HP DLT 80 User Manual

hp DLT 80

data protection for

medium to large

networks

The HP Surestore DLT 80 provides reliable data protection for midrange servers, with 80 GB compressed capacity per tape and a transfer rate of 43.2 GB/hour, minimizing your backup time and maximizing server availability. This high-capacity solution is designed for a 100% duty cycle to meet the most demanding backup requirements. Based on DLT technology, the DLT 80 includes additional reliability features such as advanced error detection and correction techniques, HP Library and Tape Tools for installation and troubleshooting, and Tapealert for monitoring drive and media.

hp DLT 80

•80 GB on a tape covers virtually any single backup operation.

•A transfer rate of 40 GB/hour keeps network downtime during backup to a minimum.

•Includes features that deliver extra reliability: advanced error detection and correction techniques, HP Library and Tape Tools for troubleshooting, and Tapealert, which monitors drive and media for potential problems.

•HP has tested and proved the compatibility of the DLT 80 across the HP server range as well as with other leading server brands, operating systems, and backup software (see www.hp.com/go/connect).

•Includes cables, rails, DLTtape IV data cartridge, cleaning cartridge, and TapeWare backup software for complete in-box solution.

•Comes in internal and external models, plus an offline hot-swappable model for use in a racked environment with HP’s Tape Array family.

•Three-year Express Exchange warranty.

•Supportpack warranty upgrade available.

40 GB native, typically 80 GB with hardware data compression* HP DLTtape IV data cartridge LVD/SE wide Ultra SCSI-2 6 MB/s (21.6 GB/h) native, typically 12 MB/s (43.2 GB/h) with hardware data compression* 60 seconds average to locate a file in 80 GB of data 50,000 tape motion hours minimum (continuous operation) 1,000,000 passes 250,000 hours at 100% duty cycle

DLT 80i: 3.38 x 5.83 x 9.60 in (86 x 148 x 244 mm) DLT 80e: 6.3 x 6.9 x 12.8 in (160 x 175 x 325 mm) DLT 80m: 4.25 x 6.5 x 11.5 in (108 x 165 x 291 mm) DLT 80i: 6.4 Ib (2.9 kg) DLT 80e: 14.56 Ib (6.63 kg) DLT 80m: 7.5 lb (3.4 kg) DLT 80i/m: 5V DC, 3.6A; 12V DC, 1.6A DLT 80e: 100–240V, 0.7A, 50–60 Hz

Three-year Express Exchange

Installation guide, HP Surestore Tape CD-ROM (containing electronic user guide, drivers, HP Library and Tape Tools utilities), Yosemite Technologies CD (containing TapeWare workstation and server backup software supporting Windows

95/98, Windows NT® Workstation, Windows 2000 Professional, Windows NT Server, Windows 2000 Server, Novell NetWare 4.x and 5.x, and Red Hat Linux 5.2 and 6), warranty registration card, HP Netserver L-series mounting tray, HP Brio/Vectra/Kayak and HP Netserver E-series rails, Compaq rails, screws, one HP DLTtape IV data cartridge, and one HP DLTtape cleaning cartridge.

All internal models also include: mounting tray for HP Netservers, jumpers, Compaq rails, and screws. DLT 80e also includes: 1.5m external SCSI cable (68-pin high-density), power cable, multi-mode terminator.

C5725A HP Surestore DLT 80i C7456A HP Surestore DLT 80m H3157A/E HP Supportpack 3-year, next-day response H4617A/E HP Supportpack 3-year, 4-hour response

* assumes a 2:1 compression ratio; this may vary since compression is data dependent

key features

technical specifications

capacity

media

interface

transfer rate sustained

search speed

head life

cartridge life

MTBF

dimensions (hxwxd)

weight

power requirements

hardware warranty

all products include

ordering information

Windows and Windows NT are U.S. registered trademarks of Microsoft Corporation. Technical information in this document is subject to change without notice. © Copyright Hewlett-Packard Company 2001 12/01 5980-8666EN