The HP ProLiant DL380, the world's largest selling server, delivers on its history of design excellence with enterprise-class uptime and
manageability, proven 2-way Intel Xeon performance, and 2U density for a variety of rack deployments and applications.
Processors:
Dual-core Intel® Xeon™ 5000 and 5100 series processors with 4MB Level 2 cache for blazing performance; systems
support up to 2 processors (2 processors standard on all Performance models)
Preconfigured Performance models save valuable deployment time at a discounted bundle price
Intel 5000P chipset
Memory:
Up to 32 GB PC2-5300 Fully Buffered DIMMs (DDR2-667) with 4:1 and 2:1 interleaving available, online spare and
mirrored memory capabilities
NOTE:
Memory DIMMs in systems with the Front Side Bus (FSB) running at 1333 MHz will run at 667 MHz and in
DA - 12477 Worldwide QuickSpecs — Version 1 — 6/26/2006
Page 1
Page 2
QuickSpecs
Overview
systems with a FSB running at 1066 MHz or 667 MHz the memory DIMMs will run at 533 MHz.
Storage Controller:
Performance Models: Smart Array P400 Controller with 512MB battery-backed write cache (RAID 0/1/5/6)
Base Models: Smart Array P400 Controller with 256MB cache (RAID 0/1/5)
Entry Models: Smart Array E200 Controller with 64MB cache (RAID 0/1)
Internal Drive Support:
(8) small form factor (SFF) hot-plug drive bays to support Serial-attached SCSI (SAS) and Serial ATA (SATA) drives
Network Controller:
Embedded Dual NC373i Multifunction Gigabit Network Adapters with TCP/IP Offload Engine, including support for
Accelerated iSCSI through an optional ProLiant Essentials Licensing Kit
Expansion Slots:
Four available PCI-Express slots, optional mixed PCI-X / PCI-Express configurations available
USB Ports:
USB 2.0 support
5 total ports: (2) ports up front; (2) ports in back; (1) port internal
Redundancy:
Fully redundant hot plug fans
Hot plug power supply with optional redundancy (Included in Performance models)
Management:
New Integrated Lights-Out 2 featuring Integrated Remote Console with KVM over IP performance over shared network
access
HP Power Meter and Power Regulator for ProLiant, delivering integrated power monitoring and server level, policy based
power management with industry leading energy efficiency and savings on system power and cooling costs.
Automatic Server Recovery (ASR), ROM Based Setup Utility (RBSU), HP System Insight Manager, Status LEDs including
system health and UID and SmartStart
System Insight Display on the front bezel for quick and easy server diagnostics
Form Factor:
Rack (2U), (3.5-inch)
Deployment/Serviceability:
Quick Deploy Rail System includes sliding universal rails, an ambidextrous cable management arm and quick release
levers for fast and easy serviceability
Tool-less access to all system components for easy in rack serviceability
Warranty:
Protected by HP Services and a worldwide network of resellers and service providers. Three-year Next Business Day, onsite limited global warranty. Certain restrictions and exclusions apply. Pre-Failure Notification on processors, memory,
and SCSI hard drives. SATA hard drives have a one-year warranty.
HP ProLiant DL380 Generation 5
DA - 12477 Worldwide QuickSpecs — Version 1 — 6/26/2006
Page 2
Page 3
QuickSpecs
Standard Features
HP ProLiant DL380 Generation 5
NOTE:
Integrated Models" section.
Processor
One of the following
depending on Model
Cache Memory
One of the following
depending on Model
Chipset
For the Standard Features shipped in the "Factory Integrated Models", please see the "Configuration Information - Factory
Up to 2 processors supported. Performance configurations include two processors.
For more information regarding Intel chipsets, please see the following URL:
.
Upgradeability
Memory Protection
Memory
Upgradeable to 2 processors
Mirrored, Online spare and Advanced ECC
Type
Standard
(Entry Models)
Standard
(Base Models)
Standard
(Performance Models)
Maximum
NOTE:
MHz and in systems with a FSB running at 1066 MHz or 667 MHz the memory DIMMs will run at 533
MHz.
Memory DIMMs in systems with the Front Side Bus (FSB) running at 1333 MHz will run at 667
PC2-5300 Fully Buffered DIMMs (DDR2-667) with 4:1 and 2:1 interleaving
available (interleaving requires identical DIMMs)
1 GB (2 x 512 MB)
2 GB (2 x 1 GB)
4 GB (4 x 1 GB)
32 GB (8 x 4 GB)
DA - 12477 Worldwide QuickSpecs — Version 1 — 6/26/2006
Page 3
Page 4
QuickSpecs
Standard Features
HP ProLiant DL380 Generation 5
Network Controller
Expansion Slots
Embedded Slots
PCIe Riser
PCIe/PCI-X Riser
(Optional)
Embedded Dual NC373i Multifunction Gigabit Network Adapters with TCP/IP Offload Engine,
including support for Accelerated iSCSI through an optional ProLiant Essentials Licensing Kit
Slot
Number
1
2
NOTE:
NOTE:
*
x8 speeds.
**
number.
***
Device ID by bus (starting with the lowest bus).
The Smart Array P400 Controller with 256MB Cache (SAS Controller) is installed in Slot 1.
Slot
Number
3
4
5
Slot
Number
3
4
5
PCIe slots are standard.
NOTE:
NOTE:
x4 slots support x8 cards, but will run at x4 speeds. x8 slots supports x16 cards, but will run at
Default bus assignment. Inserting cards with PCI bridges may alter the actual bus assignment
NOTE:
Bus Speed
x4 PCIe
x4 PCIe
Bus Speed
x4 PCIe
x8 PCIe
x8 PCIe
Bus Speed
x8 PCIe
64-bit/133MHz
PCI-X
64-bit/133MHz
PCI-X
Slots are enumerated differently based on OS. MS OS's enumerate from lowest to highest
*
Bus Number
*
Bus Number
*
Bus Number
**
60
110
**
140
230
190
**
230
181
182
Device
Number
Device
Number
Device
Number
***
***
***
Hot Plug
no
no
Hot Plug
no
no
no
Hot Plug
no
no
no
PCI Voltage
N/A
N/A
PCI Voltage
N/A
N/A
N/A
PCI Voltage
N/A
3.3 Volt
3.3 Volt
Storage Controller
One of the following
depending on Model
Performance Models:
Base Models:
Entry Models:
DA - 12477 Worldwide QuickSpecs — Version 1 — 6/26/2006
Smart Array P400 Controller with 256MB cache (RAID 0/1/5)
Available upgrades:
for battery-backed write cache (BBWC).
Smart Array E200 Controller with 64MB cache (RAID 0/1)
Available upgrades:
battery-backed write cache (BBWC).
