ilOOVER
Owner’s
Manual
CVm*.
ENGLISH + pp. 1-13
ESPAfiOL + pig. 14-21
The Easy to Use
Deep Cleaner
with
Review this manual before operating deep
automatic
tool
conversion
FRANGAlS + p.
22-29
cleaner
Ultra Models
These models are included in this manual
TM Deep Cleaner cleans carpet fibers
Plus Models
hot tap water and cleaning solution.
Deluxe Models
Fill in and Retain
This HOOVER deep cleaner is
designed for deep cleaning carpet,
rugs, carpeted stairs and upholstery.
The model and serial numbers are
located on the data label on the back
of the handle.
For your personal records, please
enter the COMPLETE model and serial
numbers in the spaces provided and
retain this information.
Your deep cleaner is model
and has serial number
It is suggested that you attach your
sales receipt to this owner s manual.
Verification of date of purchase may
be required for warranty service of
your Hoover product.
index
Important safeguards
Unpacking deep cleaner.
Assembling deep cleaner
Deep cleaner description
General operation
Filling the clean solution tank. 7-8
Emptying the recovery tank . . 8-9
Agitator speed selector
Brush Indicator
How to use
Before you begin
After cleaning
Cleaning carpet
Picking up spills
Cleaning bare floors
Usingthetools
Cleaning carpeted stairs . . 11-12
Cleaning upholstery
Ifyouhaveaproblem
Lubrication
Service
Storage
Warranty
.................
....................
....................
...................
..........
.......
.....
.......
...........
.......
.............
...........
............
............
............
......lo-11
............
.......
........
2
.3
.4-5
.6
.6-9
7
.7
.9
9-10
10
10
.11
12
.13
.12
.12
.12
.13
I
When using an electrical appliance, always follow basic
precaution, including the following:
READ ALL INSTRUCTIONS BEFORE USING APPLIANCE.
To reduce the risk of fire, electric
~ ------
----
WARNING: shock,orinjury:
.
Use indoors only.
.
Use
Only on surfaces moistened by the cleaning process or small spills. Do
not immerse product.
.
Connect
.
Do not clean over floor electrical outlets.
.
Do not use without tanks in place.
.
Use extra care when cleaning on stairs. Do not place deep cleaner on stairs.
.
Use deep cleaner only for its intended use as described in the instructions.
.
Use only attachments recommended by The Hoover Company; others may
cause hazards.
.
The use of an extension cord Is not recommended. If an extension cord is
absolutely necessary, use at least a 16 gauge 3-wire cord which has a 3-prong
grounding type plug and a
.
Unplug deep cleaner when not in use.Turn off all controls before unplugging.
.
Always disconnect cord from electrical outlet before servicing the deep cleaner.
.
Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.
.
Never handle plug or appliance with wet hands.
.
Do not pull or carry by cord, use cord as a handle, close door on cord or pull
cord around sharp edges or corners. Do not run appliance over cord. Keep
cord away from heated surfaces.
.
Do not use with damaged cord or plug. If appliance Is not working as it should,
has been dropped, damaged, left outdoors, or dropped Into water, take it to a
Hoover Factory Service Center or Authorized Hoover Warranty Service Dealer.
.
Close supervision is necessary when any appliance is used by or near
children. Do not allow deep cleaner to be used as a toy or to run unattended at
any time.
.
Do not point tools toward people or pets.
.
Use only commercially available floor cleaners Intended for machine
application. Do not use any type of wax with deep cleaner.
.
To assist In reducing drying time, be certain the area Is well ventilated when
using detergents and other cleaners with this machine.
.
Keep detergents and other cleaners out of children’s reach.
.
Do not use to pick up flammable or combustible liquids such as gasoline or
use In areas where they may be present.
.
Do not pick up chlorine bleach, drain cleaner, gasoline or any other toxic
material with this appliance.
.
Do not pick up anything that is burning or smoking, such as cigarettes,
matches, or hot ashes.
.
Avoid picking up hard, sharp objects with the deep cleaner. They may damage
the machine.
.
Keep hair, loose clothing, fingers, feet and all parts of body away from
openlngs and moving parts.
.
Do not put any object Into openings. Do not use with any opening blocked;
keep free of dust, lint, hair, and anything that may reduce air flow.
.
To help prevent matting and resoiling, avoid contact with carpets until they are
dry. Keep children and pets away from carpets until they are
.
Store in a dry place. Do not expose machine to freezing
to a properly grounded outlet only. See “Grounding Instructions”.
