HP JC106A, JC102A, JG219A, 5820-14XG-SFP+, 5820X-24XG-SFP+ Specification

...

Download

Page 1

Models

HP 5820-14XG-SFP+ Switch with 2 Slots

JC106A

HP 5820X-24XG-SFP+ Switch

JC102A

HP 5820AF-24XG Switch

JG219A

Key features

For enterprise edge, or distribution/data center Up to 24 ports of 10GbE per unit/194 per stack Flex chassis—modular resiliency Cut-through switching for very low latency Hot-swappable I/O, power supplies, and fans

Product overview

The HP 5820 Switch Series supports advanced features that deliver a unique combination of unmatched 10 Gigabit Ethernet; Fibre Channel over Ethernet (FCoE) connectivity; high-availability architecture; full Layer 2/3 dual-stack IPv4/IPv6; and line-rate, low-latency performance on all ports. Extensible embedded application capabilities enable these switches to integrate services into the network, consolidating devices and appliances to simplify deployment and reduce power consumption and rack space. Extremely versatile, the switches can be used in high-performance, high-density building or department cores as part of a consolidated network; for data center top-of-rack server access; or as high-performance Layer 3, 10GbE aggregation switches in campus and data center networks.

Features and benefits

Quality of Service

(QoS)

Powerful QoS feature

creates traffic classes based on access control lists (ACLs), IEEE 802.1p precedence, IP, and DSCP or Type of Service (ToS) precedence; supports filter, redirect, mirror, or remark; supports the following congestion actions: strict priority (SP) queuing, weighted round robin (WRR), weighted fair queuing (WFQ), weighted random early discard (WRED), weighted deficit round robin (WDRR), and SP+WDRR

Integrated network services

with support for open application architecture (OAA) modules, extends and integrates application capability into the network

Ring Resiliency Protection Protocol

(RRPP) provides fast recovery for ring Ethernet-based topology; helps ensure consistent application performance for applications such as VoIP

Management

Remote configuration and management

is available through a secure Web browser or a command-line interface (CLI)

IEEE 802.1ab LLDP discovery

advertises and receives management information from adjacent devices on a network

USB support

File copy

allows users to copy switch files to and from a USB flash drive

DHCP options

QuickSpecs

HP 5820 Switch Series

Overview

DA - 13791 North America — Version 18 — November 22, 2013

Page 1

Page 2

provides server (RFC 2131), client, snooping, and relay options

SNMPv1, v2c, and v3

facilitate centralized discovery, monitoring, and secure management of networking devices

sFlow

provides scalable ASIC-based network monitoring and accounting; this allows network operators to gather a variety of sophisticated network statistics and information for capacity planning and real-time network monitoring purposes

Network Time Protocol

(NTP) synchronizes timekeeping among distributed time servers and clients; keeps consistent timekeeping among all clock-dependent devices within the network so that the devices can provide diverse applications based on the consistent time

Connectivity

High-density port connectivity

194 10-GbE ports with a 40 Gbps resilient backplane

Data center I/O consolidation

the 5820-14XG FCoE module supports two 4x8/4/2 Gbps FCoE modules (up to eight FC ports total) to reduce cost and complexity while boosting network performance

Auto-MDIX

provides automatic adjustments for straight-through or crossover cables on all 10/100 and 10/100/1000 ports

Jumbo frames

on Gigabit Ethernet and 10-Gigabit ports, jumbo frames allow high-performance remote backup and disaster-recovery services

IPv6 native support

IPv6 host

enables switches to be managed and deployed at the IPv6 network's edge

Dual stack (IPv4/IPv6)

transitions from IPv4 to IPv6, supporting connectivity for both protocols

MLD snooping

forwards IPv6 multicast traffic to the appropriate interface

IPv6 ACL/QoS

supports ACL and QoS for IPv6 network traffic, preventing traffic flooding

IPv6 routing

supports IPv6 static routes and IPv6 versions of RIP, OSPF, IS-IS, and Border Gateway Protocol (BGP) routing protocols

Performance

Hardware-based wire-speed access control lists (ACLs)

helps provide high levels of security and ease of administration without impacting network performance with a feature-rich TCAM-based ACL implementation

Unique versatile architecture

supports the best of both fixed-port and modular configurations

Cut-through switching

delivers wire-speed, line-rate performance on all ports, as well as cut-through switching for low latency

Resiliency and high availability

Data center–optimized design

HP 5820AF-24XG Switch (JG219A) supports front-to-back/back-to-front airflow for hot/cold aisles, rear rack mounts, and redundant hot-swappable AC or DC power and fans

Manageability

QuickSpecs

HP 5820 Switch Series

Overview

DA - 13791 North America — Version 18 — November 22, 2013

Page 2

Page 3

Full-featured console

provides complete control of the switch with a familiar CLI

Web interface

allows configuration of the switch from any Web browser on the network

RMON and sFlow

provide advanced monitoring and reporting capabilities for statistics, history, alarms, and events

Multiple configuration files

allow multiple configuration files to be stored to a flash image

Troubleshooting

Ingress and egress port monitoring

enable network problem solving

Traceroute and ping

enable testing of network connectivity

Virtual cable tests

provide visibility to cable problems

Layer 2 switching

32K MAC addresses

provide access to many Layer 2 devices

4,094 port-based VLANs

provide security between workgroups

IEEE 802.1ad QinQ and Selective QinQ

increase the scalability of an Ethernet network by providing a hierarchical structure; connect multiple LANs on a high-speed campus or metro network

Gigabit Ethernet port aggregation

allows grouping of ports to increase overall data throughput to a remote device

10 GbE port aggregation

allows grouping of ports to increase overall data throughput to a remote device

Spanning Tree/MSTP, RSTP, and STP Root Guard

prevent network loops

sFlow

allows traffic sampling

GVRP VLAN Registration Protocol

allows automatic learning and dynamic assignment of VLANs

Layer 3 services

Address Resolution Protocol (ARP)

determines the MAC address of another IP host in the same subnet; supports static ARPs; gratuitous ARP allows detection of duplicate IP addresses; proxy ARP allows normal ARP operation between subnets or when subnets are separated by a Layer 2 network

Dynamic Host Configuration Protocol (DHCP)

simplifies the management of large IP networks and supports client and server; DHCP Relay enables DHCP operation across subnets

Layer 3 routing

Layer 3 IPv4 routing

provides routing of IPv4 at media speed; supports static routes, RIP and RIPv2, OSPF, IS-IS, and BGP

QuickSpecs

HP 5820 Switch Series

Overview

DA - 13791 North America — Version 18 — November 22, 2013

Page 3

Page 4

Routing Information Protocol (RIP) and RIPng support

provides complete support of RIP for both IPv4 and IPv6

OSPF and OSPFv3 support

provides complete support of OSPF for both IPv4 and IPv6

IS-IS and IS-ISv6 support

provides complete support of IS-IS for both IPv4 and IPv6

Layer 3 IPv6 routing

provides routing of IPv6 at media speed; supports static routes, RIPng, OSPFv3, IS-ISv6, and BGP4+

Bidirectional Forwarding Detection (BFD)

enables link connectivity monitoring and reduces network convergence time for RIP, OSPF, BGP, IS-IS, VRRP, MPLS, and IRF

Virtual Router Redundancy Protocol (VRRP) and VRRP Extended

allow quick failover of router ports

Policy-based routing

makes routing decisions based on policies set by the network administrator

IGMPv1, v2, and v3

allow individual hosts to be registered on a particular VLAN

PIM-SSM, PIM-DM, and PIM-SM (for IPv4 and IPv6)

support IP Multicast address management and inhibition of DoS attacks

Equal-Cost Multipath (ECMP)

enables multiple equal-cost links in a routing environment to increase link redundancy and scale bandwidth

Security

Defense-in-depth security

provides integrated and distributed security enforcement that can be managed from a central location, such as the HP Intelligent Management Center (IMC)

Advanced processor queuing mechanism

helps prevent denial-of-service (DoS) attacks, while DHCP snooping helps ensure that devices can only receive an IP address from a legitimate DHCP server on the network

RADIUS/HWTACACS

eases switch management security administration by using a password authentication server

Secure Shell (SSHv2)

encrypts all transmitted data for secure, remote CLI access over IP networks

IEEE 802.1X-based dynamic delivery of QoS, ACLs, and VLANs

allows complete control over user network access

Guest VLAN

provides a browser-based environment to authenticated clients, similar to IEEE 802.1X

Port isolation

secures and adds privacy, and prevents malicious attackers from obtaining user information

Port security

allows access only to specified MAC addresses, which can be learned or specified by the administrator

MAC-based authentication

allows or denies access to the switch based on a client MAC address

IP Source Guard

helps prevent IP spoofing attacks

HTTPS management

provides secure Web management

URPF

limits malicious traffic on a network

Multi-Customer Edge (MCE)-Multicast Virtual Routing and Forwarding (MVRF)

QuickSpecs

HP 5820 Switch Series

Overview

DA - 13791 North America — Version 18 — November 22, 2013

Page 4

Page 5

provide MPLS Edge router support

Public Key Infrastructure (PKI)

is used to control access

Convergence

Voice VLAN

automatically assigns VLAN and priority for IP phones, simplifying network configuration and maintenance

LLDP-MED

is a standard extension that automatically configures network devices, including LLDP-capable IP phones

Internet Group Management Protocol (IGMP)

utilizes Any-Source Multicast (ASM) or Source-Specific Multicast (SSM) to manage IPv4 multicast networks; supports IGMPv1, v2, and v3

Protocol Independent Multicast (PIM)

defines modes of Internet multicasting to allow one-to-many and many-to-many transmission of information; PIM Dense Mode (DM), Sparse Mode (SM), and Source-Specific Mode (SSM) are support

Monitor and diagnostics

Port mirroring

enables traffic on a port to be simultaneously sent to a network analyzer for monitoring

OAM (802.3ah)

operations, administration and maintenance (OAM) management capability detects data link layer problems that occurred in the "last mile"; monitors the status of the link between the two devices

CFD (802.1ag)

connectivity fault detection (CFD) provides a Layer 2 link OAM (operations, administration, and maintenance) mechanism used for link connectivity detection and fault locatin

Additional information

Intelligent Resilient Framework (IRF)

Creates virtual resilient switching fabrics, where two or more switches perform as a single Layer 2 switch and Layer 3 router Does not require switches to be co-located and allows them to be part of a disaster-recovery system Allows servers or switches to be attached using standard LACP for automatic load balancing and high availability Simplifies network operation by eliminating the complexity of Spanning Tree Protocol, ECMP, or VRRP

OAA modules

support wireless network management and high-performance security applications; leverage network infrastructure investment

Green IT and power

improves energy efficiency through the use of the latest advances in silicon development; shuts off unused ports and utilizes variable-speed fans, reducing energy costs

High scalability with IRF

HP Intelligent Resilient Framework (IRF) technology simplifies the architecture of server access networks; up to nine HP 5820/5820AF stackable switches can be combined to deliver unmatched scalability of virtualized access layer switches and flatter, two-tier FlexFabric networks using IRF, which reduces cost and complexity

Warranty and support

1-year warranty

with advance replacement and 10-calendar-day delivery (available in most countries)

QuickSpecs

HP 5820 Switch Series

Overview

DA - 13791 North America — Version 18 — November 22, 2013

Page 5

Page 6

Electronic and telephone support

limited electronic and telephone support is available from HP; to reach our support centers, refer to

www.hp.com/networking/contact-support

; for details on the duration of support provided with your product purchase, refer to

www.hp.com/networking/warrantysummary

Software releases

to find software for your product, refer to

www.hp.com/networking/support

; for details on the software releases available with

your product purchase, refer to

www.hp.com/networking/warrantysummary

QuickSpecs

HP 5820 Switch Series

Overview

DA - 13791 North America — Version 18 — November 22, 2013

Page 6

Page 7

Build To Order:

BTO is a standalone unit with no integration. BTO products ship standalone are not part of a CTO or Rack-

Shippable solution.