512MB memory module for RAID 0/1/5/6, battery
128MB memory module for RAID 0/1/5, battery for
Page 4
Page 5
QuickSpecs
Standard Features
HP ProLiant DL380 Generation 5
Storage
Maximum Internal Storage
Remote Management
Diskette Drive
Optical Drive
One of the following
depending on Model
Hard Drives
Hot Plug SAS
Integrated Lights Out 2 (iLO 2) Standard Management:
Virtual Text Remote Console
Virtual Power Button Control
Integrated Remote Console
Dedicated & full function shared network connectivity
Embedded system health
Browser, command line and scripted access
Automatic IP Configuration via DHCP/DNS/WINS
Industry Standard 128-bit Secure Sockets Layer (SSL) and Secure Shell security (SSH)
OS independent hardware health status
IML and iLO Event Logging
Support for 12 user accounts with customizable access privilege
None Standard
None Standard
IDE DVD-ROM/CDRW Combo included on Performance models
None Standard
576GB
8 x 72GB with standard internal hot plug SFF
SAS drive cage
Intelligent Manageability
HP Systems Insight Manager
SmartStart
Management Agent
Redundant ROM
Remote Flash ROM
ROM-Based Setup Utility (RBSU)
Integrated Management Log
Automatic Server Recovery (ASR)
Dynamic Sector Repairing (with Smart Array controller)
Drive Parameter Tracking (with Smart Array controller)
Hot Spare Boot
NOTE: Upon the event of a failed processor in a multi-processing environment, the system will
automatically reboot and attempt to use the remaining good processor.
Pre-Failure Warranty (covers processors, SCSI hard drives and memory)
DA - 12477 Worldwide QuickSpecs — Version 1 — 6/26/2006
Please see the following URL for additional information regarding USB
.
ProLiant Essentials
Foundation Pack
Software
HP Systems Insight
Manager
SmartStart
Insight Management
Agents
Subscriber's Choice
HP Systems Insight Manager (HP SIM) helps maximize system uptime and
performance and reduce system maintenance costs by providing proactive
notification of problems before those problems result in unplanned downtime
or reduced productivity. For more information on HP SIM visit
http://www.hp.com/go/hpsim
SmartStart simplifies server setup by providing a quick, easy way to deploy
reliable and consistent server configurations. For more information, please
visit the SmartStart Web site at
SmartStart version supported (minimum): SmartStart 7.51
The Insight Management Agents provide direct, browser-based access to indepth instrumentation built into HP servers, workstations, desktops, or
portables, and send alerts to Systems Insight Manager or other enterprise
management applications in case of subsystem or environmental failures. For
additional information about the Management Agents and other management
products from HP, visit
Subscriber's Choice Driver and Support Alerts/Notifications is a web-based
email subscription service that provides automatic delivery of software and
driver change notifications for ProLiant products. Sign up at
http://www.hp.com/go/subscriberschoice
and customize your profile to receive alerts on updates as they become
available.
http://www.hp.com/servers/manage
.
http://www.hp.com/servers/manage
.
.
DA - 12477 Worldwide QuickSpecs — Version 1 — 6/26/2006
Page 6
Page 7
QuickSpecs
Standard Features
HP ProLiant DL380 Generation 5
ROMPaq, support
software, and
configuration utilities
Insight Diagnostics
Optional ProLiant Essentials
Value Packs
The latest software, drivers, and firmware fully optimized and tested for your
ProLiant server and options
Available in SmartStart or downloadable from the Software and Drivers
download pages at
The most advanced configuration analysis, reporting and troubleshooting
utilities used by HP and at your fingertips, available in SmartStart.
Optional software offerings that extend the functionality of an Adaptive
Infrastructure to address specific business problems and needs:
Rapid Deployment Pack (RDP) is an automated deployment and
provisioning solution for all ProLiant servers. RDP includes the ProLiant
Integration Module featuring ProLiant server pre-configured events for
OS installation, and optimized software drivers, firmware and
management agents. Every RDP disc includes 7-day, 10-node trial
licenses for evaluation purposes. RDP requires a license for each server
deployed and is available for purchase with HP servers. For more
information, visit:
Workload Management Pack - provides easier management of
complex environments, improving overall server utilization and
enabling Windows 2000 customers for the first time to confidently
deploy multiple applications on a single multiprocessor ProLiant Server.
Integrated Lights-Out Advanced Pack - upgrades the iLO 2 processor
with comprehensive remote control including Virtual KVM graphical
console, virtual media, power management and enterprise security.
Integrated Lights-Out Select Pack - upgrades the iLO 2 processor with
virtual media, power management and enterprise security for text
console environments.
Performance Management Pack - a performance management solution
that identifies and explains hardware performance bottlenecks on
ProLiant servers and attached options enabling users to better utilize
their valuable resources.
Intelligent Networking Pack - detects and analyzes network bottlenecks
or broken network linkages and steers traffic to the optimum route
based on network conditions, plus it provides an extra layer of
protection. The virus throttle feature of the solution slows the
propagation of fast spreading virus.
Vulnerability and Patch Management Pack - identifies and remediates
software security vulnerabilities due to missing patches as well
operating system configurations that can be exploited by viruses,
worms, and other blended threats.
Virtual Machine Management Pack - provides central management
and control of virtual machines from Microsoft and VMware. Integrated
approach provides the ability to manage both physical and virtual
resources from a single management console.
Server Migration Pack - The Server Migration Pack automates the
manual processes required for migrating servers between physical or
virtual platforms (P2V, V2P, and V2V).
http://www.hp.com/go/support
http://www.hp.com/servers/rdp
.
.
DA - 12477 Worldwide QuickSpecs — Version 1 — 6/26/2006
Page 7
Page 8
QuickSpecs
Standard Features
NOTE
http://www.hp.com/servers/proliantessentials
QuickSpecs for more information.
NOTE:
http://www.hp.com/servers/proliantessentials
HP ProLiant DL380 Generation 5
Server Migration Pack - P2P Edition: Upgrading or replacing your
existing server? Effortlessly transition to new servers with automated,
accurate and affordable migration of OS, application and data.
Accelerated iSCSI Pack - enables the embedded Multifunction network
controller to serve as both a NIC and an iSCSI HBA providing access
to SAN storage over the same connection used for networking.
Processing of the protocol stack is offloaded to the NIC reducing CPU
utilization and greatly improving the speed with which the requests are
processed and sent to the network.
: Flexible and volume quantity license kits are available for ProLiant Essentials Value Packs. Refer to
or the various ProLiant Essentials Value Pack product
For more information regarding ProLiant Essentials Software, please see the following URL:
.
Industry Standard
Compliance
Security
Server Power Cords
UPS and PDU Power
Cord Matrix
ACPI 2.0 Compliant
PCI 2.2 Compliant
WOL Support
Microsoft® Logo certifications
USB 2.0 Support
Power-on password
Keyboard password
Diskette drive control
Diskette boot control
QuickLock, Network Server Mode
Parallel and serial interface control
Administrator's password
Disk configuration lock
One Highline IEC Power cord ships standard
Please see the UPS and PDU cable matrix that lists cable descriptions, requirements, and specifications for
UPS and PDU units:
Microsoft Windows Server 2000
Microsoft Windows Server 2003
Novell NetWare
LINUX (Red Hat, SuSE)
SCO UnixWare, OpenServer
VMware Virtualization Software
Solaris 10 32/64-bit
For more information on HP's Certified and Supported ProLiant Servers, please visit the VMware
.
.
.
.
.
.
Rack Airflow Requirements
Rack 10000 series Cabinets
The increasing power of new high-performance processor technology requires increased cooling
efficiency for rack-mounted servers. The 10000 Series Racks provide enhanced airflow for maximum
cooling, allowing these racks to be fully loaded with servers using the latest processors.
CAUTION: If a third-party rack is used, observe the following additional requirements to ensure adequate
airflow and to prevent damage to the equipment:
Front and rear doors: If your 42U server rack includes closing front and rear doors, you must allow
830 square inches (5,350 sq cm) of hole evenly distributed from top to bottom to permit adequate
airflow (equivalent to the required 64 percent open area for ventilation).
