HP LaserJet 8100 Series and 8100 MFP Printers -
Memory
Page
1
of
7
06/08/2009
Product Specifications
Model numbers
Serial number location
Printer description
Printer specifications
Software information
Physical specifications
Electrical specifications
Environmental specifications
Warranty information
Safety certifications
Model numbers
Printer
HP
LaserJet
8100
HP
LaserJet
8100n
HP
LaserJet
8100dn
HP
LaserJet
8100 MFP
Model
#
C4214A The HP LaserJet 8100 printer comes standard with 16 MB RAM, wide format
printing, two 500-sheet trays, and a 100-sheet multipurpose tray.
C4215A The HP LaserJet 8100n printer comes standard with 16 MB RAM, wide
format printing, two 500-sheet trays, a 100-sheet multipurpose tray, and an
HP Jetdirect 600N print server.
C4216A The HP LaserJet 8100dn printer comes standard with 24 MB RAM, wide
format printing, two 500-sheet trays, a 100-sheet multipurpose tray, an HP
Jetdirect 600n print server, and a duplexer (for printing on both sides of
paper).
C8065A The HP LaserJet 8100 MFP printer comes standard with 56 MB RAM, wide
format printing, two 500-sheet trays, a 100-sheet multipurpose tray, an HP
Jetdirect 600n print server, a 3,000 Sheet Stapler/Stacker (C4788A), a 2,000
Sheet High Capacity Input Tray (C4781A), an HP Digital Copy Module Stand
(C4231A), and a duplexer (for printing on both sides of paper).
Description
Serial number location
The serial number is located on the back of the HP LaserJet 8100 series printer.
Printer description
The HP LaserJet 8100 series printers combine the latest technologies with exceptional performance
to give you hassle-free network printing for medium to large departments.
HP LaserJet 8100 series printers have new features that can provide outstanding output with a
variety of media- and paper-handling options, help improve performance while minimizing network
traffic, and reduce your overall cost of ownership.
Printer specifications
Speed and throughput
RIP ONCE technology
32 pages-per-minute (ppm)
166 MHz MIPS microprocessor
Resolution
600 dots-per-inch (dpi) with Resolution Enhancement technology (REt)
FastRes 1200 provides 1200 dpi quality at full speed
More than 220 levels of gray
of SDRAM on the formatter
tray that automatically
NOTE:
will not reach its full capabilities
when mixed with EDO memory.
NOTE:
must
printer will not function.
Page
2
of
7
06/08/2009
16 MB (HP LaserJet 8100 and 8100n printers), 24 MB (HP LaserJet 8100dn printer),
or 56 MB (HP LaserJet 8100 MFP) of SDRAM*, expandable using industry standard
100-pin DIMMs (Dual In-Line Memory Modules) to a maximum of 192 MB.
EDO memory may be used with the SDRAM memory, but the SDRAM
There is a Firmware DIMM that
Memory Enhancement technology (MEt) automatically compresses data to use RAM
be installed only in Slot 1 or the
more efficiently.
The HP LaserJet 8100 and 8100n printers come with 8 MB
and an 8 MB SDRAM DIMM for a total of 16 MB.
The HP LaserJet 8100dn printer comes with 8 MB of SDRAM on the formatter and a
16 MB SDRAM DIMM for a total of 24 MB.
The HP LaserJet 8100 MFP comes with 8 MB of SDRAM on the formatter and a 48
MB SDRAM DIMM for a total of 56 MB.
Language and fonts
HP PCL 6
HP PCL 5e for compatibility
Printer Job Language (PJL)
Printer Management Language (PML)
45 scalable TrueType typefaces
65 fonts with HP FontSmart (not available for Macintosh)
PostScript (R) Level 2 Emulation standard
Paper handling options
Input
Tray 1: A multipurpose tray for paper, transparencies, labels, and envelopes
that holds up to 100 sheets of paper
Trays 2 and 3: Two 500-sheet trays that automatically sense paper size
Optional 2 x 500-sheet Input Tray (Trays 4 and 5): Two 500-sheet trays that
automatically sense paper size
Optional 2000-sheet Input Tray (Tray 4): One 2000-sheet
senses paper size
Optional Duplex Printing Accessory: Provides two-sided printing (both sides of
paper)
Optional Envelope Feeder: Automatically feeds up to 100 envelopes
Custom Paper Tray: Allows printing on custom-sized paper. Holds up to 500
sheets of paper.
Output
Standard Output Bin: Holds up to 500 sheets of paper. Automatically senses
when full.
Face-up Bin: Holds up to 125 sheets of paper. Provides the best results when
printing transparencies, labels, and envelopes.
Optional 5-bin Mailbox with Stapler: Each of the 5 bins holds up to 250 sheets
of paper. Provides job separation by stapling jobs.
Optional 8-bin Mailbox: Each of the 8 bins holds up to 250 sheets of paper.
Optional 7-bin Tabletop Mailbox: Each of the 7 bins holds up to 120 sheets of
paper. Designed for tabletop printing. An optional stand is also available to use
with this mailbox.
