
HP EliteDisplay E271i 27-inch IPS LED Backlit Monitor
Overview
DA – 14661 Worldwide — Version 3 — August 19, 2013
HP EliteDisplay E271i 27-inch IPS LED Backlit Monitor
Opens, selects or exits
the OSD menu.
If the OSD menu is on, press to select the highlighted menu item. If the
OSD menu is inactive, press to activate the auto adjustment feature to
optimize the screen image.
If the OSD menu is on,
press to navigate
backward through the
OSD menu and decrease
adjustment levels.
If the OSD menu is on,
press to navigate
forward through the OSD
menu and increase
adjustment levels.
If the OSD menu is
inactive, press to
activate the source
button that chooses the
video signal input (VGA,
DVI, or DisplayPort).
Turns the monitor on or off.
LED:
fully powered = white;
sleep mode = amber;
sleep timer mode = flashing amber.

HP EliteDisplay E271i 27-inch IPS LED Backlit Monitor
DA – 14661 Worldwide — Version 3 — August 19, 2013
1. Integrated USB 2.0 hub
Boost Productivity with Dual Monitor Work Solution
(Multi-monitor support depends on your PC capability. Monitors are sold separately.)

HP EliteDisplay E271i 27-inch IPS LED Backlit Monitor
Technical Specifications
DA – 14661 Worldwide — Version 4 — October 10, 2016
Viewable Image Area
(diagonal)
68,5 cm, (27 in.) widescreen; diagonally measured
Active Area (W x H)
59,8 x 33,6 cm, (23.5 x 13.3 in.)
Up to 178° horizontal/178° vertical (10:1 minimum contrast ratio)
Static Contrast Ratio
(typical)*
Dynamic Contrast Ratio
(typical)*
5,000,000:1
Response Time (typical)*
7ms w/overdrive (gray to gray)
Backlight Lamp Life
(to half brightness)*
30,000 hours minimum
Color Gamut (typical)*
Can display up to 16.7 million colors
*All performance specifications represent the typical specifications provided by HP's component
manufacturers; actual performance may vary either higher or lower.
** With the use of FRC technology.
On Screen Display
(OSD) Controls
Menu, Minus ("-"), Plus ("+") /Input Control, OK/Auto, Power
10 (English, Spanish, German, French, Italian, Netherlands, Portuguese,
Japanese, T-Chinese and S-Chinese)
Brightness, Contrast, Color, Image Control, OSD control, Management,
Language, Information, Factory Reset, Input Control
Signal Interface/
Performance
Preset VESA Graphic
Modes (non-interlaced)
1680 x 1050 @ 60 Hz
1600 x 900 @ 60 Hz
1440 x 900 @ 60 Hz
1366 x 768 @ 60 Hz
1280 x 1024 @ 60 Hz
1280 x 800 @60 Hz
1280 x 720 @ 60 Hz
1024 x 768 @ 60 Hz
800 x 600 @ 60 Hz
720 x 400 @ 70 Hz
640 x 480 @ 60Hz
Maximum Pixel Clock
Speed
Default Color
Temperature
Video/Other Inputs
Plug and Play
VGA (analog), DVI-D, DisplayPort 1.2 (HDCP support on DVI-D and DisplayPort)

HP EliteDisplay E271i 27-inch IPS LED Backlit Monitor
DA – 14661 Worldwide — Version 4 — October 10, 2016
Integrated USB 2.0 hub with (2) Downstream and (1) Upstream ports
(1)USB cable, 2 m (6.5 ft)
(1)VGA, (1)DisplayPort
APJ Specific: (1)VGA and (1)DVI-D cables are included. DisplayPort cable is
only available on limited models and in limited countries.
VGA 1,8 m (5.9 ft); DisplayPort 2 m (6.5 ft)
APJ specific: DVI-D 2 m (6.5 ft) (see APJ specific note above)
Typical Power
Consumption
64,2 x 27,85 x 53,21 cm
(25.28 x 10.96 x 20.95 in)
Unpacked w/o stand
(head only)
64,2 x 5,22 x 38,73 cm
(25.28 x 2.06 x 15.25 in)
70,2 x 17,1 x 60 cm
(27.64 x 6.73 x 23.62 in)
27,85 x 13,07 cm
(10.96 x 5.14 in)
5° to 35° C (41° to 95° F)
Temperature - Nonoperating
-20° to 60° C (-4° to 140° F)
Humidity - Operating
20% to 80% non-condensing
5% to 95%, 38.7° C max wet-bulb
0 to 12,192 m (0 to 40,000 ft)
White LED Backlight
Arsenic-Free Display
Glass