Side: The clearance between the installed rack component and the side panels of the rack must be
a minimum of 2.75 inches (7 cm).
CAUTION:
arrangement ensures proper airflow. Using a rack without blanking panels results in improper cooling that
can lead to thermal damage.
NOTE:
provided with the server, or to the server documentation located in the Support section at the following
URL:
Always use blanking panels to fill all remaining empty front panel U-spaces in the rack. This
For additional information, refer to the Setup and Installation Guide or the Documentation CD
.
DA - 12477 Worldwide QuickSpecs — Version 1 — 6/26/2006
Page 9
Page 10
QuickSpecs
Standard Features
HP ProLiant DL380 Generation 5
Rack Kit
Telco Rack Support
Factory Express Portfolio
for Servers and Storage
The HP ProLiant DL380 quick deploy rail system provides tool-free support for racks with square or round
mounting holes (including Compaq/HP 7000*, 9000, 10000 and HP series), with an adjustment
range of 24" - 36". The ambidextrous cable management arm can be mounted on either the left or right
side for improved cable management.
NOTE:
management arm is mounted on the right.
*
NOTE:
B21; or High Air Flow Rack Door Insert for the 7142 Rack (6-pack) - PN: 327281-B22) are required to
support the HP ProLiant DL380 G5 in 7000 series racks. The DL380 G5 Cable Management Arm is not
supported on 7000 series racks.
DL380 G5 Telco Rack Kit:
Support for all 2-post Telco racks requires the use of the standard rack kit and an additional option kit
from Rack Solutions (
HP Factory Express offers configuration, customization, integration and deployment services for HP servers
and storage products. Customers can choose how their factory solutions are built, tested, integrated,
shipped and deployed.
Factory Express offers service packages for simple configuration, racking, installation, complex
configuration and design services as well as individual factory services, such as image loading, asset
tagging, and custom packaging. HP products supported through Factory Express include a wide array of
servers and storage: HP Integrity, HP ProLiant, HP ProLiant Server Blades, HP BladeSystem, HP 9000
servers as well as the MSA1000, VA7xxx, EVA, XP, rackable tape libraries and configurable network
switches.
Cable management arm must be removed to access hot-plug power supplies when the cable
High Airflow Inserts (High Air Flow Rack Door Insert for the 7142 Rack (single) - PN: 327281-
http://www.racksolutions.com/hp/
)
Custom Builder
RoHS Compliant
For more information on Factory Express services for your specific server model please contact your sales
representative or go to
Please see the Enterprise Configurator for configuration assistance at:
http://www.hp.com/products/configurator
For Resellers in countries/regions with RoHS legislation (see NOTE) (e.g. EU, China, etc.)
The use of the noted material in a solution and subsequent resale of that solution will result in the solution
no longer meeting the requirements of RoHS legislation.
NOTE:
and PBDEs in electronic products. Countries/regions outside the EU, eg. China, are introducing similar
legislation. References to 'RoHS legislation' means requirements of Directive 2002/95/EC or to similar
substance restriction legislation enacted by any country/region outside the EU.
Directive 2002/95/EC restricts the use of lead, mercury, cadmium, hexavalent chromium, PBBs
http://www.hp.com/go/factory-express
.
.
DA - 12477 Worldwide QuickSpecs — Version 1 — 6/26/2006
Page 10
Page 11
QuickSpecs
Standard Features
HP ProLiant DL380 Generation 5
Service and Support
HP services provide continuous care and support expertise with committed response designed to meet
your IT and business needs.
To fully capitalizing on your HP ProLiant servers' capabilities requires a service partner who thoroughly
understands your server technology and systems environment. HP Services, an industry leader in provision
of multi vender support solutions provides a range of support services designed to meet the varying needs
of business. Whether an SMB or large global corporation HP has a ProLiant server support offer to help
you speedily deploy and maximize system uptime.
Extended Care – Minimum recommended service support offer designed to ensure customers have access
to expert assistance, whenever they need it.
Add services description and part number e.g. ProLiant ML110 3 year 9x5 next business day
coverage, excluding holidays - part number.
Committed Care – Cost-effective service options designed to extend HP Services committed response and
guaranteed fix times, designed to speed problem resolution.
Add services description and part number e.g. ProLiant ML110 1 3 year 3x5 same business day 4
hour response coverage, excluding holidays - part number.
Committed Response – Highest HP Support service level recommend to help increase IT performance and
availability with comprehensive, consistent hardware and software services
Add services description and part number e.g. ProLiant ML110 3 year 24x7 same business day 4
hour response coverage - part number.
Deployment Services - HP Installation and Start Up services designed to take time, risk, and worry out of
the deployment of ProLiant servers — and free customers people to focus on what they do best, their
business.
Add services description and part number e.g. ProLiant ML110 Installation - part number.
DA - 12477 Worldwide QuickSpecs — Version 1 — 6/26/2006
Page 11
Page 12
QuickSpecs
HPC Interconnects
HP ProLiant DL380 Generation 5
NOTE:
portfolio. These high-speed interconnects are fully supported by HP when they are part of these configure to order clusters. Solutions
can be defined with a lot of flexibility with the help of configuration tools. Please visit the following URL to configure HPC Clusters with
InfiniBand, Gigabit Ethernet or Myrinet Interconnects:
HPC Interconnect
High Performance Computing (HPC) interconnect technologies are available for the DL380 under the Cluster Platform product
4MB (1 x 4MB) Level 2 cache - 5100 Series
4 GB (4 x 1 GB of 4:1 interleaved PC2-5300 Fully Buffered DIMMs (DDR2-
667) with Advanced ECC, mirrored and online spare memory capabilities
Embedded Dual NC373i Multifunction Gigabit NICs
Smart Array P400 Controller with 512MB battery-backed write cache (RAID
0/1/5/6)
None ship standard
576GB max - 8 x 72GB SAS drives (with optional hard drives)
IDE DVD-ROM/CDRW combo
Rack (2U), (3.5-inch)
Hot Plug Fully Redundant Fans and Power Supplies
4MB (1 x 4MB) Level 2 cache - 5100 Series
1 GB (2 x 512 MB) PC2-5300 Fully Buffered DIMMs (DDR2-667) with
Advanced ECC, mirrored and online spare memory capabilities
Embedded Dual NC373i Multifunction Gigabit NICs
Smart Array E200 Controller with 64MB cache (RAID 0/1)
None ship standard
576GB max - 8 x 72GB SAS drives (with optional hard drives)
Optional CD-ROM, DVD, DVD/CD-RW combo, DVD+R/RW or floppy drive
Rack (2U), (3.5-inch)
Hot Plug Fully Redundant Fans Standard
U.S.
Brazil
Japan
APD
Euro
PRC
DA - 12477 Worldwide QuickSpecs — Version 1 — 6/26/2006
Page 14
Page 15
QuickSpecs
HP ProLiant DL380 Generation 5
Configuration Information - Factory Integrated Models (North America only)
NOTE:
NOTE:
Configure-to-order servers must start with a CTO Chassis.
NOTE:
NOTE:
For Configure to Order requirements within EMEA region, please consult local Sales Contact.
HP does not allow factory integration of options into standard models listed above.
This product offering does not support HP Factory Express Server Configuration Level 1.
