HP c3000 User Manual

QuickSpecs

Overview

HP BladeSystem c3000 Enclosure – Tower – Front View
HP BladeSystem c3000 Enclosure – Tower – Front View
HP BladeSystem c3000 Enclosure – Tower – Front ViewHP BladeSystem c3000 Enclosure – Tower – Front View
1.
Device Bays 1 thru 8
2.
Enclosure DVD Drive
3.
Standby Onboard Administrator (reserved for Future)
4.
Insight Display
5.
Active Onboard Administrator
HP BladeSystem c3000 Enclosure
HP BladeSystem c3000 Enclosure
HP BladeSystem c3000 EnclosureHP BladeSystem c3000 Enclosure
HP BladeSystem c3000 Enclosure – Tower – Rear View
HP BladeSystem c3000 Enclosure – Tower – Rear View
HP BladeSystem c3000 Enclosure – Tower – Rear ViewHP BladeSystem c3000 Enclosure – Tower – Rear View
1.
Local KVM interface
2.
3.
Active Cool Fans
4.
5.
Enclosure Up-link and Service Port
6.
Enclosure Down-link
7.
iLO/Onboard Administrator Port
8.
iLO/Onboard Administrator Port 2 (reserved for future)
9.
Power Supplies
10.
11.
HP BladeSystem c3000 Enclosure
HP BladeSystem c3000 Enclosure
HP BladeSystem c3000 Enclosure HP BladeSystem c3000 Enclosure
1.
Device Bays 1 thru 8
2.
Enclosure DVD Drive
3.
Standby Onboard Administrator (reserved for Future)
4.
Insight Display
––––
Rack
Rack
––––
Front View
Rack Rack
Front View
Front View Front View
DA - 12790 Worldwide — Version 12 — July 14, 2008
HP BladeSystem c3000 Enclosure
HP BladeSystem c3000 Enclosure
HP BladeSystem c3000 Enclosure HP BladeSystem c3000 Enclosure
1.
Local KVM interface
2.
3.
Active Cool Fans
4.
––––
Rack
Rack
Rack Rack
––––
Rear View
Rear View
Rear View Rear View
Page 1
QuickSpecs
HP BladeSystem c3000 Enclosure
HP BladeSystem c3000 Enclosure
HP BladeSystem c3000 EnclosureHP BladeSystem c3000 Enclosure
Overview
5.
Active Onboard Administrator
What's New
What's New
What's NewWhat's New
Support for HP Insight Dynamics - VSE licenses Support for HP 8/12 and 8/24 SAN Switch c-Class BladeSystem
At A Glance
At A Glance
At A GlanceAt A Glance
This document covers the HP BladeSystem c3000 enclosure only. For more information on the HP c7000 enclosure, the HP ProLiant Server Blades, and HP BladeSystem c-Class Interconnect Components please see the following QuickSpecs: HP c7000 Enclosure: HP ProLiant Server Blades:
http://h18000.www1.hp.com/products/quickspecs/division/12534.html
HP BladeSystem c-Class Interconnect QuickSpecs:
http://h18000.www1.hp.com/products/quickspecs/12524_div/12524_div.html
HP BladeSystem c-Class Infrastructure QuickSpecs:
http://h18000.www1.hp.com/products/quickspecs/12517_div/12517_div.html
HP BladeSystem c7000 Enclosure QuickSpecs:
http://h18000.www1.hp.com/products/quickspecs/12810_div/12810_div.html
5.
Enclosure Up-link and Service Port
6.
Enclosure Down-link
7.
iLO/Onboard Administrator Port
8.
iLO/Onboard Administrator Port 2 (reserved for future)
9.
Power Supplies
10.
11.
HP BladeSystem solutions start with a either a c7000 or c3000 Enclosure. For the c3000 Enclosure, customers can add c3000 power supplies, Active Cool Fans, a c3000 DVD drive, and if needed, an optional local KVM module. Once the enclosure has been selected, the following components can be added: networking interconnect modules, HP ProLiant and Integrity Server Blades, and optional Insight Control Environment for BladeSystem management software. Please reference the QuickSpecs listed above.
HP BladeSystem c3000 Enclosures: Offered in two different models: the c3000 Enclosure for racking in standard 19 inch racks, or the c3000 Tower Enclosure on casters for sites without racks. Server blades, storage blades, interconnect modules, power supplies, fans, and Onboard Administrator modules are designed to fit into the c3000 enclosure. The HP BladeSystem c3000 enclosure is:
A single-phase enclosure available worldwide for use with in-rack PDUs & UPSs which accept C13/C14 power cords; or Alternatively, in countries with low-line (100VAC to 110VAC) power outlets, the enclosure's power supplies can be connected directly to low-line wall outlets.
NOTE:
NOTE:
NOTE: NOTE: of the wall outlet circuit to prevent power overload. See Technical specification section in this document for the individual power supply amperage.
HP BladeSystem c3000 enclosure options:
Optional HP 1200W High Efficiency AC Common Slot Power Supplies (up to 6 total) Optional c-Class Active Cool fans (between 4 and 6 total) Optional KVM module Optional DVD drive (if not part of an enclosure bundled part number) Optional Rack rails (if not part of an enclosure bundled part number)
The c3000 enclosure is 6U and holds up to 8 HP c-Class server blades:
Caution: when connecting directly to wall outlets, customers should determine the maximum amperage
DA - 12790 Worldwide — Version 12 — July 14, 2008
Page 2
QuickSpecs
HP BladeSystem c3000 Enclosure
HP BladeSystem c3000 Enclosure
HP BladeSystem c3000 EnclosureHP BladeSystem c3000 Enclosure
Overview
Up to 8 half-height server blades (examples: HP ProLiant BL 260c G5, BL2x220c, BL460c, BL465c, BL465c G5 Server Blade) Up to 4 full-height server blades (Examples: HP ProLiant BL480c, BL 680c G5, BL685c, BL685c G5 Server Blades) Up to 4 HP SB40c Storage blades attached to half-height server blades Up to 4 PCI Expansion blades attached to half-height server blades Or combinations of the above. For additional server & storage blade information, please visit:
http://h18000.www1.hp.com/products/quickspecs/division/12534.html
Types of interconnect modules available: (up to 4 per enclosure)
Ethernet Interconnect Switches from Cisco & Blade Network Technologies (BNT) Ethernet Pass-Thru modules Virtual Connect Ethernet modules (requires VC Management firmware v1.20 or greater) Fibre Channel Interconnect Switches from Brocade & Cisco Virtual Connect Fibre Channel modules Fibre Channel Pass-Thru module. InfiniBand Switch modules For additional HP BladeSystem c-Class Interconnect Component information, please visit:
http://h18000.www1.hp.com/products/quickspecs/12524_div/12524_div.html
HP Insight Control Environment for BladeSystem management software: (Choice of either a trial use DVD, or an 8 blade fully licensed DVD)
A fully licensed DVD covers all 8 blades in the HP BladeSystem Enclosure with no need to buy separate management
and/or provisioning tools Insight Control Environment for HP BladeSystem contains the following components:
HP Systems Insight Manager (HP SIM) with the HP BladeSystem Integrated Manager (BSIM).
HP iLO 2 Select Pack licenses
HP ProLiant Essentials Rapid Deployment Pack (RDP)
HP ProLiant Essentials Insight Power Management Pack (IPM)
HP ProLiant Essentials Virtual Machine Management Pack (VMM)
HP ProLiant Essentials Performance Management Pack (PMP)
HP ProLiant Essentials Vulnerability and Patch Management Pack (VPM) Warranty:
This product is covered by a global limited warranty and supported by HP Services and a worldwide network of HP
Authorized Channel Partners. Hardware diagnostic support and repair is available for three years from date of
purchase. Support for software and initial setup is available for 90 days from date of purchase. Enhancements to
warranty services are available through HP Care Pack services or customized service agreements. SATA hard drives
have a one year warranty.
NOTE:
NOTE:
Server Blade Enclosure Limited Warranty includes 3 year Parts, 3 year Labor, 3-year on-site support.
NOTE:NOTE:
For additional information please visit:
http://h18004.www1.hp.com/products/blades/components/components.html
DA - 12790 Worldwide — Version 12 — July 14, 2008
Page 3
QuickSpecs

Models

HP BladeSystem
HP BladeSystem
HP BladeSystemHP BladeSystem c-Class Server Blade
c-Class Server Blade
c-Class Server Bladec-Class Server Blade Enclosures
Enclosures
EnclosuresEnclosures
Rack Models -
Rack Models -
Rack Models - Rack Models ­HP BladeSystem c3000 Single-Phase Enclosure
NOTE:
NOTE:
Includes 4 AC Power Supplies, 6 Fans, an Onboard Administrator module, a
NOTE:NOTE: DVD drive, rail kit, and 8 Insight Control Environment Licenses.
HP BladeSystem Single-Phase c3000 Enclosure
NOTE:
NOTE:
Includes 4 AC Power Supplies, 6 Fans, an Onboard Administrator module, a
NOTE:NOTE: DVD drive, rail kit, and 8 Insight Control Environment Trial Licenses.
Rack Models
Rack Models
Rack ModelsRack Models HP BladeSystem c3000 Single-Phase Enclosure
NOTE:
NOTE:
Includes 2 AC Power Supplies, 4 Fans, an Onboard Administrator module, a
NOTE:NOTE: DVD drive, rail kit, and 8 Insight Control Environment Licenses; additional power supplies and fans can subsequently be added to support more than 4 blades.
HP BladeSystem Single-Phase c3000 Enclosure
NOTE:
NOTE:
Includes 2 AC Power Supplies, 4 Fans, an Onboard Administrator module, a
NOTE:NOTE: DVD drive, rail kit, and 8 Insight Control Environment Trial Licenses; additional power supplies and fans can subsequently be added to support more than 4 blades.
Tower Models -
Tower Models -
Tower Models - Tower Models ­HP BladeSystem c3000 Tower Enclosure with 8 Insight Control Environment for
BladeSystem Licenses
NOTE:
NOTE:
Includes 4 AC Power Supplies, 6 Fans, an Onboard Administrator module, a
NOTE:NOTE: DVD drive and 8 Insight Control Environment Licenses.
HP BladeSystem c3000 Tower Enclosure with 8 Insight Control Environment Trial Licenses.
NOTE:
NOTE:
Includes 4 AC Power Supplies, 6 Fans, an Onboard Administrator module, a
NOTE:NOTE: DVD drive and 8 Insight Control Environment Trial Licenses.
Tower Models
Tower Models
Tower ModelsTower Models HP BladeSystem c3000 Tower Enclosure
NOTE:
NOTE:
Includes 2 AC Power Supplies, 4 Fans, an Onboard Administrator module, a
NOTE:NOTE: DVD drive and Trial Licenses; additional power supplies and fans can subsequently be added to support more than 4 blades.
HP BladeSystem c3000 Tower Enclosure
NOTE:
NOTE:
Includes 2 AC Power Supplies, 4 Fans, an Onboard Administrator module, a
NOTE:NOTE: DVD drive and Insight Control Environment for BladeSystem Licenses; additional power supplies and fans can subsequently be added to support more than 4 blades.
HP BladeSystem c3000 Enclosure
HP BladeSystem c3000 Enclosure
HP BladeSystem c3000 EnclosureHP BladeSystem c3000 Enclosure
Supports a full enclosure of 8 blades
- A "starter" enclosure that supports up to 4 blades
Supports a full enclosure of 8 blades
- A "starter" enclosure that supports up to 4 blades
437504-B22
437502-B22
437504-B21
437502-B21
458033-B21
458032-B21
469499-B21
469500-B21
DA - 12790 Worldwide — Version 12 — July 14, 2008
Page 4
QuickSpecs

HP BladeSystem c-Class Overview

NOTE:
NOTE:
NOTE: NOTE: specifications, please visit:
HP BladeSystem Overview
HP BladeSystem Overview
HP BladeSystem OverviewHP BladeSystem Overview
For a brief, printer friendly data sheet that describes this product and informs you of the essential capabilities and
http://h71028.www7.hp.com/erc/downloads/4aa0-5978enw.pdf
As server, storage and network technologies have changed; traditional rack-mounted infrastructure solutions have generated increased complexity of both infrastructure management and physical datacenter deployment.
HP BladeSystem is the evolution of rack-mounted and pedestal infrastructure. A BladeSystem reduces costs and simplifies the management, building, and maintenance of the infrastructure behind your multi­server environment. It consolidates and repackages all the supporting infrastructure elements-compute, storage, network, and power into a single platform that can accelerate the integration and optimization of your data center.
The HP BladeSystem c3000 enclosure has the flexibility to scale from a single enclosure holding up to 8 blades, to a rack containing 7 enclosures holding up to 56 blades, the c-Class infrastructure is designed to meet the needs of today's businesses. The c3000 enclosure is designed for several markets:
Remote sites or branch offices holding between 3 and 8 servers, and in deployment sites such as retail stores, branch offices, manufacturing sites, and wiring closets. This enclosure is also designed for harsh environments not found in modern datacenters (high ambient temperatures, dusty environments, and in ships, airplanes, platforms, and vehicles). Small and medium businesses, who own between 3 and 100 servers. The enclosure is designed for use with management devices such as local KVM switches for local administration. Datacenters with special power and cooling constraints, such as datacenters needing DC powered racks, and/or datacenters with low power & cooling capacities (under 3000 watts per rack). HPC clusters with InfiniBand interconnection, where the applications need a 1 to 1 IB network subscription ratio between physical nodes in the compute cluster.
HP BladeSystem c3000 Enclosure
HP BladeSystem c3000 Enclosure
HP BladeSystem c3000 EnclosureHP BladeSystem c3000 Enclosure
HP BladeSystem c-Class infrastructure is made up of several components:
HP ProLiant and/or HP Integrity Server blades for HP-UX, Windows, Linux, and HP Open VMS. Choice of Intel® or AMD processors, including the latest dual-core & quad-core processors for 32-bit and 64-bit applications. HP BladeSystem c-Class enclosure (either a c7000 or c3000) that provides connectivity, power, and cooling options. The c-Class enclosure is designed for full redundancy and high availability. A configurable choice of either redundant or non-redundant power, cooling, enclosure management, and interconnect modules are part of the standard enclosure design. Onboard Administrator module which provides a single point of control for intelligent management of the entire enclosure. Insight Display powered by the Onboard Administrator provides local management through an LCD display conveniently sited on the front of the system. Virtual Connect, Ethernet, Fibre Channel, InfiniBand, iSCSI, and other interconnect choices A power subsystem that provides either redundant or non-redundant power modes and Dynamic Power Saving mode, which uses up to 30% less power than traditional rack-mounted and tower servers. PARSEC (Parallel, Redundant, Scaleable, Enclosure Cooling) architecture: for maximum cooling that consumes less power and reduces datacenter noise. Direct-attach storage blades, and shared storage blades, which will provide file-based or block­based shared storage capacity for the servers within the enclosure.
