Horizon Fitness B701 User Manual

HYBRID B I K E USER’S G U I D E

FOR MODEL:

B701

PREMIER SERIES

B701_Rev.1.4.indd 1 7/29/08 9:21:14 AM

BEFORE

YOU BEGIN

ASSEMBLYASSEMBLY

INTRODUCTION

IMPORTANT

PRECAUTIONS

BIKE

OPERATION

CONDITIONING

GUIDELINES

TROUBLESHOOTING

& MAINTENANCE

LIMITED

WARRANTY

INTRODUCTION

CONGRATULATIONS and THANK YOU for your purchase of this Premier Series hybrid bike!

Whether your goal is to win races or simply enjoy a fuller, healthier lifestyle, a Premier Series hybrid bike can help you attain it – adding club-quality performance to your at-home workouts, with the ergonomics and innovative features you need to get stronger and healthier, faster. Because we're committed to designing fitness equipment from the inside out, we use only the highest quality components. It's a commitment we back with one of the strongest frame-to-brake warranty packages in the industry.

You want exercise equipment that offers the most comfort, the best reliability and the highest quality in its class.

Premier Series hybrid bikes deliver.

IN TRODUCTION

TA B L E OF CO N T EN T S

Important Precautions

Assembly

Before You Begin

Bike Operation

Conditioning Guidelines

Troubleshooting & Maintenance

Limited Warranty

CONTACT INFORMATION

Back Panel

B701_Rev.1.4.indd 2-3 7/29/08 9:21:15 AM

BEFORE

YOU BEGIN

INTRODUCTION ASSEMBLY

BEFORE

YOU BEGIN

BIKE

OPERATION

LIMITED

WARRANTY

TROUBLESHOOTING

& MAINTENANCE

CONDITIONING

GUIDELINES

ASSEMBLY

IMPORTANT

PRECAUTIONS

BEFORE

YOU BEGIN

ASSEMBLY

INTRODUCTION

BIKE

OPERATION

CONDITIONING

GUIDELINES

TROUBLESHOOTING

& MAINTENANCE

LIMITED

WARRANTY

IM PORTA NT PR EC AUTIONS AS SEMBLY

IMPORTANT: READ THESE SAFETY INSTRUCTIONS BEFORE USE!

There are several areas during the assembly process of a bike that special attention must be paid. It is very important to follow the assembly instructions correctly and to make sure all parts are firmly tightened. If the assembly instructions are not followed correctly, the bike could have frame parts that are not tightened and will seem loose and may cause irritating noises. To prevent damage to the bike, the assembly instructions must be reviewed and corrective actions should be taken.

UNPACKING

Unpack the product where you will be using it. Place the product on a flat level surface. It is recommended that you place a protective covering on your floor. During each assembly step, ensure that ALL nuts and bolts are in place and partially threaded in before completely tightening any ONE bolt.

NOTE: A light application of grease may aid in the installation of hardware. Any grease, such as lithium bike grease is recommended.

Before proceeding, find your bike’s serial number located on the front stabilizer tube and enter it in the space provided below. Also locate the model name which is located on the front stabilizer tube.

ENTER YOUR SERIAL NUMBER AND MODEL NAME IN THE BOxES BELOW:

SERIAL NUMBER :

MODEL NAME:

* Refer to the SERIAL NUMBER and MODEL NAME when calling for service. * Also enter this serial number on your Warranty Card.

SERIAL NUMBER

IMPORTANT

PRECAUTIONS

SAVE THESE INSTRUCTIONS

Read all instructions before using this bike. When using an electrical product, basic precautions should always be followed, including the following: Read all instructions before using this bike. It is the responsibility of the owner to ensure that all users of this bike are adequately informed of all warnings and precautions. If you have any questions after reading this manual, contact Customer Tech Support at the number listed on the back panel of this manual.

At NO time should pets or children under the age of 12 be closer to the bike than 10 feet. At NO time should children under the age of 12 use the bike. Children over the age of 12 should not use the bike without adult supervision.

It is essential that your bike is used only indoors, in a climate controlled room. If your bike has been exposed to colder temperatures or high moisture climates, it is strongly recommended that the bike is warmed up to room temperature before first time use. Failure to do so may cause premature electronic failure.

