Page 1
Retired
QuickSpecs
HP 1905 Switch Series
Overview
Models
HP 1905-24 Switch
HP 1905-48 Switch
HP 1905-24-PoE Switch
JD990A
JD994A
JD992A
Key features
Customized operation using intuitive Web interface
Fast Ethernet Layer 2 operation
Access control lists for enhanced security
Spanning Tree: STP and RSTP
3-year warranty
Product overview
HP 1905 Switch Series devices are smart managed fixed-configuration Fast Ethernet Layer 2 switches designed for small businesses
looking for key features in an easy-to-administer, low-cost solution. Fast Ethernet models include: 24- and 48-port non-PoE switches,
8- and 24-port PoE Fast Ethernet switches. Also available is a 10-port PoE Gigabit Ethernet switch. These smart managed switches
come preconfigured for fast and easy installation, yet allow network operation to be enhanced using an intuitive Web-based
management interface. Advanced security and quality of service features create a voice-ready network. HP 1905 series switches are
solidly built for business operation, and are designed for high reliability, long life, low power consumption, and low total cost of
ownership. The HP 1905 switches come with a 3-year warranty, covering unit, fans, and power adapters or power supplies.
Features and benefits
Quality of Service (QoS)
Traffic prioritization
Management
Simple Web management
Secure Web GUI
SNMPv1, v2c
Port mirroring
attacks
IEEE 802.1AB Link Layer Discovery Protocol
management applications
Connectivity
Auto-MDIX
Front-panel LEDs
Flow control
Small Form-Factor Pluggable
Cable diagnostics
: devices can be discovered and monitored from an SNMP management station
: automatically adjusts for straight-through or crossover cables on all ports
: helps ensure reliable communications during full-duplex operation
(IEEE 802.1p): allows real-time traffic classification mapped to four hardware queues per port
: Intuitive Web GUI allows for easy management of device by even nontechnical users
: provides a secure, easy-to-use graphical interface for configuring the module via HTTPS
: allows traffic to be mirrored on any port or a network analyzer to assist with diagnostics or detecting network
: provide an at-a-glance view of status, activity, speed, and full-duplex operation
(SFP)
: remotely detect cable issues using a browser-based tool
(LLDP): automated device discovery protocol for easy mapping by network
slots
: allow for fiber connectivity
DA - 13680 Worldwide — Version 14 — November 5, 2013
Page 1
Page 2
Retired
QuickSpecs
Overview
Performance
Link aggregation
connections
IGMP snooping
Layer 2 switching
VLAN support and tagging
providing security between workgroups
Spanning Tree
Security
Access control lists
Secure Sockets
switch
IEEE 802.1X
RADIUS server
Convergence
(trunking): groups together up to eight links per trunk to increase bandwidth and create redundant
: multicast filtering improves network performance, instead of flooding traffic to all ports
(STP/RSTP): prevents network loop
(ACLs): allow network managers to define classification actions and rules for specific ingress ports
Layer (SSL): encrypts all HTTP traffic, allowing secure access to the browser-based management GUI in the
: utilizes an industry-standard user authentication with an IEEE 802.1X supplicant on the client in conjunction with a
HP 1905 Switch Series
: support up to 64 port-based VLANs and dynamic configuration of IEEE 802.1Q VLAN tagging,
Auto Voice VLAN
IEEE 802.3af Power over Ethernet
devices such as IP phones, wireless access points, and security cameras (see product specifications for total PoE power
available)
Additional information
Green initiative support
Warranty and support
3-year warranty
Electronic and telephone support
refer to
refer to
Software releases
releases available with your product purchase, refer to
www.hp.com/networking/contact-support
www.hp.com/networking/warrantysummary
: recognizes IP phones and automatically assigns voice traffic to dedicated VLAN for IP phones
(1905-24-PoE): provides up to 15.4 W per port to IEEE 802.3af-compliant PoE-powered
: provides support for RoHS and WEEE regulations
: with advance replacement and next-business-day delivery (available in most countries)
: limited electronic and telephone support is available from HP; to reach our support centers,
; for details on the duration of support provided with your product purchase,
: to find software for your product, refer to
www.hp.com/networking/support
www.hp.com/networking/warrantysummary
; for details on the software
DA - 13680 Worldwide — Version 14 — November 5, 2013
Page 2
Page 3
Retired
QuickSpecs
HP 1905 Switch Series
Configuration
Build To Order:
BTO is a standalone unit with no integration. BTO products ship standalone are not part of a CTO or Rack-Shippable solution.
HP 1905-24 Switch
24 RJ-45 autosensing 10/100 ports
2 RJ-45 dual-personality 10/100/1000 ports
min=0 \ max=2 SFP Transceivers
1U - Height
HP 1905-48 Switch
48 RJ-45 autosensing 10/100 ports
2 RJ-45 dual-personality 10/100/1000 ports
min=0 \ max=2 SFP Transceivers
1U - Height
HP 1905-24-PoE Switch
24 RJ-45 autosensing 10/100 ports
2 RJ-45 dual-personality 10/100/1000 ports
min=0 \ max=2 SFP Transceivers
1U - Height
Configuration Rules:
Note 1
Note 9
The following Transceivers install into this switch:
HP X120 1G SFP LC LX Transceiver
HP X121 1G SFP LC LX Transceiver
HP X121 1G SFP LC SX Transceiver
Localization required. (See Localization Menu for list.)