DA - 12790 Worldwide — Version 12 — July 14, 2008
Page 5
QuickSpecs
HP BladeSystem c-Class Overview
HP ProLiant & Integrity
HP ProLiant & Integrity
HP ProLiant & IntegrityHP ProLiant & Integrity Server Blades
Server Blades
Server BladesServer Blades
HP SB40c Storage Blade
HP SB40c Storage Blade
HP SB40c Storage BladeHP SB40c Storage Blade
HP StorageWorks Tape
HP StorageWorks Tape
HP StorageWorks TapeHP StorageWorks Tape Blades
Blades
BladesBlades
Delivering best-in-class performance, choice and reliability with AMD Opteron™, Intel® Xeon™, and Intel® Itanium processors for HP-UX, Windows, Linux, or HP-pen VMS based servers, the HP portfolio of server blades supports a variety of application requirements for scale-out architectures. HP offers one-, two-, and four-processor (dual-core & quad-core) server blades, including the widest range of performance, and form factors, and the most processing density and performance of any other portfolio. This portfolio of servers is designed for 32-bit and 64-bit applications. For more information please see:
http://h18000.www1.hp.com/products/quickspecs/division/12534.html
The StorageWorks SB40c is a half-height c-Class storage blade featuring support for up to six hot-plug Small Form Factor (SFF) Serial Attached SCSI (SAS) or Serial ATA (SATA) hard disk drives. The SB40c connects directly to the adjacent server blade to provide up to 876GB additional storage capacity to that blade. For maximum fault tolerance the SB40c uses supports hardware RAID 0, 1, 1+0, 5, and 6 (ADG), using the onboard Smart Array P400 with up to 256MB of battery-backed write cache. For more information please see:
http://h18000.www1.hp.com/products/quickspecs/12587_div/12587_div.html
The HP StorageWorks SB920c Tape Blade is an LTO-3 Ultrium tape blade that provides up to 800GB of capacity on a single data cartridge (2:1 compression) and performance up to 432GB/hr (2:1 compression).
HP BladeSystem c3000 Enclosure
HP BladeSystem c3000 Enclosure
HP BladeSystem c3000 EnclosureHP BladeSystem c3000 Enclosure
HP StorageWorks AiO
HP StorageWorks AiO
HP StorageWorks AiOHP StorageWorks AiO SB600c Storage Blade
SB600c Storage Blade
SB600c Storage BladeSB600c Storage Blade
The Ultrium 448c Tape Blade is an LTO-2 Ultrium tape blade the provides up to 400GB of capacity on a single data cartridge (2:1 compression) and performance up to 173GB/hr (2:1 compression). Both tape blades are ideal for HP BladeSystem c-Class customers who need an intgrated data protection solution for their enclosure. They provide direct attach data protection for the adjacent server and network backup protection for all other data within the enclosure. The HP StorageWorks tape blades are the industry's first bladed tape drives and are developed exclusively for the BladeSystem c-Class enclosures.
For more information, please visit:
http://h18000.www1.hp.com/products/quickspecs/12729_div/12729_div.html
The HP AiO SB600c Storage Blade Solution helps customers create HP c-Class BladeSystem business solutions by consolidating file serving (NAS), shared application storage (iSCSI SAN), and data protection under a unified management umbrella to deliver outstanding value and utility. The AIO SB600c Storage Blade Solution consists of the following components; a half-height c-Class server blade, a storage blade with 1.16 TB of raw storage capacity, and HP Management software. For more information, please visit:
http://www.hp.com/go/aiostorage
DA - 12790 Worldwide — Version 12 — July 14, 2008
Page 6
QuickSpecs
HP BladeSystem c-Class Overview
HP BladeSystem c-Class
HP BladeSystem c-Class
HP BladeSystem c-ClassHP BladeSystem c-Class c3000 Enclosure
c3000 Enclosure
c3000 Enclosurec3000 Enclosure
A BladeSystem c3000 enclosure holds up to 8 server and/or storage blades plus redundant or non­redundant network and storage switches. It includes a shared, multi-terabit high-speed mid-plane for wire-once connectivity of server blades to network and shared storage. Power is delivered through a pooled power backplane that ensures the full capacity of the power supplies is available to all blades.
Each c3000 enclosure is built with the following functions:
Up to 8 half-height and/or up to 4 full-height server blades and/or storage blades per enclosure. Up to 3 different interconnect fabrics (Ethernet, FC, IB, iSCSI, SAS, etc.) supported simultaneously within the enclosure. A single-phase power subsystem - for flexibility in connecting to datacenter power, or to UPS's or to low-line wall outlets. PARSEC enclosure design - Parallel, redundant and scalable cooling and airflow design Four (4) to Six (6) Active Cool fans Fully redundant design - no single point of failure; redundant interconnections between servers and interconnect modules; a mid-plane with no active components; redundant cooling using Active Cool fans; all devices are hot-pluggable and customer replaceable. Best performance per watt - lower wattage per server blade, in comparison to rack-mounted servers Full AC redundancy - with no power zones. Single or redundant Onboard Administrator management modules (optional active-standby design)
HP BladeSystem c3000 Enclosure
HP BladeSystem c3000 Enclosure
HP BladeSystem c3000 EnclosureHP BladeSystem c3000 Enclosure
An Onboard Administrator management module is built in to the enclosure with the following functions:
Robust, multiple enclosure setup and control. Reports asset and inventory information for the devices in the enclosure. Reports thermal and power information, including real-time actual power usage per server and per enclosure. Front-mounted Insight Display for easy management at the deployment site. Integrated access to all server blade iLOs from a single cable. Provides integrated access to interconnect bay device management ports from the single Onboard Administrator cable. Single sign-on capability for all devices in the enclosure Role-based security locally and/or with LDAP directory services. Provides a wizard-based initial setup process for easy configuration. An optional DVD drive for local software deployment, and HP SmartStart deployment An optional local KVM interface for connection to KVM switches.
A BladeSystem c3000 enclosure provides the following benefits:
With local and remote hardware management integrated across the solution, one full enclosure can be managed as easily as one server. Scalable: Management and network interconnects extend scalability beyond a single enclosure, allowing resources to be pooled and shared across multiple enclosures. Investment protection: Accommodates multiple server and network designs in one enclosure. Lower costs per server, in comparison to rack-mounted servers Lower power consumption, in comparison to rack-mounted servers. Service and management: Allows multiple administrators to remotely access and maintain multiple servers & interconnect devices simultaneously.
DA - 12790 Worldwide — Version 12 — July 14, 2008
Page 7
QuickSpecs
HP BladeSystem c-Class Overview
HP BladeSystem c-Class
HP BladeSystem c-Class
HP BladeSystem c-ClassHP BladeSystem c-Class Interconnect Options
Interconnect Options
Interconnect OptionsInterconnect Options
Factory Express Portfolio
Factory Express Portfolio
Factory Express PortfolioFactory Express Portfolio for Servers and Storage
for Servers and Storage
for Servers and Storagefor Servers and Storage
HP also offers one of the broadest selections of interconnect fabric options in the industry to provide network, SAN/network attached storage (NAS), and cluster connectivity. HP BladeSystem interconnects provide:
New HP Virtual Connect devices, designed to reduce networking costs and simplify network configuration and provisioning. Seamless integration of Ethernet, FC, InfiniBand, iSCSI, and SAS fabrics: Standard-based switch options include Cisco, Brocade, and HP (BNT) products that integrate within your existing standards. Built-in redundancy: Rear-mounting interconnect modules designed for redundant interconnections between server blades and switches. Cable reduction: Interconnect switches provide up to 32-to-1 network cable reductions per server blade enclosure
For more information HP BladeSystem c-Class Interconnect Components, please visit:
http://h18000.www1.hp.com/products/quickspecs/12524_div/12524_div.html
HP Factory Express offers configuration, customization, integration and deployment services for HP servers and storage products. Customers can choose how their factory solutions are built, tested, integrated, shipped and deployed.
HP BladeSystem c3000 Enclosure
HP BladeSystem c3000 Enclosure
HP BladeSystem c3000 EnclosureHP BladeSystem c3000 Enclosure
HP Insight Control
HP Insight Control
HP Insight ControlHP Insight Control Environment for
Environment for
Environment forEnvironment for BladeSystem Management
BladeSystem Management
BladeSystem ManagementBladeSystem Management Suite
Suite
SuiteSuite
Factory Express offers service packages for simple configuration, racking, installation, complex configuration and design services as well as individual factory services, such as image loading, asset tagging and custom packaging. HP products supported through Factory Express include: a wide array of servers and storage: HP Integrity, HP ProLiant & HP ProLiant & Integrity Server Blades, HP BladeSystem, HP 9000 servers as well as the MSAxxxx, VA7xxx, EVA, XP, rackable tape libraries and configurable network switches.
For more information on Factory Express services for your specific server model please contact your sales representative or go to:
Insight Control Environment for BladeSystem delivers foundation management for HP BladeSystem lifecycles, including remote monitoring, hardware resource deployment, health monitoring, software version control, performance monitoring, vulnerability scanning and patch management and power management.
Insight Control Environment for BladeSystem installs and licenses the following components by default using a wizard-based integrated installer:
HP Systems Insight Manager(SIM) HP iLO Select Pack HP ProLiant Essentials Rapid Deployment Pack(RDP) HP Insight Power Manager(IPM) HP ProLiant Essentials Virtual Machine Manager (VMM) HP ProLiant Essentials Performance Management Pack (PMP) HP ProLiant Essentials Vulnerability and Patch Management Pack
http://www.hp.com/go/factory-express
Additional ProLiant Essentials software and management tools included in the Insight Control Management media kit can be installed manually.
HP Server Migration Pack
DA - 12790 Worldwide — Version 12 — July 14, 2008
––––
Universal Edition
Page 8
QuickSpecs
HP BladeSystem c-Class Overview
NOTE:
NOTE:
HP Server Migration Pack - Universal Edition is licensed separately from the Insight Control
NOTE:NOTE: Environment Suite.
HP Open Service Event Manager HP Instant Support Enterprise Edition
NOTE:
NOTE:
NOTE: NOTE: the Insight Control Management media kit. NOTE:
NOTE:
NOTE: NOTE: Management DVD, which can be delivered with HP BladeSystem c-Class enclosures with a choice of licensing options. Licensing options include a free 30 day evaluation license for 8 servers (default option for every enclosure order), a full purchased license for 8 blade servers or a full purchased license for 16 blade servers). For additional information on HP c-Class Infrastructure please visit: HP BladeSystem c­Class Infrastructure QuickSpecs:
http://h18000.www1.hp.com/products/quickspecs/12517_div/12517_div.html
NOTE:
NOTE:
NOTE: NOTE: BladeSystem, HP Systems Insight Manager and Essentials software refer to:
http://www.hp.com/servers/proliantessentials
iLO Power Management Pack for BladeSystem is energy-efficient management software that delivers centralized control, reliable security, and energy savings for your BladeSystem infrastructure. iPMP combines the total control of iLO 2 Advanced in the area of remote management with the energy monitoring and control of the Insight Power Manager to deliver a robust solution capable of full remote control and power management of ProLiant servers through a unified interface within HP Systems Insight Manager.
HP Server Migration Pack
HP Insight Control Environment for BladeSystem can be installed from the Insight Control
For additional product and licensing information about HP Insight Control Environment for
HP BladeSystem c3000 Enclosure
HP BladeSystem c3000 Enclosure
HP BladeSystem c3000 EnclosureHP BladeSystem c3000 Enclosure
––––
Universal Edition can be installed from the SMP-P2P CD included in
.
Server Management Stand
Server Management Stand
Server Management StandServer Management Stand Alone Software Product -
Alone Software Product -
Alone Software Product -Alone Software Product ­ProLiant Essentials
ProLiant Essentials
ProLiant EssentialsProLiant Essentials
HP Insight Control Environment for Linux (ICE-Linux) provides comprehensive discovery, imaging & deployment, monitoring, and management for Linux-based ProLiant server platforms. Built on the industry-leading HP Systems Insight Manager framework, this solution integrates open source technology with experience leveraged from HP's Linux products in HP ICLE and HP XC Clusters, while providing paths to the future with developing management technologies.
HP Insight Control management suites and select HP ProLiant Essentials include one year of 24 x 7 HP Software Technical Support and Update Service ensuring rapid access to HP support staff and proactive delivery of software updates. For more information about this service, please visit:
http://www.hp.com/services/insight
HP Systems Insight Manager
ProLiant Essentials Rapid Deployment Pack
ProLiant Essentials Server Migration Pack Edition
––––
Universal
HP Systems Insight Manager (HP SIM) provides a unified, secure and extensible standards-based environment to centrally manage servers, storage and other infrastructure devices, (both HP and non-HP) across multiple operating system platforms.
Rapid Deployment Pack (RDP) extends HP Systems Insight Manager with a complete deployment solution for HP ProLiant blade servers. RDP provides a central location to configure server hardware, deploy Windows, Linux and VMware ESX operating environments and install HP ProLiant Support Pack drivers using images and scripted profiles.
Upgrading, replacing, or virtualizing your existing server? Effortlessly transition to new virtual or physical HP ProLiant servers or BladeSystem with automated, accurate and affordable migration of OS, application and data. SMP Universal automates the manual processes required for migrating servers between physical or virtual platforms, whether migrating to VMware or Microsoft virtual machines. SMP Universal allows all of the following
DA - 12790 Worldwide — Version 12 — July 14, 2008
Page 9
QuickSpecs
HP BladeSystem c-Class Overview
ProLiant Essentials Performance Management Pack
Integrated Lights-Out Select Pack
HP Insight Power Manager (IPM)
Virtual Connect Enterprise Manage
ProLiant Essentials Virtual Machine Management Pack
ProLiant Essentials Vulnerability and Patch Management Pack
NOTE:
NOTE:
NOTE: NOTE: to: QuickSpecs for more information.
Flexible and volume quantity license kits are available for ProLiant Essentials Value Packs. Refer
http://www.hp.com/servers/proliantessentials
HP BladeSystem c3000 Enclosure
HP BladeSystem c3000 Enclosure
HP BladeSystem c3000 EnclosureHP BladeSystem c3000 Enclosure
migrations:
physical to ProLiant physical to virtual virtual to virtual virtual to ProLiant
NOTE:
NOTE:
NOTE: NOTE:
Performance Management Pack (offered exclusively through the Insight Control suites) explains hardware performance bottlenecks on ProLiant servers and attached options enabling users to better utilize their valuable resources.
Upgrades the iLO 2 processor with enhanced console sharing and replay, virtual media (floppy, CD/DVD, USB key), virtual folders, historical power reporting, power capping and enterprise security (directory services and two­factor authentication) for servers managed using remote consoles available in iLO 2 Standard and iLO 2 Standard Blade Edition.
Upgrades the single-server remote management capabilities of iLO Select/Advanced to include centralized reporting and policy-based management of power consumption and thermal output provided by the Insight Power Manager. IPM unifies all of this functionality within a single user interface - HP Systems Insight Manager.
Simplifies the management of BladeSystem environments that use Virtual Connect to control LAN and SAN connectivity, helping organizations increase productivity, respond more quickly to business demands, and significantly reduce operating costs.
Virtual Machine Management Pack control of virtual machines from Microsoft and VMware. Integrated approach provides the ability to manage both physical and virtual resources from a single management console.
Vulnerability and Patch Management Pack (offered exclusively through the Insight Control suites) vulnerabilities due to missing patches as well operating system configurations that can be exploited by viruses, worms, and other blended threats.
For more information, visit:
––––
a performance management solution that identifies and
––––
identifies and remediates software security
or the various ProLiant Essentials Value Pack product
http://www.hp.com/go/migrate
––––
provides central management and
.