Optional 3000-sheet stacker and 3000-sheet stapler/stacker for high volume
printing. This offers job offset stacking.
software. If you do
PCL
5e
Page
3
of
7
06/08/2009
Connectivity
3 EIO (enhanced input/output) slots
Optional HP Jetdirect EIO cards, Ethernet (10Base-T, 10Base2), Local Talk, Token
Ring, Fast Ethernet 10/100Base-TX (bundled with HP LaserJet 8100 DN printer)
Parallel
HP Fast InfraRed Connect (fast infrared connection)
Environmental features
EconoMode reduces toner consumption
Power Save setting saves energy (meets Energy Star guidelines)
High content of recyclable components and materials in the printer
Software information
Client
Software
Windows Macintosh Windows Macintosh
Drivers
HP Toolbox
HP FontSmart
[1]
HP DocWise
HP Jetsend
[1] These products are not supported in Traditional Chinese, Simplified Chinese, Korean, and
Japanese.
The printer drivers are provided on one compact disc and must be installed to take full advantage of
the printer’s features. The other software programs are recommended, but are not required for
operation. See the readme file for more information.
The most recent drivers, additional drivers, and other software are available from the Internet.
Depending on the configuration of Windows-driven computers, the installation program for the printer
software automatically checks the computer for Internet access to obtain the latest
not have access to the Internet, see the "HP Customer Care" section at the front of the online user's
guide to obtain the most recent software.
Included with the printer is a compact disc, containing the HP LaserJet Printing System. The Printing
System includes software designed for end users operating in the following environments:
Apple LaserWriter 8
Driver
PPDs
HP LaserJet Utility [1]
Network Administrator
Software
HP Jetadmin
Drivers
HP FontSmart [1]
HP LaserJet Resource
Manager
Apple LaserWriter 8
Driver
PPDs
HP LaserJet Utility [1]
Fonts [1]
Desktop Printer Utility
[1]
Guide files [1]
Microsoft (R) Windows 3.1x
Microsoft Windows 95/98
Microsoft Windows NT 4.0
IBM OS/2 version 2.0 or greater
Apple Mac OS 7 or greater
Included with the printer
Printer drivers access the printer features and allow the computer to communicate with the
printer (using a printer language).
PCL 6
Custom to only install the software you
Page
4
of
7
06/08/2009
PostScript drivers
HP Jetadmin Utility - Printer management software provides easy printer setup, use,
and management
HP FontSmart Utility - A font management program for the Windows environment
HP ToolBox Utility
HP DocWise Utility
HP Resource Manager - Software tool for downloading fonts, forms, and macros to an
optional hard disk. (Recommended for installation on the network administrator's
computer only. Requires bidirectional communication).
HP De-Installer Utility
HP Disk Image Maker Utility
Internet Installer
HP Web Jetadmin software is available from HP's Web site:
www.hp.com/go/webJetadmin
Windows environments
Within the computer installation program, select Typical Install to install the PCl 5e,
PCL6, and PS drivers and HP FontSmart. Select Custom Install to install only the
software you prefer, or if you are a network administrator. Select Minimum Install to
install only the PCL 6 driver for basic printing.
Macintosh environments
The PostScript driver is the only driver available on a Macintosh system.
Click Install to install the HP LaserWriter 8 driver, PPDs, PDFs, online help, HP
LaserJet utility, and Desktop Printer utility. Click
prefer.
DOS drivers
Drivers for DOS WordPerfect 5.x and 6.x and AutoCAD are available on the CD-ROM.
Physical specifications
Category Specification
Dimensions
(H x W x D)
Weight
(without print
cartridge)
Print Speed Simplex
Paper Input Bin
Capacity
8100, 8100n, and 8100dn: 21.30 x 22.3 x 20.5 inches
(541 x 566.42 x 520 mm)
8100 MFP: 43 x 25 x 64 in
8100 and 8100n: 112 lbs (51 kg)
8100dn: 120 lbs (54 kg)
8100 MFP: 348 lbs
32 ppm (letter, A4)
17 ppm (ledger)
18 ppm (A3)
20 ppm (legal)
Duplex
12 ppm (letter, A4)
8.4 ppm (ledger, A3)
9 ppm (legal or B4)
Tray 1 = 100
sheets Tray 2 = 500
sheets Tray 3 = 500 sheets
Page
5
of
7
06/08/2009
Optional 500-sheet Tray (Trays 2 and 3)
Optional 2000-sheet Tray (Tray 4)
Optional Envelope Feeder = up to 100 envelopes
Paper Output
Bin Capacity
Minimum Paper
Size
Maximum Paper
Size
Supported
Paper Weights
Base Memory 16 MB (HP LaserJet 8100 and 8100n printer) SDRAM, 24 MB (HP LaserJet
Memory
Expansion
Print Resolution 600 dots-per-inch (dpi) with Resolution Enhancement technology (REt)
Duty Cycle Up to 150,000 pages-per-month
Standard Output Bin (face down) = 500 sheets
Face Up Bin = 100 sheets
5-bin Mailbox with Stapler and 8-bin Mailbox = up to 250 sheets per bin
7-bin Tabletop Mailbox up to 120 sheets per bin
3.9 x 7.5 inches (98 x 191 mm)
11.7 x 17.7 inches (297 x 450 mm)
Tray 1: 16 to 53-lb (60 to 199 g/m2) Bond; 33 lb to 110 lb. Index (through left
output bin only)
Trays 2, 3, 4, or 5: 16 to 28-lb (60 to 105 g/m2)
Two-sided: 16 to 28-lb bond (60 to 105 g/m2)
8100dn printer) or 56 MB (HP LaserJet 8100 MFP) of SDRAM, expandable using
industry standard 100-pin DIMMs (Dual In-Line Memory Modules)
There is a Firmware DIMM that must be installed only in Slot 1 or the printer will
not function.