To reduce the risk of burns, fire, electrical shock or injury to persons:

• If you experience any kind of pain, including, but not limited to chest pains, nausea, dizziness, or shortness of breath, stop exercising immediately and consult your physician before continuing.

• Maintain a comfortable pace.

• To maintain balance, it is recommended to keep a grip on the handlebars while exercising, mounting or dismounting the machine.

• Do not wear clothes that might catch on any part of the bike.

• Do not turn pedals by hand.

• Make sure handlebars are secure before each use.

• Do not insert or drop any object into any opening.

• Unplug bike before moving or cleaning it. To clean, wipe surfaces down with soap and slightly damp cloth only; never use solvents. (See MAINTENANCE)

• This bike should not be used by persons weighing more than 300 pounds. Failure to comply will void the warranty.

• This bike is intended for in-home use only. Do not use this bike in any commercial, rental, school or institutional setting. Failure to comply will void the warranty.

• Do not use the bike in any location that is not temperature controlled, such as, but not limited to garages, porches, pool rooms, bathrooms, car ports or outdoors. Failure to comply may void the warranty.

• Use the bike only as described in this manual.

• Keep the pedals clean and dry.

• Care should be taken when mounting or dismounting the equipment.

• Disconnect all power before servicing the equipment.

B701_Rev.1.4.indd 4-5 7/29/08 9:21:18 AM

BEFORE

YOU BEGIN

INTRODUCTION

IMPORTANT

PRECAUTIONS

ASSEMBLY

BEFORE

YOU BEGIN

BIKE

OPERATION

LIMITED

WARRANTY

TROUBLESHOOTING

& MAINTENANCE

CONDITIONING

GUIDELINES

BEFORE

YOU BEGIN

ASSEMBLY

INTRODUCTION

IMPORTANT

PRECAUTIONS

BIKE

OPERATION

CONDITIONING

GUIDELINES

TROUBLESHOOTING

& MAINTENANCE

LIMITED

WARRANTY

TOOLS INCLUDED PARTS INCLUDED

c Phillips Screwdriver

c 5mm T Wrench

c 6mm T Wrench

c 13/15mm Flat Wrench

c 1 Console c 1 Console Mast c 1 Main Frame c 1 Front Stabilizer Tube

c 1 Rear Stabilizer Tube

c 1 Seat Base

c 1 Seat Back c 2 Pedals c 2 Foot Straps

c 1 Handlebar Set

c 5 Hardware Bags

c 1 Water Bottle Holder c 1 AC Adaptor c 1 Audio Adaptor Cable c 3 iPod Dock Inserts c 1 Universal MP3 Player Dock Insert

If you have questions or if there are any missing parts, contact Customer Tech Support.

Contact information is located on the back panel of this manual.

CONSOLE

WATER BOTTLE HOLDER

MAIN FRAME

FRONT STABILIZER TUBE

UPPER HANDLEBAR

MAIN FRAME

SEAT MECHANISM

SEAT BACK

HANDLEBAR SET

SEAT BASE

SEAT ADJUSTMENT LEVER

REAR STABILIZER TUBE

PEDALS

CONSOLE MAST

iPOD® DOCKING STATION

CRANK ARMS

For a complete exploded diagram, visit us at www.horizonﬁtness.com

ASSEMBLY S T E P 1

料號

004721-00

插件號

Z01

傘頭六角承窩螺絲;M8x1.25Px25L;

物料說明

用量

005145-A

Z02

平墊圈;f8.2xf19.0x2.0t;

004755-00 Z06

傘頭六角承窩螺絲;M8x1.25Px16L;電著;

004382-00

Z07

傘頭十字螺絲;M5x0.8Px15L;電著;切口;

005165-00

Z04

弧型墊圈;f8.2xf18.0x1.5t;

004733-00

Z05

傘頭六角承窩螺絲;M8x1.25Px40L(牙長15L)

MAIN FRAME

FRONT STABILIZER TUBE

REAR STABILIZER TUBE

BOLTS (A)

SPRING WASHERS (B)

WASHERS (C)

BOLTS (A)

WASHERS (C)

SPRING

WASHERS (B)

WASHER (C) 19 mm Qty: 4

BOLT (A) 25 mm Qty: 4

WASHER (C) 19 mm Qty: 4

SPRING WASHER (B) 15 mm Qty: 4

BOLT (A) 25 mm Qty: 4

SPRING WASHER (B) 15 mm Qty: 4

HARDWARE BAG 1 CONTENTS:

ASSEMBLY STEP 1:

Open HARDWARE BAG 1.