Standard Switch Chassis

HP 5820-14XG-SFP+ Switch with 2 Slots

JC106A

4 RJ-45 autosensing 10/100/1000 ports 2 module slots 14 fixed 1000/10000 SFP+ ports min=0 \ max=14 SFP+ Transceivers 1 Power Supply Required 2U - Height

See

Configuration

Note:1

HP 5820-24XG-SFP+ Switch

JC102A

4 RJ-45 autosensing 10/100/1000 ports 24 fixed 1000/10000 SFP+ ports min=0 \ max=24 SFP+ Transceivers 1 Power Supply Required 1U - Height

See

Configuration

Note:1

HP 5820AF-24XG Switch

JG219A

4 RJ-45 autosensing 10/100/1000 ports 24 fixed 1000/10000 SFP+ ports min=0 \ max=24 SFP+ Transceivers 1 Power Supply Required 2 Fan Trays Required 1U - Height

See

Configuration

Note:1

Configuration Rules:

Note 1

The following Transceivers install into this Module (Max = 14 or 24 depending on Switch) (Use #0D1 or #B01 if switch is CTO):

HP X130 SFP+ LC SR Transceiver

JD092B

HP X130 SFP+ LC LRM Transceiver

JD093B

HP X130 SFP+ LC LR Transceiver

JD094B

HP X130 10G SFP+ LC ER 40km Transceiver

JG234A

HP X240 10G SFP+ SFP+ 0.65m DAC Cable

JD095C

HP X240 10G SFP+ SFP+ 1.2m DAC Cable

JD096C

HP X240 10G SFP+ SFP+ 3m DAC Cable

JD097C

HP X240 10G SFP+ SFP+ 5m DAC Cable

JG081C

HP X125 1G SFP LC LH40 1310nm Transceiver

JD061A

HP X120 1G SFP LC LH40 1550nm Transceiver

JD062A

HP X125 1G SFP LC LH70 Transceiver

JD063B

HP X120 1G SFP LC SX Transceiver

JD118B

HP X120 1G SFP LC LX Transceiver

JD119B

HP X120 1G SFP RJ45 T Transceiver

JD089B

QuickSpecs

HP 5820 Switch Series

Configuration

DA - 13791 North America — Version 18 — November 22, 2013

Page 7

Page 8

Box Level Integration CTO Models

CTO Solution Sku

HP 58xx CTO Switch Solution

JG478A

SSP trigger sku

CTO Base Sku

HP 5820-14XG-SFP+ w/2 Slots CTO Switch

JC106AC

4 RJ-45 autosensing 10/100/1000 ports 2 module slots 14 fixed 1000/10000 SFP+ ports min=0 \ max=14 SFP+ Transceivers 1 Power Supply Required 2U - Height

See

Configuration

Note:1,4

HP 5820-24XG-SFP+ CTO Switch

JC102AC

4 RJ-45 autosensing 10/100/1000 ports 24 fixed 1000/10000 SFP+ ports min=0 \ max=24 SFP+ Transceivers 1 Power Supply Required 1U - Height

See

Configuration

Note:1,4

HP 5820AF-24XG Switch

JG219A

4 RJ-45 autosensing 10/100/1000 ports 24 fixed 1000/10000 SFP+ ports (min=0 \ max=24 SFP+ Transceivers) 1 Power Supply Required 2 Fan Trays Required 1U - Height

See

Configuration

Note:1, 4

Configuration Rules:

Note 1

The following Transceivers install into this Module (Max = 14 or 24 depending on Switch): (Use #0D1 if switch is CTO)

HP X130 SFP+ LC SR Transceiver

JD092B

HP X130 SFP+ LC LRM Transceiver

JD093B

HP X130 SFP+ LC LR Transceiver

JD094B

HP X130 10G SFP+ LC ER 40km Transceiver

JG234A

HP X240 10G SFP+ SFP+ 0.65m DAC Cable

JD095C

HP X240 10G SFP+ SFP+ 1.2m DAC Cable

JD096C

HP X240 10G SFP+ SFP+ 3m DAC Cable

JD097C

HP X240 10G SFP+ SFP+ 5m DAC Cable

JG081C

HP X125 1G SFP LC LH40 1310nm Transceiver

JD061A

HP X120 1G SFP LC LH40 1550nm Transceiver

JD062A

QuickSpecs

HP 5820 Switch Series

Configuration

DA - 13791 North America — Version 18 — November 22, 2013

Page 8

Page 9

HP X125 1G SFP LC LH70 Transceiver

JD063B

HP X120 1G SFP LC SX Transceiver

JD118B

HP X120 1G SFP LC LX Transceiver

JD119B

HP X120 1G SFP RJ45 T Transceiver

JD089B

Note 4

If the Switch Chassis is to be Box Level Factory Integrated (CTO), Then the #0D1 is required on the Switch Chassis and integrated to the JG478A - HP 58xx CTO Enablement. (Max 1 switch per SSP)

Rack Level Integration CTO Models

Standard Switch Chassis

HP 5820-14XG-SFP+ Switch with 2 Slots

JC106A

4 RJ-45 autosensing 10/100/1000 ports 2 module slots 14 fixed 1000/10000 SFP+ ports min=0 \ max=14 SFP+ Transceivers 1 Power Supply Required 2U - Height

See

Configuration

Note:1, 11

HP 5820-24XG-SFP+ Switch

JC102A

4 RJ-45 autosensing 10/100/1000 ports 24 fixed 1000/10000 SFP+ ports min=0 \ max=24 SFP+ Transceivers 1 Power Supply Required 1U - Height

See

Configuration

Note:1, 11

HP 5820AF-24XG Switch

JG219A

4 RJ-45 autosensing 10/100/1000 ports 24 fixed 1000/10000 SFP+ ports (min=0 \ max=24 SFP+ Transceivers) 1 Power Supply Required 2 Fan Trays Required 1U - Height

See

Configuration

Note:1, 4, 11

Configuration Rules:

Note 1

The following Transceivers install into this Module (Max = 14 or 24 depending on Switch): HP X130 SFP+ LC SR Transceiver

JD092B

HP X130 SFP+ LC LRM Transceiver

JD093B

HP X130 SFP+ LC LR Transceiver

JD094B

HP X130 10G SFP+ LC ER 40km Transceiver

JG234A

HP X240 10G SFP+ SFP+ 0.65m DAC Cable

JD095C

HP X240 10G SFP+ SFP+ 1.2m DAC Cable

JD096C

HP X240 10G SFP+ SFP+ 3m DAC Cable

JD097C

HP X240 10G SFP+ SFP+ 5m DAC Cable

JG081C

HP X125 1G SFP LC LH40 1310nm Transceiver

JD061A

QuickSpecs

HP 5820 Switch Series

Configuration

DA - 13791 North America — Version 18 — November 22, 2013

Page 9

Page 10

HP X120 1G SFP LC LH40 1550nm Transceiver

JD062A

HP X125 1G SFP LC LH70 Transceiver

JD063B

HP X120 1G SFP LC SX Transceiver

JD118B

HP X120 1G SFP LC LX Transceiver

JD119B

HP X120 1G SFP RJ45 T Transceiver

JD089B

Note 4

Switch Height is 2U if the JC682A - HP A58x0AF Bck(pwr)-Frt(ports) Fan Tray is ordered #0D1 with this switch. REMARK: This only applies for CTO Rack Level Integration.

Note 11

If HP CTO Switch Chassis is selected for Rack Level Integration, Then the Switch needs to integrate (with #0D1) to the HP Rack.

Enter the following menu selections as integrated to the CTO Model X server above if order is factory built.

Modules

Ethernet Modules

(JC106x and JG259x Switch Only ) System (std 0 // max 2) User Selection (min 0 // max 2) per chassis

HP 5800 4-port 10GbE SFP+ Module

JC091A

min=0 \ max=4 SFP + Transceivers

See

Configuration

Note:1

HP 5800 2-port 10GbE SFP+ Module

JC092B

min=0 \ max=2 SFP + Transceivers

See

Configuration

Note:1

HP 5820 4-port 8/4/2 Gbps FCoE SFP+ Mod

JC530A

min=0 \ max=4 SFP + Transceivers

See

Configuration

Note:1

Configuration Rules:

Note 1

The following Transceivers install into this Module: (Use #0D1 or #B01 if switch is CTO) HP X130 SFP+ LC SR Transceiver

JD092B

HP X130 SFP+ LC LRM Transceiver

JD093B

HP X130 SFP+ LC LR Transceiver

JD094B

HP X130 10G SFP+ LC ER 40km Transceiver

JG234A

HP X240 10G SFP+ SFP+ 0.65m DAC Cable

JD095C

HP X240 10G SFP+ SFP+ 1.2m DAC Cable

JD096C

HP X240 10G SFP+ SFP+ 3m DAC Cable

JD097C

HP X240 10G SFP+ SFP+ 5m DAC Cable

JG081C

QuickSpecs

HP 5820 Switch Series

Configuration

DA - 13791 North America — Version 18 — November 22, 2013

Page 10

Page 11

Access Control Modules

(JC106x and JG259x Switch Only ) System (std 0 // max 1) User Selection (min 0 // max 1) per chassis

HP A5800 Access Controller Module for 32-64 Aps

JD443A

No Transceivers

HP 5820 VPN Firewall Module

JD255A

No Transceivers

Configuration Rules:

Note 1

This Module install to the following switches only: JC106x - HP 5820-14XG-SFP+ Switch with 2 Slots