DA - 12790 Worldwide — Version 12 — July 14, 2008
Page 10
QuickSpecs
HP BladeSystem c-Class Overview
Core Infrastructure
Core Infrastructure
Core InfrastructureCore Infrastructure Management
Management
ManagementManagement
SmartStart
Insight Management Agents
Subscriber's Choice
ProLiant Support Packs and ROMPaq, software
HP BladeSystem c3000 Enclosure
HP BladeSystem c3000 Enclosure
HP BladeSystem c3000 EnclosureHP BladeSystem c3000 Enclosure
SmartStart is a tool that simplifies server setup, providing a rapid way to deploy reliable and consistent server configurations. For more information, please visit the SmartStart Web site at:
http://www.hp.com/servers/smartstart
The Insight Management Agents should be installed on all HP servers to present system instrumentation, health and configuration information into HP Systems Insight Manager and the HP System Management Homepage. The HP System Management Homepage aggregates systems data from Insight Management Agents and other HP management tools, providing a consolidated browser-based interface for managing individual servers.
Insight Management Agents and The HP System Management Homepage are included on ProLiant Support Packs, and can also be installed using the server profiles provided with the ProLiant Essentials Rapid Deployment Pack.
For additional information about the Management Agents and the HP System Management Homepage please visit the management Web site at:
http://www.hp.com/servers/manage
Subscriber's Choice Driver and Support Alerts/Notifications is a web-based email subscription service that provides software and driver change notifications for ProLiant products. Sign up at:
http://www.hp.com/go/subscriberschoice
and customize your profile to receive various new alerts as they become available, on a weekly or monthly basis.
The latest software, drivers, and firmware fully optimized and tested for your ProLiant server and options, available through ProLiant Support Packs the ProLiant Essentials Rapid Deployment Pack, SmartStart or downloaded from Software and Drivers download pages website at:
http://www.hp.com/go/support
.
.
.
HP Enterprise
HP Enterprise
HP EnterpriseHP Enterprise Configurator
Configurator
ConfiguratorConfigurator
The HP eCo-Enterprise Configurator now provides factory default racking for our HP hardware portfolio. This approach is aligned with our strategic direction to meet the needs and expectations of our valued customers. If you require "custom" rack configuration, please contact HP's Customer Business Center or an Authorized Partner for assistance.
DA - 12790 Worldwide — Version 12 — July 14, 2008
Page 11
QuickSpecs
HP BladeSystem c-Class Overview
HP BladeSystem Power
HP BladeSystem Power
HP BladeSystem PowerHP BladeSystem Power Sizer
Sizer
SizerSizer
The HP BladeSystem Power Sizer helps in sizing the power infrastructure needed for a HP BladeSystem solution. This sizer enables effective planning for the power consumption and heat load of the BladeSystem at its site.
The sizer enables you to:
Select the type and number of components within each Blade Server and Blade Enclosure. View the effect of component changes on the power consumption and heat loading. Review server loading and determine power supply and power subsystem requirements. Approximate electrical and heat load for facilities planning purposes.
The sizing estimate is based on component level power measurements for a system stressed to maximum capability.
Values obtained from the BladeSystem Sizer tool are measured with all components stressed to 100% load and are intended for facilities planning purposes only. Actual power consumption varies with application type, application utilization, and ambient temperature.
The p-class BladeSystem and the c-Class BladeSystem solutions are supported in the BladeSystem Power Sizer.
HP BladeSystem c3000 Enclosure
HP BladeSystem c3000 Enclosure
HP BladeSystem c3000 EnclosureHP BladeSystem c3000 Enclosure
Service and Support
Service and Support
Service and SupportService and Support
Available at:
HP Care Pack services provide total care and support expertise with committed response designed to meet your IT and business needs.
The HP Care Pack service for HP ProLiant BL c-Class server blades, cover the server blade and all HP branded hardware options qualified for the server, purchased at the same time or afterwards, internal to the server.
HP Care Pack services for the c7000 and c3000 enclosures cover the enclosure, power supplies and fans. HP qualified rack options are covered by these services when installed within the same rack. HP supported c-Class enclosure devices including pass thru, Ethernet interconnect and virtual connect modules are also covered by the c7000 and c3000 enclosure Care Pack services.
NOTE:
NOTE:
NOTE: NOTE: c3000 enclosure Care Packs, SAN/Fabric switches carry separate Care Packs. SAN/Fabric Switch Care Pack service level support should always be uplifted to match existing storage or server service level.
To fully capitalize on your HP BladeSystem servers' capabilities requires a service partner who thoroughly understands your server technology and systems environment. HP Services, an industry leader in provision of multi vender support solutions provides a range of support services designed to meet the varying needs of business. Whether an SMB or large global corporation HP has a HP BadeSystem server support offer to help you speedily deploy and maximize system uptime.
Recommended Service
Recommended Service ––––
Recommended ServiceRecommended Service
http://www.hp.com/go/bladesystem/powercalculator
SAN/Fabric switches for the HP c-Class BladeSystem are not covered under the c7000 and
Simplify ProLiant solution implementation, maintenance and management.
Support Service
Support Service ––––
Support ServiceSupport Service Deployment Service
Deployment Service
Deployment Service Deployment Service
Enhanced Service
Enhanced Service ––––
Enhanced ServiceEnhanced Service
Support Service
Support Service ––––
Support ServiceSupport Service
DA - 12790 Worldwide — Version 12 — July 14, 2008
4-Hour Response Coverage, 3-Year, 24 x 7, Same Business Day
––––
Installation and Start Up for HP BladeSystem Infrastructure
Optimize service level to increase IT performance and availability
HP Proactive BladeSystem Service, 1-Year
Page 12
QuickSpecs
HP BladeSystem c-Class Overview
Deployment Service
Deployment Service ––––
Deployment ServiceDeployment Service
Installation & Start-Up service for HP BladeSystem Infrastructure plus HP BladeSystem Enhanced Network Installation and Start-UP as per the Customer Description and/or Data Sheet. To be delivered on a scheduled basis 8am-5pm, M-F, excluding HP holidays.
For a complete listing of service offerings and information visit:
http://www.hp.com/services/bladesystemservices http://www.hp.com/go/proliant/carepack
HP BladeSystem c3000 Enclosure
HP BladeSystem c3000 Enclosure
HP BladeSystem c3000 EnclosureHP BladeSystem c3000 Enclosure
Enhanced Network Installation and Start-up for HP BladeSystem Switches
DA - 12790 Worldwide — Version 12 — July 14, 2008
Page 13
QuickSpecs
HP BladeSystem c3000 Enclosure
HP BladeSystem c3000 Enclosure
HP BladeSystem c3000 EnclosureHP BladeSystem c3000 Enclosure

Configuration Information Factory Integrated Models

NOTE:
NOTE:
NOTE: NOTE: ordered, HP recommends the use of an HP approved configurator. Contact your local sales representative for information on CTO product offerings and requirements. NOTE:
NOTE:
NOTE: NOTE: Configure-to-order server blades must start with a CTO Blade. NOTE:
NOTE:
NOTE: NOTE: NOTE:
NOTE:
NOTE: NOTE: For a complete configuration of the HP BladeSystem, please do the following:
Step 1: Select desired model, configuration and quantity of HP ProLiant server and Storage
Step 1: Select desired model, configuration and quantity of HP ProLiant server and Storage
Step 1: Select desired model, configuration and quantity of HP ProLiant server and StorageStep 1: Select desired model, configuration and quantity of HP ProLiant server and Storage blades
blades
bladesblades
NOTE:
NOTE:
NOTE: NOTE:
http://h18000.www1.hp.com/products/quickspecs/division/12534.html
NOTE:
NOTE:
NOTE: NOTE:
http://h18000.www1.hp.com/products/quickspecs/12587_div/12587_div.html
Step 2: Determine quantity of HP BladeSystem c-3000 Enclosures to purchase and choose
Step 2: Determine quantity of HP BladeSystem c-3000 Enclosures to purchase and choose
Step 2: Determine quantity of HP BladeSystem c-3000 Enclosures to purchase and chooseStep 2: Determine quantity of HP BladeSystem c-3000 Enclosures to purchase and choose Required Options
Required Options
Required OptionsRequired Options
(One of the following from each list unless otherwise noted):
NOTE:
NOTE:
NOTE: NOTE: Server blanks will be shipped in all empty bays.
Select Base Server Blade Enclosure Configuration
Select Base Server Blade Enclosure Configuration
Select Base Server Blade Enclosure ConfigurationSelect Base Server Blade Enclosure Configuration
HP BladeSystem BLc3000
HP BladeSystem BLc3000
HP BladeSystem BLc3000HP BladeSystem BLc3000 c-Class Server Blade
c-Class Server Blade
c-Class Server Bladec-Class Server Blade Enclosures
Enclosures
EnclosuresEnclosures
This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid configurations are
HP does not allow factory integration of options into standard models listed above.
This product offering does not support HP Factory Express Server Configuration Level 1. FIO indicates that this option is a Factory Installable Option.
For server blade information, please visit:
For Storage Blade information, please visit:
Each HP BladeSystem c3000 Server Blade Enclosure holds up to 8 half-height blades, or up to 4 full-height server blades.
Choose one of the following CTO enclosures
Choose one of the following CTO enclosures
Choose one of the following CTO enclosuresChoose one of the following CTO enclosures
HP BLc3000 CTO Enclosure
NOTE:
NOTE:
NOTE: NOTE:
HP BLc3000 CTO Enclosure
NOTE:
NOTE:
NOTE: NOTE:
CTO model includes 4 Active Cool Fans
CTO model includes 4 Active Cool Fans
––––
Tower
437507-B21
458034-B21
Select Required Options (Choose one of the following from each category unless otherwise
Select Required Options (Choose one of the following from each category unless otherwise
Select Required Options (Choose one of the following from each category unless otherwiseSelect Required Options (Choose one of the following from each category unless otherwise noted)
noted)
noted)noted)
Onboard Administrator
Onboard Administrator
Onboard AdministratorOnboard Administrator
Power Supplies
Power Supplies
Power SuppliesPower Supplies
HP BLc3000 Onboard Administrator, FIO
NOTE:
NOTE:
NOTE: NOTE:
HP BL3000 Tower Onboard Administrator, FIO
NOTE:
NOTE:
NOTE: NOTE:
HP 1200W High Efficiency AC Power Supply, CSCI 2007/8
NOTE:
NOTE:
NOTE:NOTE: NOTE:
NOTE:
NOTE:NOTE: step 2A of this QuickSpecs. NOTE:
NOTE:
NOTE:NOTE: additional power supplies, as determined by the use of the HP BladeSystem Power Calculator. NOTE:
NOTE:
NOTE:NOTE: (N+1) configuration; order 6 power supplies in an AC Redundant (N+N) configuration
Supports CTO Enclosure
Supports CTO Enclosure
Meets Climate Savers Computing Initiative, 2007-2008. Minimum 1 Power Supply required. For additional Power Supplies, please see
AC power supplies include a C13 to C14 PDU power cord. NOTE: Order
For a full enclosure, order 4 power supplies in a Power Supply Redundant
DA - 12790 Worldwide — Version 12 — July 14, 2008
––––
Rack (p/n 437507-B21) only.
––––
Tower (p/n 458034-B21) only.
448589-B21
461514-B21
437572-B21
Page 14
QuickSpecs
Configuration Information Factory Integrated Models
Step 2A: Select additional optional enclosure options:
Step 2A: Select additional optional enclosure options:
Step 2A: Select additional optional enclosure options:Step 2A: Select additional optional enclosure options:
Additional C3000 Power
Additional C3000 Power
Additional C3000 PowerAdditional C3000 Power Supplies
Supplies
SuppliesSupplies
c-Class Active Cool Fan
c-Class Active Cool Fan
c-Class Active Cool Fanc-Class Active Cool Fan
HP c3000 Enclosure DVD
HP c3000 Enclosure DVD
HP c3000 Enclosure DVDHP c3000 Enclosure DVD Drive
Drive
DriveDrive HP c3000 KVM Modules
HP c3000 KVM Modules
HP c3000 KVM ModulesHP c3000 KVM Modules and Adapters
and Adapters
and Adaptersand Adapters
Other Enclosure Options
Other Enclosure Options
Other Enclosure OptionsOther Enclosure Options
HP Insight Control for
HP Insight Control for
HP Insight Control forHP Insight Control for BladeSystem Licenses
BladeSystem Licenses
BladeSystem LicensesBladeSystem Licenses Optional Power Cords
Optional Power Cords
Optional Power CordsOptional Power Cords
HP 1200W High Efficiency AC Common Slot Power Supply
NOTE:
NOTE:
Meets Climate Savers Computing Initiative, 2007-2008
NOTE:NOTE: NOTE:
NOTE:
AC power supplies include a C13 to C14 PDU power cord.
NOTE:NOTE: NOTE:
NOTE:
Order additional power supplies, as determined by the use of the HP
NOTE:NOTE: BladeSystem Power Calculator. NOTE:
NOTE:
For a full enclosure, order 4 power supplies in a Power Supply Redundant
NOTE:NOTE: (N+1) configuration; order 6 power supplies in an AC Redundant (N+N) configuration.
HP BL c-Class Active Cool Fan
NOTE:
NOTE:
NOTE: NOTE:
HP c3000 Enclosure DVD Drive
HP c3000 KVM module
NOTE:
NOTE:
NOTE: NOTE:
KVM Adapter for KVM switches with internal media drives
NOTE:
NOTE:
NOTE: NOTE: accepting RJ45 cables (P/N's AF600A, AF601A, or AF602A). Please see Options section of this QuickSpecs for additional product information.
HP BLc3000 Rack Rails
NOTE:
NOTE:
NOTE: NOTE:
HP c-Class Insight Control Environment for BladeSystem, 8 server blade licenses including 1 year of 24x7 Technical Support and Updates
Power Cord, C20 C13, 15A, Universal Jumper, 2m
NOTE:
NOTE:
NOTE:NOTE:
For a full enclosure, order 2 additional (6 total) Active Cool Fans.
For use with in-rack KVM switches.
Order one KVM Adapter per c3000 enclosure, to support KVM switches
For use with the c3000 rack-able (437507-B21) model.
For use with PDU's accepting C20 power cords.
HP BladeSystem c3000 Enclosure
HP BladeSystem c3000 Enclosure
HP BladeSystem c3000 EnclosureHP BladeSystem c3000 Enclosure
437572-B21
412140-B21
437577-B21
437575-B21
AF603A
437576-B21
439034-B23
AF590A
Step 3: Select additional (one to four) interconnects.
Step 3: Select additional (one to four) interconnects.
Step 3: Select additional (one to four) interconnects.Step 3: Select additional (one to four) interconnects.
NOTE:
NOTE:
Interconnect Bay 1 must contain one of the "Ethernet" interconnect modules For additional information on Interconnect
NOTE:NOTE: Options, please visit: HP BladeSystem c-Class Interconnect QuickSpecs:
HP BladeSystem
HP BladeSystem
HP BladeSystemHP BladeSystem c-Class Ethernet
c-Class Ethernet
c-Class Ethernetc-Class Ethernet Interconnects
Interconnects
InterconnectsInterconnects
HP 1/10Gb-F Virtual Connect Ethernet Module for c-Class BladeSystem HP BladeSystem c-Class Virtual Connect 1Gb SX SFP HP BladeSystem c-Class Virtual Connect 1Gb RJ-45 SFP Opt Kit HP 1Gb Virtual Connect Ethernet Module for c-Class BladeSystem
NOTE:
NOTE:
NOTE: NOTE:
Ethernet Pass-Through Module for HP BladeSystem Cisco Catalyst Blade Switch 3120X for HP Cisco Catalyst Blade Switch 3120G for HP Cisco Catalyst Blade Switch 3020 for HP c-Class BladeSystem GbE2c Ethernet Blade Switch for HP c-Class BladeSystem GbE2c Layer 2/3 Ethernet Blade Switch for HP c-Class BladeSystem HP 1:10 Gb Ethernet BL-c Switch HP 10Gb Ethernet BL-c Switch
NOTE:
NOTE:
NOTE: NOTE: one (1) HP NC512m Dual Port 10GbE Multifunction BL-c Adapter (P/N 440910-B21) per server blade that requires 10Gbit support. NOTE:
NOTE:
NOTE: NOTE: above interconnects must be ordered in quantities of two for redundant configurations.
