Quick guide
THANK YOU FOR BUYING A
HOTPOINT-ARISTON PRODUCT
In order to receive a more complete assistance, please
register your product on www . hotpoint . eu/ register
FIRST TIME USE
Wait at least two hours, after the installation, before connecting
the appliance to the power supply. Connect the appliance to the
power supply it starts the operation automatically. The ideal storage
temperatures for the food are preset in the factory.
CONTROL PANEL
EN
Before using the appliance carefully read the Safety
Instruction.
After turning the appliance on, you must wait for 4-6 hours for the
correct storage temperature to be reached for a normally lled
appliance. Position the antibacterial anti-odour lter in the fan as
demonstrated in the lter packaging (if available). If the audible signal
sounds, it means that the temperature alarm has intervened: press the
button to switch o the acoustic alarms.
1. 2. 3. 4. 5. 6. 7. 8. 9.
10.11.13.14. 12.
REFRIGERATOR COMPARTMENT TEMPERATURE
It is possible to set a dierent temperature with the button (14).
Recommended setting: +4°C
FAST COOL
Press the button (14) for 3 seconds to quickly cool the refrigerator
compartment. When the function is turned on the icon (2) lights up.
The function automatically turns o after 6 hours, or manually by
pressing the button (14) again for 3 seconds.
ON/STANDBY
Press the button (13) for 3 seconds to turn the appliance in
stand-by.
In Stand-by mode the light in the refrigerator compartment does not
turn on. Press the button again briey to reactivate the appliance.
"ACTIVE OXYGEN" FUNCTION
To activate the Active Oxygen function, press the button (13) on
the control panel.
Through the emission of a small quantity of ozone, this function
enables a reduction in the proliferation of bacteria and microorganisms
inside the refrigerator and limits bad odours.
When the function is activated, led O
To deactivate the function, simply press the button (13) on the control
panel.
will lit up.
3
FREEZER COMPARTMENT TEMPERATURE
It is possible to set a dierent temperature with the button (12).
Recommended setting: -18°C
TEMPERATURE DISPLAY
The display shows the refrigerator compartment temperature between
2°C and 8° C (See Control Panel, Refrigerator temperature digits 1) and
the temperature of the freezer compartment between -16°C and -24°C
(See Control Panel, Freezer temperature digits 4).
To avoid food waste, please refer to the recommended setting and storage
times found in the online user manual.
1. Refrigerator temperature digits
2. Fast Cool indicator
3. Precision control indicator
4. Freezer temp digits
5. Fast Freezer indicator
6. Door open indicator
7. Black out indicator
8. Party mode indicator
9. Vacation mode indicator
10. Mode button
11. Stop alarm button
12. Freezer Temperature / fast freeze (3sec)
button
13. Ozonizer / Stand-By (3sec) Button
14. REfrigerator temperature / Fast Cooling
(3sec) Button
FAST FR EEZE
This function is recommended for freezing fresh food. Fresh food
should be frozen as quickly as possible, for the best possible
preservation and for keeping its nutritional value. Press the Fast Freeze
button (12) for 3 seconds when you need to freeze fresh food; the Fast
Freeze indicator (5) will lights up.
We recommend you to press the Fast Freeze button 24 hours before
putting the food in, in order to prepare the freezer compartment for
the best possible freezing conditions. We recommend you use the
bottom.
Note: avoid a direct contact between the fresh food and the food that is
already frozen. To optimise the freezing speed, drawers can be removed
and the food can be placed directly on the bottom of the compartment.
TURNING OFF THE SOUND ALARM
To turn o the sound alarm, briey press the button (11).
MODE BUTTON
Allows to select among 2 or more available options. Once
MODE is pressed, the rst option is selected.
Further pressure of MODE scrolls among the dierent options.