Attach the REAR STABILIZER TUBE to the MAIN FRAME using 2 BOLTS (A), 2 SPRING WASHERS (B) and 2 WASHERS (C).

Attach the FRONT STABILIZER TUBE to the MAIN FRAME using 2 BOLTS (A), 2 SPRING WASHERS (B) and 2

WASHERS (C).

NOTE: Make sure to position FRONT STABILIZER TUBE so that wheels are on the front side of the bike, as

shown in illustration.

B701_Rev.1.4.indd 6-7 7/29/08 9:21:23 AM

BEFORE

YOU BEGIN

INTRODUCTION

IMPORTANT

PRECAUTIONS

ASSEMBLY

BEFORE

YOU BEGIN

BIKE

OPERATION

LIMITED

WARRANTY

TROUBLESHOOTING

& MAINTENANCE

CONDITIONING

GUIDELINES

BEFORE

YOU BEGIN

ASSEMBLY

INTRODUCTION

IMPORTANT

PRECAUTIONS

BIKE

OPERATION

CONDITIONING

GUIDELINES

TROUBLESHOOTING

& MAINTENANCE

LIMITED

WARRANTY

ASSEMBLY S T E P 3

料號

004721-00

插件號

Z01

005145-A

Z02

004755-00 Z06

004382-00

Z07

005165-00

Z04

004733-00

Z05

BOLTS (D)

MAIN FRAME

SEAT MECHANISM

WASHERS (C)

SPRING WASHERS (B)

HANDLEBAR SET

Open HARDWARE BAG 2.

Attach the HANDLEBAR SET onto the SEAT MECHANISM using 4 BOLTS (D), 4 SPRING WASHERS (B) and 4

WASHERS (C).

NOTE: Start by attaching top two bolts first, this will make assembly easier.

料號

004721-00

插件號

Z01

傘頭六角承窩螺絲;M8x1.25Px25L;

物料說明

用量

005145-A

Z02

平墊圈;f8.2xf19.0x2.0t;

004755-00 Z06

傘頭六角承窩螺絲;M8x1.25Px16L;電著;

004382-00

Z07

傘頭十字螺絲;M5x0.8Px15L;電著;切口;

005165-00

Z04

弧型墊圈;f8.2xf18.0x1.5t;

004733-00

Z05

傘頭六角承窩螺絲;M8x1.25Px40L(牙長15L)

MAIN FRAME

RIGHT CRANK ARM

LEFT PEDAL

LEFT CRANK ARM

RIGHT PEDAL

ASSEMBLY S T E P 2

NOTE: There is no hardware bag for this step.

NOTE: The PEDALS will have stickers specifying which is left and right.

Match LEFT PEDAL with left FOOT STRAP.

With “L” on the strap facing outwards, insert FOOT STRAP into the loops on both sides of the pedal as shown above.

Repeat with the RIGHT PEDAL and right FOOT STRAP.

Attach the RIGHT PEDAL onto the RIGHT CRANK ARM, tightening it CLOCKWISE with the provided

13mm/15mm FLAT WRENCH.

NOTE: The LEFT CRANK ARM is reverse threaded so it is very important that it is tightened COUNTER- CLOCKWISE. Tightening it the opposite way can damage the pedal or the CRANK ARM or both.

Attach the LEFT PEDAL onto the LEFT CRANK ARM, tightening it COUNTER-CLOCKWISE with the provided 13mm/15mm FLAT WRENCH.

ASSEMBLY STEP 2: ASSEMBLY STEP 3:

WASHER (C) 19 mm Qty: 4

BOLT (D) 16 mm Qty: 4

WASHER (C) 19 mm Qty: 4

SPRING WASHER (B) 15 mm Qty: 4

BOLT (D) 16 mm Qty: 4

SPRING WASHER (B) 15 mm Qty: 4

HARDWARE BAG 2 CONTENTS:

LEFT FOOT STRAP

LEFT PEDAL

ASSEMBLY STEP 2-B:

B701_Rev.1.4.indd 8-9 7/29/08 9:21:27 AM

+ 10 hidden pages