This module must be upgraded to VC Management firmware v1.20 or greater.
The purchase the HP 10Gb Ethernet BL-c Switch, also requires the purchase of
The HP BladeSystem c-Class Network Interconnects ship as single units. The
http://h18000.www1.hp.com/products/quickspecs/12524_div/12524_div.html
447047-B21 453151-B21 453154-B21 399593-B22
406740-B21 451439-B21 451438-B21 410916-B21 410917-B21 438030-B21 438031-B21 445860-B21
DA - 12790 Worldwide — Version 12 — July 14, 2008
Page 15
QuickSpecs
Configuration Information Factory Integrated Models
HP BladeSystem c3000 Enclosure
HP BladeSystem c3000 Enclosure
HP BladeSystem c3000 EnclosureHP BladeSystem c3000 Enclosure
HP BladeSystem
HP BladeSystem
HP BladeSystemHP BladeSystem c-Class FC SAN
c-Class FC SAN
c-Class FC SANc-Class FC SAN Interconnects
Interconnects
InterconnectsInterconnects
HP BladeSystem
HP BladeSystem
HP BladeSystemHP BladeSystem InfiniBand Interconnects
InfiniBand Interconnects
InfiniBand InterconnectsInfiniBand Interconnects
HP NC512m Dual Port 10GbE Multifunction BL-c Adapter
NOTE:
NOTE:
An NC512m network adapter card is required for each server blade
NOTE:NOTE: connecting to the HP 10Gb Ethernet BL-c Switch NOTE:
NOTE:
NOTE: NOTE: type II x8 PCI Express mezzanine slots and one adapter per a type II x8 PCI Express mezzanine slot in a half height server. For more information, see the Mezzanine Slot Compatibility matrix within the HP NC512m Dual Port 10GbE Multifunction BL-c Adapter QuickSpecs:
http://h18004.www1.hp.com/products/servers/networking/nc512m/index.html
NOTE:
NOTE:
NOTE:NOTE: card and supports a maximum of 32 GB for Windows and 64 GB for Linux. NOTE: Each port on the NC512m transmits from the server only at 20 Gbps full duplex per port.
HP 4Gb Virtual Connect Fibre Channel Module for c-Class BladeSystem 16 port FC Pass-thru Module for c-Class BladeSystem HP 8/12c SAN Switch c-Class BladeSystem HP 8/24c SAN Switch c-Class BladeSystem HP 8/24c SAN Switch Power Pack c-Class Enclosure HP 8/12c Switch 12-pt c-Class Upgrade LTU HP Brocade 4/12 SAN Switch HP Brocade 4/24 SAN Switch Power Pack HP Brocade 4/24 SAN Switch HP Brocade 4/12 SAN Switch Upgrade LTU Cisco MDS 9124e 12 port Fabric Switch HP 4X DDR IB Switch Module for HP c-Class BladeSystem
Two NC512m adapters are supported per ProLiant c-Class full height server in
.
The NC512m requires a minimum of 2 GB of server memory per NC512m
440910-B21
409513-B21 403626-B21
AJ820A AJ821A AJ822A
T5517A AE370A AE371A AE372A AE373A
AG641A
410398-B21
Step 4: Select rack power distribution for installing the enclosure into a rack.
Step 4: Select rack power distribution for installing the enclosure into a rack.
Step 4: Select rack power distribution for installing the enclosure into a rack.Step 4: Select rack power distribution for installing the enclosure into a rack.
NOTE:
NOTE:
For use with the c3000 rack-able model only.
NOTE:NOTE: NOTE:
NOTE:
NOTE: NOTE: acceptable.
HP Monitored Power
HP Monitored Power
HP Monitored PowerHP Monitored Power Distribution Unit
Distribution Unit
Distribution UnitDistribution Unit HP Modular Power
HP Modular Power
HP Modular PowerHP Modular Power Distribution Unit
Distribution Unit
Distribution UnitDistribution Unit
Uninterruptible Power
Uninterruptible Power
Uninterruptible PowerUninterruptible Power Systems - Rack Mountable
Systems - Rack Mountable
Systems - Rack MountableSystems - Rack Mountable
A pair of PDUs must be ordered for AC Feed redundancy. If AC redundancy is not required, a single PDU or UPS may be
HP 8.6 kVA Monitored PDU, 30A (NA/JPN) HP 11 kVA Monitored PDU 16A (INTL) HP 8.3kVA Modular Distribution Unit 40 Amp (NA/JPN) HP 8.3kVA Modular Distribution Unit 40 Amp (Intl) HP 7.3kVA Modular Distribution Unit 32 Amp (Intl) HP 4.9kVA Modular Distribution Unit 24 Amp (NA/JPN) HP Two C-13 PDU Extension Bars HP rack-mountable R5500 UPS (5000VA / 4500 watts)
NOTE:
NOTE:
The R5500 includes four c-13 PDU Extension bars.
NOTE:NOTE: NOTE:
NOTE:
The R5500 supports 4 power supplies in the Power Supply Redundant (N+1)
NOTE:NOTE: power mode
HP Rack to Tower 5500 Conversion Kit
AF504A AF508A
252663-D73
252663-B32 252663-B31
252663-D72
AF500A AF426A
AF442A
DA - 12790 Worldwide — Version 12 — July 14, 2008
Page 16
QuickSpecs
Configuration Information Factory Integrated Models
HP BladeSystem c3000 Enclosure
HP BladeSystem c3000 Enclosure
HP BladeSystem c3000 EnclosureHP BladeSystem c3000 Enclosure
Step 5: Select Wall Outlet Power Cords
Step 5: Select Wall Outlet Power Cords
Step 5: Select Wall Outlet Power Cords Step 5: Select Wall Outlet Power Cords
NOTE:
NOTE:
NOTE: NOTE: NOTE:
NOTE:
NOTE: NOTE: required, safety regulations require the use of a PDU or a UPS between the c3000 enclosures power supplies and wall outlets. NOTE:
NOTE:
NOTE: NOTE: required if you plan to plug the power supplies into a PDU or UPS.
Order the appropriate power cord for your countries standard electrical outlets.
Order the appropriate power cord for your countries standard electrical outlets.
Order the appropriate power cord for your countries standard electrical outlets.Order the appropriate power cord for your countries standard electrical outlets. Wall Outlet Power Cords
Wall Outlet Power Cords
Wall Outlet Power CordsWall Outlet Power Cords
Select one wall outlet power cord for each power supply when plugging the power supplies into a wall outlet. Wall Outlet power cords should only be used with low-line (100v to 110V) power sources. If high-line power outlets are
A standard PDU power cord(c13 to C14) is included with each AC power supply, so these wall outlet power cords are not
Nema 5-15P to IEC320-C13, low voltage (6 ft/2 m), North America
NOTE:
NOTE:
HP Power cord (6 ft) 1.83 meter 10A C-13-UL domestic power cord, for
NOTE:NOTE: grounded USA 110V wall outlets.
Power Cord, C13,10A , 1.83m, Japan
NOTE:
NOTE:
NOTE: NOTE: wall outlets.
Power Cord, C20 C13, 15A, Universal Jumper, 2m
NOTE:
NOTE:
NOTE:NOTE:
HP Power cord 2 meter C13 Japan low-line power cord, for Japanese 100V
For use with PDUs accepting C20 power cords.
(For connection to standard wall outlets)
AF556A
AF572A
AF590A
DA - 12790 Worldwide — Version 12 — July 14, 2008
Page 17
QuickSpecs

Related Options

c3000 Enclosure Options
c3000 Enclosure Options
c3000 Enclosure Optionsc3000 Enclosure Options
c3000 Rack Brackets
c3000 Rack Brackets
c3000 Rack Bracketsc3000 Rack Brackets
c-Class Power Supply
c-Class Power Supply
c-Class Power Supplyc-Class Power Supply
HP c-Class Replacement Enclosure Miscellaneous Blanks kit
NOTE:
NOTE:
NOTE: NOTE: KVM option blank, DVD Blank, Active Cool Fan Blank, and c3000 minidivider) NOTE:
NOTE:
NOTE: NOTE:
HP c-Class Replacement Server Blank and Coupler Option Kit (contains 1 x half­height server blank with coupler)
NOTE:
NOTE:
NOTE: NOTE: full-height server blank. NOTE:
NOTE:
NOTE: NOTE:
HP c3000 Rack Shipping Bracket Kit
NOTE:
NOTE:
NOTE: NOTE: order 1 kit per enclosure.
HP 1200W High Efficiency AC Common Slot Power Supply
NOTE:
NOTE:
Meets Climate Savers Computing Initiative, 2007-2008.
NOTE:NOTE: NOTE:
NOTE:
AC power supplies include a C13 to C14 PDU power cord.
NOTE:NOTE: NOTE:
NOTE:
For c-3000 Low-line Power Cords, please order the appropriate power cord
NOTE:NOTE: for your countries standard electrical outlets. Please see Step 5 above for power cord part numbers.
HP BladeSystem c3000 Enclosure
HP BladeSystem c3000 Enclosure
HP BladeSystem c3000 EnclosureHP BladeSystem c3000 Enclosure
Contains 1 each of Power Supply Blank, Interconnect Module Blank, Local
This kit should only be ordered to replace lost or damaged blanks.
The coupler allows half-height server blanks to be coupled together to create a
This kit should only be ordered to replace lost or damaged blanks.
Required when shipping a c3000 enclosure in a HP 10000 series rack. Please
412148-B21
412150-B21
461384-B21
437572-B21
c-Class Active Cool Fans
c-Class Active Cool Fans
c-Class Active Cool Fansc-Class Active Cool Fans
HP BLc3000 Enclosure
HP BLc3000 Enclosure
HP BLc3000 EnclosureHP BLc3000 Enclosure DVD Drive
DVD Drive
DVD DriveDVD Drive
HP c3000 KVM Module
HP c3000 KVM Module
HP c3000 KVM ModuleHP c3000 KVM Module and Adapters
and Adapters
and Adaptersand Adapters
Other c3000 enclosure
Other c3000 enclosure
Other c3000 enclosureOther c3000 enclosure options
options
optionsoptions
HP c-Class Active Cool Fan
NOTE:
NOTE:
NOTE: NOTE: NOTE:
NOTE:
NOTE: NOTE:
HP c3000 Enclosure DVD Drive
HP c3000 KVM Module
NOTE:
NOTE:
NOTE: NOTE:
KVM Adapter for KVM switches with internal media drives
NOTE:
NOTE:
NOTE:NOTE: accepting RJ45 cables (P/N's AF600A, AF601A, or AF602A). Please see Options section of this QuickSpecs for additional product information.
HP BLc3000 Rack Rails
NOTE:
NOTE:
NOTE: NOTE:
For a full enclosure, order 2 additional (6 total) Active Cool Fans. Supports the c7000 and c3000 enclosures.
For use with in-rack KVM switches
Order one KVM Adapter per c3000 enclosure, to support KVM switches
For use with the c3000 rack models.
412140-B21
437577-B21
437575-B21
AF603A
437576-B21
DA - 12790 Worldwide — Version 12 — July 14, 2008
Page 18
QuickSpecs
Related Options
HP BladeSystem
HP BladeSystem
HP BladeSystemHP BladeSystem c-Class Ethernet
c-Class Ethernet
c-Class Ethernetc-Class Ethernet Interconnects
Interconnects
InterconnectsInterconnects
HP BladeSystem
HP BladeSystem
HP BladeSystemHP BladeSystem c-Class FC SAN
c-Class FC SAN
c-Class FC SANc-Class FC SAN Interconnects
Interconnects
InterconnectsInterconnects
HP 1/10Gb-F Virtual Connect Ethernet Module for c-Class BladeSystem HP BladeSystem c-Class Virtual Connect 1Gb SX SFP HP BladeSystem c-Class Virtual Connect 1Gb RJ-45 SFP Option Kit HP 1Gb Virtual Connect Ethernet Module for c-Class BladeSystem
NOTE:
NOTE:
NOTE: NOTE:
Ethernet Pass-Through Module for HP BladeSystem
NOTE:
NOTE:
NOTE: NOTE: ordered in quantities of two.
Cisco Catalyst Blade Switch 3120X for HP Cisco Catalyst Blade Switch 3120G for HP Cisco Catalyst Blade Switch 3020 for HP c-Class BladeSystem GbE2c Ethernet Blade Switch for HP c-Class BladeSystem HP GbE2c Layer 2/3 Ethernet Blade Switch HP 1:10Gb Ethernet BL-c switch
HP 4Gb Virtual Connect Fibre Channel Module for c-Class BladeSystem 16 port FC Pass-through Module for c-Class BladeSystem HP 8/12c SAN Switch c-Class BladeSystem HP 8/24c SAN Switch c-Class BladeSystem HP 8/24c SAN Switch Power Pack c-Class Enclosure HP 8/12c Switch 12-pt c-Class Upgrade LTU HP Brocade 4/12 SAN Switch HP Brocade 4/24 SAN Switch Power Pack HP Brocade 4/24 SAN Switch HP Brocade 4/12 SAN Switch Upgrade LTU
HP BladeSystem c3000 Enclosure
HP BladeSystem c3000 Enclosure
HP BladeSystem c3000 EnclosureHP BladeSystem c3000 Enclosure
This module must be upgraded to VC Management firmware v1.20 or greater.
The Ethernet Pass-Thru Module is shipped as a single unit and should be
447047-B21 453151-B21 453154-B21 399593-B22
406740-B21
451439-B21 451438-B21 410916-B21 410917-B21 438030-B21 438031-B21
409513-B21 403626-B21
AJ820A AJ821A AJ822A
T5517A AE370A AE371A AE372A AE373A
Cisco MDS 9124e Fabric
Cisco MDS 9124e Fabric
Cisco MDS 9124e FabricCisco MDS 9124e Fabric Switch for HP c-Class
Switch for HP c-Class
Switch for HP c-ClassSwitch for HP c-Class BladeSystem
BladeSystem
BladeSystemBladeSystem
HP BladeSystem
HP BladeSystem
HP BladeSystemHP BladeSystem InfiniBand Interconnects
InfiniBand Interconnects
InfiniBand InterconnectsInfiniBand Interconnects
Cisco MDS 9124e 12-port Fabric Switch Cisco MDS 9124e 24-port Fabric Switch Cisco MDS 9124e 12-port Upgrade LTU
HP 4X DDR IB Switch Module for HP c-Class BladeSystem
DA - 12790 Worldwide — Version 12 — July 14, 2008
AG641A AG642A
T5169A
410398-B21
Page 19
QuickSpecs
Related Options
HP Insight Control
HP Insight Control
HP Insight ControlHP Insight Control Environment for
Environment for
Environment forEnvironment for BladeSystem Management
BladeSystem Management
BladeSystem ManagementBladeSystem Management Suite
Suite
SuiteSuite
NOTE:
NOTE:
NOTE: NOTE: products. Please see the appropriate Insight Control QuickSpecs for additional information.