FIO indicates that this option only available as a Factory Installable Option.
Step 1: Base Configuration (choose one of the following configurable models)
Models
HP ProLiant DL380G5 Rack Chassis
Factory Integrated Model ships with:
(8) SFF Serial Attached SCSI (SAS) Drive Bays
Embedded Dual NC373i Multifunction Gigabit NICs
PCI-Express Riser Cage
800 Watt hot plug power supply, CE Mark Compliant
One IEC Power cord
12 hot plug fans (fully redundant)
Rack (2U), (3.5-inch)
Step 1A: Choose SAS Controller (must choose only one of the following)
SAS Controllers
P400/256 for DL380 G5/ DL385 G2 FIO
NOTE:
P400/512 BBWC for DL380 G5/ DL385 G2 FIO
NOTE:
HP Smart Array E200/64 Controller
NOTE:
HP Smart Array E200/128 BBWC Controller
NOTE:
HP Smart Array P600 Controller
NOTE:
PCI Express
PCI Express
PCI Express
PCI Express
PCI-X. SA-P600 Controller supports both internal and external drives.
391835-B21
405160-B21
405162-B21
409180-B21
411508-B21
337972-B21
DA - 12477 Worldwide QuickSpecs — Version 1 — 6/26/2006
Page 15
Page 16
QuickSpecs
HP ProLiant DL380 Generation 5
Configuration Information - Factory Integrated Models (North America only)
Step 2: Choose Required Options (only one of the following from each list unless otherwise
noted)
Processors
Base Memory
HP X5160 DL380G5 FIO Kit
HP X5150 DL380G5 FIO Kit
HP X5140 DL380G5 FIO Kit
HP X5130 DL380G5 FIO Kit
HP X5120 DL380G5 FIO Kit
HP X5110 DL380G5 FIO Kit
HP X5080 DL380G5 FIO Kit
HP X5060 DL380G5 FIO Kit
HP X5050 DL380G5 FIO Kit
1 GB FBD PC2-5300 2 x 512 MB Kit
2 GB FBD PC2-5300 2 x 1 GB Kit
4 GB FBD PC2-5300 2 x 2 GB Kit
8 GB FBD PC2-5300 2 x 4 GB Kit
Step 3: Choose Additional Options for Factory Integration
Performance Packs
The HP ProLiant DL380 G5 performance packs are necessary to configure a HP
ProLiant DL380 G5 Performance Model. HP ProLiant DL380 G5 Performance model
includes the latest performance technologies and enterprise class availability features
pre-installed for convenience and value. The performance pack includes a 2nd
processor and a redundant power supply.
HP DL380G5 X5160 HPM FIO Perf Pack
HP DL380G5 X5150 HPM FIO Perf Pack
Step 4: Choose Additional Options for Factory Integration
NOTE:
For additional options, please refer to the "Options" section below.
419812-B21
419811-B21
DA - 12477 Worldwide QuickSpecs — Version 1 — 6/26/2006
Page 16
Page 17
QuickSpecs
Options
HP ProLiant DL380 Generation 5
NOTE:
HP ProLiant DL380 G5
Unique Options
ProLiant Essentials
Value Pack Software
Some options may not be integrated at the factory. Please contact your local sales representative for additional information.
ProLiant Essentials Server Migration Pack, Single-Migration License
NOTE:
activation key and documentation.
ProLiant Essentials Server Migration Pack - Physical to ProLiant Edition, Single-Migration
License
NOTE:
machine. Or this license can be used to migrate a virtual machine from one
virtualization layer i.e. VMware GSX to a different virtualization layer such as VMware
ESX or Microsoft Virtual Server 2005.
NOTE:
Kits please see the QuickSpecs at:
NOTE:
QuickSpecs for Technical Specifications such as capacity, height, width, interface,
transfer rate, seek time, physical configuration, and operating temperature:
SAS Controllers
Smart Array P400 Controller
HP Smart Array P400/256MB Controller
HP Smart Array P400 Controller/512MB and BBWC
512MB Battery-backed cache upgrade
NOTE:
Battery-backed write cache upgrade
NOTE:
Smart Array P400 Battery Attach Kit
NOTE:
a battery into the server if a Smart Array P400 is integrated outside of the factory. For
all solutions, please refer to the server QuickSpecs and User's Manual for detailed
installation instructions.
Smart Array E200 Controller
HP Smart Array E200/128 Controller
HP Smart Array E200/64 Controller
128-MB BBWC (Battery-Backed Write Cache) Enabler
NOTE:
Smart Array 642 Controller.
Smart Array P600 Controller
HP Smart Array P600 Controller
NOTE:
Please see the SAS Hard Drive QuickSpecs for Technical Specifications such
SATA drives have a 1 year warranty. Please see the SATA Hard Drive
Please refer to the HP ProLiant DL380 G5 SCSI Cabling Matrix for information
For Smart Array P400 Controller.
For Smart Array P400 Controller.
This option kit contains a 24" battery cable and adhesive material for installing
Supports the Smart Array E200 Controller, Smart Array 641 Controller, and
Requires Mixed PCI-E/X riser cage.
375859-B21
375861-B21
379306-B21
405132-B21
411064-B21
405148-B21
383280-B21
417836-B21
411508-B21
409180-B21
351580-B21
337972-B21
DA - 12477 Worldwide QuickSpecs — Version 1 — 6/26/2006
Page 20
Page 21
QuickSpecs
Options
HP ProLiant DL380 Generation 5
512 MB Battery-Backed Cache Upgrade
NOTE:
Array P600 Controller and the Smart Array 6400 series Controller.
NOTE:
such as PCI Bus, PCI Peak Data Transfer Rate, SCSI Protocols supported, SCSI Peak
Data Transfer Rate, Channels, SCSI Ports, Drives supported, Cache, RAID support, and
additional information:
SCSI Controllers for External Drive/Storage Support
NOTE:
(PCI-E/PCI-X).
Smart Array 6402/128 Controller
NOTE:
Smart Array 6404/256 Controller
NOTE:
Smart Array 642 Controller
NOTE:
128-MB Battery-Backed Write Cache (BBWC)
NOTE:
Smart Array 642 Controller.
Ultra320 Expansion Module for SA-6402
64-Bit/133-MHz Single Channel Ultra320 SCSI HBA G2
NOTE:Please see the following Controller or SCSI Adapter QuickSpecs for Technical
Specifications such as PCI Bus, PCI Peak Data Transfer Rate, SCSI Protocols supported,
SCSI Peak Data Transfer Rate, Channels, SCSI Ports, Drives supported, Cache, RAID
support, and additional information:
This 512-MB Battery-Backed Cache Module upgrade kit supports the Smart
Please see the following Controller QuickSpecs for Technical Specifications
Please see the following QuickSpecs for additional information:
All Ultra 320 controllers are PCI-X and require the Mixed Riser Cage Option Kit
Ultra320 SCSI.
Ultra320 SCSI.
Ultra320 SCSI.