Loop of scrolling is:
Pressure 1: The 1
Up
Pressure 2: The 2
Up
Pressure 3: Options O (if any option has been selected); Mode Button
Light O
Vacation Mode: You can use this function in the event of a prolonged
absence from home. The display will show the temperature of the
refrigerator compartment (+12°C) and the Vacation mode icon will light
up. After activating this function, remove the food from the refrigerator
compartment and keep both doors closed - the refrigerator will
maintain a suitable temperature to prevent odours from forming. The
freezer, however, remains at the temperature originally set. A deep
clean (of both refrigeration and freezer compartment) is recommended
before activating this function in order to prevent the spread of
bacteria.
Party Mode: Use this function to chill drinks inside the freezer
th
option is shown (Party mode); Mode Button Lights
nd
option shown (Vacation mode); Mode Button Lights
* Available only on certain models
compartment.
Important: do not leave the bottle inside the freezer compartment
longer than the function is active (30 minutes). An acoustic signal will
advice the end of the function.
Press the ALARM button or the MODE button to turn o the alarm.
ACTIVE FREEZE
This is an advanced technology that reduces temperature
uctuations in the whole freezer compartment. Freezer burns are reduced
and food preserves its original quality and color.
HOW TO STORE FRESH FOOD AND BEVERAGES
This function is automatically engaged when the temperature is between
-22°C and -24°C. If the function is engaged and the user modify
the freezer temperature out of the working range, the function is
automatically switched o. This feature can be disable by pressing Stop
Alarm and Freezer Compartment button together for 3 seconds.
Legend
MINOR COOL ZONE
Suggested for the storage of tropical fruit, cans, drinks,
eggs, sauces, pickles, butter, jam
COOL ZONE
Suggested for the storage of cheese, milk, daily food,
delicatessen, yogurt
COOLEST AREA
Suggested for storage of cold cuts, desserts, meat and
sh.
FRUIT & VEGETABLE DRAWER
REFRIGERATOR COMPARTMENT
Multi Fresh Zone
3 temperature selection to optimally preserve: Meat/Fish; Dairy; Fruit/
Veggies, oering also extra storage space for your fresh greens.
Settings:
LOW = Meat and Fish
MID = Dairy Food (Cheese and Yogurt)
HIGH = Fruits and vegetables
For the correct functioning of the “Multi Fresh zone” drawer, it is
necessary that:
• the appliance is turned on
• one of the following special functions is not selected: Standby,
Cooling-O, Vacation (in this case, remove the food contained in it).
FREEZER DRAWERS
FREEZING ZONE DRAWER
(Max cool zone)
Suggested to freeze fresh/cooked food
The load limits are determined by the particular construction (baskets,
containers, aps, drawers, shelves, etc.), or the load limits are determined by
natural load limits.
Multiow Air Distribution
The multiow helps to distribute evenly the cold air in the cavity for
a better food preservation. Food can be placed on any shelf of the
appliance. Please pay attention to not obstruct the air distribution
vents thus ensuring its free movement.
* Available only on certain models
Light system (depending on model)
This product contains a light source of energy
eciency class G
This product contains 2/4 lateral light sources
of energy eciency class A and a top light
source of energy class G
This product contains a light source of energy
eciency class G
FREEZER COMPARTMENT
Total No Frost system
The Total No Frost system eectively prevents ice formation, avoiding
the hassle of manual defrosting both in freezer and fridge cavity.
Its ventilation system provides perfect circulation of cold air in both
cavities thus avoiding ice builds up.
Ice cubes*
Fill 2/3 of the ice tray with water and put it back in the freezer
compartment.
Do not use sharp or pointed objects to remove the ice under any
circumstances.
The quantity of fresh food that can be frozen in 12 and 24 hours is written
on the rating plate.
GENERAL INFORMATION
The drawers, baskets and shelves should be kept in their current position
unless otherwise specied in this quick guide.
The light system inside the refrigerator compartment uses LED lights,
allowing for better lighting than with traditional light bulbs, as well as for
very low energy consumption.
DISPOSAL
Doors and lids of the refrigeration appliance should be removed before
disposal in the landll, to avoid children or animals getting trapped inside.
This product contains a top light source of
energy eciency class G
Easy access tray*
Freezer tray is useful to easily access frequently used products, freeze
or simply store leftovers or small items.