HP Insight Control Environment for BladeSystem
HP Insight Control Environment for BladeSystem
HP Insight Control Environment for BladeSystemHP Insight Control Environment for BladeSystem HP Insight Control Environment for BladeSystem, No Media 1-Server License including
1 year of 24x7 Technical Support and Updates
NOTE:
NOTE:
NOTE: NOTE: shipment. The license entitlement certificate must be redeemed online or via fax in order to obtain the license activation key(s). Includes one year of 24 x 7 HP Software Technical Support and Update Service.
HP Insight Control Management Software Media Kit
NOTE:
NOTE:
NOTE: NOTE: Manager and Essentials software products and components licensed by Insight Control Management suites. Uses an integrated installer to perform quick and accurate software installation and updates.
NOTE:
NOTE:
NOTE: NOTE: one year of 24 x 7 HP Software Technical Support and Update Service. NOTE:
NOTE:
NOTE: NOTE:
http://h18000.www1.hp.com/products/quickspecs/12631_div/12631_div.html
HP Insight Control Environment for Linux
HP Insight Control Environment for Linux
HP Insight Control Environment for LinuxHP Insight Control Environment for Linux HP Insight Control Environment for Linux, No Media, 8-Server license, including One
year of 24x7 Technical Support and Updates, FIO
NOTE:
NOTE:
NOTE: NOTE: a single activation key. Customer will receive a printed license entitlement certificate via physical shipment. The license entitlement certificate must be redeemed online or via fax in order to obtain the license activation key(s). Includes one year of 24 x 7 HP Software Technical Support and Update Service. For Factory Integration only. Orderable only with c-Class blade enclosure (c3000 or c7000).
NOTE:
NOTE:
NOTE: NOTE: Manager License kits, please visit:
http://h18000.www1.hp.com/products/quickspecs/13019_div/13019_div.html
iLO Power Management Pack for BladeSystem
iLO Power Management Pack for BladeSystem
iLO Power Management Pack for BladeSystemiLO Power Management Pack for BladeSystem HP iLO Power Management Pack for BladeSystem, No Media, 1-Server License
including 1 year of 24x7 Technical Support and Updates
NOTE:
NOTE:
NOTE: NOTE: Customer will receive a printed license entitlement certificate via physical shipment. The license entitlement certificate must be redeemed online or via fax in order to obtain the license activation key(s). Includes one year of 24 x 7 HP Software Technical Support and Update Service.
NOTE:
NOTE:
NOTE: NOTE:
http://h18000.www1.hp.com/products/quickspecs/12632_div/12632_div.html
HP BladeSystem c3000 Enclosure
HP BladeSystem c3000 Enclosure
HP BladeSystem c3000 EnclosureHP BladeSystem c3000 Enclosure
Electronic licensing options are available for Insight Control suites software
Customer will receive a printed license entitlement certificate via physical
Insight Control Management DVD media without licenses. Contains Insight
Contains 1 license for each of RDP, PMP, VPM, IPM and iLO Select. Includes
For additional License Kits, please see the QuickSpecs at:
This part number can be used to purchase eight (8) server blade licenses with
For additional information regarding the HP Virtual Connect Enterprise
This option kit includes 1 license for iLO Select and Insight Power Manager.
For additional HP Insight Power Manager Packs please see the QuickSpecs at:
453484-B21
436222-B21
464429-B21
442937-B21
Server Management Stand
Server Management Stand
Server Management StandServer Management Stand Alone Software Product –
Alone Software Product –
Alone Software Product –Alone Software Product – ProLiant Essentials
ProLiant Essentials
ProLiant EssentialsProLiant Essentials
NOTE:
NOTE:
NOTE: NOTE: products. Please see the appropriate ProLiant Essentials QuickSpecs for additional information.
Deploy
Deploy
DeployDeploy ProLiant Essentials Rapid Deployment Pack
ProLiant Essentials Rapid Deployment Pack
ProLiant Essentials Rapid Deployment PackProLiant Essentials Rapid Deployment Pack ProLiant Essentials Rapid Deployment Pack No Media 1-Server License including 1
year of 24x7 Technical Support and Updates
NOTE:
NOTE:
NOTE: NOTE:
Electronic licensing options are available for select ProLiant Essentials software
This license allows 1 server to be deployed and managed via RDP. Customer
DA - 12790 Worldwide — Version 12 — July 14, 2008
452151-B21
Page 20
QuickSpecs
Related Options
will receive a printed license entitlement certificate via physical shipment. The license entitlement certificate must be redeemed online or via fax in order to obtain the license activation key(s). Includes one year of 24 x 7 HP Software Technical Support and Update Service.
NOTE:
NOTE:
NOTE: NOTE: see the QuickSpecs at:
http://h18000.www1.hp.com/products/quickspecs/11053_div/11053_div.html
HP Server Migration Pack – Universal Edition
HP Server Migration Pack – Universal Edition
HP Server Migration Pack – Universal EditionHP Server Migration Pack – Universal Edition HP Server Migration Pack – Universal Edition, No Media, Physical / Virtual to ProLiant
Single Migration License, including 1 year of 24x7 Technical Support
NOTE:
NOTE:
NOTE: NOTE: Customer will receive a printed license entitlement certificate and documentation via physical shipment. The license entitlement certificate must be redeemed online or via fax in order to obtain the license activation key(s). Includes one year of 24 x 7 HP Software Technical Support Service
HP Server Migration Pack – Universal Edition, No Media, Physical / Virtual to Virtual Single Migration License, including 1 year of 24x7 Technical Support
NOTE:
NOTE:
NOTE: NOTE: Customer will receive a printed license entitlement certificate and documentation via physical shipment. The license entitlement certificate must be redeemed online or via fax in order to obtain the license activation key(s). Includes one year of 24 x 7 HP Software Technical Support.
HP Server Migration Pack – Universal Edition, No Media, 1-Year Unlimited Migration License, including 1 year of 24x7 Technical Support
NOTE:
NOTE:
NOTE: NOTE: virtual, virtual to virtual, and virtual to ProLiant) for one year. Customer will receive a printed license entitlement certificate and documentation via physical shipment. The license entitlement certificate must be redeemed online or via fax in order to obtain the license activation key(s). Includes one year of 24 x 7 HP Software Technical Support Service.
NOTE:
NOTE:
NOTE: NOTE:
http://h18000.www1.hp.com/products/quickspecs/12855_div/12855_div.html
Monitor
Monitor
MonitorMonitor HP Insight Dynamics - VSE without Insight Control Environment, 1-server license
including 1 year of 24x7 Technical Support and Updates
NOTE:
NOTE:
This license supports HP ProLiant ML/DL and c-Class Blade servers. Customer
NOTE:NOTE: will receive a printed license entitlement certificate via physical shipment. NOTE:
NOTE:
HP Insight Dynamics - VSE Suite supports the HP ProLiant ML/DL 300, 500,
NOTE:NOTE: 700 series servers and HP ProLiant Blade servers.
HP Insight Dynamics - VSE with Insight Control Environment, 1-server license including 1 year of 24x7 Technical Support and Updates
NOTE:
NOTE:
This license supports HP ProLiant c-Class Blade servers. Customer will receive
NOTE:NOTE: a printed license entitlement certificate via physical shipment.
NOTE:
NOTE:
For additional information regarding the HP Insight Dynamic - VSE, please
NOTE:NOTE: visit:
http://h18000.www1.hp.com/products/quickspecs/13050_div/13050_div.html
Control
Control
ControlControl Integrated Lights-Out Select Pack
Integrated Lights-Out Select Pack
Integrated Lights-Out Select PackIntegrated Lights-Out Select Pack ProLiant Essentials Integrated Lights-Out Select Pack, No Media, 1-Server License
NOTE:
NOTE:
NOTE: NOTE:
http://h18000.www1.hp.com/products/quickspecs/12362_div/12362_div.html
HP BladeSystem c3000 Enclosure
HP BladeSystem c3000 Enclosure
HP BladeSystem c3000 EnclosureHP BladeSystem c3000 Enclosure
For additional ProLiant Essentials Rapid Deployment Pack License Kits- please
This license allows 1 physical to ProLiant or virtual to ProLiant migration.
.
This license allows 1 physical to virtual or virtual to virtual migration.
This license allows unlimited migrations (physical to ProLiant, physical to
For additional License Kits, please see the QuickSpecs at:
For additional License Kits, please see the QuickSpecs at:
460750-B21
460753-B21
460756-B21
483531-B21
483534-B21
452158-B21
DA - 12790 Worldwide — Version 12 — July 14, 2008
Page 21
QuickSpecs
Related Options
Featuring
Featuring
FeaturingFeaturing servers and ProLiant ML/DL servers.
NOTE:
NOTE:
NOTE: NOTE: the QuickSpecs at:
http://h18000.www1.hp.com/products/quickspecs/12362_div/12362_div.html
Optimize
Optimize
OptimizeOptimize HP Insight Power Manager (IPM)
HP Insight Power Manager (IPM)
HP Insight Power Manager (IPM)HP Insight Power Manager (IPM) HP Insight Power Manager, No Media, 1-Server License, including 1 year of 24x7
Technical Support and Updates
NOTE:
NOTE:
NOTE: NOTE: Select license on each managed server. Customer will receive a printed license entitlement certificate via physical shipment. The license entitlement certificate must be redeemed online or via fax in order to obtain the license activation key(s). Includes one year of 24 x 7 HP Software Technical Support and Update Service.
NOTE:
NOTE:
NOTE: NOTE:
http://h18000.www1.hp.com/products/quickspecs/12623_div/12623_div.html
ProLiant Essentials Virtual Machine Management Pack
ProLiant Essentials Virtual Machine Management Pack
ProLiant Essentials Virtual Machine Management PackProLiant Essentials Virtual Machine Management Pack ProLiant Essentials Virtual Machine Management Pack, No Media, 1-Server License,
including 1 year of 24x7 Technical Support and Updates
NOTE:
NOTE:
NOTE: NOTE: shipment. The license entitlement certificate must be redeemed online or via fax in order to obtain the license activation key(s). Includes one year of 24 x 7 HP Software Technical Support and Update Service.
NOTE:
NOTE:
NOTE: NOTE: see the QuickSpecs at:
http://h18000.www1.hp.com/products/quickspecs/12328_div/12328_div.html
NOTE:
NOTE:
NOTE: NOTE: Value Packs. Refer to: ProLiant Essentials Value Pack product QuickSpecs for more information. NOTE:
NOTE:
NOTE: NOTE: following URL:
HP BladeSystem c3000 Enclosure
HP BladeSystem c3000 Enclosure
HP BladeSystem c3000 EnclosureHP BladeSystem c3000 Enclosure
: Sophisticated remote control and security features for HP BladeSystem
For additional ProLiant Essentials Integrated Lights-Out Value Packs please see
Customers purchasing this upgrade must already have an iLO Advanced or
For additional HP Insight Power Manager Packs please see the QuickSpecs at:
Customer will receive a printed license entitlement certificate via physical
For additional ProLiant Virtual Machine Management Pack License Kits please
Flexible and volume quantity license kits are available for ProLiant Essentials
http://www.hp.com/servers/proliantessentials
For more information regarding ProLiant Essentials Software, please see the
http://www.hp.com/servers/proliantessentials
or the various
.
452677-B21
452153-B21
HP Virtual Connect
HP Virtual Connect
HP Virtual ConnectHP Virtual Connect Enterprise Manager
Enterprise Manager
Enterprise ManagerEnterprise Manager
HP Virtual Connect Enterprise Manager for BL-c3000, No Media, 1-Enclosure License including 1 year of 24x7 Technical Support and Updates.
NOTE:
NOTE:
NOTE: NOTE: Customer will receive a printed license entitlement certificate via physical shipment. The license entitlement certificate must be redeemed online or via fax to obtain the license activation key(s). Includes one year of 24 x 7 HP Software Technical Support and Update Service.
NOTE:
NOTE:
NOTE: NOTE: Manager License kits, please visit:
http://h18000.www1.hp.com/products/quickspecs/12860_div/12860_div.html
This license allows 1 BL-c3000 enclosure to be managed with VCEM.
For additional information regarding the HP Virtual Connect Enterprise
DA - 12790 Worldwide — Version 12 — July 14, 2008
459867-B21
Page 22
QuickSpecs
Related Options
HP c-Class Storage
HP c-Class Storage
HP c-Class StorageHP c-Class Storage Blades
Blades
BladesBlades
HP c-Class Tape Blades
HP c-Class Tape Blades
HP c-Class Tape BladesHP c-Class Tape Blades
HP PCI Expansion Blade
HP PCI Expansion Blade
HP PCI Expansion BladeHP PCI Expansion Blade
HP StorageWorks SB40c storage blade
NOTE:
NOTE:
NOTE: NOTE: blade, please visit:
http://h18000.www1.hp.com/products/quickspecs/12587_div/12587_div.html
HP PCI Express Mezzanine pass-thru card for HP BladeSystem
NOTE:
NOTE:
NOTE: NOTE: 411243-B21) with HP c-Class BladeSystem full-height server blades.
HP StorageWorks Ultrium 448c Tape Blade HP StorageWorks SB920c Tape Blade HP PCI Express Mezzanine pass-thru card for HP BladeSystem
NOTE:
NOTE:
NOTE: NOTE: B21) is required when installing a tape blade adjacent to a full-height server blade
NOTE:
NOTE:
NOTE: NOTE: configuration information at:
http://h18000.www1.hp.com/products/quickspecs/12729_div/12729_div.html
PCI Expansion Blade
NOTE:
NOTE:
NOTE: NOTE:
http://h18000.www1.hp.com/products/quickspecs/12753_div/12753_div.html
HP BladeSystem c3000 Enclosure
HP BladeSystem c3000 Enclosure
HP BladeSystem c3000 EnclosureHP BladeSystem c3000 Enclosure
For additional information regarding the HP StorageWorks SB40c storage
The mezzanine card is needed to support the SB40c storage blade (P/N
The HP PCI Express Mezzanine Pass-Thru Card for HP BladeSystem (431643-
Please see the HP Tape Blades QuickSpecs for additional options and
For additional information regarding the HP PCI Expansion Blade, please visit:
411243-B21
431643-B21
440947-B21
AJ401A
431643-B21
448018-B21
HP StorageWorks AIO
HP StorageWorks AIO
HP StorageWorks AIOHP StorageWorks AIO SB600c shared storage
SB600c shared storage
SB600c shared storageSB600c shared storage blade
blade
bladeblade
HP Monitored Power
HP Monitored Power
HP Monitored PowerHP Monitored Power Distribution Unit
Distribution Unit
Distribution UnitDistribution Unit
HP Modular Power
HP Modular Power
HP Modular PowerHP Modular Power Distribution Unit
Distribution Unit
Distribution UnitDistribution Unit
Optional Power Cords
Optional Power Cords
Optional Power CordsOptional Power Cords
HP StorageWorks AiO SB600c Storage Blade – 1.16TB
NOTE:
NOTE:
NOTE: NOTE: be either NAS (file-based shared storage or iSCSI Shared Storage connected to server blades within the enclosure using an Ethernet switch in the enclosures interconnect bays. NOTE:
NOTE:
NOTE: NOTE: Storage Blade, please visit:
http://h18000.www1.hp.com/products/quickspecs/12786_div/12786_div.html
HP StorageWorks Storage Mirroring for AiO Edition Software
NOTE:
NOTE:
NOTE: NOTE: different locations. This is host-based data replication software for disaster recovery and data protection. NOTE:
NOTE:
NOTE: NOTE:
HP 8.6 kVA Monitored PDU, 30A (NA/JPN) HP 11 kVA Monitored PDU 16A (INTL)
HP 8.3kVA Modular Distribution Unit 40 Amp (NA/JPN) HP 8.3kVA Modular Distribution Unit 40 Amp (Intl) HP 7.3kVA Modular Distribution Unit 32 Amp (Intl) HP 4.9kVA Modular Distribution Unit 24 Amp (NA/JPN) HP Two C-13 PDU Extension Bars Power Cord, C20 C13, 15A, Universal Jumper, 2m
NOTE:
NOTE:
NOTE:NOTE:
Shared storage blade for server blades within the enclosure. The SB600c can
For additional information regarding the HP StorageWorks AiO SB600c
This optional software is for mirroring data between AiO Storage blades in
Order 1 unit for each AiO SB600c Storage Blade.
