Horizon Fitness E901 User Manual

PREMIER SERIES

ELLIPTICAL USER’S GUIDE

FOR MODEL :

E901

E901_Rev.1.7.indd 1 9/10/08 11:06:37 AM

BEFORE

YOU BEGIN

ASSEMBLYASSEMBLY

INTRODUCTION

IMPORTANT

PRECAUTIONS

ELLIPTICAL

OPERATION

CONDITIONING

GUIDELINES

TROUBLESHOOTING

& MAINTENANCE

LIMITED

WARRANTY

INTRODUCTION

TA B L E OF CONTENTS

Important Precautions

Assembly

Before You Begin

Elliptical Operation

Conditioning Guidelines

Troubleshooting & Maintenance

Limited Warranty

CONTACT INFORMATION

Back Panel

CONGRATULATIONS and THANK YOU for your purchase of this Premier Series elliptical!

Whether your goal is to win races or simply enjoy a fuller, healthier lifestyle, a Premier Series elliptical can help you attain it – adding club-quality performance to your at-home workouts, with the ergonomics and innovative features you need to get stronger and healthier, faster. Because we're committed to designing fitness equipment from the inside out, we use only the highest quality components. It's a commitment we back with one of the strongest frame-to-brake warranty packages in the industry.

You want exercise equipment that offers the most comfort, the best reliability and the highest quality in its class.

Horizon Premier Series ellipticals deliver.

E901_Rev.1.7.indd 2-3 9/10/08 11:06:38 AM

BEFORE

YOU BEGIN

INTRODUCTION

ASSEMBLY

BEFORE

YOU BEGIN

ELLIPTICAL

OPERATION

LIMITED

WARRANTY

TROUBLESHOOTING

& MAINTENANCE

CONDITIONING

GUIDELINES

ASSEMBLY

IMPORTANT

PRECAUTIONS

BEFORE

YOU BEGIN

ASSEMBLY

INTRODUCTION

ELLIPTICAL

OPERATION

CONDITIONING

GUIDELINES

TROUBLESHOOTING

& MAINTENANCE

LIMITED

WARRANTY

SAVE THESE INSTRUCTIONS

Read all instructions before using this elliptical. When using an electrical product, basic precautions should always be followed, including the following: Read all instructions before using this elliptical. It is the responsibility of the owner to ensure that all users of this elliptical are adequately informed of all warnings and precautions. If you have any questions after reading this manual, contact Customer Tech Support at the number listed on the back panel of this manual.

IM PO RTANT PRECAUTIONS

At NO time should pets or children under the age of 12 be closer to the elliptical than 10 feet. At NO time should children under the age of 12 use the elliptical. Children over the age of 12 should not use the elliptical without adult supervision.

It is essential that your elliptical is used only indoors, in a climate controlled room. If your elliptical has been exposed to colder temperatures or high moisture climates, it is strongly recommended that the elliptical is warmed up to room temperature before first time use. Failure to do so may cause premature electronic failure.

To reduce the risk of burns, fire, electrical shock or injury to persons:

WARNING

• If you experience any kind of pain, including, but not limited to chest pains, nausea, dizziness, or shortness of breath, stop exercising immediately and consult your physician before continuing.

• Maintain a comfortable pace. Do not sprint above 80 rpms.

• To maintain balance, it is recommended to keep a grip on the handlebars while exercising, mounting or dismounting the machine.

• Do not wear clothes that might catch on any part of the elliptical.

• Do not turn pedal arms by hand.

• Make sure handlebars are secure before each use.

• Do not insert or drop any object into any opening.

• Unplug elliptical before moving or cleaning it. To clean, wipe surfaces down with soap and slightly damp cloth only; never use solvents. (See MAINTENANCE)

• This elliptical should not be used by persons weighing more than 300 pounds. Failure to comply will void the warranty.

• This elliptical is intended for in-home use only. Do not use this elliptical in any commercial, rental, school or institutional setting. Failure to comply will void the warranty.

• Do not use elliptical in any location that is not temperature controlled, such as but not limited to garages, porches, pool rooms, bathrooms, car ports or outdoors. Failure to comply may void the warranty.

• Use the elliptical only as described in this manual.

• Keep the topside of the foot support clean and dry.

• Disconnect all power before servicing the equipment.

Before proceeding, find your elliptical’s serial number located on the front stabilizer tube and enter it in the space provided below. Also locate the model name which is located on the mast boot.