Transceivers

SFP+ Transceivers

HP X130 10G SFP+ LC SR Transceiver

JD092B

HP X130 10G SFP+ LC LRM Transceiver

JD093B

HP X130 10G SFP+ LC LR Transceiver

JD094B

HP X130 10G SFP+ LC ER 40km Transceiver

JG234A

HP X240 10G SFP+ SFP+ 0.65m DAC Cable

JD095C#B01

HP X240 10G SFP+ SFP+ 1.2m DAC Cable

JD096C#B01

HP X240 10G SFP+ SFP+ 3m DAC Cable

JD097C#B01

HP X240 10G SFP+ SFP+ 5m DAC Cable

JG081C#B01

SFP Transceivers

HP X125 1G SFP LC LH40 1310nm XCVR

JD061A

HP X120 1G SFP LC LH40 1550nm XCVR

JD062A

HP X120 1G SFP LC SX Transceiver

JD118B

HP X120 1G SFP LC LX Transceiver

JD119B

HP X125 1G SFP LC LH70 Transceiver

JD063B

HP X120 1G SFP RJ45 T Transceiver

JD089B

Internal Power Supplies

System (std 0 // max 2) User Selection (min 1 // max 2) per switch enclosure

HP A5800 300W DC Power Supply

JC090A

QuickSpecs

HP 5820 Switch Series

Configuration

DA - 13791 North America — Version 18 — November 22, 2013

Page 11

Page 12

See

Configuration

Note:1, 2

HP A5800 300W AC Power Supply

JC087A

includes 1 x c13, 300w

See Configuration Note:1, 2, 3, 4

PDU Cable NA/MEX/TW/JP

JC087A#B2B

C15 PDU Jumper Cord (NA/MEX/TW/JP)

PDU Cable ROW

JC087A#B2C

C15 PDU Jumper Cord (ROW)

HP A58x0AF 650W AC Power Supply

JC680A

includes 1 x c13, 650w

See Configuration

Note:1, 2, 5

PDU Cable NA/MEX/TW/JP

JC680A#B2B

C15 PDU Jumper Cord (NA/MEX/TW/JP)

PDU Cable ROW

JC680A#B2C

C15 PDU Jumper Cord (ROW)

HP 58x0AF 650W DC Power Supply

JC681A

See Configuration

Note:1, 5

Configuration Rules:

Note 1

If 2 power supplies are selected they must be the same Sku number.

Note 2

Supported only on the JC102x, JC106x, JG243x, and JG259x Switches

Note 3

Localization required on orders without #B2B or #B2C options.

Note 4

Localization (Wall Power Cord) required on orders without #B2B, #B2C (PDU Power Cord) . (See Localization Menu) REMARK: When Switches/Routers are Factory Racked, Then #B2B, or #B2C should be the Defaulted Power Cable option on the Switches/Routers.

Note 5

Supported only on the JG219A Switch

Remarks:

QuickSpecs

HP 5820 Switch Series

Configuration

DA - 13791 North America — Version 18 — November 22, 2013

Page 12

Page 13

Drop down under power supply should offer the following options and results: Switch/Router/Power Supply to PDU Power Cord - #B2B in North America, Mexico, Taiwan, and Japan or #B2C ROW. (Watson Default B2B or B2C for Rack Level CTO) Switch/Router/Power Supply to Wall Power Cord - Localized Option (Watson Default for BTO and Box Level CTO)

Switch Options

Fan Trays

(JG219A only) System (std 0 // max 2) User Selection (min 2 // max 2) per switch

HP 58x0AF Bck(pwr)-Frt(ports) Fan Tray

JC682A

See Configuration

Note:1, 2

HP 58x0AF Frt(ports)-Bck(pwr) Fan Tray

JC683A

See Configuration

Note:1

Configuration Rules:

Note 1

Fan Trays cannot be mixed in the same switch enclosure

Note 2

This Fan Tray requires an Air Plenum kit for better air flow. The Air Plenum kit requires 1U of additional space in the rack. REMARK: This only applies for CTO Rack Level Integration. The Air Plenum Kit is a nonsaleable SKU, and is brought in automatically for CTO Rack Level Integration)

QuickSpecs

HP 5820 Switch Series

Configuration

DA - 13791 North America — Version 18 — November 22, 2013

Page 13

Page 14

Build To Order:

BTO is a standalone unit with no integration. BTO products ship standalone are not part of a CTO or Rack-

Shippable solution.

Standard Switch Chassis

HP 5820AF-24XG Switch

JG219A

4 RJ-45 autosensing 10/100/1000 ports 24 fixed 1000/10000 SFP+ ports min=0 \ max=24 SFP+ Transceivers 1 Power Supply Required 2 Fan Trays Required 1U - Height

See Configuration

Note:1

Configuration Rules:

Note 1

The following Transceivers install into this Module (Max = 24 depending on Switch): HP X130 SFP+ LC SR Transceiver

JD092B

HP X130 SFP+ LC LRM Transceiver

JD093B

HP X130 SFP+ LC LR Transceiver

JD094B

HP X130 10G SFP+ LC ER 40km Transceiver

JG234A

HP X240 10G SFP+ SFP+ 0.65m DAC Cable

JD095C

HP X240 10G SFP+ SFP+ 1.2m DAC Cable

JD096C

HP X240 10G SFP+ SFP+ 3m DAC Cable

JD097C

HP X240 10G SFP+ SFP+ 5m DAC Cable

JG081C

HP X240 10G SFP+ 7m DAC Cable

JC784C

HP X125 1G SFP LC LH40 1310nm Transceiver

JD061A

HP X120 1G SFP LC LH40 1550nm Transceiver

JD062A

HP X125 1G SFP LC LH70 Transceiver

JD063B

HP X120 1G SFP LC SX Transceiver

JD118B

HP X120 1G SFP LC LX Transceiver

JD119B

HP X120 1G SFP RJ45 T Transceiver

JD089B

Box Level Integration CTO Models

CTO Solution Sku

HP 58xx CTO Switch Solution

JG478A

SSP trigger sku

CTO Switch Chassis

HP 5820AF-24XG Switch

JG219A

QuickSpecs

HP 5820 Switch Series

Configuration AF Model

DA - 13791 North America — Version 18 — November 22, 2013

Page 14

Page 15

4 RJ-45 autosensing 10/100/1000 ports 24 fixed 1000/10000 SFP+ ports (min=0 \ max=24 SFP+ Transceivers) 1 Power Supply Required 2 Fan Trays Required 1U - Height

See Configuration

Note:1, 10

Configuration Rules:

Note 1

The following Transceivers install into this Switch: (Use #0D1 or #B01 quoted to switch if switch is CTO) - if applicable

HP X130 SFP+ LC SR Transceiver

JD092B

HP X130 SFP+ LC LRM Transceiver

JD093B

HP X130 SFP+ LC LR Transceiver

JD094B

HP X130 10G SFP+ LC ER 40km Transceiver

JG234A

HP X240 10G SFP+ SFP+ 0.65m DAC Cable

JD095C

HP X240 10G SFP+ SFP+ 1.2m DAC Cable

JD096C

HP X240 10G SFP+ SFP+ 3m DAC Cable

JD097C

HP X240 10G SFP+ SFP+ 5m DAC Cable

JG081C

HP X240 10G SFP+ 7m DAC Cable

JC784C

HP X125 1G SFP LC LH40 1310nm Transceiver

JD061A

HP X120 1G SFP LC LH40 1550nm Transceiver

JD062A

HP X125 1G SFP LC LH70 Transceiver

JD063B

HP X120 1G SFP LC SX Transceiver

JD118B

HP X120 1G SFP LC LX Transceiver

JD119B

HP X120 1G SFP RJ45 T Transceiver

JD089B

Note 10

If the Switch Chassis is to be Box Level Factory Integrated (CTO), Then the #0D1 is required on the Switch Chassis and integrated to the JG478A - HP 58xx CTO Enablement. (Min 1/Max 1 Switch per SSP)

Rack Level Integration CTO Models

CTO Switch Chassis

HP 5820AF-24XG Switch

JG219A

4 RJ-45 autosensing 10/100/1000 ports 24 fixed 1000/10000 SFP+ ports (min=0 \ max=24 SFP+ Transceivers) 1 Power Supply Required 2 Fan Trays Required 1U - Height

See Configuration

Note:1, 4, 11

Configuration Rules:

Note 1

The following Transceivers install into this Switch: (Use #0D1 or #B01 quoted to switch if switch is CTO) - if applicable

HP X130 SFP+ LC SR Transceiver

JD092B

HP X130 SFP+ LC LRM Transceiver

JD093B

QuickSpecs

HP 5820 Switch Series

Configuration AF Model

DA - 13791 North America — Version 18 — November 22, 2013

Page 15

Page 16

HP X130 SFP+ LC LR Transceiver

JD094B

HP X130 10G SFP+ LC ER 40km Transceiver

JG234A

HP X240 10G SFP+ SFP+ 0.65m DAC Cable

JD095C

HP X240 10G SFP+ SFP+ 1.2m DAC Cable

JD096C

HP X240 10G SFP+ SFP+ 3m DAC Cable

JD097C

HP X240 10G SFP+ SFP+ 5m DAC Cable

JG081C

HP X240 10G SFP+ 7m DAC Cable

JC784C

HP X125 1G SFP LC LH40 1310nm Transceiver

JD061A

HP X120 1G SFP LC LH40 1550nm Transceiver

JD062A

HP X125 1G SFP LC LH70 Transceiver

JD063B

HP X120 1G SFP LC SX Transceiver

JD118B

HP X120 1G SFP LC LX Transceiver

JD119B

HP X120 1G SFP RJ45 T Transceiver

JD089B

Note 4

Switch Height is 2U if the JC682A - HP A58x0AF Bck(pwr)-Frt(ports) Fan Tray is ordered #0D1 with this switch. REMARK: This only applies for CTO Rack Level Integration.

Note 11

If HP CTO Switch Chassis is selected for Rack Level Integration, Then the JG219A - HP 5820AF-24XG Switch needs to integrate (with #0D1) to the HP Rack.

Enter the following menu selections as integrated to the CTO Model X server above if order is factory built.