HP EliteDisplay E271i 27-inch IPS LED Backlit Monitor
DA – 14661 Worldwide — Version 4 — October 10, 2016
Mercury- Free Display
Backlighting
Eco-Label Certifications
& Declarations
This product has received or is in the process of being certified to the
following approvals and may be labeled with one or more of these marks
IT ECO declaration
US ENERGY STAR®
TCO 06 and TCO Certified Edge
EPEAT® Gold where HP registers commercial display products. See
http://www.epeat.net for registration status in your country US
Federal Energy Management Program (FEMP)
Energy Consumption
(in accordance with US
Energy Star test
method)
* Heat dissipation is calculated based on the measured watts, assuming the service level is attained for
one hour.
This product is in compliance with the Restrictions of Hazardous
Substances (RoHS) directive - 2002/95/EC.
This HP product is designed to comply with the Waste Electrical and
Electronic Equipment (WEEE) Directive - 2002/96/EC.
This product is in compliance with California Proposition 65 (State of
California; Safe Drinking Water and Toxic Enforcement Act of 1986).
This product is in compliance with the IEEE 1680 (EPEAT) standard at
the Gold level, see http://www.epeat.net
Plastics parts weighing over 25 grams used in the product are
marked per ISO 11469 and ISO1043.
This product contains 15.2% post-consumer recycled plastic (by wt.)
This product is 98.5% recycle-able when properly disposed of at end
of life.
PLASTIC/EPS (Expanded
Polystyrene)
PLASTIC/EPE-Expanded
Polyethylene
Hewlett-Packard is committed to compliance with all applicable
environmental laws and regulations, including the European Union Restriction
of Hazardous Substances (RoHS) Directive. HP's goal is to exceed compliance

HP EliteDisplay E271i 27-inch IPS LED Backlit Monitor
DA – 14661 Worldwide — Version 4 — October 10, 2016
obligations by meeting the requirements of the RoHS Directive on a worldwide
basis. By July 1, 2006, RoHS substances will be virtually eliminated (virtually =
to levels below legal limits) for all HP electronic products subject to the RoHS
Directive, except where it is widely recognized that there is no technically
feasible alternative (as indicated by an exemption under the EU RoHS
Directive).
This product does not contain any of the following substances in excess of
regulatory limits (refer to the HP General Specification for the Environment at:
http://www.hp.com/hpinfo/globalcitizenship/environment/supplychain/
gen_specifications.html):
Asbestos
Certain Azo Colorants
Certain Brominated Flame Retardants - may not be used as flame
retardants in plastics
Cadmium
Chlorinated Hydrocarbons
Chlorinated Paraffins
Formaldehyde
Halogenated Diphenyl Methanes
Lead carbonates and sulfates
Lead and Lead compounds
Mercuric Oxide Batteries
Nickel - finishes must not be used on the external surface designed
to be frequently handled or carried by the user.
Ozone Depleting Substances
Polybrominated Biphenyls (PBBs)
Polybrominated Biphenyl Ethers (PBBEs)
Polybrominated Biphenyl Oxides (PBBOs)
Polychlorinated Biphenyl (PCB)
Polychlorinated Terphenyls (PCT)
Polyvinyl Chloride (PVC) - except for wires and cables, and certain
retail packaging has been voluntarily removed from most
applications.
Radioactive Substances
Tributyl Tin (TBT), Triphenyl Tin (TPT), Tributyl Tin Oxide (TBTO)
HP follows these guidelines to decrease the environmental impact of product
packaging:
Eliminate the use of heavy metals such as lead, chromium, mercury
and cadmium in packaging materials.
Eliminate the use of ozone-depleting substances (ODS) in packaging
materials.
Design packaging materials for ease of disassembly.
Maximize the use of post-consumer recycled content materials in
packaging materials.
Use readily recyclable packaging materials such as paper and
corrugated materials.
Reduce size and weight of packages to improve transportation fuel
efficiency.
Plastic packaging materials are marked according to ISO 11469 and