Transceivers
SFP Transceivers
HP X121 1G SFP LC SX Transceiver
HP X121 1G SFP LC LX Transceiver
HP X120 1G SFP LC LX Transceiver
Internal Power Supplies
No Power supplies
Cables
JD990A
See Configuration
Note:1, 9
JD994A
See Configuration
Note:1, 9
JD992A
See Configuration
Note:1, 9
JD119B
J4859C
J4858C
J4858C
J4859C
JD119B
DA - 13680 Worldwide — Version 14 — November 5, 2013
Page 3
Page 4
Retired
QuickSpecs
Configuration
Multi-Mode Cables
HP .5m Multi-mode OM3 LC/LC FC Cable
HP 1m Multi-mode OM3 LC/LC FC Cable
HP 2 m Multimode OM3 LC/LC FC Cable
HP 5 m Multimode OM3 LC/LC FC Cable
HP 15 m Multimode OM3 LC/LC FC Cable
HP 30 m Multimode OM3 LC/LC FC Cable
HP 50 m Multimode OM3 LC/LC FC Cable
HP Premier Flex LC/LC OM4 2f 1m Cbl
HP Premier Flex LC/LC OM4 2f 2m Cbl
HP Premier Flex LC/LC OM4 2f 5m Cbl
HP Premier Flex LC/LC OM4 2f 15m Cbl
HP Premier Flex LC/LC OM4 2f 30m Cbl
HP Premier Flex LC/LC OM4 2f 50m Cbl
HP 1905 Switch Series
AJ833A
AJ834A
AJ835A
AJ836A
AJ837A
AJ838A
AJ839A
QK732A
QK733A
QK734A
QK735A
QK736A
QK737A
DA - 13680 Worldwide — Version 14 — November 5, 2013
Page 4
Page 5
Retired
QuickSpecs
Technical Specifications
HP 1905-24 Switch
Ports
Physical characteristics
Memory and processor
Mounting
Performance
Environment
Electrical characteristics
Safety
Emissions
Management
Notes
Services
(JD990A)
24 RJ-45 autosensing 10/100 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX);
Media Type: Auto-MDIX; Duplex: half or full
2 RJ-45 dual-personality 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type
100BASE-TX, IEEE 802.3ab Type 1000BASE-T)
1 RJ-45 serial console port
Dimensions
Weight
Processor
Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware included)
100 Mb Latency
1000 Mb Latency
Throughput
Routing/Switching
capacity
Operating temperature
Operating relative
humidity
Nonoperating/Storage
temperature
Nonoperating/Storage
relative humidity
Acoustic
Voltage
Frequency
UL 60950; IEC 60950-1; EN 60950-1; CAN/CSA-C22.2 No. 60950-1-03
FCC part 15 Class A; VCCI Class A; EN 55022 Class A; CISPR 22 Class A; EN 55024; EN 61000-3-2 2000,
61000-3-3; ICES-003 Class A
limited command-line interface; Web browser; SNMP Manager; IEEE 802.3 Ethernet MIB
The HP 1905-24 Switch (JD990A) was formerly sold as the 3Com Baseline Plus 2226 (3CBLSF26H) and may
ship with this product labeling.
3-year, 4-hour onsite, 13x5 coverage for hardware (UV792E)
3-year, 4-hour onsite, 24x7 coverage for hardware (UW015E)
3-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone support (UW021E)
3-year, 24x7 SW phone support, software updates (UV795E)
1-year, post-warranty, 4-hour onsite, 13x5 coverage for hardware (HR682E)
1-year, post-warranty, 4-hour onsite, 24x7 coverage for hardware (HR683E)
1-year, post-warranty, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone support
(HR684E)
4-year, 4-hour onsite, 13x5 coverage for hardware (UV793E)
4-year, 4-hour onsite, 24x7 coverage for hardware (UW016E)
4-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UW022E)
HP 1905 Switch Series
17.4(w) x 9.4(d) x 1.7(h) in (44.2 x 23.88 x 4.32 cm) (1U height)
6.8 lb (3.08 kg)
ARM 88E6218 @ 150 MHz, 8 MB SDRAM, 4 MB flash; packet buffer size: 384 KB
< 5 µs
< 5 µs
6.6 million pps
8.8 Gbps
32°F to 113°F (0°C to 45°C)
10% to 90%, non-condensing
–40°F to 158°F (–40°C to 70°C)
10% to 95%, non-condensing
Fanless
100-240 VAC
50/60 Hz
DA - 13680 Worldwide — Version 14 — November 5, 2013
Page 5
Page 6
Retired
QuickSpecs
Technical Specifications
4-year, 24x7 SW phone support, software updates (UV796E)
5-year, 4-hour onsite, 13x5 coverage for hardware (UV794E)
5-year, 4-hour onsite, 24x7 coverage for hardware (UW017E)
5-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UW023E)
5-year, 24x7 SW phone support, software updates (UV797E)
3 Yr 6 hr Call-to-Repair Onsite (UW018E)
4 Yr 6 hr Call-to-Repair Onsite (UW019E)
5 Yr 6 hr Call-to-Repair Onsite (UW020E)
1-year, 6 hour Call-To-Repair Onsite for hardware (HR686E)
1-year, 24x7 software phone support, software updates (HR685E)
Refer to the HP website at
and product numbers. For details about services and response times in your area, please contact your local
HP sales office.