Transceivers

SFP+ Transceivers

HP X130 10G SFP+ LC SR Transceiver

JD092B

HP X130 10G SFP+ LC LRM Transceiver

JD093B

HP X130 10G SFP+ LC LR Transceiver

JD094B

HP X130 10G SFP+ LC ER 40km Transceiver

JG234A

HP X240 10G SFP+ SFP+ 0.65m DAC Cable

JD095C#B01

HP X240 10G SFP+ SFP+ 1.2m DAC Cable

JD096C#B01

HP X240 10G SFP+ SFP+ 3m DAC Cable

JD097C#B01

HP X240 10G SFP+ SFP+ 5m DAC Cable

JG081C#B01

HP X240 10G SFP+ 7m DAC Cable

JC784C#B01

SFP Transceivers

HP X125 1G SFP LC LH40 1310nm XCVR

JD061A

HP X120 1G SFP LC LH40 1550nm XCVR

JD062A

HP X120 1G SFP LC SX Transceiver

JD118B

HP X120 1G SFP LC LX Transceiver

JD119B

HP X125 1G SFP LC LH70 Transceiver

JD063B

HP X120 1G SFP RJ45 T Transceiver

JD089B

QuickSpecs

HP 5820 Switch Series

Configuration AF Model

DA - 13791 North America — Version 18 — November 22, 2013

Page 16

Page 17

Internal Power Supplies

(JG219A only) System (std 0 // max 2) User Selection (min 1 // max 2) per switch enclosure

HP A58x0AF 650W AC Power Supply

JC680A

includes 1 x c13, 650w

See Configuration

Note:1, 2

PDU Cable NA/MEX/TW/JP

#B2B

C15 PDU Jumper Cord (NA/MEX/TW/JP)

PDU Cable ROW

#B2C

C15 PDU Jumper Cord (ROW)

HP 58x0AF 650W DC Power Supply

JC681A

See Configuration

Note:1

Configuration Rules:

Note 1

If 2 power supplies are selected they must be the same Sku number.

Note 2

Remarks:

Switch Options

Fan Trays

(JG219A only) System (std 0 // max 2) User Selection (min 2 // max 2) per switch

HP 58x0AF Bck(pwr)-Frt(ports) Fan Tray

JC682A

See Configuration

Note:1, 2

HP 58x0AF Frt(ports)-Bck(pwr) Fan Tray

JC683A

See Configuration

Note:1

QuickSpecs

HP 5820 Switch Series

Configuration AF Model

DA - 13791 North America — Version 18 — November 22, 2013

Page 17

Page 18

Configuration Rules:

Note 1

Fan Trays cannot be mixed in the same switch enclosure

Note 2

This Fan Tray requires an Air Plenum kit for better air flow. The Air Plenum kit requires 1U of additional space in the rack. REMARK: This only applies for CTO Rack Level Integration. The Air Plenum Kit is a non-saleable SKU, and is brought in automatically for CTO Rack Level Integration)

QuickSpecs

HP 5820 Switch Series

Configuration AF Model

DA - 13791 North America — Version 18 — November 22, 2013

Page 18

Page 19

HP 5820-14XG-SFP+ Switch with 2 Slots

(JC106A)

Ports

14 SFP+ 10-GbE ports; Duplex: full only 2 extended module slots 1 open module slot 4 RJ-45 auto-negotiating 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX,

IEEE 802.3ab Type 1000BASE-T) 1 RJ-45 serial console port Supports a maximum of 14 SFP+ ports plus 8 8/4/2 Gbps Fibre Channel SFP+ ports, with optional module

Power supplies

2 power-supply slots 1 minimum power-supplies required (ordered separately)

Fan tray

includes: 1 x JC096A 1 fan tray slot Base product includes fan tray

Physical characteristics

Dimensions

17.32(w) x 18.39(d) x 3.39(h) in (43.99 x 46.7 x 8.61 cm) (2U height)

Weight

33.29 lb (15.1 kg)

Memory and processor

1024 MB SDRAM, 512 MB flash; packet buffer size: 2 MB

Performance

Latency

2.02 µs (Cut Through) 2.02 µs, (Store and Forward) (64-byte packets)

Throughput

up to 363 million pps (64-byte packets)

Routing/Switching capacity

488 Gbps

Routing table size

12000 entries

MAC address table size

32000 entries

Environment

Operating temperature

32°F to 113°F (0°C to 45°C)

Operating relative humidity

10% to 90%, noncondensing

Acoustic

Low-speed fan: 44.3 dB, High-speed fan: 54.1 dB

Electrical characteristics

Maximum heat dissipation

836 BTU/hr (881.98 kJ/hr)

Voltage

100-120/200-240 VAC

DC voltage

300 W DC: –48 VDC to –60 VDC

Frequency

50/60 Hz

Safety

UL 60950-1; EN 60825-1 Safety of Laser Products-Part 1; EN 60825-2 Safety of Laser Products-Part 2; IEC 60950-1; CAN/CSA-C22.2 No. 60950-1; Anatel; ULAR; GOST; EN 60950-1/A11; FDA 21 CFR Subchapter J; NOM; ROHS Compliance

Emissions

VCCI Class A; EN 55022 Class A; ICES-003 Class A; ANSI C63.4 2003; AS/NZS CISPR 22 Class A; EN 61000-3-2:2006; EN 61000-3-3:1995 +A1:2001+A2:2005; EMC Directive 2004/108/EC; FCC (CFR 47, Part

15) Class A

Immunity

Generic

ETSI EN 300 386 V1.3.3

EN 55024:1998+ A1:2001 + A2:2003

ESD

EN 61000-4-2; IEC 61000-4-2

Radiated

EN 61000-4-3; IEC 61000-4-3

QuickSpecs

HP 5820 Switch Series

Technical Specifications

DA - 13791 North America — Version 18 — November 22, 2013

Page 19

Page 20

EFT/Burst

EN 61000-4-4; IEC 61000-4-4

Surge

EN 61000-4-5; IEC 61000-4-5

Conducted

EN 61000-4-6; IEC 61000-4-6

Power frequency magnetic field

IEC 61000-4-8; EN 61000-4-8

Voltage dips and interruptions

EN 61000-4-11; IEC 61000-4-11

Harmonics

EN 61000-3-2, IEC 61000-3-2

Flicker

EN 61000-3-3, IEC 61000-3-3

Management

IMC - Intelligent Management Center; command-line interface; Web browser; SNMP Manager; Telnet; HTTPS; RMON1; FTP

Notes

The customer must order a power supply, as the device does not come with a PSU. At least one JC087A or JC090A is required.

Services

3-year, parts only, global next-day advance exchange (UY832E) 3-year, 4-hour onsite, 13x5 coverage for hardware (UV894E) 3-year, 4-hour onsite, 24x7 coverage for hardware (UV897E) 3-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 SW phone support and SW updates (UV900E) 3-year, 24x7 SW phone support, software updates (UV903E) Installation with minimum configuration, system-based pricing (UW451E) 4-year, 4-hour onsite, 13x5 coverage for hardware (UV895E) 4-year, 4-hour onsite, 24x7 coverage for hardware (UV898E) 4-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UV901E) 4-year, 24x7 SW phone support, software updates (UV904E) 5-year, 4-hour onsite, 13x5 coverage for hardware (UV896E) 5-year, 4-hour onsite, 24x7 coverage for hardware (UV899E) 5-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UV902E) 5-year, 24x7 SW phone support, software updates (UV905E) 3 Yr 6 hr Call-to-Repair Onsite (UW972E) 4 Yr 6 hr Call-to-Repair Onsite (UW973E) 5 Yr 6 hr Call-to-Repair Onsite (UW974E) 1-year, 4-hour onsite, 13x5 coverage for hardware (HR559E) 1-year, 4-hour onsite, 24x7 coverage for hardware (HR560E) 1-year, 6 hour Call-To-Repair Onsite for hardware (HR563E) 1-year, 24x7 software phone support, software updates (HR562E) 1-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone support and software updates (HR561E) 1-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange (U4D06E) 1-year, 24x7 software phone support, software updates + 4 hour hardware exchange (U0S83E) 3-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange (U4D57E) 3-year, 24x7 software phone support, software updates + 4 hour Hardware Exchange (U0T34E) 4-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange (U4E08E) 4-year, 24x7 software phone support, software updates + 4 hour Hardware Exchange (U0T85E) 5-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange (U0S32E) 5-year, 24x7 software phone support, software updates + 4 hour Hardware Exchange (U0U36E)

QuickSpecs

HP 5820 Switch Series

Technical Specifications

DA - 13791 North America — Version 18 — November 22, 2013

Page 20

Page 21

Refer to the HP website at:

www.hp.com/networking/services

for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local HP sales office.

HP 5820X-24XG-SFP+ Switch

(JC102A)

Ports

24 SFP+ 10-GbE ports; Duplex: full only 4 RJ-45 auto-negotiating 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX,

IEEE 802.3ab Type 1000BASE-T 1 RJ-45 serial console port Supports a maximum of 24 SFP+ ports plus 4 autosensing 10/100/1000 ports

Power supplies

2 power-supply slots 1 minimum power-supplies required (ordered separately)

Fan tray

includes: 1 x JC098A 1 fan tray slot Base product includes fan tray

Physical characteristics

Dimensions

17.32(w) x 16.81(d) x 1.73(h) in (44.0 x 42.7 x 4.4 cm) (1U height)

Weight

18.74 lb (8.5 kg)

Memory and processor

1024 MB SDRAM, 512 MB flash; packet buffer size: 2 M

Performance

Latency

2.02 µs (Cut Through) 2.02 µs, (Store and Forward) (64-byte packets)

Throughput

up to 363 million pps (64-byte packets)

Routing/Switching capacity

488 Gbps

Routing table size

12000 entries

MAC address table size

32000 entries

Environment

Operating temperature

32°F to 113°F (0°C to 45°C)

Operating relative humidity

10% to 90%, noncondensing

Acoustic

Low-speed fan: 48.4 dB, High-speed fan: 59.7 dB

Electrical characteristics

Maximum heat dissipation

631 BTU/hr (665.71 kJ/hr)

Voltage

100-120/200-240 VAC

DC voltage

300 W DC: –48 VDC to –60 VDC

Frequency

50/60 Hz

Safety

Emissions

VCCI Class A; EN 55022 Class A; ICES-003 Class A; ANSI C63.4 2003; AS/NZS CISPR 22 Class A; EN 61000-3-2:2006; EN 61000-3-3:1995 +A1:2001+A2:2005; EMC Directive 2004/108/EC; FCC (CFR 47, Part

15) Class A

Immunity

Generic

ETSI EN 300 386 V1.3.3

EN 55024:1998+ A1:2001 + A2:2003

QuickSpecs

HP 5820 Switch Series

Technical Specifications

DA - 13791 North America — Version 18 — November 22, 2013

Page 21

Page 22

ESD

EN 61000-4-2; IEC 61000-4-2

Radiated

EN 61000-4-3; IEC 61000-4-3

EFT/Burst

EN 61000-4-4; IEC 61000-4-4

Surge

EN 61000-4-5; IEC 61000-4-5

Conducted

EN 61000-4-6; IEC 61000-4-6

Power frequency magnetic field

IEC 61000-4-8; EN 61000-4-8

Voltage dips and interruptions

EN 61000-4-11; IEC 61000-4-11

Harmonics

EN 61000-3-2, IEC 61000-3-2

Flicker

EN 61000-3-3, IEC 61000-3-3

Management

IMC - Intelligent Management Center; command-line interface; Web browser; SNMP Manager; Telnet; HTTPS; RMON1; FTP

Notes

The customer must order a power supply, as the device does not come with a PSU. At least one JC087A or JC090A is required.

