact an authorized HP dealer, reseller, or service provider.
●
Use only a power source and connection appropriate for this monitor, as indicated on the label/
back plate of the monitor.
●
Be sure the total ampere rating of the products connected to the outlet does not exceed the current
rating of the electrical outlet, and the total ampere rating of the products connected to the cord does
Important Safety Information 3
not exceed the rating of the cord. Look on the power label to determine the ampere rating (AMPS
or A) for each device.
●
Install the monitor near an outlet that you can easily reach. Disconnect the monitor by grasping the
plug firmly and pulling it from the outlet. Never disconnect the monitor by pulling the cord.
●
Turn the monitor off when not in use. You can substantially increase the life expectancy of the
monitor by using a screen saver program and turning off the monitor when not in use.
●
Slots and openings in the cabinet are provided for ventilation. These openings must not be blocked
or covered. Never push objects of any kind into cabinet slots or other openings.
●
Do not drop the monitor or place it on an unstable surface.
●
Do not allow anything to rest on the power cord. Do not walk on the cord.
●
Keep the monitor in a well-ventilated area, away from excessive light, heat or moisture.
Cleaning the Monitor
1. Turn off the monitor and the computer.
2. Unplug the monitor from the wall outlet.
3. Clean the monitor plastics with a clean cloth dampened with water.
4. Clean the monitor screen with an antistatic screen cleaner.
CAUTION: Do not use benzene, thinner, ammonia, or any other volatile substances to clean the
monitor or the screen. These chemicals may damage the cabinet finish as well as the screen.
Shipping the Monitor
Keep the original packing box in a storage area. You may need it later if you move or ship the monitor.
4 Chapter 2 Safety and Maintenance Guidelines
3 Setting Up the Monitor
To set up the monitor, ensure that the power is turned off to the monitor, computer system, and other
attached devices, then follow the instructions below.
Installing the Monitor on the Stand
CAUTION: Do not touch the surface of the LCD panel. Pressure on the panel may cause non-
uniformity of color or disorientation of the liquid crystals. If this occurs the screen will not recover to its
normal condition.
1. Place the monitor panel face down on a dry, soft cloth and connect the VGA cable and power cable
to the monitor.
Figure 3-1 Connecting VGA and Power Cables to the Monitor
Installing the Monitor on the Stand 5
2. Place the stand on a desktop or table and push the neck on the stand down to its lowest position.
Slide the monitor all the way onto the stand so that the Quick Release mounting device emits an
audible click and is locked in place.
Figure 3-2 Installing the Monitor on the Stand
3. Route the monitor VGA and power cables through the cable guides at the bottom corners of the
mounting panel.
Figure 3-3 Routing Monitor VGA and Power Cables
4. To install an HP USDT computer on the rear of the stand, follow the procedure in Installing an HP
Ultra-slim Desktop (USDT) on the Stand on page 7. To install an HP Thin Client computer on
the rear of the stand, follow the procedure in
Installing an HP Thin Client on the Stand
on page 11.
6 Chapter 3 Setting Up the Monitor
Installing an HP Ultra-slim Desktop (USDT) on the Stand
You can install an HP USDT or Thin Client computer on the rear side of the stand. This section provides
instructions on installing the USDT.
1. On the rear of the stand, remove the two screws (1) from the top of the computer mounting bracket
and lift the bracket off the stand (2).
Figure 3-4 Removing the Computer Mounting Bracket
Installing an HP Ultra-slim Desktop (USDT) on the Stand 7
2. Use the four screws provided to install the computer mounting bracket on the USDT computer.
NOTE: There are two sets of screw holes on the computer mounting bracket. Use the four holes
that are offset to install the USDT.
Be sure to install the computer mounting bracket on the USDT so that the rear ports on the USDT
are toward the right when viewed from the rear of the monitor stand. (The rear ports should be
toward the left when viewed from the front of the monitor.)
Figure 3-5 Installing the Computer Mounting Bracket on the USDT
3. Slide the computer mounting bracket/USDT computer onto the stand (1) and reinstall the two
screws on top of the bracket (2).
Figure 3-6 Sliding the USDT onto the Stand
4. Thread the VGA cable from the monitor, along with the circular end of the computer power cable
and any other cables that will connect to the rear of the computer (such as keyboard and mouse
8 Chapter 3 Setting Up the Monitor
cables), up through the bottom hole of the USDT computer's port cover (1) and then connect the
cables to the rear of the computer (2).
5. Plug the computer and monitor power cables into an electrical wall outlet (3).
Figure 3-7 Connecting the Cables
6. Insert the hooks on the port cover into the slots on the rear of the USDT chassis and slide the port
cover down so that it locks in place.
Figure 3-8 Installing the Port Cover
Installing an HP Ultra-slim Desktop (USDT) on the Stand 9
Loading...