HP 1905-48 Switch
Ports
(JD994A)
48 RJ-45 autosensing 10/100 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX);
Media Type: Auto-MDIX; Duplex: half or full
2 RJ-45 dual-personality 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type
100BASE-TX, IEEE 802.3ab Type 1000BASE-T)
www.hp.com/networking/services
HP 1905 Switch Series
for details on the service-level descriptions
Physical characteristics
Memory and processor
Mounting
Performance
Environment
Electrical characteristics
Safety
1 RJ-45 serial console port
Dimensions
Weight
Processor
Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware included)
100 Mb Latency
1000 Mb Latency
Throughput
Routing/Switching
capacity
Operating temperature
Operating relative
humidity
Nonoperating/Storage
temperature
Nonoperating/Storage
relative humidity
Acoustic
Voltage
Frequency
UL 60950; IEC 60950-1; EN 60950-1; CAN/CSA-C22.2 No. 60950-1-03
17.4(w) x 9.4(d) x 1.7(h) in (44.2 x 23.88 x 4.32 cm) (1U height)
6.4 lb (2.9 kg)
ARM 88E6218 @ 150 MHz, 8 MB SDRAM, 4 MB flash; packet buffer size: 384 MB
< 5 µs
< 5 µs
10.1 million pps
13.6 Gbps
32°F to 113°F (0°C to 45°C)
10% to 90%, non-condensing
–40°F to 158°F (–40°C to 70°C)
10% to 95%, non-condensing
Fanless
100-240 VAC
50/60 Hz
DA - 13680 Worldwide — Version 14 — November 5, 2013
Page 6
Page 7
Retired
QuickSpecs
Technical Specifications
Emissions
Management
Notes
Services
FCC part 15 Class A; VCCI Class A; EN 55022 Class A; CISPR 22 Class A; EN 55024; EN 61000-3-2 2000,
61000-3-3; ICES-003 Class A
limited command-line interface; Web browser; SNMP Manager; IEEE 802.3 Ethernet MIB
The HP 1905-48 Switch (JD994A) was formerly sold as the 3Com Baseline Plus 2250 (3CBLSF50H) and may
ship with this product labeling.
3-year, 4-hour onsite, 13x5 coverage for hardware (UV792E)
3-year, 4-hour onsite, 24x7 coverage for hardware (UW015E)
3-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone support (UW021E)
3-year, 24x7 SW phone support, software updates (UV795E)
1-year, post-warranty, 4-hour onsite, 13x5 coverage for hardware (HR682E)
1-year, post-warranty, 4-hour onsite, 24x7 coverage for hardware (HR683E)
1-year, post-warranty, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone support
(HR684E)
4-year, 4-hour onsite, 13x5 coverage for hardware (UV793E)
4-year, 4-hour onsite, 24x7 coverage for hardware (UW016E)
4-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UW022E)
4-year, 24x7 SW phone support, software updates (UV796E)
5-year, 4-hour onsite, 13x5 coverage for hardware (UV794E)
5-year, 4-hour onsite, 24x7 coverage for hardware (UW017E)
5-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UW023E)
5-year, 24x7 SW phone support, software updates (UV797E)
3 Yr 6 hr Call-to-Repair Onsite (UW018E)
4 Yr 6 hr Call-to-Repair Onsite (UW019E)
5 Yr 6 hr Call-to-Repair Onsite (UW020E)
1-year, 6 hour Call-To-Repair Onsite for hardware (HR686E)
1-year, 24x7 software phone support, software updates (HR685E)
HP 1905 Switch Series
HP 1905-24-PoE Switch
Ports
Physical characteristics
Memory and processor
Mounting
Performance
Refer to the HP website at
and product numbers. For details about services and response times in your area, please contact your local
HP sales office.
(JD992A)
24 RJ-45 autosensing 10/100 PoE ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE
802.3af PoE); Media Type: Auto-MDIX; Duplex: half or full
2 RJ-45 dual-personality 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type
100BASE-TX, IEEE 802.3ab Type 1000BASE-T)
1 RJ-45 serial console port
Dimensions
Weight
Processor
Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware included)
100 Mb Latency
1000 Mb Latency
Throughput
www.hp.com/networking/services
17.4(w) x 9.4(d) x 1.7(h) in (44.2 x 23.88 x 4.32 cm) (1U height)
7.1 lb (3.22 kg)
ARM 88E6218 @ 150 MHz, 8 MB SDRAM, 4 MB flash; packet buffer size: 384 MB
< 5 µs
< 5 µs
6.6 million pps
for details on the service-level descriptions
DA - 13680 Worldwide — Version 14 — November 5, 2013
Page 7
Page 8
Retired
QuickSpecs
Technical Specifications
Routing/Switching
capacity
Environment
Electrical characteristics
Safety
Emissions
Management
Notes
Services
Operating temperature
Operating relative
humidity
Nonoperating/Storage
temperature
Nonoperating/Storage
relative humidity
Voltage
Frequency
UL 60950; IEC 60950-1; EN 60950-1; CAN/CSA-C22.2 No. 60950-1-03
FCC part 15 Class A; VCCI Class A; EN 55022 Class A; CISPR 22 Class A; EN 55024; EN 61000-3-2 2000,
61000-3-3; ICES-003 Class A
limited command-line interface; Web browser; SNMP Manager; IEEE 802.3 Ethernet MIB
The HP 1905-24-PoE Switch (JD992A) was formerly sold as the 3Com Baseline Plus 2426 PWR
(3CBLSF26PWRH) and may ship with this product labeling.