Supports the Smart Array E200 Controller, Smart Array 641 Controller, and
372538-B21
347786-B21
273915-B21
273914-B21
291967-B21
351580-B21
273911-B21
374654-B21
DA - 12477 Worldwide QuickSpecs — Version 1 — 6/26/2006
Page 21
Page 22
QuickSpecs
Options
HP ProLiant DL380 Generation 5
Communications
Redundant Options
HP NC150T PCI 4-port Gigabit 1000T Combo Switch Adapter
HP NC310F PCI-X 1000SX Gigabit Server Adapter
HP NC320T PCI Express 1000T Gigabit Server Adapter
HP NC340T PCI-X 4-port 1000T Gigabit Server Adapter
HP NC370F PCI-X Multifunction 1000SX Gigabit Server Adapter
HP NC370T PCI-X Multifunction 1000T Gigabit Server Adapter
HP NC373F PCI Express Multifunction Gigabit Server Adapter
HP NC380T PCI Express Dual Port Multifunction Gigabit Server Adapter
HP NC1020 PCI 1000T Gigabit Server Adapter
HP NC7170 PCI-X Dual Port 1000T Gigabit Server Adapter
HP NC7771 PCI-X 1000T Gigabit Server Adapter
NOTE:
with the embedded Dual NC373i Multifunction Gigabit NICs. When teaming with
other NICs or with the embedded NIC, the lack of Jumbo Frames and LSO features on
the NC1020 will cause high end NICs to have those features disabled.
Redundant Power Supply 350/370/380 G5 AU Kit
Redundant Power Supply 350/370/380 G5 EU Kit
Redundant Power Supply 350/370/380 G5 JP Kit
Redundant Power Supply 350/370/380 G5 Worldwide Kit
Redundant Power Supply 350/370/380 G5 UK Kit
Redundant Power Supply 350/370/380 G5 US Kit
Any NIC (except the NC1020) on the option list can be used for redundancy
NOTE:
Ultra320 SCSI HBA G2 (374654-B21) require the optional PCI-X Hot Plug Riser Cage
Option Kit (410570-B21).
For recommended tape drive offerings for this ProLiant server see the following:
USB Tape Drives
HP StorageWorks DAT 72 USB External Tape Drive (Carbonite)
External, Rack-Mount, and Array Module Ultrium Tape Drives
HP StorageWorks Ultrium 232 External Tape Drive (Carbonite)
HP StorageWorks Ultrium 460 External Tape Drive (Carbon)
HP StorageWorks Ultrium 448 External Tape Drive (Carbonite)
HP StorageWorks 1U Rack-mount kit with one Ultrium 448 (Carbonite)
HP StorageWorks Ultrium 960 External Tape Drive (Carbonite)
HP StorageWorks 3U Rack-mount kit with one Ultrium 960 (Carbonite)
NOTE:
For the complete listing of Tape Drive offerings, please see:
All SCSI tape and tape automation devices connecting to the Single Channel
Please see the HP StorageWorks Ultrium Tape Drive QuickSpecs for additional
DW027A
DW065B
Q1520B
DW017B
DW028B
Q1539B
Q1595B
DA - 12477 Worldwide QuickSpecs — Version 1 — 6/26/2006
Page 22
Page 23
QuickSpecs
Options
options such as controllers, media, and other related items:
(Worldwide)
For an up-to-date listing of the latest O/S and software support details for HP DAT
drives, please visit:
Rack-Mount Tape Drive Enclosures
HP StorageWorks 1U Rack-Mount Kit
NOTE:
compatible with multiple Single-Ended and LVD SCSI tape drives including DAT 24,
DAT 40, DAT 72, DLT VS80, DLT VS160, Ultrium 215, Ultrium 232, and Ultrium 448
tape drives.
HP StorageWorks 1U USB Rack-Mount Kit
HP StorageWorks 3U Rack-Mount Kit
NOTE:
drives and compatible with multiple Single-Ended and LVD SCSI tape drives including
DAT 24, DAT 40, DAT 72, DLT VS80, DLT VS160, SDLT 320, SDLT 600, Ultrium
215, Ultrium 230, Ultrium 232, Ultrium 460, Ultrium 448 and Ultrium 960 tape
drives.
Please see the DAT Tape Drive QuickSpecs for controllers, media, and other
http://www.hp.com/go/connect
The 1U Rack-mount Kit can support up to 2 half-height tape drives and is
The 3U Rack-Mount Kit can support up to 2 full-height or 4 half-height tape
Please see the Rack-Mount Tape Drive Kits QuickSpecs for additional
.
.
Q1523B
A7445B
A8007A
274338-B22
Tape Autoloaders
HP StorageWorks 1/8 Tape Autoloader
HP StorageWorks 1/8 Ultrium 960 Tape Autoloader
HP StorageWorks 1/8 Ultrium 448 Tape Autoloader
HP StorageWorks 1/8 Ultrium 232 Tape Autoloader
NOTE:
http://www.hp.com/go/automation
complete solution; reference current compatibility information at
http://www.hp.com/go/ebs
Please reference the 1/8 Tape Autoloader QuickSpecs at
for additional information needed to create a
DA - 12477 Worldwide QuickSpecs — Version 1 — 6/26/2006
AF204A
AF203A
AF202A
Page 23
Page 24
QuickSpecs
Options
HP ProLiant DL380 Generation 5
Tape Libraries
HP StorageWorks MSL2024 Tape Library
HP StorageWorks MSL2024 1 Ultrium 960 Drive Library
HP StorageWorks MSL2024 1 Ultrium 960 FC Drive Library
HP StorageWorks MSL2024 1 Ultrium 448 Drive Library
HP StorageWorks MSL2024 2 Ultrium 448 Drive Library
HP StorageWorks MSL4048 Tape Library
HP StorageWorks MSL4048 1 Ultrium 448 Drive Library
HP StorageWorks MSL4048 2 Ultrium 448 Drive Library
HP StorageWorks MSL4048 1 Ultrium 960 Drive Library
HP StorageWorks MSL4048 1 Ultrium 960 FC Drive Library
HP StorageWorks MSL4048 2 Ultrium 960 Drive Library
HP StorageWorks MSL4048 2 Ultrium 960 FC Drive Library
HP StorageWorks MSL6000 Tape Library
Ultrium 960 technology
HP StorageWorks MSL6030 1 Ultrium 960 Dr LVDS Library
HP StorageWorks MSL6030 1 Ultrium 960 Dr FC Library
HP StorageWorks MSL6030 2 Ultrium 960 Dr LVDS Library
HP StorageWorks MSL6030 2 Ultrium 960 Dr FC Library
Ultrium 460 technology
HP StorageWorks MSL6030 1 Ultrium 460 Dr LVDS Library
HP StorageWorks MSL6030 1 Ultrium 460 Dr FC Library
HP StorageWorks MSL6030 2 Ultrium 460 Dr LVDS Library
HP StorageWorks MSL6030 2 Ultrium 460 Dr FC Library
NOTE:
QuickSpecs at
needed to create a complete solution; reference current compatibility information at
http://www.hp.com/go/ebs
Please reference the MSL2024, MSL4048 and MSL6000 Tape Library
http://www.hp.com/go/automation
for additional information
AG115A
AG326A
AG116A
AG117A
AG320A
AG321A
AG322A
AG324A
AG323A
AG325A
AD606B
AD608B
AD607B
AD609B
AD598B
AD600B
AD599B
AD601B
HP Data Protector Express
Software
HP DP Express Backup Server Upgrade for ProLiant Software
HP DP Express Package for Microsoft Small Business Server
NOTE:
software, please visit the "Protect Your Data" link accessible from your ProLiant server's
System Management Homepage (SMH) software (SmartStart 7.5 or later).