HP EliteDisplay E271i 27-inch IPS LED Backlit Monitor
DA – 14661 Worldwide — Version 4 — October 10, 2016
End-of-life
Management and
Recycling
Hewlett-Packard offers end-of-life HP product return and recycling programs
in many geographic areas. To recycle your product, please go to:
http://www.hp.com/go/reuse-recycle or contact your nearest HP sales office.
Products returned to HP will be recycled, recovered or disposed of in a
responsible manner.
The EU WEEE directive (2002/95/EC) requires manufacturers to provide
treatment information for each product type for use by treatment facilities.
This information (product disassembly instructions) is posted on the Hewlett
Packard web site at: http://www.hp.com/go/recyclers. These instructions may
be used by recyclers and other WEEE treatment facilities as well as HP OEM
customers who integrate and re-sell HP equipment.
Hewlett-Packard
Corporate
Environmental
Information
For more information about HP's commitment to the environment:
Global Citizenship Report
http://www.hp.com/hpinfo/globalcitizenship/gcreport/index.html
Eco-label certifications
http://www.hp.com/hpinfo/globalcitizenship/environment/productdesign/
ecolabels.html
ISO 14001 certificates:
http://www.hp.com/hpinfo/globalcitizenship/environment/operations/
envmanagement.html
Options
(sold separately)
HP LCD Monitor Quick
Release – Part number
EM870AA1
An easy-to-use, VESA-compliant, LCD monitor mounting solution that allows
you to quickly and securely attach an LCD monitor to a variety of stands,
brackets, arms or wall mounts. For more information, refer to this product's
QuickSpecs document.
HP USB Graphics
Adapter–Part number
NL571AA
Enables connection of up to six simultaneous displays to help you boost
productivity and multi-task across several open applications. Use one Adapter
to bridge between a notebook or desktop PC and second monitor or use
multiple Adapters to connect several displays to each other.
HP Business PC Security
Lock Kit–Part number
PV606AA
Attaches to the rear of the PC with a six-foot steel cable that can be used to
secure a PC or peripherals such as mice, keyboards, monitors or USB security
devices to protect them against unauthorized removal by physically
connecting the system to an anchor point.
HP LCD Speaker Bar –
Part number NQ576AA
Powered directly by the connected PC, the Speaker Bar seamlessly attaches to
the monitor's lower bezel to bring full audio support to select HP flat panel
monitors. Features include dual speakers with full sound range and dual
external headphone jacks. Sold separately. For more information, refer to the
product's QuickSpecs.
HP DVI to DVI cable –
Part number DC198A
Connect to external monitors with a DVI connector from an HP Compaq
Business Desktop computer with a DVI connector. The cable is a single link
cable with DVI-D support on both connectors. The cable will connect to either
a DVI-D or DVI-I connector on the monitor and the graphics card.
HP EliteDisplay E271i 27-inch IPS LED Backlit Monitor; VGA cable; DisplayPort
cable; USB cable; AC Power cable.
APJ Specific: (1)VGA and (1)DVI-D cables are included. DisplayPort cable is
only available on limited models and in limited countries.
Printed documentation and CD
Yes, HP Display Assistant

HP EliteDisplay E271i 27-inch IPS LED Backlit Monitor
DA – 14661 Worldwide — Version 4 — October 10, 2016
English, Arabic, S. Chinese, T. Chinese, Czech, Danish, Dutch, Finnish, French,
German, Greek, Hungarian, Italian, Japanese, Kazakh, Korean, Norwegian,
Polish, Brazilian Portuguese, Russian, Slovenian, Spanish, Swedish and
Turkish.
English, Arabic, S. Chinese, T. Chinese, Czech, Danish, Dutch, Finnish, French,
German, Greek, Hungarian, Italian, Japanese, Kazakh, Korean, Norwegian,
Polish, Brazilian Portuguese, Russian, Slovenian, Spanish, Swedish and
Turkish.
Yes (one set of standard 4-hole pattern, 100 mm)
Certification and
Compliance
Microsoft WHQL Certification (Windows 10), CE, CB ,KC, KCC, NOM, PSB, ICE, TUV-S, CCC, CEL Grade 1,
CECP, SEPA, TCO Certified Edge, EPA, ISC, VCCI ,FCC, Taiwan: BSMI , ENERGY STAR®, EPEAT® Gold3
Compatible with platforms using the VESA standard video modes. Recommended for use with HP
products.
Protected by HP, including a 3 year standard limited warranty. Optional Care Pack Services are extended
service contracts which go beyond your standard warranties.2
© Copyright 2016 HP Development Company, L.P.
ENERGY STAR® is a US registered mark of the United States Environmental Protection Agency.
1
The HP Quick Release has been designed to support a maximum of up to 24 lbs (10.9 kg) for all devices mounted. Because
mounting surfaces vary widely and the final mounting method and configuration may vary, mounting fasteners are not supplied
(other than the VESA-compliant screws). HP recommends that you consult with a qualified engineering, architectural or
construction professional to determine the appropriate type and quantity of mounting fasteners required for your application and
to ensure that your mounting solution is properly installed to support applied loads.
2
HP Care Pack Services extend service contracts beyond the standard warranties. Service levels and response times for HP Care
Packs may vary depending on your geographic location. Service starts from date of hardware purchase. To choose the right level
of service for your HP product, use the HP Care Pack Services Lookup Tool at http://www.hp.com/go/lookuptool. Additional HP
Care Pack Services information by product is available at http://www.hp.com/hps/carepack.
3
EPEAT® Gold registered models of this product are available where HP registers commercial display products. See
www.epeat.net for registration status in your country.
4
External power supplies, power cords, cables and peripherals are not Low Halogen. Service parts obtained after purchase may
not be Low Halogen.
All specifications represent the typical specifications provided by HP's component manufacturers; actual performance may vary
either higher or lower. The only warranties for HP products and services are set forth in the express warranty statements
accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not
be liable for technical or editorial errors or omissions contained herein.

HP EliteDisplay E271i 27-inch IPS LED Backlit Monitor
Summary of changes
DA – 14661 Worldwide — Version 4 — October 10, 2016
From v2 to v3 – 8/19/2013