Services

QuickSpecs

HP 5820 Switch Series

Technical Specifications

DA - 13791 North America — Version 18 — November 22, 2013

Page 22

Page 23

5-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange (U0S32E) 5-year, 24x7 software phone support, software updates + 4 hour Hardware Exchange (U0U36E)

Refer to the HP website at:

www.hp.com/networking/services

for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local HP sales office.

HP 5820AF-24XG Switch

(JG219A)

Ports

24 fixed 1000/10000 SFP+ ports 2 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE

802.3ab Type 1000BASE-T); Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only 1 RJ-45 serial console port

1 RJ-45 out-of-band management port 1 USB 2.0

Power supplies

2 power-supply slots 1 minimum power-supplies required (ordered separately)

Fan tray

2 fan tray slots The customer must order fan trays, as fan trays are not included with the switch. This system requires two

same-direction airflow fan trays to function properly. The system should not be operated with only one fan tray for more than 24 hours. The system should not be operated without a fan tray more than two minutes. The system should not be operated outside of the temperature range of 32°F (0°C) to 113°F (45°C). Failure to comply with these operating requirements may void the product warranty.

Physical characteristics

Dimensions

25.98(w) x 17.32(d) x 1.72(h) in (65.99 x 43.99 x 4.37 cm) (1U height)

Weight

22.05 lb (10 kg), Fully loaded

Memory and processor

1024 MB flash, 512 MB SDRAM; packet buffer size: 2 MB

Performance

Latency

3 µs(64-byte packets)

Throughput

360 million pps

Routing/Switching capacity

484 Gbps

Routing table size

12000 entries

MAC address table size

32000 entries

Environment

Operating temperature

32°F to 113°F (0°C to 45°C)

Operating relative humidity

10% to 90%, noncondensing

Acoustic

Low-speed fan: 60.1 dB, High-speed fan: 69.9 dB

Electrical characteristics

Maximum heat dissipation

607 BTU/hr (640.39 kJ/hr)

Voltage

100-120/200-240 VAC

DC voltage

650W DC: -36 VDC to -72 VDC

Frequency

50/60 Hz

QuickSpecs

HP 5820 Switch Series

Technical Specifications

DA - 13791 North America — Version 18 — November 22, 2013

Page 23

Page 24

Safety

Emissions

VCCI Class A; EN 55022 Class A; ICES-003 Class A; ANSI C63.4 2003; AS/NZS CISPR 22 Class A; EN 61000-3-2:2006; EN 61000-3-3:1995 +A1:2001+A2:2005; EMC Directive 2004/108/EC; FCC (CFR 47, Part

15) Class A

Immunity

Generic

ETSI EN 300 386 V1.3.3

EN 55024:1998+ A1:2001 + A2:2003

ESD

EN 61000-4-2; IEC 61000-4-2

Radiated

EN 61000-4-3; IEC 61000-4-3

EFT/Burst

EN 61000-4-4; IEC 61000-4-4

Surge

EN 61000-4-5; IEC 61000-4-5

Conducted

EN 61000-4-6; IEC 61000-4-6

Power frequency magnetic field

IEC 61000-4-8; EN 61000-4-8

Voltage dips and interruptions

EN 61000-4-11; IEC 61000-4-11

Harmonics

EN 61000-3-2, IEC 61000-3-2

Flicker

EN 61000-3-3, IEC 61000-3-3

Management

IMC - Intelligent Management Center; command-line interface; Web browser; SNMP Manager; Telnet; HTTPS; RMON1; FTP

Notes

The customer must order power supply, as the device does not come with a PSU. At least one JC680A or JC681A is required

Services

QuickSpecs

HP 5820 Switch Series

Technical Specifications

DA - 13791 North America — Version 18 — November 22, 2013

Page 24

Page 25

(U4D06E) 1-year, 24x7 software phone support, software updates + 4 hour hardware exchange (U0S83E) 3-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange (U4D57E) 3-year, 24x7 software phone support, software updates + 4 hour Hardware Exchange (U0T34E) 4-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange (U4E08E) 4-year, 24x7 software phone support, software updates + 4 hour Hardware Exchange (U0T85E) 5-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange (U0S32E) 5-year, 24x7 software phone support, software updates + 4 hour Hardware Exchange (U0U36E)

Refer to the HP website at:

www.hp.com/networking/services

for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local HP sales office.

Standards and protocols

(applies to all products in series)

General protocols

IEEE 802.1ag Service Layer OAM IEEE 802.1D MAC Bridges IEEE 802.1p Priority IEEE 802.1Q VLANs IEEE 802.1s (MSTP) IEEE 802.1v VLAN classification by Protocol and Port IEEE 802.1w Rapid Reconfiguration of Spanning Tree IEEE 802.3ad Link Aggregation Control Protocol (LACP) IEEE 802.3ae 10-Gigabit Ethernet IEEE 802.3x Flow Control RFC 768 UDP RFC 792 ICMP RFC 793 TCP RFC 826 ARP RFC 854 TELNET RFC 925 Multi-LAN Address Resolution RFC 951 BOOTP RFC 1058 RIPv1 RFC 1350 TFTP Protocol (revision 2) RFC 1519 CIDR RFC 1542 BOOTP Extensions RFC 2131 DHCP RFC 2453 RIPv2 RFC 3046 DHCP Relay Agent Information Option RFC 3576 Ext to RADIUS (CoA only) RFC 3768 VRRP RFC 4675 RADIUS VLAN & Priority RFC3323 A Privacy Mechanism for the Session Initiation Protocol (SIP)

802.1r - GARP Proprietary Attribute Registration Protocol (GPRP)

IP multicast

RFC 4443 ICMPv6 RFC 4541 IGMP & MLD Snooping Switch RFC 4861 IPv6 Neighbor Discovery RFC 4862 IPv6 Stateless Address Auto-configuration

MIBs

IEEE8021-PAE-MIB IEEE8023-LAG-MIB RFC 1213 MIB II RFC 1493 Bridge MIB RFC 1657 BGP-4 MIB RFC 1724 RIPv2 MIB RFC 1850 OSPFv2 MIB RFC 2011 SNMPv2 MIB for IP RFC 2013 SNMPv2 MIB for UDP RFC 2233 Interface MIB RFC 2273 SNMP-NOTIFICATION-MIB RFC 2452 IPV6-TCP-MIB RFC 2454 IPV6-UDP-MIB RFC 2465 IPv6 MIB RFC 2466 ICMPv6 MIB RFC 2571 SNMP Framework MIB RFC 2572 SNMP-MPD MIB RFC 2573 SNMP-Notification MIB RFC 2618 RADIUS Client MIB RFC 2620 RADIUS Accounting MIB RFC 2665 Ethernet-Like-MIB RFC 2674 802.1p and IEEE 802.1Q Bridge MIB RFC 2688 MAU-MIB RFC 2787 VRRP MIB RFC 2819 RMON MIB RFC 2925 Ping MIB RFC 3414 SNMP-User based-SM MIB RFC 3415 SNMP-View based-ACM MIB RFC 3418 MIB for SNMPv3 RFC 3621 Power Ethernet MIB

QuickSpecs

HP 5820 Switch Series

Technical Specifications

DA - 13791 North America — Version 18 — November 22, 2013

Page 25

Page 26

RFC 2934 Protocol Independent Multicast MIB for IPv4 RFC 3376 IGMPv3 (host joins only) RFC 3618 Multicast Source Discovery Protocol (MSDP) RFC 3973 Draft 2 PIM Dense Mode RFC 4601 Draft 10 PIM Sparse Mode

IPv6

RFC 2080 RIPng for IPv6 RFC 2460 IPv6 Specification RFC 2710 Multicast Listener Discovery (MLD) for IPv6 RFC 2740 OSPFv3 for IPv6 RFC 2925 Remote Operations MIB (Ping only) RFC 3019 MLDv1 MIB RFC 3162 RADIUS and IPv6 RFC 3315 DHCPv6 (client and relay) RFC 3315 DHCPv6 (client only) RFC 3810 MLDv2 (host joins only) RFC 4022 MIB for TCP RFC 4251 SSHv6 Architecture RFC 4252 SSHv6 Authentication RFC 4253 SSHv6 Transport Layer RFC 4254 SSHv6 Connection RFC 4293 MIB for IP RFC 4419 Key Exchange for SSH

RFC 3826 AES for SNMP's USM MIB RFC 4133 Entity MIB (Version 3) LLDP-EXT-DOT1-MIB LLDP-EXT-DOT3-MIB LLDP-MIB

Network management

IEEE 802.1AB Link Layer Discovery Protocol (LLDP) RFC 2819 Four groups of RMON: 1 (statistics), 2 (history), 3 (alarm) and 9 (events) RFC 3176 sFlow ANSI/TIA-1057 LLDP Media Endpoint Discovery (LLDP-MED) SNMPv1/v2c/v3

OSPF

RFC 2328 OSPFv2 RFC 3101 OSPF NSSA

Security

IEEE 802.1X Port Based Network Access Control RFC 1492 TACACS+ RFC 2865 RADIUS (client only) RFC 2866 RADIUS Accounting Secure Sockets Layer (SSL) SSHv2 Secure Shell

QuickSpecs

HP 5820 Switch Series

Technical Specifications

DA - 13791 North America — Version 18 — November 22, 2013

Page 26

Page 27

HP 5820 Switch Series accessories

Transceivers

HP X124 1G SFP LC LH40 1310nm Transceiver

JD061A

HP X120 1G SFP LC LH40 1550nm Transceiver

JD062A

HP X125 1G SFP LC LH70 Transceiver

JD063B

HP X120 1G SFP RJ45 T Transceiver

JD089B

HP X120 1G SFP LC SX Transceiver

JD118B

HP X120 1G SFP LC LX Transceiver

JD119B

HP X130 SFP+ LC SR Transceiver

JD092B

HP X130 SFP+ LC LRM Transceiver

JD093B

HP X130 SFP+ LC LR Transceiver

JD094B

HP X130 10G SFP+ LC ER 40km Transceiver

JG234A

HP X240 10G SFP+ to SFP+ 0.65m Direct Attach Copper Cable

JD095C

HP X240 10G SFP+ to SFP+ 1.2m Direct Attach Copper Cable

JD096C

HP X240 10G SFP+ to SFP+ 3m Direct Attach Copper Cable

JD097C

HP X240 10G SFP+ to SFP+ 5m Direct Attach Copper Cable

JG081C

HP X240 10G SFP+ SFP+ 7m Direct Attach Copper Cable

JC784C

Power Supply

HP 5800 300W AC Power Supply

JC087A

HP 5800 300W DC Power Supply

JC090A

HP RPS1600 Redundant Power System

JG136A

HP RPS1600 1600W AC Power Supply

JG137A

Appliance

HP 5820 VPN Firewall Module

JD255A

HP 5820-14XG-SFP+ Switch with 2 Slots (JC106A)

HP 5820 4-port 8/4/2 Gbps FCoE SFP+ Module

JC530A

HP 5800 4-port 10GbE SFP+ Module

JC091A

HP 5800 2-port 10GbE SFP+ Module

JC092B

HP 5800 2RU Spare Fan Assembly

JC096A

HP 5820 VPN Firewall Module

JD255A

HP 5820X-24XG-SFP+ Switch (JC102A)

HP 5800 1RU Spare Fan Assembly

JC098A

HP 5820AF-24XG Switch (JG219A)

HP 58x0AF 650W AC Power Supply

JC680A

HP 58x0AF 650W DC Power Supply

JC681A

HP 58x0AF Back (power side) to Front (port side) Airflow Fan Tray

JC682A

HP 58x0AF Front (port side) to Back (power side) Airflow Fan Tray

JC683A

Additional HP Storage Options

Converged Network Adapters (CNAs)

HP CN1100E Dual Port Converged Network Adapter

BK835A

HP CN1000E Dual Port Converged Network Adapter

AW520A

NOTE:

Please visit the HP Converged Network Adapter QuickSpecs at:

www.hp.com/go/cna

QuickSpecs

HP 5820 Switch Series

Accessories

DA - 13791 North America — Version 18 — November 22, 2013

Page 27

Page 28

NOTE:

Details are not available for all accessories. The following specifications were available at the time of publication.