NOTE:
information regarding the purchase of HP Data Protector Express software:
HP Serviceguard for Linux ProLiant Cluster A.11.16 for SUSE SLES 9 and Red Hat EL &
4 (2 node license cluster kit)
HP Serviceguard for Linux A.11.16 for SUSE SLES9 and Red Hat EL 3 & 4 (single
license version)
HP Serviceguard for Linux and Red Hat Global File System - 1 year subscription
HP Serviceguard for Linux and Red Hat Global File System - 3 years subscription
DA - 12477 Worldwide QuickSpecs — Version 1 — 6/26/2006
Page 27
Page 28
QuickSpecs
Options
HP ProLiant DL380 Generation 5
HP Rack 10000 Series
(Graphite Metallic)
HP S10614 (14U) Rack Cabinet - Shock Pallet
HP 10842 (42U) Rack Cabinet - Pallet
HP 10842 (42U) Rack Cabinet - Shock Pallet
HP 10647 (47U) Rack Cabinet - Pallet
HP 10647 (47U) Rack Cabinet - Crated
HP 10622 (22U) Rack Cabinet - Pallet
HP 10622 (22U) Rack Cabinet - Shock Pallet
HP 10622 (22U) Rack Cabinet - Crated
NOTE:
pallet) used to ship racks with equipment installed (by custom systems, VARs and
Channels). xxxxxx-B23 (crated) used for air shipments of empty racks.
NOTE:
installed. Not all Compaq equipment is qualified to be shipped in the Rack 10000
series.
DA - 12477 Worldwide QuickSpecs — Version 1 — 6/26/2006
Page 28
Page 29
QuickSpecs
Options
HP ProLiant DL380 Generation 5
HP KVM Switch Options
1U Rackmount Keyboard with USB, GR
1U Rackmount Keyboard with USB, FR
1U Rackmount Keyboard with USB, ITL
1U Rackmount Keyboard with USB, SP
1U Rackmount Keyboard with USB, DEN
1U Rackmount Keyboard with USB, NOR
1U Rackmount Keyboard with USB, SE/FI
1U Rackmount Keyboard with USB, SWI
1U Rackmount Keyboard with USB, PORT
1U Rackmount Keyboard with USB, BEL
1U Rackmount Keyboard with USB, JPN2
1U Rackmount Keyboard with USB, RUS
1U Rackmount Keyboard with USB, INTL
NOTE:
URL:
2x1x16 IP Console Switch with Virtual Media
4x1x16 IP Console Switch with Virtual Media
2x16 Server Console Switch with Virtual Media
PS/2 Virtual Media Interface Adapter, 1 pack
NOTE:
Server Console Switch (KVM), 0 x 1 x 8 port
Server Console Switch (KVM), 0 x 2 x 16 port
PS/2 Interface Adapter, 1 pack
PS/2 Interface Adapter, 8 pack
USB Interface Adapter, 1 pack
Serial Interface adapter - 1 Pack with power supply
NOTE:
Cat5e cables can be found at the following URL:
HP 1x 4 USB/PS2 KVM Switch, RM (ALL)
NOTE:
rack mount monitors, keyboards and all related options please see the following URL:
http://www.hp.com/go/kvm
For additional information regarding Rack Options, please see the following
http://www.hp.com/go/rackandpower
Requires PS/2 and one USB port on server.
Cat5e cables are required to connect Interface Adapters to Console Switches.
For additional information regarding KVM switches, Serial Console servers,
DA - 12477 Worldwide QuickSpecs — Version 1 — 6/26/2006
Page 29
Page 30
QuickSpecs
Options
HP ProLiant DL380 Generation 5
HP Serial Console Server
Options
Service and Support
Offerings (HP Care Pack
Services)
HP 16 Port Serial Console Server (worldwide)
HP 48 Port Serial Console Server (worldwide)
Serial Adapter, RJ45-DB9 DCE Female, 1 Pack
Serial Adapter, RJ45-DB9 DCE Female, 8 Pack
NOTE:
Servers. Additional Serial Adapters and Cat5e cables can be found at the following
URL:
NOTE:
rack mount monitors, keyboards and all related options please see the following URL:
http://www.hp.com/go/kvm
Hardware Services On-site Service
4-Hour On-site Service, 5-Day x 13-Hour Coverage, 3 Years, Electronic
4-Hour On-site Service, 7-Day x 24-Hour Coverage, 3 Years, Electronic
Hardware Services 6-Hour Call to Repair On-site Service
6-Hour Call to Repair, On-site Service, 7-Day x 24-Hour Coverage, 3 Years,
Electronic
Installation & Start-up Services
Hardware Installation, Electronic
Installation & Start-Up of a ProLiant server and Microsoft or Linux O/S per the
Customer Description and/or Data Sheet. To be delivered on a scheduled basis 8am5pm, M-F, excl. HP holidays, Electronic
Installation and Startup for Essentials Rapid Deployment Pack, Electronic
Cat5e cables are required to connect Serial Adapters to Serial Console
http://www.hp.com/go/kvm
For additional information regarding KVM switches, Serial Console servers,
.
.
AF101A
AF102A
AF103A
AF110A
U4544E
U4545E
U4546E
U4554E
U4555E
U5683E
Support Plus
Onsite HW support, 8am-9pm, M-F, 4hr response and Microsoft O/S SW Tech
support offsite, onsite at HP's discretion, 8am-9pm, M-F 2hr response time excl. HP
holidays, Electronic
Support Plus 24
Onsite HW support 24x7, 4hr response and Microsoft O/S SW Tech support offsite,
onsite at HP's discretion, 24x7 2hr response time incl. HP holidays, Electronic
Onsite HW support 24x7, 4hr response and SuSE Linux SW Tech support offsite,
onsite at HP's discretion, 24x7 2hr response time incl. HP holidays, Electronic
Onsite HW support 24x7, 4hr response and Red Hat ES Linux SW Tech support
offsite, onsite at HP's discretion, 24x7 2hr response time incl. HP holidays, Electronic
NOTE:
http://www.hp.com/services/carepack
For more information, customer/resellers can contact
U4556E
U4557E
U6312E
U8334E
DA - 12477 Worldwide QuickSpecs — Version 1 — 6/26/2006
Page 30
Page 31
QuickSpecs
Memory
HP ProLiant DL380 Generation 5
NOTE:
Memory configurations
The server supports the following Advanced Memory Protection (AMP) options to optimize server availability.
Maximum memory capacities for all AMP modes will increase with the availability of 4-GB and 8-GB FBDIMMs, including a
maximum of 64 GB in Advanced ECC mode.
The Advanced Memory Protection option is configured in RBSU. By default, the server is set to Advanced ECC mode. For more
information, refer to HP ROM-Based Setup Utility (on page 56). If the configured AMP mode is not supported by the installed
FBDIMM configuration, the system boots in Advanced ECC mode.
The following configuration requirements apply to all AMP modes:
This server contains 8 DIMM slots. You can expand server memory by installing supported Registered DDR-2 FBDIMMs.
Advanced ECC supporting up to 16 GB of active memory using 2-GB FBDIMMs.
Online Spare Memory providing additional protection against degrading FBDIMMs supporting up to 12 GB of active memory
and 4 GB of online spare memory utilizing 2-GB FBDIMMs.
Mirrored Memory providing protection against failed FBDIMMs supporting up to 8 GB of active memory and 8 GB of mirrored
memory utilizing 2-GB FBDIMMs.