3-year, 4-hour onsite, 13x5 coverage for hardware (UV792E)
3-year, 4-hour onsite, 24x7 coverage for hardware (UW015E)
3-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone support (UW021E)
3-year, 24x7 SW phone support, software updates (UV795E)
1-year, post-warranty, 4-hour onsite, 13x5 coverage for hardware (HR682E)
1-year, post-warranty, 4-hour onsite, 24x7 coverage for hardware (HR683E)
1-year, post-warranty, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone support
(HR684E)
4-year, 4-hour onsite, 13x5 coverage for hardware (UV793E)
4-year, 4-hour onsite, 24x7 coverage for hardware (UW016E)
4-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UW022E)
4-year, 24x7 SW phone support, software updates (UV796E)
5-year, 4-hour onsite, 13x5 coverage for hardware (UV794E)
5-year, 4-hour onsite, 24x7 coverage for hardware (UW017E)
5-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UW023E)
5-year, 24x7 SW phone support, software updates (UV797E)
3 Yr 6 hr Call-to-Repair Onsite (UW018E)
4 Yr 6 hr Call-to-Repair Onsite (UW019E)
5 Yr 6 hr Call-to-Repair Onsite (UW020E)
1-year, 6 hour Call-To-Repair Onsite for hardware (HR686E)
1-year, 24x7 software phone support, software updates (HR685E)
HP 1905 Switch Series
8.8 Gbps
32°F to 113°F (0°C to 45°C)
10% to 90%, non-condensing
–40°F to 158°F (–40°C to 70°C)
10% to 95%, non-condensing
100-240 VAC
50/60 Hz
Refer to the HP website at
and product numbers. For details about services and response times in your area, please contact your local
HP sales office.
DA - 13680 Worldwide — Version 14 — November 5, 2013
www.hp.com/networking/services
for details on the service-level descriptions
Page 8
Page 9
Retired
QuickSpecs
Accessories
HP 1905 Switch Series
accessories
Transceivers
HP X120 1G SFP LC LX Transceiver
HP X121 1G SFP LC SX Transceiver
HP X121 1G SFP LC LX Transceiver
Cables
HP .5m Multi-mode OM3 LC/LC Optical Cable
HP 1m Multi-mode OM3 LC/LC Optical Cable
HP 2m Multi-mode OM3 LC/LC Optical Cable
HP 5m Multi-mode OM3 LC/LC Optical Cable
HP 15m Multi-mode OM3 LC/LC Optical Cable
HP 30m Multi-mode OM3 LC/LC Optical Cable
HP 50m Multi-mode OM3 LC/LC Optical Cable
NEW HP Premier Flex LC/LC Multi-mode OM4 2 fiber 1m Cable
NEW HP Premier Flex LC/LC Multi-mode OM4 2 fiber 2m Cable
NEW HP Premier Flex LC/LC Multi-mode OM4 2 fiber 5m Cable
NEW HP Premier Flex LC/LC Multi-mode OM4 2 fiber 15m Cable
NEW HP Premier Flex LC/LC Multi-mode OM4 2 fiber 30m Cable
NEW HP Premier Flex LC/LC Multi-mode OM4 2 fiber 50m Cable
HP 1905 Switch Series
JD119B
J4858C
J4859C
AJ833A
AJ834A
AJ835A
AJ836A
AJ837A
AJ838A
AJ839A
QK732A
QK733A
QK734A
QK735A
QK736A
QK737A
DA - 13680 Worldwide — Version 14 — November 5, 2013
Page 9
Page 10
Retired
QuickSpecs
Accessory Product Details
NOTE:
Details are not available for all accessories. The following specifications were available at the time of publication.
HP X120 1G SFP LC LX
Transceiver
A small form-factor
pluggable (SFP) Gigabig LX
transceiver that provides a
full duplex Gigabit solution
up to 550m on MMF or
10Km on SMF
(JD119B)
Ports
Connectivity
Physical characteristics
Electrical characteristics
Cabling
Services
HP 1905 Switch Series
1 SFP 1000BASE-LX port (IEEE 802.3z Type 1000BASE-LX)
Connector type
Wavelength
Dimensions
Full configuration weight
Power consumption
typical
Power consumption
maximum
Cable type:
Either single mode or multimode;
Maximum distance:
• 550m for Multimode
• 10km for Singlemode
Fiber type
Refer to the HP website at:
the service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
LC
1300 nm
2.17(d) x 0.6(w) x 0.46(h) in. (5.51 x 1.52 x 1.17
cm)
0.04 lb. (0.02 kg)
0.8 W
1.0 W
Both
www.hp.com/networking/services
for details on
HP X121 1G SFP LC SX
Transceiver
A small form-factor
pluggable (SFP) Gigabit SX
transceiver that provides a
full-duplex Gigabit solution
up to 550 m on multimode
fiber.
