Hotpoint HTWP1400F Dimension Manual

HTWP1400F– Hotpoint ® 3.5 DOE cu. ft. capacity washer

Specification Created 2/13

460157

Washer Dimensions (in inches)

36

25-1/2

42

51

Side View

27

Rear View

Circuit Requirements: An individual, properly-grounded branch circuit,
with a three-prong grounding-type receptacle, protected by a 15 or
20 amp circuit breaker or a time-delay fuse, is required.

Electrical Rating: 115V, 60Hz, 10 Amps

Installation Information: Before installing, consult installation

instructions packed with product for current dimensional data.

Washer Note: Washer wall outlet must be located within 36" of
service cord entry. Wall outlet must not be located behind dryer.

Listed by
Underwriters
Laboratories

Features and Benefits

• Plastic ribbed basket - Removes more moisture than smooth baskets

• Auto balance suspension system - Handles the heaviest loads without banging or walking

• Dual-Action Agitator - Provides gentle, dual-wash action

• Power Rinse option - Optional deep-rinse cycle ensures clothes are rinsed of soap residue

and fabric softener

• 4 water levels - Select water level based on load size

• 8 wash cycles - Handle various fabrics and soils

• 3 wash/rinse temperatures - A variety of temperatures provide great wash results

• Model HTWP1400FWW – White

HTWP1400F– Hotpoint ® 3.7 DOE cu. ft. capacity washer

Specification Created 2/13

460157