HP X124 1G SFP LC LH40 1310nm Transceiver

(JD061A)

A small form-factor pluggable SFP Gigabit LH40 transceiver that provides a full duplex Gigabit solution up to 40km on a singlemode fiber.

Ports

1 LC 1000Base-LH port (no IEEE standard exists for 1550 nm optics)

Connectivity

Connector type

Wavelength

1310 nm

Physical characteristics

Dimensions

2.17(d) x 0.6(w) x 0.46(h) in. (5.51 x 1.52 x 1.17 cm)

Full configuration weight

0.04 lb. (0.02 kg)

Electrical characteristics

Power consumption typical

0.8 W

Power consumption maximum

1.0 W

Cabling

Cable type: Single-mode fiber optic, complying with ITU-T G.652;

Maximum distance:

40km distance

Fiber type

Single Mode

Services

Refer to the HP website at

www.hp.com/networking/services

for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local HP sales office.

HP X120 1G SFP LC LH40 1550nm Transceiver

(JD062A)

A small form-factor pluggable (SFP) Gigabit LH40 transceiver that provides a full-duplex Gigabit solution up to 40 km on a single mode fiber.

Ports

1 LC 1000BASE-LH port (no IEEE standard exists for 1550 nm optics)

Connectivity

Connector type

Wavelength

1550 nm

Physical characteristics

Dimensions

2.17(d) x 0.6(w) x 0.46(h) in. (5.51 x 1.52 x 1.17 cm)

Full configuration weight

0.04 lb. (0.02 kg)

Electrical characteristics

Power consumption typical

0.8 W

Power consumption maximum

1.0 W

Cabling

Cable type: Single-mode fiber optic, complying with ITU-T G.652;

Maximum distance:

40km distance

Fiber type

Single Mode

Services

Refer to the HP website at

www.hp.com/networking/services

for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local HP sales office.

QuickSpecs

HP 5820 Switch Series

Accessory Product Details

DA - 13791 North America — Version 18 — November 22, 2013

Page 28

Page 29

HP X125 1G SFP LC LH70 Transceiver

(JD063B)

A small form-factor pluggable (SFP) Gigabit LH70 transceiver that provides a full-duplex Gigabit solution up to 70km on a single-mode fiber.

Ports

1 LC 1000BASE-LH port (no IEEE standard exists for 1550 nm optics)

Connectivity

Connector type

Wavelength

1550 nm

Physical characteristics

Dimensions

2.17(d) x 0.6(w) x 0.46(h) in. (5.51 x 1.52 x 1.17 cm)

Full configuration weight

0.04 lb. (0.02 kg)

Electrical characteristics

Power consumption typical

0.8 W

Power consumption maximum

1.0 W

Cabling

Cable type: Single-mode fiber optic, complying with ITU-T G.652;

Maximum distance:

• 70km Fiber type

Single Mode

Services

Refer to the HP website at

www.hp.com/networking/services

for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local HP sales office.

HP X125 1G SFP RJ45 T Transceiver (JD089B)

A small form factor pluggable (SFP) Gigabit 1000Base-T transceiver that provides a full duplex Gigabit solution up to 100m on a Cat-5+ cable.

Ports

1 RJ-45 1000BASE-T port (IEEE 802.3ab Type 1000BASE-T)

Connectivity

Connector type

RJ-45

Physical characteristics

Dimensions

2.71(d) x 0.54(w) x 0.55(h) in. (6.88 x 1.37 x 1.4 cm)

Full configuration weight

0.07 lb. (0.03 kg)

Electrical characteristics

Power consumption typical

0.8 W

Power consumption maximum

1.0 W

Cabling

Cable type: 1000BASE-T: Category 5 (5E or better recommended), 100 Ù differential 4pair unshielded twisted pair (UTP) or shielded twisted pair (STP) balanced, complying with IEEE 802.3ab 1000BASE-T;

Maximum distance:

• 100m

Services

Refer to the HP website at:

www.hp.com/networking/services

for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local HP sales office.

QuickSpecs

HP 5820 Switch Series

Accessory Product Details

DA - 13791 North America — Version 18 — November 22, 2013

Page 29

Page 30

HP X120 1G SFP LC SX Transceiver

(JD118B)

A small form-factor pluggable (SFP) Gigabit SX transceiver that provides a full-duplex Gigabit solution up to 550m on a Multimode fiber.

Ports

1 LC 1000BASE-SX port

Connectivity

Connector type

Wavelength

850 nm

Physical characteristics

Dimensions

2.17(d) x 0.6(w) x 0.46(h) in. (5.51 x 1.52 x 1.17 cm)

Full configuration weight

0.04 lb. (0.02 kg)

Electrical characteristics

Power consumption typical

0.8 W

Power consumption maximum

1.0 W

Cabling

Maximum distance:

• FDDI Grade distance = 220m

• OM1 = 275m

• OM2 = 500m

• OM3 = Not Specified by standard Cable length

up to 550m

Fiber type

Multi Mode

Services

Refer to the HP website at

www.hp.com/networking/services

for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local HP sales office.

HP X120 1G SFP LC LX Transceiver

(JD119B)

A small form-factor pluggable (SFP) Gigabig LX transceiver that provides a full duplex Gigabit solution up to 550m on MMF or 10Km on SMF

Ports

1 SFP 1000BASE-LX port (IEEE 802.3z Type 1000BASE-LX)

Connectivity

Connector type

Wavelength

1300 nm

Physical characteristics

Dimensions

2.17(d) x 0.6(w) x 0.46(h) in. (5.51 x 1.52 x 1.17 cm)

Full configuration weight

0.04 lb. (0.02 kg)

Electrical characteristics

Power consumption typical

0.8 W

Power consumption maximum

1.0 W

Cabling

Cable type: Either single mode or multimode;

Maximum distance:

• 550m for Multimode

• 10km for Singlemode Fiber type

Both

Services

Refer to the HP website at

www.hp.com/networking/services

for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local HP sales office.

QuickSpecs

HP 5820 Switch Series

Accessory Product Details

DA - 13791 North America — Version 18 — November 22, 2013

Page 30

Page 31

HP RPS1600 Redundant Power System

(JG136A)

Ports

8 redundant power supply ports Restrictions: two -56V/25A DC(PoE); six -56V/8A DC(non-PoE)

Physical characteristics

Dimensions

15.63(d) x 17.32(w) x 1.74(h) in. (39.7 x 44 x 4.42 cm)

Weight

14.11 lb. (6.4 kg)

Full configuration weight

16.75 lb. (7.6 kg)

Environment

Operating temperature

14°F to 122°F (-10°C to 50°C)

Operating relative humidity

5% to 95%

Nonoperating/Storage temperature

-40°F to 158°F (-40°C to 70°C)

Nonoperating/Storage relative humidity

5% to 95%

Altitude

up to 13,123 ft. (4 km)

Acoustic

Pressure: 53 dB; ISO 7779, ISO 9296

Electrical characteristics

Voltage

100-120/200-240 VAC

Current

30/60 A

Idle power

38 W

Maximum power rating

3550 W

RPS power

3200 W

PoE power

2800 W

RPS

-55 V

PoE

-55 V

Frequency

50/60 Hz

Notes

Idle power is the actual power consumption of the device with no ports connected. Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated. With one RPS1600 Power Supply, the PRS1600 Redundant Power System can provide 1600W power output; With two PRS1600 Power Supplies, the output power is 3200W.

Safety

CE Labeled; UL 60950-1; IEC 60950-1; ICES-003; FCC Part 15, Subpart B; EU RoHS Compliant; EN 60950-1/A11; C-Tick; VCCI Class A; ROHS Compliance; EN 300386

Services

Refer to the HP website at:

www.hp.com/networking/services

for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local HP sales office.

QuickSpecs

HP 5820 Switch Series

Accessory Product Details

DA - 13791 North America — Version 18 — November 22, 2013

Page 31

Page 32

HP RPS1600 1600W AC Power Supply

(JG137A)

Physical characteristics

Dimensions

8.19(d) x 4.96(w) x 1.63(h) in. (20.8 x 12.6 x 4.15 cm)

Weight

3.02 lb. (1.37 kg)

Environment

Operating temperature

14°F to 122°F (-10°C to 50°C)

Operating relative humidity

5% to 95%

Nonoperating/Storage temperature

-40°F to 158°F (-40°C to 70°C)

Nonoperating/Storage relative humidity

5% to 95%

Electrical characteristics

Voltage

100-120/200-240 VAC

Current

15/30 A

Maximum power rating

1600 W

Frequency

50/60 Hz

Notes

Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated.

Services

Refer to the HP website at:

www.hp.com/networking/services

for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local HP sales office.