(J4858C)
Ports
Physical characteristics
Environment
Electrical characteristics
Cabling
1 LC 1000BASE-SX port; Duplex: full only
Dimensions: 2.24(d) x 0.54(w) x 0.48(h) in. (5.69 x 1.37 x 1.22 cm)
Weight: 0.04 lb. (0.02 kg)
Transceiver form factor: SFP
Operating temperature: 32°F to 158°F (0°C to 70°C)
Operating relative humidity: 5% to 85%, noncondensing
Nonoperating/Storage temperature: -40°F to 203°F (-40°C to 85°C)
Altitude: up to 10,000 ft. (3 km)
Power consumption typical: 0.4 W
Power consumption maximum: 0.7 W
Type:
62.5/125 µm or 50/125 µm (core/cladding) diameter, graded-index, low
metal content, multimode fiber optic, complying with ITU-T G.651 and
ISO/IEC 793-2 Type A1b or A1a, respectively;
Maximum distance:
2-220 m (62.5 µm core diameter, 160 MHz*km bandwidth
2-275 m (62.5 µm core diameter, 200 MHz*km bandwidth
2-500 m (50 µm core diameter, 400 MHz*km bandwidth)
2-550 m (50 µm core diameter, 500 MHz*km bandwidth)
DA - 13680 Worldwide — Version 14 — November 5, 2013
Page 10
Page 11
Retired
QuickSpecs
Accessory Product Details
Services
HP X121 1G SFP LC LX
Transceiver
HP X121 1G SFP LC LX
Transceiver: An SFP format
gigabit transceiver with LC
connectors using LX
technology.
(J4859C)
Ports
Physical characteristics
Environment
Cabling
HP 1905 Switch Series
Cable length: 2-550m
Fiber type: Multi Mode
Refer to the HP website at
service-level descriptions and product numbers. For details about services and
response times in your area, please contact your local HP sales office.
1 LC 1000BASE-LX port (IEEE 802.3z Type 1000BASE-LX); Duplex: full only
Dimensions: 2.24(d) x 0.54(w) x 0.486(h) in. (5.69 x 1.37 x 1.23 cm)
Weight:0.04 lb. (0.02 kg)
Operating temperature: 32°F to 158°F (0°C to 70°C)
Operating relative humidity: 0% to 85%, noncondensing
Nonoperating/Storage temperature: -40°F to 212°F (-40°C to 100°C)
Altitude: up to 10,000 ft. (3 km)
Type:
Either single mode or multimode; 62.5/125 µm or 50/125 µm
(core/cladding) diameter, graded-index, low metal content, multimode
fiber optic, complying with ITU-T G.651 and ISO/IEC 793-2 Type A1b or
A1a, respectively; Low metal content, single-mode fiber-optic,
complying with ITU-T G.652 and ISO/IEC 793-2 Type B1;
www.hp.com/networking/services
for details on the
Notes
Services
Maximum distance:
2-550 m (multimode 62.5 µm core diameter, 500 MHz*km bandwidth)
2-550 m (multimode 50 µm core diameter, 400 MHz*km bandwidth)
2-550 m (multimode 50 µm core diameter, 500 MHz*km bandwidth)
2-10,000 m (single-mode fiber)
A mode conditioning patch cord may be needed in some multimode fiber
installations.
Wavelength: 1310nm
Power Consumption: < 500mW Typical
Refer to the HP website at
service-level descriptions and product numbers. For details about services and
response times in your area, please contact your local HP sales office.
www.hp.com/networking/services
for details on the
DA - 13680 Worldwide — Version 14 — November 5, 2013
Page 11
Page 12
Retired
QuickSpecs
Accessory Product Details
HP 0.5 m Multimode OM3
LC/LC Optical Cable
(AJ833A)
Cabling
Notes
Services
HP 1905 Switch Series
Cable type
50/125 µm (core/cladding) diameter, mulitimode fiber optic, with effective
modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC for distances of
up to 300 m
Maximum distance
10Gbps Transfer Rate (Ethernet): 300m
Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125 um
fiber optic cable and Ethernet assembly with LC duplex connectors on one end
and LC duplex connectors on other end.
Refer to the HP website at
the service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
:
:
Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ± 2.0um
Coating diameter: 245 ± 10um
Optical glass: Bandwidth: For LED sources: 1500/500 MHz-km
@850/1300nm.
Optical glass: Bandwidth: For Laser sources: 2000/500 MHz-km
@850/1300nm. VCSEL Laser sources: 600 / 600 meters @850/1300nm
for Gigabit Ethernet compliant links.
CABLE: The cable is duplex zipcord graded index 50/125um multimode
optical fiber and designed to work in both the 850 and 1300 nm
wavelength windows.
BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
Jacket Material: Riser Grade - Low Smoke Zero Halogen thermoplastic.
Jacket Color: Aqua for OM3 multimode per TIA 598
Boot Color: White
Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003 dB/M
added for lengths > 30 meters.
Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @ 1310
nm @ 23°C as tested in accordance with EIA 455-46.
Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg
www.hp.com/networking/services
for details on
DA - 13680 Worldwide — Version 14 — November 5, 2013
Page 12
Page 13
Retired
QuickSpecs
Accessory Product Details
HP 1 m Multimode OM3
LC/LC Optical Cable
(AJ834A)
Cabling
Notes
Services
HP 1905 Switch Series
Cable type
50/125 µm (core/cladding) diameter, mulitimode fiber optic, with effective
modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC for distances of
up to 300 m
Maximum distance
10Gbps Transfer Rate (Ethernet): 300m
Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125 um
fiber optic cable and Ethernet assembly with LC duplex connectors on one end
and LC duplex connectors on other end.
