Hoshizaki IM200BAB Specifications

IM-200BAB
W x D x H
39
1/2
5/8
" x 23
*including 6” legs
Shipping Dimensions
7/10
43
” x 27
SELF-CONTAINED SQUARE CUBER WITH BUILT-IN STORAGE BIN
1/2
" x 33
5/8
” x 34
"*
7/16
IM-200BAB
Air-Cooled
IM-200BAB
05/31/18
Item # 13449
Item #:
Qty:
AIA#:
Features
Large, individual, clear square cubes
Self-contained with built-in storage bin
Each cube is made individually by a dedicated jet spray
• Up to 186 lbs. of ice production per 24 hours
• Built-in storage capacity 75 lbs.*
• EverCheckTM alert system
• Durable stainless steel exterior
• Removable air filter
• Ice scoop included
• Five 6” adjustable legs are standard
• 5’ 7/8” (1.8 m) power cord with NEMA 5-15P plug
• R-404A Refrigerant
Warranty
• 3 year Parts & Labor on entire machine.
• 5 year Parts on Compressor; air-cooled condenser coil.
Valid in United States, Canada, Puerto Rico & U.S. Territories. Contact factory for warranty in other countries.
TM
ICE PRODUCTION
Condenser
Air-Cooled
*Rated in accordance with AHRI Standard 820(I-P). Capacity based on 100% of total volume x 30 lb/ft3 average density of ice.
Model
IM-200BAB
Air / Water Temp
Lbs. per 24 hours
70°/ 50°F 90°/ 70°F
186
IM Cube Dimensions*
approx.
1/4
1
(32mm)
approx.
1”
(28mm)
155
WATER USAGE
8.2
Max. Fuse Size
or HACR
Circuit Breaker
15A
Potable
Gal. per 100 lbs.
90°/ 70°F
24.5
kWh Used
per 100 lbs.
90°/ 70°F
Operating Limits
• Ambient Temp Range 45 - 100°F
• Water Temp Range 45 - 90°F
• Water Pressure 10 - 113 PSIG
• Voltage Range 104 - 127V
ELECTRICAL
Amperage
Service
• Panels easily removed and all components accessible for service.
approx.
1”
Printed in the U.S.A.
© HOSHIZAKI AMERICA, INC.
* approximate size; image not to scale
(28mm)
618 Hwy, 74 S., Peachtree City, GA 30269 | TEL 800-438-6087 | FAX 800-345-1325 | www.hoshizakiamerica.com
• Removable/cleanable air filter.
Water Filter
Please refer to water filter specification sheet for recommendations.
7.5A
Voltage
115V/60/1
Storage
Capacity
2.5ft3/75lbs.*
Heat
Rejection
BTU/hr.
3,420
Refrigerant
Charge Amount
10.6oz
Plumbing
• Icemaker Water Supply Line: Minimum 1/4” Nominal ID Copper Water Tubing or Equivalent
• Icemaker Drain Line: Minimum 3/4” Nominal ID Hard Pipe or Equivalent
Clearance
• Allow 6” (15 cm) clearance on right side and 2” (5 cm) on rear. Allow 2” (5 cm) on left side and 0” on top or 5/8” (15 mm) on left side and 2” (5 cm) on top for proper air circulation and ease of maintenance/service.
• Do not place more than 33 lbs. on the top panel.
Hoshizaki reserves the right to change specifications without notice.
Net / Ship
Weight (lbs.)
165 / 198
SELF-CONTAINED SQUARE CUBER
IM-200BAB
WITH BUILT-IN STORAGE BIN
IM-200BAB
05/31/18
Item # 13449
FRONT VIEW
SIDE VIEW
BOTTOM VIEW
© HOSHIZAKI AMERICA, INC.
618 Hwy, 74 S., Peachtree City, GA 30269 | TEL 800-438-6087 | FAX 800-345-1325 | www.hoshizakiamerica.com
REAR VIEW
Printed in the U.S.A.
Loading...