FBDIMMS must be ECC Registered DDR-2 SDRAM FBDIMMs.
FBDIMMs must be installed in pairs.
FBDIMM pairs in a memory bank must have identical HP part numbers.
FBDIMMS must be populated as specified for each AMP memory mode.
The memory subsystem for this server is divided into two branches. Each memory branch is essentially a separate memory controller.
The FBDIMMs map to the two branches as indicated in the following table:
This multi-branch architecture provides enhanced performance in Advanced ECC mode. The concept of multiple branches is
important for the operation of online spare mode and mirrored memory mode.
If the server contains more than 4 GB of memory, consult the operating system documentation about accessing the full amount of
installed memory.
Advanced ECC memory
Advanced ECC memory is the default memory protection mode for this server. In Advanced ECC, the server is protected against
correctable memory errors. The server provides notification if the level of correctable errors exceeds a pre-defined threshold rate. The
server does not fail because of correctable memory errors. Advanced ECC provides additional protection over Standard ECC in that
it is possible to correct certain memory errors that would otherwise be uncorrectable and result in a server failure.
Whereas standard ECC can correct single-bit memory errors, Advanced ECC can correct single-bit memory errors and multi-bit
memory errors if all failed bits are on the same DRAM device on the FBDIMM.
In addition to general configuration requirements, Advanced ECC memory also has the following configuration requirements:
FBDIMM 5B
FBDIMM 7B
FBDIMM 6D
FBDIMM 8D
FBDIMMs must be installed in pairs unless operating in single-FBDIMM mode. The server supports single-FBDIMM mode only in
DA - 12477 Worldwide QuickSpecs — Version 1 — 6/26/2006
Page 31
Page 32
QuickSpecs
HP ProLiant DL380 Generation 5
Memory
FBDIMM slot 1A.
FBDIMMs must be installed in sequential order, beginning with bank A.
In Advanced ECC mode, FBDIMMs must be populated as specified in the following table:
Configuration
1
2
3
4
Online spare memory configuration
Online spare memory provides protection against degrading FBDIMMs by reducing the likelihood of uncorrectable memory errors.
An understanding of single-rank and dual-rank FBDIMMs is required to understand memory usage in online spare mode. FBDIMMs
can either be single-rank or dual-rank. Certain FBDIMM configuration requirements are based on these classifications. A dual-rank
FBDIMM is similar to having two separate FBDIMMs, or ranks, on the same module. Although only a single FBDIMM module, a dualrank FBDIMM acts as two separate FBDIMMs. The purpose of dual-rank FBDIMMs is to provide the largest capacity FBDIMM for the
current DRAM technology. If the current DRAM technology allows for 2-GB single-rank FBDIMMs, a dual-rank FBDIMM using the
same technology would be 4-GB.
In online spare mode, a single rank of memory acts as the spare memory. For single-rank FBDIMMs, the entire FBDIMM acts as the
spare memory. For a dual-rank FBDIMM, only half of the FBDIMM acts as the spare memory while the other half is available for
operating system and application usage.
If one of the non-spare FBDIMMs receives correctable memory errors at a higher rate than a specific threshold, the server
automatically copies the memory contents of the degraded rank to the online spare rank. The server then deactivates the failing rank
and automatically switches over to the online spare. Because FBDIMMs that experience a high rate of correctable memory errors
have a higher probability of receiving an uncorrectable memory error, this effectively reduces the likelihood of uncorrectable memory
errors that would result in server downtime.
Bank A
1A and 3A
X
XX
XXX
XXXX
Bank B
5B and 7B
---
Bank C
2C and 4C
--
Bank D
6D and 8D
-
Online spare is performed per branch of the memory controller. For a server populating both branches, two ranks are utilized for
online spare memory. One branch can have a fail over to the associated online spare while the other branch is still protected.
Each branch is made up of two banks:
Branch 0 contains banks A and C
Branch 1 contains banks B and D
Online spare FBDIMM configuration requirements (in addition to general configuration requirements):
When only bank A is being used, it must be fully populated with dual-rank FBDIMMs.
If banks A and C are being used, they must be fully populated.
If installed, bank A and bank C must contain FBDIMMs with identical part numbers.
If installed, bank B and bank D must also contain FBDIMMs with identical part numbers.
In online spare mode, FBDIMMs must be populated as specified in the following table:
DA - 12477 Worldwide QuickSpecs — Version 1 — 6/26/2006
Page 32
Page 33
QuickSpecs
Memory
HP ProLiant DL380 Generation 5
Branch 0
Configuration
1
*
2
3
*
NOTE:
After installing FBDIMMs, use RBSU to configure the system for online spare memory support ("Configuring online spare memory" on
page 57).
Mirrored memory configuration
Mirroring provides protection against uncorrectable memory errors that would otherwise result in server downtime.
Mirroring is performed on the branch level. Branch 0 and branch 1 mirror each other.
Each branch maintains a copy of all memory contents. Memory writes go to both branches. Memory reads come from only one of the
two branches (unless an uncorrectable error occurs). If a memory read on one branch returns incorrect data due to an uncorrectable
memory error, the system automatically retrieves the proper data from the other branch. A branch is not necessarily disabled (thus
losing mirroring protection) because of a single uncorrectable error. Mirroring protection is not lost due to transient and soft
uncorrectable errors, resulting in systems that maintain mirroring protection (and thus improved uptime) unless there is a true FBDIMM
failure.
Configuration 1 is only supported if using bank A, populated with dual-rank FBDIMMs.
Bank A
1A and 3A
X
XX
XXXX
Branch 0
Bank C
2C and 4C
---
Branch 1
Bank B
5B and 7B
--
Branch 1
Bank D
6D and 8D
Because both branches are active, concurrent reads from both branches at the same time are possible. Therefore, mirroring provides
superior read performance compared to all other Advanced Memory Protection modes.
Mirrored memory FBDIMM configuration requirements (in addition to general configuration requirements):
Banks A and B must be fully populated.
Bank A and bank B must contain FBDIMMs with identical part numbers. If installed, bank C and bank D must also contain
FBDIMMs with identical part numbers.
When using mirrored memory mode, FBDIMMs must be populated as specified in the following table:
Configuration
NOTE:
page 57).
After installing FBDIMMs, use RBSU to configure the system for mirrored memory support ("Configuring mirrored memory" on
Bank A
1A and 3A
1
2
XX
XXXX
Bank B
5B and 7B
Bank C
2C and 4C
--
Bank D
6D and 8D
DA - 12477 Worldwide QuickSpecs — Version 1 — 6/26/2006
Page 33
Page 34
QuickSpecs
Storage
HP ProLiant DL380 Generation 5
Drive Support
Removable Media
1.44-MB Diskette Drive
Slimline CD-RW/DVDROM Combo Option Kit
NOTE: Included in
performance models.