For use with PDU's that accept C20 power cords.
AG780A
T5321A
AF504A AF508A
252663-D73
252663-B32 252663-B31
252663-D72
AF500A AF590A
DA - 12790 Worldwide — Version 12 — July 14, 2008
Page 23
QuickSpecs
Related Options
Uninterruptible Power
Uninterruptible Power
Uninterruptible PowerUninterruptible Power Systems - Rack Mountable
Systems - Rack Mountable
Systems - Rack MountableSystems - Rack Mountable
HP Rack 10000 Series
HP Rack 10000 Series
HP Rack 10000 SeriesHP Rack 10000 Series (Graphite Metallic)
HP Rack 10000 G2 Series
HP Rack 10000 G2 Series
HP Rack 10000 G2 SeriesHP Rack 10000 G2 Series (Graphite Metallic)
HP rack-mountable R5500 UPS (5000VA / 4500 watts)
NOTE:
NOTE:
NOTE: NOTE: NOTE:
NOTE:
NOTE: NOTE: power mode.
HP S10614 (14U) Rack Cabinet – Shock Pallet
10622 G2 (22U) Rack Cabinet Shock 10622 G2 (22U) Rack Cabinet Pallet 10642 G2 (42U) Rack Cabinet – Pallet 10642 G2 (42U) Rack Cabinet – Shock Pallet 10642 G2 (42U) Rack Cabinet – Crated 10642 G2 (42U) Rack Cabinet, with Extension – Shock Pallet 10642 G2 (42U) Rack Shock Pallet – for field racking (NA only) 10636 G2 (36U) Rack Cabinet – Shock Pallet 10636 G2 (36U) Rack Cabinet – Crated 10636 G2 (36U) Rack Cabinet, with Extension – Shock Pallet 10636 G2 (36U) Rack Cabinet, without door – Shock Pallet 10647 G2 (47U) Rack Cabinet – Pallet 10842 G2 (42U) Rack Cabinet Shock 10842 G2 (42U) Rack Cabinet Pallet
NOTE:
NOTE:
NOTE: NOTE: Technical Specifications such as height, width, depth, weight, and color:
http://h18000.www1.hp.com/products/quickspecs/12402_div/12402_div.html
(Worldwide) NOTE:
NOTE:
NOTE: NOTE: URL:
http://www.hp.com/go/rackandpower
HP BladeSystem c3000 Enclosure
HP BladeSystem c3000 Enclosure
HP BladeSystem c3000 EnclosureHP BladeSystem c3000 Enclosure
The R5500 includes four c-13 PDU Extension bars. The R5500 supports 4 power supplies in the Power Supply Redundant (N+1)
Please see the Rack 10000 G2 QuickSpecs for additional part numbers and
For additional information regarding Rack Cabinets, please see the following
.
AF426A
292302-B22
AF022A AF021A AF001A AF002A AF003A AF004A AF007A AF011A AF012A AF013A AF014A AF031A AF042A AF041A
Rack Options for Rack
Rack Options for Rack
Rack Options for RackRack Options for Rack 10000 G2 Series
10000 G2 Series
10000 G2 Series10000 G2 Series
HP 10642 G2 Front Door ALL HP 10636 G2 Front Door ALL 10642 G2 (42U) Side Panels (set of two) (Graphite Metallic) 10636 G2 (36U) Side Panels (set of two) (Graphite Metallic) 10642 Rear Extension Kit 10636 G2 Rear Extension Kit 600mm G2 Stabilizer Option Kit (Graphite) 800mm G2, Heavy Duty Stabilizer Option Kit (Graphite)
NOTE:
NOTE:
NOTE: NOTE:
HP 10000 G2 Rack Grounding Kit 600W 10K G2 Rack Tie Down
NOTE:
NOTE:
NOTE: NOTE: URL:
Supports 10000 G2 Series only.
For additional information regarding Rack Options, please see the following
http://www.hp.com/go/rackandpower
DA - 12790 Worldwide — Version 12 — July 14, 2008
.
AF009A AF019A AF054A AF056A AF058A AF060A AF062A AF068A
AF074A AF076A
Page 24
QuickSpecs
Related Options
HP Modular Cooling
HP Modular Cooling
HP Modular CoolingHP Modular Cooling System
System
SystemSystem
Data Protection
Data Protection
Data ProtectionData Protection
HP Modular Cooling System
The following options are supported in an Enterprise Backup Solution (EBS) environment with the HP BladeSystem c-Class enclosure. Please visit:
http://www.hp.com/go/ebs
HP StorageWorks MSL2024 Tape Library
HP StorageWorks MSL2024 Tape Library
HP StorageWorks MSL2024 Tape LibraryHP StorageWorks MSL2024 Tape Library HP StorageWorks MSL2024 1 LTO-4 Ultrium 1840 SCSI Drive Library HP StorageWorks MSL2024 1 LTO-4 Ultrium 1840 4GB FC Library HP StorageWorks MSL2024 1 LTO-4 Ultrium 1760 SCSI Drive Library HP StorageWorks MSL2024 1 LTO-3 Ultrium 960 SCSI Drive Library HP StorageWorks MSL2024 1 LTO-3 Ultrium 960 4GB FC Library HP StorageWorks MSL2024 1 LTO-3 Ultrium 920 SCSI Drive Library HP StorageWorks MSL2024 2 LTO-3 Ultrium 920 SCSI Drive Library HP StorageWorks MSL2024 1 LTO-2 Ultrium 448 SCSI Drive Library HP StorageWorks MSL2024 2 LTO-2 Ultrium 448 SCSI Drive Library HP StorageWorks MSL4048 Tape Library
HP StorageWorks MSL4048 Tape Library
HP StorageWorks MSL4048 Tape LibraryHP StorageWorks MSL4048 Tape Library HP StorageWorks MSL4048 1 LTO-4 Ultrium 1840 SCSI Drive Library HP StorageWorks MSL4048 2 LTO-4 Ultrium 1840 SCSI Drive Library HP StorageWorks MSL4048 1 LTO-4 Ultrium 1840 4GB FC Library HP StorageWorks MSL4048 2 LTO-4 Ultrium 1840 4GB FC Library HP StorageWorks MSL4048 2 LTO-4 Ultrium 1760 SCSI Drive Library HP StorageWorks MSL4048 1 LTO-2 Ultrium 448 SCSI Drive Library HP StorageWorks MSL4048 2 LTO-2 Ultrium 448 SCSI Drive Library HP StorageWorks MSL4048 1 LTO-3 Ultrium 920 SCSI Tape Library HP StorageWorks MSL4048 2 LTO-3 Ultrium 920 SCSI Tape Library HP StorageWorks MSL4048 1 LTO-3 Ultrium 960 SCSI Drive Library HP StorageWorks MSL4048 1 LTO-3 Ultrium 960 4GB FC Library HP StorageWorks MSL4048 2 LTO-3 Ultrium 960 SCSI Drive Library HP StorageWorks MSL4048 2 LTO-3 Ultrium 960 4GB FC Library HP StorageWorks MSL8096 Tape Library
HP StorageWorks MSL8096 Tape Library
HP StorageWorks MSL8096 Tape LibraryHP StorageWorks MSL8096 Tape Library HP StorageWorks MSL8096 2 LTO-4 Ultrium 1840 SCSI Drive Library HP StorageWorks MSL8096 2 LTO-4 Ultrium 1840 4GB FC Library HP StorageWorks MSL8096 2 LTO-3 Ultrium 960 4GB FC Library HP StorageWorks MSL8096 2 LTO-3 Ultrium 960 SCSI Library
NOTE:
NOTE:
Please reference the MSL Tape Library QuickSpecs at:
NOTE:NOTE:
http://www.hp.com/go/automation
complete solution; reference current compatibility information at:
http://www.hp.com/go/ebs
HP D2D Backup Systems
HP D2D Backup Systems
HP D2D Backup SystemsHP D2D Backup Systems HP StorageWorks D2D4004i Backup System
NOTE:
NOTE:
4.5TB of Disk Storage
NOTE:NOTE:
HP StorageWorks D2D4009i Backup System
NOTE:
NOTE:
9TB of Disk Storage
NOTE:NOTE:
HP StorageWorks D2D4004fc Backup System
NOTE:
NOTE:
4.5TB of Disk Storage
NOTE:NOTE:
for complete compatibility details.
for additional information needed to create a
HP BladeSystem c3000 Enclosure
HP BladeSystem c3000 Enclosure
HP BladeSystem c3000 EnclosureHP BladeSystem c3000 Enclosure
AF098A
AJ033A AJ034A AJ817A
AG115A
AG326B
AH169A
AH170A AG116A AG117A
AJ035A AJ037A AJ036A AJ038A
AJ818A AG320A AG321A
AH171A AH172A
AG322A
AG324B
AG323A
AG325B
AJ039A
AJ040A
AH218A AH219A
EH938A
EH939A
EH941A
DA - 12790 Worldwide — Version 12 — July 14, 2008
Page 25
QuickSpecs
Related Options
HP BladeSystem c3000 Enclosure
HP BladeSystem c3000 Enclosure
HP BladeSystem c3000 EnclosureHP BladeSystem c3000 Enclosure
Monitors and Keyboards
Monitors and Keyboards
Monitors and KeyboardsMonitors and Keyboards
HP StorageWorks D2D4009fc Backup System
NOTE:
NOTE:
9TB of Disk Storage
NOTE:NOTE:
HP StorageWorks D2D2503i Backup System
NOTE:
NOTE:
3TB of Disk Storage
NOTE:NOTE: NOTE:
NOTE:
Please see the HP D2D Backup Systems QuickSpecs for additional
NOTE:NOTE: information:
HP StorageWorks Virtual Library Systems
HP StorageWorks Virtual Library Systems
HP StorageWorks Virtual Library SystemsHP StorageWorks Virtual Library Systems HP StorageWorks 12000 Virtual Library System Gateway Base Library HP StorageWorks VLS12000 Data Dedupe Capacity LTU (2.0TB) HP StorageWorks 9030 Virtual Library System HP StorageWorks VLS9000 Data Dedupe Capacity LTU HP StorageWorks 6218 Virtual Library System HP StorageWorks 6227 Virtual Library System HP StorageWorks 6636 Virtual Library System HP StorageWorks 6653 Virtual Library System HP StorageWorks VLS6000 Data Dedupe Capacity LTU
NOTE:
NOTE:
NOTE: NOTE:
http://www.hp.com/go/automation
complete solution. Reference current compatibility information at:
http://www.hp.com/go/ebs
TFT7600 Rackmount Keyboard Monitor US TFT7600 Rackmount Keyboard Monitor UK TFT7600 Rackmount Keyboard Monitor FR TFT7600 Rackmount Keyboard Monitor SP TFT7600 Rackmount Keyboard Monitor DEN TFT7600 Rackmount Keyboard Monitor NOR TFT7600 Rackmount Keyboard Monitor SWI TFT7600 Rackmount Keyboard Monitor BEL TFT7600 Rackmount Keyboard Monitor RUS TFT7600 Rackmount Keyboard Monitor INTL 1U Rackmount Keyboard with USB, US 1U Rackmount Keyboard with USB, UK 1U Rackmount Keyboard with USB, GR 1U Rackmount Keyboard with USB, FR 1U Rackmount Keyboard with USB, ITL 1U Rackmount Keyboard with USB, SP 1U Rackmount Keyboard with USB, DEN 1U Rackmount Keyboard with USB, NOR 1U Rackmount Keyboard with USB, SE/FI 1U Rackmount Keyboard with USB, SWI 1U Rackmount Keyboard with USB, PORT 1U Rackmount Keyboard with USB, BEL 1U Rackmount Keyboard with USB, JPN2 1U Rackmount Keyboard with USB, RUS 1U Rackmount Keyboard with USB, INTL
http://www.hp.com/go/d2d
Please reference the Virtual Library Systems QuickSpecs at:
for additional information needed to create a
EH942A
EH945A
AH814A
T9709A
AG306A
T9708A AH809A AH810A AH811A AH812A
T9707A
AG052A AG053A AG055A AG057A AG058A AG059A AG061A AG063A AG065A AG066A AG072A AG073A AG074A AG075A AG076A AG077A AG078A AG079A AG080A AG081A AG082A AG083A AG084A AG085A AG086A
DA - 12790 Worldwide — Version 12 — July 14, 2008
Page 26
QuickSpecs
Related Options
NOTE:
NOTE:
NOTE: NOTE: URL:
http://www.hp.com/go/rackandpower
HP KVM Switch Options
HP KVM Switch Options
HP KVM Switch OptionsHP KVM Switch Options
2x1x16 IP Console Switch with Virtual Media 4x1x16 IP Console Switch with Virtual Media 2x16 Server Console Switch with Virtual Media BladeSystem c-Class KVM Interface Adapter - 1 pack HP 1x8 Server Console Switch HP 2x16 Server Console Switch
NOTE:
NOTE:
NOTE: NOTE: Cat52 cables can be found at the following URL:
HP 1x4 Console Switch HP USB Server Console Cable, 6 foot, 2-Pack
NOTE:
NOTE:
NOTE: NOTE:
HP USB KVM Cable with audio, 6'-2-pack
NOTE
NOTE
For additional information regarding KVM switches, Serial Console servers,
NOTENOTE rack mount monitors, keyboards and all related options please see the following URL:
http://www.hp.com/go/kvm
HP BladeSystem c3000 Enclosure
HP BladeSystem c3000 Enclosure
HP BladeSystem c3000 EnclosureHP BladeSystem c3000 Enclosure
For additional information regarding Rack Options, please see the following
Cat5e cables are required to connect Interface Adapters to Consoles Switches.
http://www.hp.com/go/kvm
required for supporting USB peripherals.
AF601A AF602A AF600A
AF605A 336044-B21 336045-B21
AF611A
AF613A
371729-B21
HP Serial Console Server
HP Serial Console Server
HP Serial Console ServerHP Serial Console Server Options
Options
OptionsOptions
Service and Support
Service and Support
Service and SupportService and Support Offerings
Offerings
OfferingsOfferings (HP Care Pack Services)
HP 16 Port Serial Console Server (worldwide) HP 48 Port Serial Console Server (worldwide) Serial Adapter, RJ45-DB9 DCE Female, 1 Pack Serial Adapter, RJ45-DB9 DCE Female, 8 Pack
NOTE:
NOTE:
NOTE: NOTE: Servers. Additional Serial Adapters and Cat5e cables can be found at the following URL: NOTE:
NOTE:
NOTE: NOTE: rack mount monitors, keyboards and all related options please see the following URL:
http://www.hp.com/go/kvm
NOTE:
NOTE:
NOTE: NOTE: supplies and fans. HP qualified rack options are covered by these services when installed within the same rack. HP supported c-Class enclosure devices including pass thru, Ethernet interconnect and virtual connect modules are also covered by the c3000 enclosure Care Pack services. NOTE:
NOTE:
NOTE:NOTE: the c3000 enclosure Care Packs, SAN/Fabric switches carry separate Care Packs. SAN/Fabric Switch Care Pack service level support should always be uplifted to match existing storage or server service level.
