HP de 1000c User Manual

setting up your
store discover
de100c
hp digital entertainment center
unpack your digital entertainment center
step 1:
get ready
owner's  guide
Save your box and packing materials. They provide the safest way to transport the digital entertainment center.
remote  control
two AAA  batteries
digital entertainment center (de100c)
audio cable (red and white  connectors)
20-foot  phone cord
power  cord
composite  video cable (yellow connectors)
phone splitter
organize play
check your internet readiness
dial-up
56k modem is built in.
Some connection methods are  not supported:
Dial-up support excludes Internet Service Providers that rely on proprietary software,
®
such as AOL ISPs that require a Web browser to display banner ads.
No additional equipment is required.
and CompuServe®, and free
broadband
Connecting through your DSL or cable modem (external modem required), or other broadband connection.
You need additional equipment:
■ Router (required) — A router lets you share the
broadband connection between your de100c and a PC or other Internet-connected device.
See your router's manual for details on router connections and configuration.
■ Ethernet cable (optional) — If your router or home
network uses an Ethernet connection, purchase this cable separately. Home phoneline network users (Home PNA): use phone cable supplied.
choose a location
Place your digital entertainment center where you can easily connect it to:
■ your television
■ your stereo or audio/video receiver
■ an Internet connection (wall jack or
router connection)
■ a power outlet
Caution:  Do not block the airflow vents on top of 
the device.
The digital entertainment center's infrared receiver requires an unobstructed signal from the remote. If  you place your de100c inside a cabinet, make sure the blue window area is not blocked from view.
step 2:
connect
a
connect the audio
Connect one end of the audio  cable to the dec100c's analog  audio OUT jacks.
Match red to red, white to white.
Connect the other end to one set  of your receiver's audio IN jacks.
Match red to red, white to white. Your receiver has several sets of input
jacks. Connect the de100c to the CD input jacks or to an AUX set of jacks.
Be sure to set the receiver´s audio input to the corresponding mode when you use your de100c:
CD
TAPE
TUNER
AUX1
AUX2
back of receiver
■ Digital audio capability is available through
the de100c´s OPTICAL and COAX ports.
TUN ER
TAPE
CD
front of receiver
A UX1
A UX2
b
connect the video
Connect one end of the composite video cable to the de100c's composite video OUT jack.
Connect the other end to your TV's composite video IN jack.
alternatives
■ If you use an audio/video receiver, you can connect
the video cable to the de100c's video OUT jack and to a video IN jack on your receiver. Audio and video connections from the de100c must enter the receiver within the same device group (for example, through an AUX group).
■ If your TV does not have a composite video IN jack
available for use but another device in your system (such as a VCR) does, you can connect the de100c to that device's video IN jack. With this daisy-chained method, the device the connection passes through must be powered on when you use the de100c.
■ The de100c also has S-video and VGA connections.
To use one of these outputs, purchase the appropriate cable separately.
c
connect dial-up OR broadband
dial-up
Connect one end of the phone cord to one of the de100c's phone jacks.
Connect the other end to a  phone jack in your home.
sharing a phone jack
To share a household phone jack between your digital entertainment center and a telephone, either:
■ plug the phone splitter into your
household phone jack, then connect the de100c and the phone to the splitter, or
■ plug your telephone´s cord into the
de100c´s second phone jack.
broadband: Ethernet
If your router or home network requires an Ethernet connection:
Connect one end of your Ethernet cable to the de100c's Ethernet port.
Connect the other end to  your router (or to a networked  RJ45 jack in your home).
broadband: Home PNA
If you have a home phoneline network (your home is networked to your router via telephone wire within the walls):
Connect one end of the phone cord (provided) to one of the de100c's phone jacks.
Connect the other end of the phone cord to a networked phone jack in your home.
d
power up
Connect the power cord to the de100c and plug it into  a grounded wall outlet.
Put the batteries into the remote control.
step 3:
check setup
turn on your system
Turn on all components in your setup:
■ your digital entertainment center
■ your television
to the appropriate setting)
■ any daisy-chained components (such
as a VCR)
You'll see welcome to the hp digital
entertainment center on your TV screen.
This illustration shows a typical configuration. Your setup may differ.
home phone jack
connect the phone cord OR an Ethernet cable
phone jacks ethernet port
router
de100c
Your digital entertainment center is connected.
Now perform the onscreen configuration (see the other side).
AUDIO
R
R L
IR MOUSE
/G-LINK
COMPULINK
AV
VIDEO S-VIDEO
L
IN
OUT
INPUT
INPUT
AUDIO
OUT
1
2
AUDIO IN
CD
TAPE
AUX1
AUX2
tv receiver
Loading...