HP 5800 VPN Firewall Module

(JD255A)

Ports

2 RJ-45 auto-negotiating 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T)

2 dual-personality ports; auto-sensing 10/100/1000Base-T or SFP 1 RJ-45 serial console port 1 Compact Flash port

Physical characteristics

Dimensions

9.84(d) x 9.84(w) x 14.45(h) in. (25 x 25 x 36.7 cm)

Weight

7.72 lb. (3.5 kg)

Environment

Operating temperature

32°F to 113°F (0°C to 45°C)

Operating relative humidity

10% to 95%, noncondensing

Management

IMC - Intelligent Management Center; command-line interface; Web browser; SNMP Manager; Telnet; HTTPS; RMON1; FTP

Features

Performance

- 6.5Gbps Firewall Throughput

- 1.8M Concurrent connection

- 50K New connection per second

- Max 20480 security policies

- 2Gbps 3DES/AES VPN Throughput

- 5000 IPSec tunnel

QuickSpecs

HP 5820 Switch Series

Accessory Product Details

DA - 13791 North America — Version 18 — November 22, 2013

Page 32

Page 33

- 4K VLAN Firewall operation mode

- Routing mode

- Transparent mode

- Hybrid mode AAA service

- Local Authentication

- Standard Radius

- HWTACACS+

- RADIUS domain Authentication ASPF

- General TCP / UDP application

- FTP/SMTP/HTTP/RTSP/H323 Protocol State Detection

- SIP/MGCP/QQ/MSN Protocol State Detection

- Java/ActiveX Blocking and Detection

- Port mapping

- Support for the fragmented packets Virtualization

- 256 Virtual Firewall

- 4 default Security Zone

- Max 256 Security Zone NAT

- NAPT

- PAT

- NAT Server

- Port mapping

- Bidirectional NAT

- Static NAT Network Security

- Add blacklist by hand or automatically

- IP+MAC Binding

- ARP Reverse Query

- ARP Cheat Check

- Management ports closed by default DDOS

- DNS Query Flood

- SYN Flood

- Auto start TCP Proxy when Detect SYN Flood

- ICMP Flood

- UDP Flood

- IP Spoofing

- SQL injection filter L2TP VPN

- LNS,LAC

- L2TP Multi-instance GRE

- GRE tunneling protocol IPSec

- AH/ESP

- ESP

- Transport/tunnel

QuickSpecs

HP 5820 Switch Series

Accessory Product Details

DA - 13791 North America — Version 18 — November 22, 2013

Page 33

Page 34

- NAT traversal

- Strategy template IKE

- DH

- Pre-share Key authentication-method

- Support aggressive mode and main exchange mode

- IKE DPD, PKI / CA Network Feature

- 802.1q VLAN

- 4K sub-interface

- Static and dynamic ARP

- Multicast, PIM

- IGMP v1/v2/v3 Routing

- RIP

- OSPF

- BGP

- Static Route

- policy Route High Availability

- Active/Active mode

- Active/Passive mode

- Session Synchronization for Firewall System management

- Web Management support IE/Firefox

- Command line interface (Console/Telnet/SSH)

- Classification Manager

- Unified management through iMC

- SNMPv1/v2c/v3 Administration

- Software Upgrades

- Configuration Backup and Restore Logging/Monitoring

- Syslog

- Mini RMON

- NTP

- NAT/ASPF/firewall log stream(Binary log) IPv6 Routing & Multicast

- RIPng

- OSPFv3

- BGP4+

- Static Route

- Policy Route

- PIM-SM/DM IPv6 Security

- NAT-PT

- Manual tunnel

- IPV6 OVER ipv4 GRE tunnel

- 6to4 tunnel (RFC3056)

- ISATAP Tunnel

- IPv6 Packet Filter

QuickSpecs

HP 5820 Switch Series

Accessory Product Details

DA - 13791 North America — Version 18 — November 22, 2013

Page 34

Page 35

- Radius

- NAT64

Services

3-year, parts only, global next-day advance exchange (UZ914E) 3-year, 4-hour onsite, 13x5 coverage for hardware (UZ915 ) 3-year, 4-hour onsite, 24x7 coverage for hardware (UZ918E) 3-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 SW phone support and SW updates (UZ922E) 3-year, 24x7 SW phone support, software updates (UZ925E) 4-year, 4-hour onsite, 13x5 coverage for hardware (UZ916E) 4-year, 4-hour onsite, 24x7 coverage for hardware (UZ919E) 4-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UZ923E) 4-year, 24x7 SW phone support, software updates (UZ926E) 5-year, 4-hour onsite, 13x5 coverage for hardware (UZ917E) 5-year, 4-hour onsite, 24x7 coverage for hardware (UZ920E) 5-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UZ924E) 5-year, 24x7 SW phone support, software updates (UZ927E) 3 Yr 6 hr Call-to-Repair Onsite (UZ928E) 4 Yr 6 hr Call-to-Repair Onsite (UZ929E) 5 Yr 6 hr Call-to-Repair Onsite (UZ930E)

Refer to the HP website at:

www.hp.com/networking/services

for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local HP sales office.

Standards and protocols

IPv6

RFC 1981 IPv6 Path MTU Discovery RFC 2460 IPv6 Specification RFC 2465 Management Information Base for IP Version 6: Textual Conventions and General Group(partially support, only "IPv6 Interface Statistics table") RFC 3484 Default Address Selection for IPv6 RFC 3513 IPv6 Addressing Architecture RFC 3587 IPv6 Global Unicast Address Format RFC 4007 IPv6 Scoped Address Architecture RFC 4862 IPv6 Stateless Address Auto-configuration

Security

RFC 1321 The MD5 Message-Digest Algorithm RFC 1334 PPP Authentication Protocols (PAP) RFC 1994 PPP Challenge Handshake Authentication Protocol (CHAP) RFC 2104 Keyed-Hashing for Message Authentication RFC 2138 RADIUS Authentication RFC 2618 RADIUS Authentication Client MIB RFC 2620 RADIUS Accounting Client MIB RFC 2716 PPP EAP TLS Authentication Protocol RFC 2865 RADIUS Authentication RFC 2866 RADIUS Accounting RFC 2867 RADIUS Accounting Modifications for Tunnel Protocol Support

RFC 2405 The ESP DES-CBC Cipher Algorithm With Explicit IV RFC 2406 IP Encapsulating Security Payload (ESP) RFC 2410 The NULL Encryption Algorithm and Its Use With IPsec RFC 2411 IP Security Document Roadmap RFC 2451 The ESP CBC-Mode Cipher Algorithms RFC 2473 Generic Packet Tunneling in IPv6 Specification RFC 2529 Transmission of IPv6 over IPv4 Domains without Explicit Tunnels RFC 2661 Layer Two Tunneling Protocol "L2TP" RFC 2784 Generic Routing Encapsulation (GRE) RFC 2868 RADIUS Attributes for Tunnel Protocol Support RFC 2893 Transition Mechanisms for IPv6 Hosts and Routers RFC 3602 The AES-CBC Cipher Algorithm and Its Use with IPsec RFC 4214 Intra-Site Automatic Tunnel Addressing Protocol (ISATAP)

IKEv1

RFC 2407 The Internet IP Security Domain of Interpretation for ISAKMP RFC 2408 Internet Security Association and Key Management Protocol (ISAKMP). RFC 2409 The Internet Key Exchange (IKE)

QuickSpecs

HP 5820 Switch Series

Accessory Product Details

DA - 13791 North America — Version 18 — November 22, 2013

Page 35

Page 36

RFC 2868 RADIUS Attributes for Tunnel Protocol Support RFC 2869 RADIUS Extensions draft-grant-tacacs-02 (TACACS)

VPN

RFC 1701 Generic Routing Encapsulation (GRE) RFC 1702 Generic Routing Encapsulation over IPv4 networks. RFC 1828 IP Authentication using Keyed MD5 RFC 1829 The ESP DES-CBC Transform RFC 1853 IP in IP Tunneling RFC 2085 HMAC-MD5 IP Authentication with Replay Prevention RFC 2401 Security Architecture for the Internet Protocol RFC 2402 IP Authentication Header RFC 2403 The Use of HMAC-MD5-96 within ESP and AH RFC 2404 The Use of HMAC-SHA-1-96 within ESP and AH

RFC 2412 The OAKLEY Key Determination Protocol RFC 3526 More Modular Exponential (MODP) Diffie-Hellman groups for Internet Key Exchange (IKE) RFC 3706 A Traffic-Based Method of Detecting Dead Internet Key Exchange (IKE) Peers

PKI

RFC 2510 Internet X.509 Public Key Infrastructure Certificate Management Protocols RFC 2511 Internet X.509 Certificate Request Message Format RFC 3279 Algorithms and Identifiers for the Internet X.509 Public Key Infrastructure Certificate and Certificate Revocation List (CRL) Profile RFC 3280 Internet X.509 Public Key Infrastructure Certificate and Certificate Revocation List (CRL) Profile draft-nourse-scep-06: PKCS#1 PKCS#10 PKCS#12 PKCS#7

HP 5820 4-port 8/4/2 Gbps FCoE SFP+ Module

(JC530A)

Physical characteristics

Dimensions

8.27(d) x 6.3(w) x 1.46(h) in. (21 x 16 x 3.7 cm)

Weight

1.65 lb. (0.75 kg)

Full configuration weight

2.76 lb. (1.25 kg)

Environment

Operating temperature

32°F to 113°F (0°C to 45°C)

Operating relative humidity

5% to 95%

Nonoperating/Storage temperature

-40°F to 158°F (-40°C to 70°C)

Nonoperating/Storage relative humidity

5% to 95%

Shock and vibration

halt 30g rms

Altitude

up to 13,123 ft. (4 km)

Notes

FCoE Features

• FCoE Compliance: Fibre Channel on Ethernet (FC-BB-5)/ IETF RFC 3643 draft standard

• FCoE Support: FIP FCoE initialization protocol/ FIP snooping/ Auto negotiation, full-duplex FC operation/ NPIV transparent connections to FC fabrics

• Ethernet Interface Compliance/Support: 10Gbps XAUI ports x 4 (internal)/ ETS - Enhanced transmission Selection (802.1Qaz)/ PFC - Class-based Flow Control (802.1Qbb)/ DCBX (802.1Qbb)

• Electrical: Connected and Activity LED controls in Ethernet mode

• Fibre Channel Standards: Physical Interface (FC-PI-3)/ Line Services (FC LS)/

QuickSpecs

HP 5820 Switch Series

Accessory Product Details

DA - 13791 North America — Version 18 — November 22, 2013

Page 36

Page 37

Framing & Signaling (FC-FS-2)/ Virtual Interface Architecture Mapping (FC-VI)

• Fibre Channel Standards Continued.: Fabric Element MIB Specification (RFC

2837)/ Fibre Alliance MIB Specification (Version 4.0)/ Methodologies for Interconnects (FC-MI-2)/ Device Attach (FC-DA)

• Fibre Channel Classes of Service: Class 2/ Class 3/ Class F (inter-switch frames) connectionless Fibre Channel protocol support

• NPIV support:FC-DA-2/ FC-MT/ FC-FS clause 5.2.41/ FC-LS table 141 clause

5.2.41/ 04-075v0/ 03-184v1/ 03-046

• External Customer Interfaces: Four external SFP+ Flex Ports which configure to assume either of the following identities/ 10 Gigabit Converged Enhanced Ethernet (CEE)/ 8/4/2 Gbps Fibre Channel