Hardware Services On-site Service
Hardware Services On-site Service
Hardware Services On-site ServiceHardware Services On-site Service Next Business Day On-site Service, 5-Day x 9-Hour Coverage, 3 Years, Electronic
NOTE:
NOTE:
NOTE:NOTE: enclosure.
4-Hour On-site Service, 5-Day x 13-Hour Coverage, 3 Years, Electronic 4-Hour On-site Service, 7-Day x 24-Hour Coverage, 3 Years, Electronic 6-Hour Call to Repair, On-site Service, 7-Day x 24-Hour Coverage, 3 Years,
Electronic
Cat5e cables are required to connect Serial Adapters to Serial Console
http://www.hp.com/go/kvm
For additional information regarding KVM switches, Serial Console servers,
HP Care Pack services for the c3000 Enclosure cover the enclosure, power
SAN/Fabric switches for the HP c-Class BladeSystem are not covered under
Uplifts the Ethernet devices to the same level of warranty as the c-class
.
.
AF101A
AF102A
AF103A
AF110A
UH309E
UH310E UH311E UH312E
DA - 12790 Worldwide — Version 12 — July 14, 2008
Page 27
QuickSpecs
Related Options
Support Plus 24
Support Plus 24
Support Plus 24Support Plus 24 Onsite HW support 24x7, 4-Hour response and Insight Control Environment for
BladeSystem Software Updates and Software Technical support offsite, onsite at HP's discretion, 24x7 2-Hour response time including. HP holidays, Electronic
Installation & Start-up Services
Installation & Start-up Services
Installation & Start-up ServicesInstallation & Start-up Services HP BladeSystem c3000 + ICE + OS Installation and Startup Service for Blade
Hardware and Insight Control Software, Electronic HP BladeSystem c3000 Installation & Startup for Blade Hardware and Operating
System HP BladeSystem c3000 Enhanced Network Installation and Startup Service, Electronic ProLiant BL c-Class Enclosure and Blade Hardware Installation, Electronic ProLiant BL c-Class Blade Server Hardware Installation, Electronic
NOTE:
NOTE:
NOTE: NOTE:
http://www.hp.com/services/bladesystemservices
NOTE:
NOTE:
NOTE: NOTE: 12 Port SAN Switch and Brocade 4/24 SAN Switch.
Hardware Services On-site Service
Hardware Services On-site Service
Hardware Services On-site ServiceHardware Services On-site Service Next Business Day On-site Service, 5-Day x 9-Hour Coverage,3 Years, Electronic 4-Hour On-site Service, 5-Day x 13-Hour Coverage, 3 Years, Electronic 4-Hour On-site Service, 7-Day x 24-Hour Coverage, 3 Years, (24 port) Electronic 6-Hour Call to Repair, On-site Service, 7-Day x 24-Hour Coverage, 3 Years,
Electronic Hardware Installation, Electronic
NOTE:
NOTE:
The HP Care Pack service part numbers below covers the Brocade 4/24 SAN
NOTE:NOTE: Switch Power Pack.
Hardware Services On-site Service
Hardware Services On-site Service
Hardware Services On-site ServiceHardware Services On-site Service Support Plus
Support Plus
Support PlusSupport Plus Onsite Hardware support, 8am-9pm, M-F, 4-hour response and Software Technical
support offsite, onsite at HP's discretion, 8am-9pm, M-F 2-hour response time excluding HP holidays, Electronic
Support Plus 24
Support Plus 24
Support Plus 24Support Plus 24 Onsite Hardware support, 8am-9pm, M-F, 4-Hour response and Software Technical
support offsite, onsite at HP's discretion, 8am-9pm, M-F 2-Hour response time excluding. HP holidays, Electronic
NOTE:
NOTE:
NOTE: NOTE: 9124e 12 port and 24 port Fabric Switch.
Hardware Services On-site Service
Hardware Services On-site Service
Hardware Services On-site ServiceHardware Services On-site Service Next Business Day On-site Service, 5-Day x 9-Hour Coverage, 3 Years, Electronic 4-Hour On-site Service, 5-Day x 13-Hour Coverage, 3 Years, Electronic 4-Hour On-site Service, 7-Day x 24-Hour Coverage, 3 Years, Electronic 6-Hour Call to Repair, On-site Service, 7-Day x 24-Hour Coverage, 3 Years,
Electronic Hardware Installation, Electronic Software Installation and StartUp Services
Software Installation and StartUp Services
Software Installation and StartUp ServicesSoftware Installation and StartUp Services Provides for the Installation and Start-up of ProLiant Essentials Rapid Deployment
Pack, Electronic
HP BladeSystem c3000 Enclosure
HP BladeSystem c3000 Enclosure
HP BladeSystem c3000 EnclosureHP BladeSystem c3000 Enclosure
For more information, customer/resellers can contact:
The HP Care Pack service part numbers below covers the HP Brocade 4Gb,
The HP Care Pack service part numbers below covers the HP Cisco MDS
UF540E
UF817E
UF818E
UF814E
UE494E
UE493E
UE436E
UE437E
UE438E
UE439E
U5988E
UE728E
UE729E
UF313E
UF972E
UF973E
UF974E
U5988E
U5683E
DA - 12790 Worldwide — Version 12 — July 14, 2008
Page 28
QuickSpecs
Related Options
NOTE:
NOTE:
NOTE: NOTE: Deployment Server. Includes the deployment of a single server. This new server will be deployed using either one of the pre-configured scripts or an image. In addition, the service will provide for the capture and storage of the configuration of the newly deployed server and orientation on product usage. To be delivered during standard office ours, standard office days.
Provides for the Installation and Start-up of Rapid Deployment Pack Implementation of Rapid Deployment Pack (Basic), Electronic
NOTE:
NOTE:
NOTE: NOTE: Management (VPM) software on a customer designated server, configuration of the VPM software to acquire security patches, enabling the VPM software to scan up to five (5) systems, applying the security patches to the designated servers, generating a report from VPM that shows the vulnerability assessment results, and providing customer with an orientation to the software.
Provides for the Installation and Start-up of System Insight Manager (Electronic) Provides for the Installation and Start-up of System Insight Manager Agents (Electronic) Provides for the Installation and Startup of Insight Control – Linux Edition Provides for the Installation and Startup of Virtual Machine Management & Server
Migration Pack Software Operating Environment Care Packs
Software Operating Environment Care Packs
Software Operating Environment Care PacksSoftware Operating Environment Care Packs 1 Year Microsoft operating environment software support 24x7 – 10 incidents 1 Year Red Hat operating System software support 24x7 – 10 incidents 1 Year SuSE operating System software support 24x7 – 10 incidents 1 Year 9x5 ProLiant Essentials Software Support 1 Year 24x7 ProLiant Essentials Software Support 3 Year 9x5 ProLiant Essentials Software Support HP 3 Year 24x7 ProLiant Essentials Software Support
NOTE:
NOTE:
NOTE: NOTE:
ttp://www.hp.com/hps/carepack/services/
NOTE:
NOTE:
NOTE: NOTE: supplies and fans. HP qualified rack options are covered by these services when installed within the same rack. HP supported c-Class enclosure devices including pass thru, Ethernet interconnect and virtual connect modules are also covered by the c7000 enclosure Care Pack services.
NOTE:
NOTE:
NOTE: NOTE: the c7000 enclosure Care Packs, SAN/Fabric switches carry separate Care Packs. SAN/Fabric Switch Care Pack service level support should always be uplifted to match existing storage or server service level.
Hardware Services On-site Service
Hardware Services On-site Service
Hardware Services On-site ServiceHardware Services On-site Service Next Business Day On-site Service, 5-Day x 9-Hour Coverage, 3 Years, Electronic
NOTE:
NOTE:
NOTE: NOTE:
4-Hour On-site Service, 5-Day x 13-Hour Coverage, 3 Years, Electronic 4-Hour On-site Service, 7-Day x 24-Hour Coverage, 3 Years, Electronic 6-Hour Call to Repair, On-site Service, 7-Day x 24-Hour Coverage, 3 Years,
Electronic Support Plus
Support Plus
Support PlusSupport Plus Onsite HW support, 8am-9pm, M-F, 4hr response and SW Tech support offsite, onsite
at HP's discretion, 8am-9pm, M-F 2hr response time excl. HP holidays, 3 Years
HP BladeSystem c3000 Enclosure
HP BladeSystem c3000 Enclosure
HP BladeSystem c3000 EnclosureHP BladeSystem c3000 Enclosure
Provides installation on a Customer supplied server designated as a
Service coverage: onsite installation of the Vulnerability and Patch
For more information, customer/resellers can contact:
HP Care Pack services for the c3000 Enclosure cover the enclosure, power
SAN/Fabric switches for the HP c-Class BladeSystem are not covered under
Uplifts the Ethernet devices to the same level of service as the c-class enclosure
UA042E
UA041E UA040E
UF369E
UD546E
U9269E U3408E U9936E
UF512E
UF513E
UF514E
UF515E
HA101A3#6X4
HA103A3#6X4 HA104A3#6X4 HA105A3#6X4
HA109A3#6X4
DA - 12790 Worldwide — Version 12 — July 14, 2008
Page 29
QuickSpecs
Related Options
HP BladeSystem c3000 Enclosure
HP BladeSystem c3000 Enclosure
HP BladeSystem c3000 EnclosureHP BladeSystem c3000 Enclosure
Support Plus 24 - Onsite HW support 24x7, 4hr response and SW support offsite, onsite at HP's discretion, 24x7 2hr response time incl. HP holidays, 3 Year
Proactive 24 Service - Mission Critical proactive environment 24x7 4hr onsite HW support, 3 Years
Critical Service - Mission Critical proactive environment 6-Hour Call-to-Repair onsite HW support, 3 Years
Installation & Start-up Services
Installation & Start-up Services
Installation & Start-up ServicesInstallation & Start-up Services HP BladeSystem c3000 Hard Ware Installation HP BladeSystem c3000 Infrastructure Installation and Startup Service for Blade
Hardware and Insight Control Software
NOTE:
NOTE:
NOTE: NOTE:
http://www.hp.com/services/bladesystemservices
NOTE:
NOTE:
NOTE: NOTE: 12 Port SAN Switch and Brocade 4/24 SAN Switch.
Hardware Services On-site Service
Hardware Services On-site Service
Hardware Services On-site ServiceHardware Services On-site Service Next Business Day On-site Service, 5-Day x 9-Hour Coverage, 3 Years 4-Hour On-site Service, 5-Day x 13-Hour Coverage, 3 Years 4-Hour On-site Service, 7-Day x 24-Hour Coverage, 3 Years 6-Hour Call to Repair, On-site Service, 7-Day x 24-Hour Coverage, 3 Years,
Electronic Hardware Installation, Electronic
NOTE:
NOTE:
NOTE: NOTE: Switch Power Pack.
Hardware Services On-site Service
Hardware Services On-site Service
Hardware Services On-site ServiceHardware Services On-site Service Support Plus
Support Plus
Support PlusSupport Plus Onsite HW support, 8am-9pm, M-F, 4hr response and SW Tech support offsite, onsite
at HP's discretion, 8am-9pm, M-F 2hr response time excluding HP holidays, Electronic Support Plus 24
Support Plus 24
Support Plus 24Support Plus 24 Onsite HW support 24x7, 4hr response and SW Tech support offsite, onsite at HP's
discretion, 24x7 2hr response time including HP holidays, Electronic
NOTE:
NOTE:
NOTE: NOTE: 9124e 12 port and 24 port Fabric Switch.
Hardware Services On-site Service
Hardware Services On-site Service
Hardware Services On-site ServiceHardware Services On-site Service Next Business Day On-site Service, 5-Day x 9-Hour Coverage, 3 Years 4-Hour On-site Service, 5-Day x 13-Hour Coverage, 3 Years 4-Hour On-site Service, 7-Day x 24-Hour Coverage, 3 Years 6-Hour Call to Repair, On-site Service, 7-Day x 24-Hour Coverage, 3 Years,
Electronic Hardware Installation, Electronic
NOTE:
NOTE:
NOTE: NOTE:
http://www.hp.com/hps/carepack/services/
For more information, customer/resellers can contact:
The HP Care Pack service part numbers below covers the HP Brocade 4Gb,
The HP Care Pack service part numbers below covers the Brocade 4/24 SAN
The HP Care Pack service part numbers below covers the HP Cisco MDS
For more information, customer/resellers can contact:
HA110A3#6X4
HA111A3#6X4
HA112A3#6X4
HA113A1#57A HA114A1#57A
HA101A3#85J HA103A3#85J HA104A3#85J HA105A3#85J
HA113A1#5D2
HA109A3#85K
HA110A3#85K
HA101A3#87L HA103A3#87L HA104A3#87L HA105A3#87L
HA113A1#5D2
DA - 12790 Worldwide — Version 12 — July 14, 2008
Page 30
QuickSpecs

Technical Specifications

Server Blade, Power Supply and Fan Population Guidelines
Server Blade, Power Supply and Fan Population Guidelines
Server Blade, Power Supply and Fan Population GuidelinesServer Blade, Power Supply and Fan Population Guidelines
Fan & power supply bay numbering
Fan & power supply bay numbering
Fan & power supply bay numberingFan & power supply bay numbering
HP BladeSystem c3000 Enclosure
HP BladeSystem c3000 Enclosure
HP BladeSystem c3000 EnclosureHP BladeSystem c3000 Enclosure
HP BladeSystem c3000 Enclosure – Rack
HP BladeSystem c3000 Enclosure – Rack
HP BladeSystem c3000 Enclosure – RackHP BladeSystem c3000 Enclosure – Rack Fan bay numbering
Fan bay numbering
Fan bay numberingFan bay numbering
HP BladeSystem c3000 Enclosure – Tower
HP BladeSystem c3000 Enclosure – Tower
HP BladeSystem c3000 Enclosure – TowerHP BladeSystem c3000 Enclosure – Tower
DA - 12790 Worldwide — Version 12 — July 14, 2008
Page 31
QuickSpecs
Technical Specifications
HP BladeSystem c3000 Enclosure – Rack
HP BladeSystem c3000 Enclosure – Rack
HP BladeSystem c3000 Enclosure – RackHP BladeSystem c3000 Enclosure – Rack Power supply bay numbering
Power supply bay numbering
Power supply bay numberingPower supply bay numbering
Power Supplies & Fans must be placed in the following bays
Power Supplies & Fans must be placed in the following bays
Power Supplies & Fans must be placed in the following baysPower Supplies & Fans must be placed in the following bays Number of Fans
Number of Fans
Number of FansNumber of Fans 4 6 Number of Power Supplies
Number of Power Supplies (for PS Redundant or non-redundant
Number of Power SuppliesNumber of Power Supplies mode)
2 3 4 5 6 Number of Power Supplies
Number of Power Supplies
Number of Power Supplies Number of Power Supplies 2 4 6
NOTE:
NOTE:
NOTE: NOTE: With six fans, all 8 server bays may be filled. NOTE:
NOTE:
NOTE: NOTE: that fans and blades are correctly placed before allowing systems to power on.
With four fans, the enclosure will support only 4 half-Height Server blades in the bottom half of the enclosure device bays.