Refer to the HP website at
the service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
:
:
Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ± 2.0um
Coating diameter: 245 ± 10um
Optical Glass Bandwidth: For LED sources: 1500/500 MHz-km
@850/1300nm.
Optical Glass: For Laser sources: 2000/500 MHz-km @850/1300nm.
VCSEL Laser sources: Shall achieve 600 / 600 meters @850/1300nm for
Gigabit Ethernet compliant links.
CABLE: The cable is duplex zipcord graded index 50/125um multimode
optical fiber. The cable is designed to work in both the 850 and 1300 nm
wavelength windows.
BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
Jacket Material: Riser Grade - Low Smoke Zero Halogen thermoplastic.
Jacket Color: Aqua for OM3 multimode per TIA 598
Boot Color: White
Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003 dB/M
added for lengths > 30 meters.
Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @ 1310
nm @ 23°C as tested in accordance with EIA 455-46.
Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg
www.hp.com/networking/services
for details on
DA - 13680 Worldwide — Version 14 — November 5, 2013
Page 13
Page 14
Retired
QuickSpecs
Accessory Product Details
HP 2 m Multimode OM3
LC/LC Optical Cable
(AJ835A)
Cabling
Notes
Services
HP 1905 Switch Series
Cable type
50/125 µm (core/cladding) diameter, mulitimode fiber optic, with effective
modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC for distances of
up to 300 m;
Maximum distance
10Gbps Transfer Rate (Ethernet): 300m
Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125 um
fiber optic cable and Ethernet assembly with LC duplex connectors on one end
and LC duplex connectors on other end.
Refer to the HP website at
the service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
:
:
Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ± 2.0um
Coating diameter: 245 ± 10um
Optical Glass Bandwidth: For LED sources: 1500/500 MHz-km
@850/1300nm.
Optical Glass: For Laser sources: 2000/500 MHz-km @850/1300nm.
VCSEL Laser sources: Shall achieve 600 / 600 meters @850/1300nm for
Gigabit Ethernet compliant links.
CABLE: The cable is duplex zipcord graded index 50/125um multimode
optical fiber. The cable is designed to work in both the 850 and 1300 nm
wavelength windows.
BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
Jacket Material: Riser Grade - Low Smoke Zero Halogen thermoplastic.
Jacket Color: Aqua for OM3 multimode per TIA 598
Boot Color: White
Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003 dB/M
added for lengths > 30 meters.
Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @ 1310
nm @ 23°C as tested in accordance with EIA 455-46.
Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg
www.hp.com/networking/services
for details on
DA - 13680 Worldwide — Version 14 — November 5, 2013
Page 14
Page 15
Retired
QuickSpecs
Accessory Product Details
HP 5 m Multimode OM3
LC/LC Optical Cable
(AJ836A)
Cabling
Notes
Services
HP 1905 Switch Series
Cable type
50/125 µm core/cladding) diameter, mulitimode fiber optic, with effective
modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC for distances of
up to 300 m;
Maximum distance
10Gbps Transfer Rate (Ethernet): 300m
Cable Specs: This specification defines the detail requirements for a tight
buffered duplex fiber optic multimode OM3 50/125 um fiber optic cable and
Ethernet assembly with LC duplex connectors on one end and LC duplex
connectors on other end.
Refer to the HP website at
the service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
:
:
Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ± 2.0um
Coating diameter: 245 ± 10um
Optical Glass Bandwidth: For LED sources: 1500/500 MHz-km
@850/1300nm.
Optical Glass: For Laser sources: 2000/500 MHz-km @850/1300nm.
VCSEL Laser sources: Shall achieve 600 / 600 meters @850/1300nm for
Gigabit Ethernet compliant links.
CABLE: The cable is duplex zipcord graded index 50/125um multimode
optical fiber. The cable is designed to work in both the 850 and 1300 nm
wavelength windows.
BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
Jacket Material: Riser Grade - Low Smoke Zero Halogen thermoplastic.
Jacket Color: Aqua for OM3 multimode per TIA 598
Boot Color: White
Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003 dB/M
added for lengths > 30 meters.
Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @ 1310
nm @ 23°C as tested in accordance with EIA 455-46.
Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg
www.hp.com/networking/services
for details on
DA - 13680 Worldwide — Version 14 — November 5, 2013
Page 15
Page 16
Retired
QuickSpecs
Accessory Product Details
HP 15 m Multimode OM3
LC/LC Optical Cable
(AJ837A)
Cabling
Notes
Services
HP 1905 Switch Series
Cable type
50/125 µm (core/cladding) diameter, mulitimode fiber optic, with effective
modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC for distances of
up to 300 m;
Maximum distance
10Gbps Transfer Rate (Ethernet): 300m
Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125 um
fiber optic cable and Ethernet assembly with LC duplex connectors on one end
and LC duplex connectors on other end.
Refer to the HP website at
the service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
:
:
Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ± 2.0um
Coating diameter: 245 ± 10um
Optical Glass Bandwidth: For LED sources: 1500/500 MHz-km
@850/1300nm.
Optical Glass: For Laser sources: 2000/500 MHz-km @850/1300nm.