• External Customer Interfaces Continued: RJ-45 Ethernet management port/ Unit power and system status LEDs/ Port login and activity LEDs/Recessed reset switch

• Media Support - Fibre Channel: Hot-pluggable/ 3.3 volt 8Gb SFP+ transceivers/ Also compatible with 4-Gbps and 2-Gbps SFPs/ Shortwave/ longwave optical

• Media Support - Ethernet: Hot-pluggable, 3.3 volt 10 Gigabit SFP+ transceivers/ TwinAx copper cables

• Other Features: SMI-S 1.1 support in firmware/ SAN boot support/Advanced Security (RADIUS, SSH, SSL)

• Diagnostics: Telnet/ Web browser interface/ SNMP (status only)/ Telnet/ CLI/ Web browser interface/ API interface

• Software/ Firmware Management Interfaces: Simple Network Management Protocol (SNMP)/ Management Information Base (MIB)/ CIM Provider/ Telnet/ CLI/Web Browser Management Interface/ API Interface

• Safety: USA/ Canada/ EU/ Australia/ New Zealand/ China

Services

3-year, 4-hour onsite, 13x5 coverage for hardware (UY943E ) 3-year, 4-hour onsite, 24x7 coverage for hardware (UY946E ) 3-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 SW phone support and SW updates (UY950E ) 3-year, 24x7 SW phone support, software updates (UY953E ) 1-year, post-warranty, 4-hour onsite, 13x5 coverage for hardware (HR770E) 1-year, post-warranty, 4-hour onsite, 24x7 coverage for hardware (HR771E) 1-year, post-warranty, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone support (HR772E) 4-year, 4-hour onsite, 13x5 coverage for hardware (UY944E ) 4-year, 4-hour onsite, 24x7 coverage for hardware (UY947E ) 4-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UY951E ) 4-year, 24x7 SW phone support, software updates (UY954E ) 5-year, 4-hour onsite, 13x5 coverage for hardware (UY945E ) 5-year, 4-hour onsite, 24x7 coverage for hardware (UY948E ) 5-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UY952E ) 5-year, 24x7 SW phone support, software updates (UY955E ) 3 Yr 6 hr Call-to-Repair Onsite (UY956E ) 4 Yr 6 hr Call-to-Repair Onsite (UY957E ) 5 Yr 6 hr Call-to-Repair Onsite (UY958E ) 1-year, 6 hour Call-To-Repair Onsite for hardware (HR774E) 1-year, 24x7 software phone support, software updates (HR773E)

QuickSpecs

HP 5820 Switch Series

Accessory Product Details

DA - 13791 North America — Version 18 — November 22, 2013

Page 37

Page 38

Refer to the HP website at:

www.hp.com/networking/services

for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local HP sales office.

HP 5800 Access Controller Module for 64–256 Access Points

(JD441A)

Ports

1 RJ-45 out-of-band management port

Physical characteristics

Dimensions

9.57(d) x 9.84(w) x 1.38(h) in. (24.3 x 25 x 3.5 cm)

Weight

3.64 lb. (1.65 kg)

Memory and processor

Processor

Eight core @ 1000 MHz, 1 GB compact flash, 2 GB DDR2 SDRAM

Performance

Switch fabric speed

8 Gbps

MAC address table size

8,000 entries

Environment

Operating temperature

32°F to 113°F (0°C to 45°C)

Operating relative humidity

5% to 95%, non-condensing

Non-operating/Storage temperature

-40°F to 158°F (-40°C to 70°C)

Non-operating/Storage relative humidity

5% to 95%, non-condensing

Electrical characteristics

Maximum heat dissipation

273 BTU/hr (288.02 kJ/hr)

Maximum power rating

80 W

Safety

UL 60950-1; EN 60950-1; CAN/CSA-C22.2 No. 60950-1; Anatel; GOST; C-Tick; NOM; IEC 60950-1(with CB report)

Emissions

EN 55022; VCCI; ICES-003; AS/NZS CISPR 22; EN 300 386; FCC Part 15; EN 61000-3-2:2006; EN 61000-33:1995 +A1:2001+A2:2005; EMC Directive 2004/108/EC

Immunity

EN 61000-4-2:1995+A1:1998+A2:2001; EN 61000-4-3:2006; EN 61000-44:2004; EN 61000-4-5:2006; EN 61000-4-6: 1996 +A1:2001:A2:2007; EN 61000-4-8:2001; EN 61000-4-11:2004; EN 55024:1998+ A1:2001 + A2:2003

Management

IMC - Intelligent Management Center; command-line interface; Web browser; configuration menu; SNMP Manager; Telnet; HTTPS; RMON1; FTP; in-line and out-of-band; IEEE 802.3 Ethernet MIB; Ethernet Interface MIB

Notes

Max. number of users: 4K. Max. number of users that are supported by local authentication: 1K. Max. number of SSIDs that can be configured: 256. Max. number of users that are supported by local portal authentication: 2K. Number of ACLs: 8K.

Services

Refer to the HP website at:

www.hp.com/networking/services

for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local HP sales office.

Standards and protocols

General protocols

RFC 768 UDP RFC 791 IP RFC 792 ICMP RFC 793 TCP RFC 826 ARP

MIBs

RFC 1229 Interface MIB Extensions RFC 1643 Ethernet MIB RFC 1757 Remote Network Monitoring MIB RFC 2011 SNMPv2 MIB for IP RFC 2012 SNMPv2 MIB for TCP

QuickSpecs

HP 5820 Switch Series

Accessory Product Details

DA - 13791 North America — Version 18 — November 22, 2013

Page 38

Page 39

RFC 854 TELNET RFC 855 Telnet Option Specification RFC 858 Telnet Suppress Go Ahead Option RFC 894 IP over Ethernet RFC 950 Internet Standard Subnetting Procedure RFC 959 File Transfer Protocol (FTP) RFC 1122 Host Requirements RFC 1141 Incremental updating of the Internet checksum RFC 1144 Compressing TCP/IP headers for low-speed serial links RFC 1256 ICMP Router Discovery Protocol (IRDP) RFC 1321 The MD5 Message-Digest Algorithm RFC 1334 PPP Authentication Protocols (PAP) RFC 1350 TFTP Protocol (revision 2) RFC 1812 IPv4 Routing RFC 1944 Benchmarking Methodology for Network Interconnect Devices RFC 1994 PPP Challenge Handshake Authentication Protocol (CHAP) RFC 2104 HMAC: Keyed-Hashing for Message Authentication RFC 2246 The TLS Protocol Version 1.0 RFC 2284 EAP over LAN RFC 2644 Directed Broadcast Control RFC 2864 The Inverted Stack Table Extension to the Interfaces Group MIB RFC 2866 RADIUS Accounting RFC 2869 RADIUS Extensions RFC 3268 Advanced Encryption Standard (AES) Ciphersuites for Transport Layer Security (TLS) RFC 3619 Ethernet Automatic Protection Switching (EAPS) draft-ietf-capwap-protocol-specification-

00.txt:CAPW AP Protocol Specification draft-ohara-capwap-lwapp-03.txt:Light Weight Access Point Protocol

IP multicast

RFC 1112 IGMP RFC 2236 IGMPv2 RFC 2934 Protocol Independent Multicast MIB for IPv4

IPv6

RFC 1350 TFTP RFC 1881 IPv6 Address Allocation Management RFC 1887 IPv6 Unicast Address Allocation Architecture RFC 1981 IPv6 Path MTU Discovery

RFC 2013 SNMPv2 MIB for UDP RFC 2571 SNMP Framework MIB RFC 2572 SNMP-MPD MIB RFC 2613 SMON MIB RFC 2863 The Interfaces Group MIB RFC 2932IP (Multicast Routing MIB) RFC 2933 IGMP MIB

Mobility

IEEE 802.11a High Speed Physical Layer in the 5 GHz Band IEEE 802.11b Higher-Speed Physical Layer Extension in the 2.4 GHz Band IEEE 802.11d Global Harmonization IEEE 802.11g Further Higher Data Rate Extension in the 2.4 GHz Band IEEE 802.11i Medium Access Control (MAC) Security Enhancements IEEE 802.11n WLAN Enhancements for Higher Throughput

Network management

RFC 1155 Structure of Management Information RFC 1905 SNMPv2 Protocol Operations RFC 2573 SNMPv3 Applications RFC 2574 SNMPv3 User-based Security Model (USM) RFC 2575 VACM for SNMP SNMPv1/v2c

QoS/CoS

RFC 2474 DS Field in the IPv4 and IPv6 Headers RFC 2475 DiffServ Architecture RFC 3168 The Addition of Explicit Congestion Notification (ECN) to IP

Security

IEEE 802.1X Port Based Network Access Control RFC 3394 Advanced Encryption Standard (AES) Key Wrap Algorithm RFC 3579 RADIUS Support For Extensible Authentication Protocol (EAP) Access Control Lists (ACLs) Guest VLAN for 802.1x MAC Authentication Secure Sockets Layer (SSL) SSHv1.5 Secure Shell SSHv2 Secure Shell Web Authentication WPA (Wi-Fi Protected Access)/WPA2

QuickSpecs

HP 5820 Switch Series

Accessory Product Details

DA - 13791 North America — Version 18 — November 22, 2013

Page 39

Page 40

RFC 2292 Advanced Sockets API for IPv6 RFC 2373 IPv6 Addressing Architecture RFC 2375 IPv6 Multicast Address Assignments RFC 2460 IPv6 Specification RFC 2461 IPv6 Neighbor Discovery RFC 2462 IPv6 Stateless Address Auto-configuration RFC 2463 ICMPv6 RFC 2464 Transmission of IPv6 over Ethernet Networks RFC 2526 Reserved IPv6 Subnet Anycast Addresses RFC 2563 ICMPv6 RFC 2925 Definitions of Managed Objects for Remote Ping, Traceroute, and Lookup Operations (Ping only) RFC 3484 Default Address Selection for IPv6 RFC 3587 IPv6 Global Unicast Address Format RFC 4443 ICMPv6 RFC 4541 IGMP & MLD Snooping Switch RFC 4861 IPv6 Neighbor Discovery RFC 4862 IPv6 Stateless Address Auto-configuration RFC 5095 Deprecation of Type 0 Routing Headers in IPv6

IKEv1

RFC 3748 - Extensible Authentication Protocol (EAP)

To learn more, visit:

www.hp.com/networking

© Copyright 2010-2013 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.

QuickSpecs

HP 5820 Switch Series

Accessory Product Details

DA - 13791 North America — Version 18 — November 22, 2013

Page 40

HP JC106A, JC102A, JG219A, 5820-14XG-SFP+, 5820X-24XG-SFP+ Specification

Specifications and Main Features

Frequently Asked Questions

User Manual