Slimline DVD-ROM Drive
(8x/24x) Option Kit
HP ProLiant Slim CD-ROM
x24
HP DVD+R/RW 8X Slim
Quantity
Supported
Only 1 available
removable media
bay
Only 1 available
removable media
bay
Only 1 available
removable media
bay
Only 1 available
removable media
bay
Only 1 available
removable media
bay
Position
Supported
Slimline bay
Slimline bay
Slimline bay
Slimline bay
Slimline bay
1-8
Controller
Integrated diskette
NOTE:
Integrated IDE
NOTE:
Integrated IDE
NOTE:
Integrated IDE
NOTE:
Integrated IDE
NOTE:
Optional
Optional
Optional
Optional
Optional
Eight SFF SAS hot plug hard drive bays
Hard Drives
SAS - Hot Plug Drives
36GB 3G SAS 10K
72GB 3G SAS 10K
SATA - Hot Plug Drives
Quantity
Supported
Up to 8
Quantity
Supported
DA - 12477 Worldwide QuickSpecs — Version 1 — 6/26/2006
HP StorageWorks Tape
Autoloaders, External
1/8 Tape Autoloader
HP StorageWorks Tape
Libraries, External
MSL2024 (Ultrium 448
and 960-based)
MSL4048 (Ultrium 448
and 960-based)
MSL6000 (Ultrium 960
and 460-based)
MSL6000 (SDLT 600based)
1 autoloader per
1
Up to 2
1 per SCSI
channel
SCSI channel
Please reference
the MSL Tape
Library
QuickSpecs to
determine
configuration
requirements
External
External
External
External
External
NOTE:
(410570-B21):
64-Bit/133-MHz Single Channel Ultra320 SCSI HBA G2
NOTE:
(410570-B21):
64-Bit/133-MHz Single Channel Ultra320 SCSI HBA G2
NOTE:
(410570-B21):
64-Bit/133-MHz Single Channel Ultra320 SCSI HBA G2
NOTE:
(410570-B21):
64-Bit/133-MHz Single Channel Ultra320 SCSI HBA G2
Please consult the EBS connectivity matrix at
http://www.hp.com/go/ebs
Requires the optional PCI-X Hot Plug Riser Cage Option Kit
Requires the optional PCI-X Hot Plug Riser Cage Option Kit
Requires the optional PCI-X Hot Plug Riser Cage Option Kit
Requires the optional PCI-X Hot Plug Riser Cage Option Kit
for detailed connectivity information.
DA - 12477 Worldwide QuickSpecs — Version 1 — 6/26/2006
Page 36
Page 37
QuickSpecs
Power Specifications
HP ProLiant DL380 Generation 5
Power Supply Specification
Operational Input Voltage Range
(Vrms)
Frequency Range (Nominal) (Hz)
Nominal Input Voltage (Vrms)
Max Rated Output Wattage Rating
Nominal Input Current (A rms)
Max Rated Input Wattage Rating
(Watts)
Max. Rated VA (Volt-Amp)
Efficiency (%)
Power Factor
Leakage Current (mA)
Max. Inrush Current (A peak)
Max. Inrush Current duration (mS)
NOTES:
- To review typical system power ratings use the Active Answers Power Calculator which is available via the online tool located at url:
Click on: "ProLiant Servers"
Click on the Server of interest. Example: DL380 G5
Click on: "Power Calculator" link. (You may need to scroll down to see it)
DA - 12477 Worldwide QuickSpecs — Version 1 — 6/26/2006
Page 37
Page 38
QuickSpecs
Technical Specifications
HP ProLiant DL380 Generation 5
System Unit
Dimensions
(with feet/bezel)
Weight
Input Requirements
(per power supply)
BTU Rating
Power Specifications
Power Supply Output
Power
(per power supply)
Temperature Range
Maximum Wet Bulb
Temperature
Relative Humidity
(non-condensing)
Acoustic Noise
(HxWxD)
(approximate)
3.38 x 17.54 x 26.01 in (8.59 x 44.54 x 66.07 cm)
Maximum
Minimum
Rated Line Voltage
Rated Input Current
Rated Input Frequency
Rated Input Power
BTU/HR
To review typical system power ratings use the Active Answers Power
Calculator which is available via the online tool located at URL:
(200VAC)
50 to 60 Hz
1000/1056/1205 W
3490/3680/4150
.
800/850/1000 W
800/850/1000 W
50° to 95° F (10° to 35° C) at sea level with an
altitude de-rating of 1.8° F per 1000 ft (1.0° C
per 304.8 m) to 10,000 ft (3048 m) no direct
sunlight allowed. Maximum rate of change is 18°
F/Hr (10° C/Hr). Upper operating limit is
10,000 ft (3,048 m) or 70 Kpa/10.1 psia.
System performance may be reduced if operating
with a fan fault or above 30° C.
-22° to 140° F (-30° to 60° C) Maximum rate of
change is36° F/Hr (20° C/Hr). Upper nonoperating limit is 30,000 ft (9,144 m) or
30.3KPa/4.4 psia.
10% to 90% relative humidity (Rh), 28° C
maximum wet bulb temperature.
5% to 95% relative humidity (Rh), 38.7° C
maximum wet bulb temperature.
6.4
47
DA - 12477 Worldwide QuickSpecs — Version 1 — 6/26/2006
Page 38
Page 39
QuickSpecs
Technical Specifications
HP ProLiant DL380 Generation 5
Smart Array P400
Controller
Disk Drive and Enclosure
Interface
SAS Connectors
Cache Memory Speed
Server Interface
SAS Speed
Cache Memory
Logical Drives Supported
Maximum Logical Drive
Capacity
Host Memory Addressing
RAID Support
Operating Minimum
(Random Seeks to Fixed
Disks)
L
WAd (BELS)
L
pAm (dBA)
3G SAS (Serial Attached SCSI)
1.5G SATA (Serial Advanced Technology Attachment)
2 internal (SFF8484) x4 wide port connectors
DDR2-533MHz with 40 or 72-bit wide bus provides up to 4.2 GB/s
maximum bandwidth.
x8 2.5G PCIe provides 2GB/s maximum bandwidth.
x8 3G SAS provides 2.4GB/s maximum bandwidth.
40-bit 256MB cache (72-bit 512MB module upgrades available); ECC
protection, battery-backed, and transportable
Up to 32 logical drives
3TB (6 x 500GB)
64-bit, supporting greater than 4GB server memory space
RAID 6 with ADG (Advanced Data Guarding) requires Battery Backed Write
SAS Connectors
Cache Memory Speed
Server Interface
SAS Speed
Cache Memory
Logical Volumes
Supported
Maximum Volume
Capacity
Host Memory Addressing
RAID Support
DA - 12477 Worldwide QuickSpecs — Version 1 — 6/26/2006
3G SAS (Serial Attached SCSI)
1.5G SATA (Serial Advanced Technology Attachment)
2 internal (SFF8484) x4 wide port connectors
DDR1-266 MHz provides up to 4.2 GB/s maximum bandwidth.
x8 2.5G PCIe provides 2GB/s maximum bandwidth.
x8 3G SAS provides 2.4GB/s maximum bandwidth.
40-bit 64MB cache or a 128MB battery backed cache: ECC protection,
battery-backed, and transportable
Up to 32 logical volumes
3 TB (6 x 500 GB)
64-bit, supporting greater than 4GB server memory space
RAID 5 (Distributed Data Guarding)
The information contained herein is subject to change without notice.
Microsoft and Windows NT are US registered trademarks of Microsoft Corporation. Intel is a US registered trademark of Intel
Corporation.
The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and
services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial
errors or omissions contained herein.
For hard drives, 1 GB = 1 billion bytes. Actual formatted capacity is less.
DA - 12477 Worldwide QuickSpecs — Version 1 — 6/26/2006
Page 40
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.