For correct operation, fans and server blades must be installed in the correct bays. The Onboard Administrator will ensure
(For AC Redundant mode)
HP BladeSystem c3000 Enclosure – Tower
HP BladeSystem c3000 Enclosure – Tower
HP BladeSystem c3000 Enclosure – TowerHP BladeSystem c3000 Enclosure – Tower
Fan Bays Used
Fan Bays Used
Fan Bays UsedFan Bays Used 2,4,5, 6 all bays filled Power Supply Bays Used
Power Supply Bays Used
Power Supply Bays UsedPower Supply Bays Used
1 & 2 1, 2, & 3 1, 2, 3, 4 1 through 5 All bays Place Power Supplies in bays:
Place Power Supplies in bays:
Place Power Supplies in bays:Place Power Supplies in bays: 1 & 4 1, 2, 4, & 5 all bays filled
HP BladeSystem c3000 Enclosure
HP BladeSystem c3000 Enclosure
HP BladeSystem c3000 EnclosureHP BladeSystem c3000 Enclosure
Half-height server blade bay numbering
Half-height server blade bay numbering
Half-height server blade bay numberingHalf-height server blade bay numbering
DA - 12790 Worldwide — Version 12 — July 14, 2008
Page 32
QuickSpecs
Technical Specifications
HP BladeSystem c3000 Enclosure – Racks
HP BladeSystem c3000 Enclosure – Racks
HP BladeSystem c3000 Enclosure – RacksHP BladeSystem c3000 Enclosure – Racks
1.
Device Bay 1
2.
Device Bay 2
3.
Device Bay 3
4.
Device Bay 4
5.
Device Bay 5
6.
Device Bay 6
7.
Device Bay 7
8.
Device Bay 8
NOTE:
NOTE:
Half-height server blades should be populated from the bottom half of the enclosure, in the following order (bays 1, 5, 2, 6,
NOTE:NOTE: 3, 7, 4, & 8)
HP BladeSystem c3000 Enclosure – Tower
HP BladeSystem c3000 Enclosure – Tower
HP BladeSystem c3000 Enclosure – TowerHP BladeSystem c3000 Enclosure – Tower
1.
Device Bay 1
2.
Device Bay 2
3.
Device Bay 3
4.
Device Bay 4
5.
Device Bay 5
6.
Device Bay 6
7.
Device Bay 7
8.
Device Bay 8
Full-height server blade bay numbering
Full-height server blade bay numbering
Full-height server blade bay numberingFull-height server blade bay numbering
HP BladeSystem c3000 Enclosure
HP BladeSystem c3000 Enclosure
HP BladeSystem c3000 EnclosureHP BladeSystem c3000 Enclosure
HP BladeSystem c3000 Enclosure – Racks
HP BladeSystem c3000 Enclosure – Racks
HP BladeSystem c3000 Enclosure – RacksHP BladeSystem c3000 Enclosure – Racks
1.
Device Bay 1
2.
Device Bay 2
3.
Device Bay 3
4.
Device Bay 4
NOTE:
NOTE:
NOTE: NOTE: can be used; with six fans, all bays can be used.
Full-height servers should be populated from the bottom to the top (bays 1 thru 4). With four fans, only the bottom 2 bays
DA - 12790 Worldwide — Version 12 — July 14, 2008
HP BladeSystem c3000 Enclosure – Tower
HP BladeSystem c3000 Enclosure – Tower
HP BladeSystem c3000 Enclosure – TowerHP BladeSystem c3000 Enclosure – Tower
1.
Device Bay 1
2.
Device Bay 2
3.
Device Bay 3
4.
Device Bay 4
Page 33
QuickSpecs
HP BladeSystem c3000 Enclosure
HP BladeSystem c3000 Enclosure
HP BladeSystem c3000 EnclosureHP BladeSystem c3000 Enclosure
Technical Specifications
Mixed Configuration – Full Height and Half Height Population
Mixed Configuration – Full Height and Half Height Population
Mixed Configuration – Full Height and Half Height PopulationMixed Configuration – Full Height and Half Height Population The c3000 enclosure is divided into 2 zones or quadrants by the horizontal (vertical on Tower model) support metalwork. Zone 1
includes bays 1, 2, 4, & 5; and Zone 2 contains bays 3, 4, 7, & 8. Within each zone a removable divider is used to support half height devices. To install a full-height blade in any zone this divider must be removed. An optional mini-divider support bracket is included with every c3000 enclosure. As a consequence of using the mini-divider in the Zone 2, this zone can only contain one full height blade and 2 half-height blades. Zone 1 can contain either 4 half-height blades, or by removing the divider, it can contain 2 full-height blades.
NOTE:
NOTE:
NOTE: NOTE: Guide" for more information on using bay dividers and the mini-divider for mixed configurations.
NOTE:
NOTE:
NOTE: NOTE: each SB40c that allows a half-height blade to be mounted to the left side of a storage or tape blade.
NOTE:
NOTE:
NOTE:NOTE:
NOTE:
NOTE:
NOTE: NOTE: users guide at:
Enclosure Unit –
Enclosure Unit –
Enclosure Unit –Enclosure Unit – Rack Model
Rack Model
Rack ModelRack Model
Please read the RTF card (included with each c3000 enclosure) and the "HP BladeSystem c3000 Setup and Installation
Storage or tape blades can be installed in the same zone as both full-height and half-height blades, a bracket ships with
In this case, the SB40c or tape blade cannot be removed without first removing the half height blade and mounting bracket.
For Mixed configurations of full height and half height population rules; please see the c3000 Enclosure installation and
http://h71028.www7.hp.com/enterprise/cache/316682-0-0-0-121.html
Dimensions
Dimensions
Dimensions Dimensions (with bezel)
Weight
Weight
WeightWeight (approximate)
Input Requirements
Input Requirements
Input RequirementsInput Requirements (per AC power supply)
BTU Rating
BTU Rating
BTU RatingBTU Rating
Power Specifications
Power Specifications
Power SpecificationsPower Specifications
Power Supply Output
Power Supply Output
Power Supply OutputPower Supply Output (per power supply)
(H x W x D)
10.4 x 19.1 x 32.977 in (265 x 485 x 835 mm)
Maximum (one enclosure with 8 blades and 4 interconnects installed)
Minimum (one enclosure without blades and interconnects)
Rated Line Voltage
Rated Input Current
Rated Input Frequency Maximum per power
supply
To review typical system power ratings use the Power Calculator which is available via the online tool located at URL:
www.hp.com/go/bladesystem/powercalculator
Rated Steady-State Power
Maximum Peak Power
300 lb (136 kg)
130 lb (59 kg)
90
––––
132 VAC
180
––––
264 VAC
9.3 A (at 100 VAC)
9.7 A (at 120VAC)
7.8 A (at 200 VAC)
7.2 A (at 208 VAC)
6.8 A (at 220 VAC)
6.2 A (at 240 VAC) 47 to 63 Hz 2728 BTU/hr (at 100 VAC)
3069 BTU/hr (at 120VAC) 4092 BTU/hr (at 200 to 240 VAC)
800 W (at 100 VAC) 900 W (at 120 VAC) 1200 W (at 200 to 240 VAC)
880 W (at 100 VAC) 990 W (at 120 VAC) 1350 W (at 200 to 240 VAC)
DA - 12790 Worldwide — Version 12 — July 14, 2008
Page 34
QuickSpecs
Technical Specifications
System Inlet Temperature
System Inlet Temperature
System Inlet TemperatureSystem Inlet Temperature
Relative Humidity
Relative Humidity
Relative HumidityRelative Humidity (non-condensing)
Altitude
Altitude
AltitudeAltitude
Acoustic Noise
Acoustic Noise
Acoustic NoiseAcoustic Noise
HP BladeSystem c3000 Enclosure
HP BladeSystem c3000 Enclosure
HP BladeSystem c3000 EnclosureHP BladeSystem c3000 Enclosure
Operating
Non-operating
Operating
Non-operating
Operating
Non-operating
Listed are the declared A-Weighted sound power levels (LWAd) and declared average bystander position A-Weighted sound pressure levels (LpAm) when the product is operating in a 23°C ambient environment. Noise emissions were measured in accordance with ISO 7779 (ECMA 74) and declared in accordance with ISO 9296 (ECMA 109).
Idle
Operating
10° to 35°C (50° to 95°F) at sea level with an altitude derating of 1.0°C per every 305 m (1.8°F per every 1000 ft) above sea level to a maximum of 3050 m (10,000 ft), no direct sustained sunlight. Maximum rate of change is 10°C/hr (18°F/hr). The upper limit may be limited by the type and number of options installed. System performance may be reduced if operating with a fan fault or above 30°C (86°F).
-30° to 60°C (-22° to 140°F). Maximum rate of change is 20°C/hr (36°F/hr).
10 to 90% relative humidity (Rh), 28°C (82.4°F) maximum wet bulb temperature, non­condensing.
5 to 95% relative humidity (Rh), 38.7°C (101.7°F) maximum wet bulb temperature, non­condensing.
3050 m (10,000 ft). This value may be limited by the type and number of options installed. Maximum allowable altitude change rate is 457 m/min (1500 ft/min).
9144 m (30,000 ft). Maximum allowable altitude change rate is 457 m/min (1500 ft/min).
depends on server configuration & mix of server blades
varies by CPU utilization, server configuration, and mix of server blades
Enclosure Unit – Tower
Enclosure Unit – Tower
Enclosure Unit – TowerEnclosure Unit – Tower Model
Model
ModelModel
Dimensions
Dimensions
Dimensions Dimensions (with bezel)
Weight
Weight
WeightWeight (approximate)
Input Requirements
Input Requirements
Input RequirementsInput Requirements (per AC power supply)
(H x W x D)
DA - 12790 Worldwide — Version 12 — July 14, 2008
21.29 x 13.48 x 34.43 in (54.08 x 34.24 x 87.45 cm)
Maximum (all server blades and interconnects installed)
Minimum (2 power supplies & 4 fans, no server blades nor interconnects installed)
Rated Line Voltage
342 lb (155 kg)
192 lb (87.09 kg)
90
––––
132 VAC
180 - 264 VAC
Page 35
QuickSpecs
Technical Specifications
HP BladeSystem c3000 Enclosure
HP BladeSystem c3000 Enclosure
HP BladeSystem c3000 EnclosureHP BladeSystem c3000 Enclosure
BTU Rating
BTU Rating
BTU RatingBTU Rating
Power Specifications
Power Specifications
Power SpecificationsPower Specifications
Power Supply Output
Power Supply Output
Power Supply OutputPower Supply Output (per power supply)
System Inlet Temperature
System Inlet Temperature
System Inlet TemperatureSystem Inlet Temperature
Relative Humidity
Relative Humidity
Relative HumidityRelative Humidity (non-condensing)
Altitude
Altitude
AltitudeAltitude
Acoustic Noise
Acoustic Noise
Acoustic NoiseAcoustic Noise
Rated Input Current
Rated Input Frequency Maximum per power
supply
To review typical system power ratings use the Power Calculator which is available via the online tool located at URL: :
www.hp.com/go/bladesystem/powercalculator
Rated Steady-State Power
Maximum Peak Power
Operating
Non-operating
Operating
Non-operating
Operating
Non-operating
Listed are the declared A-Weighted sound power levels (LWAd) and declared average bystander position A-Weighted sound pressure levels (LpAm) when the product is operating in a 23°C ambient environment. Noise emissions were measured in accordance with ISO 7779 (ECMA 74) and declared in accordance with ISO 9296 (ECMA 109).
Idle
9.3 A (at 100 VAC)
9.7 A (at 110 VAC)
7.8 A (at 200 VAC)
7.2 A (at 208 VAC)
6.8 A (at 220 VAC)
6.2 A (at 240 VAC) 47 to 63 Hz 2728 BTU/hr (at 100 VAC)
3069 BTU/hr (at 120VAC) 4092 BTU/hr (at 200 to 240 VAC)
800 W (at 100 VAC), 900 W (at 120 VAC) 1200 W (at 200 to 240 VAC)
880 W (at 100 VAC), 990 W (at 120 VAC) 1350 W (at 200 to 240 VAC)
10° to 35°C (50° to 95°F) at sea level with an altitude derating of 1.0°C per every 305 m (1.8°F per every 1000 ft) above sea level to a maximum of 3050 m (10,000 ft), no direct sustained sunlight. Maximum rate of change is 10°C/hr (18°F/hr). The upper limit may be limited by the type and number of options installed. System performance may be reduced if operating with a fan fault or above 30°C (86°F).
-30° to 60°C (-22° to 140°F). Maximum rate of change is 20°C/hr (36°F/hr).
10 to 90% relative humidity (Rh), 28°C (82.4°F) maximum wet bulb temperature, non­condensing.
5 to 95% relative humidity (Rh), 38.7°C (101.7°F) maximum wet bulb temperature, non­condensing.
3050 m (10,000 ft). This value may be limited by the type and number of options installed. Maximum allowable altitude change rate is 457 m/min (1500 ft/min).
9144 m (30,000 ft). Maximum allowable altitude change rate is 457 m/min (1500 ft/min).
depends on server configuration & mix of server blades
DA - 12790 Worldwide — Version 12 — July 14, 2008
Page 36
QuickSpecs
Technical Specifications
HP BladeSystem c3000 Enclosure
HP BladeSystem c3000 Enclosure
HP BladeSystem c3000 EnclosureHP BladeSystem c3000 Enclosure
Option Kits
Option Kits
Option KitsOption Kits
NOTE:
NOTE:
NOTE: NOTE: available via the online tool located at URL:
Environment-friendly
Environment-friendly
Environment-friendlyEnvironment-friendly Products and Approach
Products and Approach
Products and ApproachProducts and Approach
To review maximum system power ratings for facilities planning purposes use the Active Answers Power Calculator which is
Power Supply Dimensions
Power Supply Dimensions
Power Supply DimensionsPower Supply Dimensions
Fan Option Shipping
Fan Option Shipping
Fan Option ShippingFan Option Shipping Dimensions
Dimensions
DimensionsDimensions
End-of-life Management
End-of-life Management
End-of-life ManagementEnd-of-life Management and Recycling
and Recycling
and Recyclingand Recycling
Operating
Size
Weight Size
Weight
http://www.hp.com/go/bladesystem/powercalculator
Hewlett-Packard offers end-of-life HP product return, trade-in, and recycling programs in many geographic areas. For trade-in information, please go to
http://www.hp.com/go/green http://www.hp.com/go/green
Products returned to HP will be recycled, recovered or disposed of in a responsible manner.
varies by CPU utilization, server configuration, and mix of server blades
Height: 1.515 in (38.48 mm) Width: 3.4 in (86.36 mm) Depth: 7.5 in (190.5 mm)
2.5 lbs (1.13 kg) Height: 8.75 in (223 mm) Width: 9.75 in (248 mm) Depth: 15.88 in (403 mm)
4.0 lbs (1.8 Kg)
. To recycle your product, please go to: or contact your nearest HP sales office.
The EU WEEE directive (2002/95/EC) requires manufacturers to provide treatment information for each product type for use by treatment facilities. This information (product disassembly instructions) is posted on the Hewlett Packard web site at: used by recyclers and other WEEE treatment facilities as well as HP OEM customers who integrate and re-sell HP equipment.
© Copyright 2008 Hewlett-Packard Development Company, L.P.
The information contained herein is subject to change without notice.
Microsoft and Windows NT are US registered trademarks of Microsoft Corporation. Intel, the Intel logo, Xeon and Xeon Inside are trademarks of Intel Corporation in the U.S. and other countries. AMD is a US registered trademark of AMD Corporation.
The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.
http://www.hp.com/go/green
. These instructions may be
DA - 12790 Worldwide — Version 12 — July 14, 2008
Page 37
Loading...