VCSEL Laser sources: Shall achieve 600 / 600 meters @850/1300nm for
Gigabit Ethernet compliant links.
CABLE: The cable is duplex zipcord graded index 50/125um multimode
optical fiber. The cable is designed to work in both the 850 and 1300 nm
wavelength windows.
BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
Jacket Material: Riser Grade - Low Smoke Zero Halogen thermoplastic.
Jacket Color: Aqua for OM3 multimode per TIA 598
Boot Color: White
Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003 dB/M
added for lengths > 30 meters.
Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @ 1310
nm @ 23°C as tested in accordance with EIA 455-46.
Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg
www.hp.com/networking/services
for details on
DA - 13680 Worldwide — Version 14 — November 5, 2013
Page 16
Page 17
Retired
QuickSpecs
Accessory Product Details
HP 30 m Multimode OM3
LC/LC Optical Cable
(AJ838A)
Cabling
Notes
Services
HP 1905 Switch Series
Cable type
50/125 µm (core/cladding) diameter, mulitimode fiber optic, with effective
modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC for distances of
up to 300 m;
Maximum distance
10Gbps Transfer Rate (Ethernet): 300m
Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125 um
fiber optic cable and Ethernet assembly with LC duplex connectors on one end
and LC duplex connectors on other end.
Refer to the HP website at
the service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
:
:
Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ± 2.0um
Coating diameter: 245 ± 10um
Optical Glass Bandwidth: For LED sources: 1500/500 MHz-km
@850/1300nm.
Optical Glass: For Laser sources: 2000/500 MHz-km @850/1300nm.
VCSEL Laser sources: Shall achieve 600 / 600 meters @850/1300nm for
Gigabit Ethernet compliant links.
CABLE: The cable is duplex zipcord graded index 50/125um multimode
optical fiber. The cable is designed to work in both the 850 and 1300 nm
wavelength windows.
BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
Jacket Material: Riser Grade - Low Smoke Zero Halogen thermoplastic.
Jacket Color: Aqua for OM3 multimode per TIA 598
Boot Color: White
Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003 dB/M
added for lengths > 30 meters.
Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @ 1310
nm @ 23°C as tested in accordance with EIA 455-46.
Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg
www.hp.com/networking/services
for details on
DA - 13680 Worldwide — Version 14 — November 5, 2013
Page 17
Page 18
Retired
QuickSpecs
Accessory Product Details
HP 50 m Multimode OM3
LC/LC Optical Cable
(AJ839A)
Cabling
Notes
Services
HP 1905 Switch Series
Cable type
50/125 µm (core/cladding) diameter, mulitimode fiber optic, with effective
modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC for distances of
up to 300 m;
Maximum distance
10Gbps Transfer Rate (Ethernet): 300m
Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125 um
fiber optic cable and Ethernet assembly with LC duplex connectors on one end
and LC duplex connectors on other end.
Refer to the HP website at
the service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
:
:
Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ± 2.0um
Coating diameter: 245 ± 10um
Optical Glass Bandwidth: For LED sources: 1500/500 MHz-km
@850/1300nm.
Optical Glass: For Laser sources: 2000/500 MHz-km @850/1300nm.
VCSEL Laser sources: Shall achieve 600 / 600 meters @850/1300nm for
Gigabit Ethernet compliant links.
CABLE: The cable is duplex zipcord graded index 50/125um multimode
optical fiber. The cable is designed to work in both the 850 and 1300 nm
wavelength windows.
BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
Jacket Material: Riser Grade - Low Smoke Zero Halogen thermoplastic.
Jacket Color: Aqua for OM3 multimode per TIA 598
Boot Color: White
Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003 dB/M
added for lengths > 30 meters.
Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @ 1310
nm @ 23°C as tested in accordance with EIA 455-46.
Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg
www.hp.com/networking/services
for details on
DA - 13680 Worldwide — Version 14 — November 5, 2013
Page 18
Page 19
Retired
QuickSpecs
Accessory Product Details
HP Premier Flex LC/LC
Multi-mode OM4 2 fiber
1m Cable (QK732A)
Notes
Services
HP 1905 Switch Series
Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+ 50/125um
duplex cable and Ethernet assembly with LC duplex connectors on each end.
• Core Diameter: 50um ±3um, Cladding diameter: 125um ±2um; Coating
diameter: 245 ± 10um
• Bandwidth: 3000 MHz-km @ 850nm (Laser)
• Jacket Color: Blue
• Jacket Material: Riser Grade – Low Smoke Zero Halogen (LSZH) thermoplastic
• Boot Color: White
• Outer Jacket Print: HP PremierFlex OM3+ Fiber Optic Cable, 50/125um, Type
OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable also has a longitudinal white
stripe that runs the entire length of the cable.
• Insertion Loss: Less than 0.5dB @ 850nm with LED source, 0.003dB/m added
for lengths >30m
• Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @ 1310nm @
23°C as tested in accordance with EIA 455-45
Refer to the HP website at
the service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
www.hp.com/networking/services
for details on
HP Premier Flex LC/LC
Multi-mode OM4 2 fiber
2m Cable (QK733A)
Notes
Services
Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+ 50/125um
duplex cable and Ethernet assembly with LC duplex connectors on each end.