Humidity control*
Turn the knob to the left if you are storing vegetables ( for which a
more humid environment is recommended), rotate the knob to the
right if you are storing fruit ( for which a less humid environment
is recommended), turn the knob to the middle if you are storing a
mixture of fruit and vegetables.
REMOVING THE DRAWERS
Pull the drawers outwards as far as they will go, lift them up and remove
them. To get more volume, the freezer compartment can be used without
the drawers.
Make sure that the door is closed properly after putting the food back on
the grilles/shelves.
** Independently tested by IMSL (Industrial Microbiological Services Ltd,
UK) using ISO 22196
TROUBLESHOOTING
What to do if... Possible reasons Solutions
The control panel is
switched o, the appliance
does not work.
The inside light does not
work.
The temperature inside the
compartments is not low
enough.
The front edge of the
appliance, at the door striker
seal, is hot.
The icon 6 ligths up,
ashes and an acoustic
signal sounds.
The icon 7 ligths up,
ashes and an acoustic
signal sounds and freezer
temperature display ashes
the temperature reached.
The appliance could be in On/Standby
mode.
There may be an appliance power
supply problem.
The light may need replacing. Contact the Authorized service center.
The appliance could be in On/Standby
mode.
There could be various causes (see
“Cures”).
This is not a defect. It prevents
condensation from forming.
Door open alarm
It is activated when a door remains open
for a long period of time.
Black Out alarm
It is activated in case of a prolonged
power outage causing an increase in the
freezer compartment temperature.
Note: A dierent product temperature
cannot be set until the Black Out alarm is
deactivated.
Activate the appliance with the On/Standby button.
Make sure:
• there is not a power outage
• the plug is properly inserted in the power socket and the mains
double-pole switch (if present) is in the correct position (i.e. allows
the appliance to be powered)
• the household electrical system protection devices are ecient
• the power cable is not broken.
Activate the appliance with the On/Standby button.
Make sure:
• the doors close properly
• the appliance is not installed near a heat source
• the set temperature is adequate
• the circulation of air through the vents at the bottom of the
appliance is not obstructed.
No cure is necessary.
Close the doors of the product to deactivate the acoustic signal.
Before deactivating the acoustic signal, it is advisable to pay attention
to the temperature shown on the Freezer temperature display,
corresponding to the highest temperature reached in the freezer
compartment during the black out. Press the “Stop Alarm” button
briey to deactivate the acoustic signal. After pressing the button, the
temperature display shows the set temperatures again. If the freezer
compartment has not yet reached the optimum food preservation
temperature, the freezer compartment temperature alarm could be
activated (see freezer compartment temperature alarm). Check the
food before consuming it.
The “Stop Alarm” button
ligths up, the freezer
temperatture display
ashes, and an acoustic
signal sounds.
The letters “F” and "E"
ashes on the display.
* Available only on certain models
Policies, standard documentation and additional product information can be found by:
• Visiting our website docs . hotpoint . eu
• Using QR Code
• Alternatively, contact our After-sales Service (See phone number in the warranty booklet). When
contacting our After-sales Service, please state the codes provided on your product's identication plate.
The model information can be retrieved using the QR-Code indicated on the energy label. The label also includes
the model identier that can be used to consult the https://eprel.ec.europa.eu database portal.
Freezer compartment temperature
alarm
The freezer compartment temperature
alarm indicates that the compartment
temperature is not optimum. This may
happen: with rst use, after defrosting
and/or cleaning, if large amounts of
food are placed inside the freezer or
when the freezer door has not been
closed properly.
Malfunction alarm
The alarm indicates a fault in a technical
component.
Press the “Stop Alarm” button briey to deactivate the acoustic signal:
The freezer temperature display stops ashing. The “Stop Alarm”
button goes o automatically when optimum temperature conditions
are reached. If the freezer compartment temperature alarm stays on,
contact the Authorised Service Centre.
Call the authorised Service Centre.
400011513739
Loading...