HP 370 User Manual

1 Unpack the printer

Remove the tape from inside and around the printer. The printer box contains the following items:

1. HP Photosmart 370 series printer

2. Setup Guide (this poster)

3. User’s Guide

4. HP Photosmart software on CD

5. Tri-color print cartridge

6. Sample media pack and resealable media bag

7. Power supply (power supplies may vary in appearance or have an additional power cord)

Note: Some contents may vary by country/region.

2 Plug in the power cord

1. Connect the power cord to the back of the printer.

2. Plug the power cord into a working electrical outlet.

3 Turn on the printer

1. Press On to turn on the printer.

2. When Select language appears on the printer

screen, press  or  to highlight your language.

3. Press OK to select your language and continue.

4. When Set LCD language to (your language)

appears on the printer screen, press  or  to highlight Yes.

5. Press OK to select Yes and continue.

6. When Select country/region appears on the

printer screen, press  or  to highlight your country/region.

7. P r e s s OK to select your country/region.

4 Remove the tape on the

print cartridge

1. Open the print cartridge package.

2. Pull the pink pull-tab to remove the clear tape from

the print cartridge.

Do not touch or remove the ink nozzles or the copper-colored contacts!

Setup Guide HP Photosmart 370 series

Printer screen

Arrow buttons

OK button

On button

*Q3419-90167* Q3419-90167

5 Install the print cartridge

1. Open the Out tray, then open the print cartridge access door.

2. Insert the Tri-color print cartridge into the print cartridge cradle with the label on top, the coppercolored contacts facing toward the inside of the printer, and the ink nozzles facing down.

3. Push the print cartridge into the cradle until it snaps into place.

4. Close the print cartridge access door.

6 Print an alignment page

1. Open the In tray as far as it will go.

2. Load an index card from the sample pack.

3. Adjust the paper-width guide to fit close to the edges of the index card without bending the card.

4. Press OK. An alignment page prints on the index card. Printing an alignment page ensures high print quality.

5. Discard the page.

7 Print your first photo

1. Place a few sheets of photo paper in the In tray with the glossy side facing toward you. If you are using tabbed paper, insert it so the tabbed end feeds in last.

2. Adjust the paper-width guide to fit close to the edges of the paper without bending the paper.

3. Insert a memory card into the correct Memory Card slot.

Note: The memory card will not insert all the way into the printer. When the memory card is inserted correctly, the Memory Card light flashes and then remains solid green.

4. Press or  to view the photos.

5. Press OK to select a photo, then press Print to print

your first photo.

Need more information?

For more information, see the following:

HP Photosmart 370 series User’s Guide

Onscreen HP Photosmart Printer Help

www.hp.com/support

Print cartridge access door

Print cartridge cradle

Paper-width guide

In tray

Memory Card light

Memory Card slots

Print button

Arrow buttons