ENTER YOUR SERIAL NUMBER AND MODEL NAME IN THE BOXES BELOW:

There are several areas during the assembly process of an elliptical that special attention must be paid. It is very important to follow the assembly instructions correctly and to make sure all parts are firmly tightened. If the assembly instructions are not followed correctly, the elliptical could have frame parts that are not tightened and will seem loose and may cause irritating noises. To prevent damage to the elliptical, the assembly instructions must be reviewed and corrective actions should be taken.

ASSEMBLY

SERIAL NUMBER :

MODEL NAME :

* Refer to the SERIAL NUMBER and MODEL NAME when calling for service. * Also enter this serial number on your Warranty Card.

WARNING

IMPORTANT: READ THESE SAFETY INSTRUCTIONS BEFORE USE!

UNPACKING

Unpack the product where you will be using it. Place the product on a level flat surface. It is recommended that you place a protective covering on your floor. During each assembly step, ensure that ALL nuts and bolts are in place and partially threaded in before completely tightening any ONE bolt.

NOTE: A light application of grease may aid in the installation of hardware. Any grease, such as lithium bike grease is recommended.

E901_Rev.1.7.indd 4-5 9/10/08 11:06:40 AM

BEFORE

YOU BEGIN

INTRODUCTION

IMPORTANT

PRECAUTIONS

ASSEMBLY

BEFORE

YOU BEGIN

ELLIPTICAL

OPERATION

LIMITED

WARRANTY

TROUBLESHOOTING

& MAINTENANCE

CONDITIONING

GUIDELINES

BEFORE

YOU BEGIN

ASSEMBLY

INTRODUCTION

IMPORTANT

PRECAUTIONS

ELLIPTICAL

OPERATION

CONDITIONING

GUIDELINES

TROUBLESHOOTING

& MAINTENANCE

LIMITED

WARRANTY

TOOLS INCLUDED PARTS INCLUDED

c Phillips Screw Driver

c 13/15mm Flat Wrench

c 5mm T Wrench

c 1 Console

c 1 Console Mast

c 1 Console Mast Boot

c 1 Front Stabilizer Tube

c 2 Mid Stabilizer Caps

c 2 Upper Handlebars

c 2 Lower Handlebars

c 2 Handlebars Caps

c 2 Handlebar Cover Sets

c 2 Lower Link Arms

c 2 Pedal Arms

CONSOLE

UPPER HANDLEBAR

LOWER HANDLEBAR

MID STABILIZER CAP

LOWER LINK ARM

PEDAL ARM COVER

ELBOW COVER

DISPLAY

CONSOLE MAST

HANDLEBAR CAP

PIVOTING FOOT PAD

MID STABILIZER TUBE

PEDAL ARM

c 2 Pedal Arm Covers

c 2 Roller Wheel Covers

c 2 Elbow Covers

c 2 Pivoting Foot Pads

c 1 Water Bottle Holder

c 5 Hardware Bags

c 3 iPod

Dock Inserts

c 1 Universal MP3 Player Dock Insert

c 1 iPod

Docking Station Rubber Plug

c 1 Audio Adaptor Cable

c 1 Power Adapter

WATER BOTTLE HOLDER

POWER CORD SOCKET

If you have questions or if there are any missing parts, contact Customer Tech Support.

Contact information is located on the back panel of this manual.

For a complete exploded diagram, visit us at www.horizonfitness.com

HANDLEBAR COVER SETS

FRONT STABILIZER TUBE

CONSOLE MAST BOOT

PULSE GRIPS

ROLLER WHEEL COVER

BOLTS (A)

FRONT STABILIZER TUBEMAIN FRAME

MID STABILIZER CAP

MID STABILIZER TUBE

ASSEMBLY STEP 1

Open HARDWARE BAG FOR STEP 1.

Attach the FRONT STABILIZER TUBE to the MAIN FRAME using 2 BOLTS (A).

Insert MID STABILIZER CAPS into the MID STABILIZER TUBE.

BOLT (A) 20 mm Qty: 2

HARDWARE BAG FOR STEP 1 CONTENTS :

E901_Rev.1.7.indd 6-7 9/10/08 11:06:44 AM

BEFORE

YOU BEGIN

INTRODUCTION

IMPORTANT

PRECAUTIONS

ASSEMBLY

BEFORE

YOU BEGIN

ELLIPTICAL

OPERATION

LIMITED

WARRANTY

TROUBLESHOOTING

& MAINTENANCE

CONDITIONING

GUIDELINES

BEFORE

YOU BEGIN

ASSEMBLY

INTRODUCTION

IMPORTANT

PRECAUTIONS

ELLIPTICAL

OPERATION

CONDITIONING

GUIDELINES

TROUBLESHOOTING

& MAINTENANCE

LIMITED

WARRANTY

ASSEMBLY STEP 2

BOLTS (B)