Memory Enhancement technology (MEt) automatically compresses data to use
RAM more efficiently
The printer has three dual in-line memory module DIMM) slots for upgrading.
There is a Firmware DIMM that must be installed only in Slot 1 or the printer will
not function.
More printer memory. DIMMs are available in 4, 8, 16, 32, and 64 MB, for a
maximum of 192 MB.
Flash memory DIMMs, available in 2 and 4 MB. Unlike standard printer memory,
flash DIMMs can be used to permanently store downloaded items in the printer,
even when the printer is off.
DIMM-based accessory fonts, macros, and patterns.
FastRes 1200 provides 1200 dpi quality at full speed
More than 220 levels of gray
Electrical specifications
Printer State
Printing
(100-127V units)
(220-240V units)
Standby
(100-127V units)
(220-240V units)
PowerSave 1
(default activation time 60 minutes)
Power Consumption
(average, base unit)
700 Watts
710 Watts
145 Watts
145 Watts
30 Watts
32 Watts
Power Consumption
(average, fully configured
unit)
710 Watts
720 Watts
155 Watts
155 Watts
38 Watts
(100-127V units)
Page
6
of
7
06/08/2009
40 Watts
(220-240V units)
PowerSave 2
(default activation time 10 minutes after
Power Save 1 starts, if nothing else
happens)
Off 0 Watts 0.25 Watts
Minimum Recommended Circuit Capacity
100-127 Volt 15.0 amps
220-240 Volt 6.5 amps
Power Requirements (Acceptable Line Voltage)
100-127 volts (+/- 10 percent) 50/60 Hz (+/- 2 Hz)
220-240 volts (+/- 10 percent) 50 Hz (+/- 2 Hz)
220 Volt (+/- 10 percent) 60 Hz (+/- 2 Hz)
20 Watts
22 Watts
22 Watts
(100-127V units)
24 Watts
(220-240V units)
(100-127V units)
0.25 Watts
(220-240V units)
Acoustic Emissions (Per ISO 9296)
Sound Power Level 6.9 Bel 5.2 Bel Inaudible
Sound Pressure Level, L pAm
(Bystander Position)
Sound Pressure Level, L pAm
(Operator Position)
[1] Print speed is 32 ppm.
Operating
(Printing) [1]
53 dB 36 dB Inaudible
59 dB 41 dB Inaudible
Power Save 1 /
Standby
Power Save
Environmental specifications
Operating Temperature 50 to 91 degrees Fahrenheit
Relative Humidity 20 to 80%
(10 to 32.5 degrees Celsius)
Warranty information
One-year on-site limited warranty.
Safety certifications
Safety IEC 950:1991+A1+A2+A3+A4 / EN 60950:1992+A1+A2+A3+A4
EMC CISPR 22:1993 / EN 55022:1994 Class B [1]
IEC 825-1:1993 / EN 60825-1:1994 Class 1 (Laser/LED)
CISPR 22:1993 / EN 55022:1994 Class A [3]
EN 50081-1:1992
EN 50082-1:1992
IEC 801-2:1991 / prEN 55024-2:1992 - 3 kV CD, 8 kV AD
IEC 801-3:1984 / prEN 55024-3:1991 - 3 V/m
IEC 801-4:1988 / prEN 55024-4:1992 - 1.0 kV Power Lines, 0.5 kV Signal Lines
2
Voltage
either of the IEEE 802.3
connectors, the printer meets the requirements of EN 55022 Class A.
Page
7
of
7
06/08/2009
FCC Title 47 CFR, Part 15 Class B [2] / ICES-002, Issue 2
AS / NZS 3548:1995
Supplementary Information:
The product herewith complies with the requirements of the EMC Directive 89/336/EEC and the Low
Directive 73/23/EEC, and carries the CE-marking accordingly.
[1] The product was tested in a typical configuration with Hewlett-Packard Personal Computer
Systems.
[2] This Device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
[3] The product includes Local Area Network (LAN) options. When the Interface Cable is attached to
Loading...