• Core diameter: 50um ±3um, Cladding diameter: 125um ±2um; Coating
diameter: 245 ± 10um
• Bandwidth: 3000 MHz-km @ 850nm (Laser)
• Jacket Color: Blue
• Jacket Material: Riser Grade – Low Smoke Zero Halogen (LSZH) thermoplastic
• Boot Color: White
• Outer Jacket Print: HP PremierFlex OM3+ Fiber Optic Cable, 50/125um, Type
OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable also has a longitudinal white
stripe that runs the entire length of the cable.
• Insertion Loss: Less than 0.5dB @ 850nm with LED source, 0.003dB/m added
for lengths >30m
• Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @ 1310nm @
23°C as tested in accordance with EIA 455-45
Refer to the HP website at
the service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
www.hp.com/networking/services
for details on
DA - 13680 Worldwide — Version 14 — November 5, 2013
Page 19
Page 20
Retired
QuickSpecs
Accessory Product Details
HP Premier Flex LC/LC
Multi-mode OM4 2 fiber
5m Cable (QK734A)
Notes
Services
HP 1905 Switch Series
Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+ 50/125um
duplex cable and Ethernet assembly with LC duplex connectors on each end.
• Core diameter: 50um ±3um, Cladding diameter: 125um ±2um; Coating
diameter: 245 ± 10um
• Bandwidth: 3000 MHz-km @ 850nm (Laser)
• Jacket Color: Blue
• Jacket Material: Riser Grade – Low Smoke Zero Halogen (LSZH) thermoplastic
• Boot Color: White
• Outer Jacket Print: HP PremierFlex OM3+ Fiber Optic Cable, 50/125um, Type
OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable also has a longitudinal white
stripe that runs the entire length of the cable.
• Insertion Loss: Less than 0.5dB @ 850nm with LED source, 0.003dB/m added
for lengths >30m
• Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @ 1310nm @
23°C as tested in accordance with EIA 455-45
Refer to the HP website at
the service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
www.hp.com/networking/services
for details on
HP Premier Flex LC/LC
Multi-mode OM4 2 fiber
15m Cable
(QK735A)
Notes
Services
Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+ 50/125um
duplex cable and Ethernet assembly with LC duplex connectors on each end.
• Core diameter: 50um ±3um, Cladding diameter: 125um ±2um; Coating
diameter: 245 ± 10um
• Bandwidth: 3000 MHz-km @ 850nm (Laser)
• Jacket Color: Blue
• Jacket Material: Riser Grade – Low Smoke Zero Halogen (LSZH) thermoplastic
• Boot Color: White
• Outer Jacket Print: HP PremierFlex OM3+ Fiber Optic Cable, 50/125um, Type
OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable also has a longitudinal white
stripe that runs the entire length of the cable.
• Insertion Loss: Less than 0.5dB @ 850nm with LED source, 0.003dB/m added
for lengths >30m
• Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @ 1310nm @
23°C as tested in accordance with EIA 455-45
Refer to the HP website at
the service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
www.hp.com/networking/services
for details on
DA - 13680 Worldwide — Version 14 — November 5, 2013
Page 20
Page 21
Retired
QuickSpecs
Accessory Product Details
HP Premier Flex LC/LC
Multi-mode OM4 2 fiber
30m Cable
(QK736A)
Notes
Services
HP 1905 Switch Series
Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+ 50/125um
duplex cable and Ethernet assembly with LC duplex connectors on each end.
• Core diameter: 50um ±3um, Cladding diameter: 125um ±2um; Coating
diameter: 245 ± 10um
• Bandwidth: 3000 MHz-km @ 850nm (Laser)
• Jacket Color: Blue
• Jacket Material: Riser Grade – Low Smoke Zero Halogen (LSZH) thermoplastic
• Boot Color: White
• Outer Jacket Print: HP PremierFlex OM3+ Fiber Optic Cable, 50/125um, Type
OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable also has a longitudinal white
stripe that runs the entire length of the cable.
• Insertion Loss: Less than 0.5dB @ 850nm with LED source, 0.003dB/m added
for lengths >30m
• Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @ 1310nm @
23°C as tested in accordance with EIA 455-45
Refer to the HP website at
the service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
www.hp.com/networking/services
for details on
HP Premier Flex LC/LC
Multi-mode OM4 2 fiber
50m Cable
To learn more, visit:
© Copyright 2010-2013 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without
notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products
and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial
errors or omissions contained herein.
(QK737A)
www.hp.com/networking
Notes
Services
Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+ 50/125um
duplex cable and Ethernet assembly with LC duplex connectors on each end.
• Core diameter: 50um ±3um, Cladding diameter: 125um ±2um; Coating
diameter: 245 ± 10um
• Bandwidth: 3000 MHz-km @ 850nm (Laser)
• Jacket Color: Blue
• Jacket Material: Riser Grade – Low Smoke Zero Halogen (LSZH) thermoplastic
• Boot Color: White
• Outer Jacket Print: HP PremierFlex OM3+ Fiber Optic Cable, 50/125um, Type
OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable also has a longitudinal white
stripe that runs the entire length of the cable.
• Insertion Loss: Less than 0.5dB @ 850nm with LED source, 0.003dB/m added
for lengths >30m
• Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @ 1310nm @
23°C as tested in accordance with EIA 455-45
Refer to the HP website at
the service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
www.hp.com/networking/services
for details on
DA - 13680 Worldwide — Version 14 — November 5, 2013
Page 21
Loading...