SPRING WASHERS (C)

FLAT WASHERS (D)

CONSOLE MAST BOOT

CONSOLE CABLE MAIN FRAME

BOLTS (B)ARC WASHERS (E)

CONSOLE MAST

BOLT (B) 20 mm Qty: 6

SPRING WASHER (C) 15 mm Qty: 6

FLAT WASHER (D) 20 mm Qty: 4

ARC WASHER (E) 17 mm Qty: 2

angle view

WATER BOTTLE HOLDER

CONSOLE MAST

PRE-ATTACHED SCREW

Open HARDWARE BAG FOR STEP 2.

Slide CONSOLE MAST BOOT onto the bottom of the CONSOLE MAST above bolt holes as shown above.

Carefully pull the CONSOLE CABLE through the CONSOLE MAST using the twist tie located inside the CONSOLE MAST.

Attach the CONSOLE MAST to the MAIN FRAME using 2 BOLTS (B), 2 SPRING WASHERS (C) and 2 FLAT WASHERS (D) in each side and 2 BOLTS (B), 2 SPRING WASHERS (C) and 2 ARC WASHERS (E) in the front of the CONSOLE MAST. Slide CONSOLE MAST BOOT down to cover MAIN FRAME.

DO NOT PINCH WIRES!

Attach the WATER BOTTLE HOLDER to the mast using 2 PRE-ATTACHED SCREWS.

HARDWARE BAG FOR STEP 2 CONTENTS :

ASSEMBLY STEP 3

NOTE: There is NO hardware bag for this step. All hardware is pre-installed.

Attach the PEDAL ARM COVER to the RIGHT PEDAL ARM using PRE-ATTACHED SCREW.

Attach the ROLLER WHEEL COVER to the RIGHT PEDAL ARM using PRE-ATTACHED SCREW.

Repeat on the other side.

PRE-ATTACHED SCREW

PEDAL ARM

PEDAL ARM COVER

PRE-ATTACHED SCREW

ROLLER WHEEL COVER

E901_Rev.1.7.indd 8-9 9/10/08 11:06:50 AM

BEFORE

YOU BEGIN

INTRODUCTION

IMPORTANT

PRECAUTIONS

ASSEMBLY

BEFORE

YOU BEGIN

ELLIPTICAL

OPERATION

LIMITED

WARRANTY

TROUBLESHOOTING

& MAINTENANCE

CONDITIONING

GUIDELINES

BEFORE

YOU BEGIN

ASSEMBLY

INTRODUCTION

IMPORTANT

PRECAUTIONS

ELLIPTICAL

OPERATION

CONDITIONING

GUIDELINES

TROUBLESHOOTING

& MAINTENANCE

LIMITED

WARRANTY

ASSEMBLY STEP 4

PRE-ATTACHED WASHERS

LOWER HANDLEBAR

CONSOLE MAST

PRE-ATTACHED

WASHER & BOLT

NOTE: There is NO hardware bag for this step. All hardware is pre-installed.

Remove PRE-ATTACHED BOLT & WASHER from CONSOLE MAST.

Slide LOWER HANDLEBAR onto CONSOLE MAST and attach by re-inserting PRE-ATTACHED WASHER & BOLT.

Remove PRE-ATTACHED SET SCREWS from right UPPER HANDLEBAR.

Slide UPPER HANDLEBAR onto LOWER HANDLEBAR and secure by reinserting PRE-ATTACHED SET SCREWS.

Remove PRE-ATTACHED SCREWS located on the front and back of the HANDLEBARS.

Attach HANDLEBAR COVERS with PRE-ATTACHED SCREWS.

Repeat on other side.

After handlebars are assembled they will rotate freely – be cautious. Until the machine is fully assembled, do not grab the handlebars for support.

WARNING

PRE-ATTACHED

SCREWS

HANDLEBAR COVERS

UPPER

HANDLEBAR

ASSEMBLY STEP 5

SCREWS (F)

WASHERS (G)

LINK ARM

FOOTPAD

Open HARDWARE BAG FOR STEP 5.

Attach FOOTPAD to LINK ARM using 4 SCREWS (F) and 4 WASHERS (G).

Repeat on other side.

WASHER (G) 18 mm Qty: 8

SCREW (F) 16 mm Qty: 8

HARDWARE BAG FOR STEP 5 CONTENTS :

E901_Rev.1.7.indd 10-11 9/10/08 11:06:57 AM

+ 13 hidden pages