3-pole
receptacle that accepts the machine plug.
COmPletelY
temPeratUreS.
dry.
Save
@
@@
0 1993,1996,1997 The Hoover Company
www.hoovercompany.com
2
,.
Grounding
Instructions
I
1
a
0
0
I
1
8
0
r-l
This
appliance
should
malfunction or
grounding provides a
tance for electrical current to reduce
risk of electric
equipped
ment-grounding conductor
grounding plug
plugged
that is properly installed
accordance
ordinances.
must
be grounded. If it
shock. This
with a cord
(A). The
into an
appropriate outlet
with
all local codes
breakdown,
path of
least resis-
appliance
having an equip-
(C) and
plug
must be
(B)
and
grounded
and
the
is
DANGER-
Improper connection of the equipment-
grounding conductor can result in
risk of electric
ified electrician or service person if
are in
doubt as to whether
properly grounded. Do
plug provided
will
not
fit the
installed by a qualified electrician.
appliance is for
volt circuit
in
that
looks
sketch (A).
and has
like
shock.
Check with a qual-
with the
outlet,
the
appliance - if
have a proper outlet
use on
a
a grounding
plug illustrated
the
outlet
not
modify
nominal 120
plug
in
the
you
the
This
F
A
temporary adapter
connect this plug to a 2-pole receptacle
(E)
if a properly grounded outlet is
available.
be used
outlet
is
it
electrician.
lug, or the
adapter
nent ground (G) such as a
grounded outlet box
the adapter is
place by a
Canada, the
is not
Electrical
The
temporary adapter should
only
(B) can be
permitted by the Canadian
until a
The
like
must
be connected to a
metal screw.
use of a
Code.
(D)
properly grounded
installed by a qualified
green colored rigid
(F)
extending
cover. Whenever
used, it
must be held
temporary adapter
II
a
G
I I
E
0
Fl
may be used
not
from
the
perma-,
properly
NOTE:
In
to
ear,
in
A
Unpack deep cleaner from the car-
q
ton and identify the parts shown.
Remove and dispose of the packing.
A. Deep cleaner
B. Upper handle OR
Upper handle for stair/upholstery nozzle storage*
OR Upper handle with powered hand tool**
c. Bolts (2)
D. Nuts (3 - one extra included)
E. Carpet/Upholstery Detergent
F. Bare Floor Cleaner
G.
PreCleaner
H. Bare floor attachment
(some models)
B
Contained in carton with hose:
I.
Hose
J. Stair/upholstery nozzle OR car cleaning tool*
(positioned on rack); Stair/upholstery nozzle not
positioned on rack*
K. Hose rack and screw (taped on rack under nozzle)
L. Clip for hose
*Included with Plus models
**Included with Ultra models
3
The
assembled cleaner will
drawing (Ultra model
shown).
look
like this
Attach upper handle
q
Remove
tank) from
clean
deep
solution tank
cleaner.
(upper
With cord hook (A) to back of deep
cleaner, push upper handle down onto
EII
lower handle. Push
front of handle. If bolts will not go
through hole easily handle is not pushed
completely down.
bolts
into holes on
Place nuts in
q
’
back of handle.
place while tightening each bolt securely
with
a Phillips screw
Only
two nuts are
The
extra
been
provided
Press
El
handle. Pull cord
recessed areas
nut
is
not
for
cord
into cord
Hold
each
driver.
needed on this
required but
your convenience.
clip on back
tight.
on
nut in
model.
has
B
/
I
When
la
upper handle to snap trigger
place.
of
Attach hose clip
’
0
handle sections
ly
together,
Push
side of handle.
squeeze trigger
tab on side of
are complete
(6) on
rod In
clip into hole on
.
Replace clean
EI
tank) by positioning
Press on tank
tank
into
place.
Pivot
q
*
place.
clip
hole at
back of handle to
handle to snap
and push other
I
solution tank
bottom
tab
(upper
first.
top of
into
lock into
4
Attach hose rack
, Remove tool and
q
rack.
Insert projections on
back of
cleaner.
taped screw
rack into
slots
from
on
Slide rack
q
screw at
Phillips screwdriver.
down into
(D) and
place. Insert
tighten
with a
Storing hose & tools
Store hose on
ing hose in front
q
rack by first position-
section of clip.
Then
q
nectar
continue wrapping
shown
snapping
into
clip.
For Plus* or
Ultra** models
The
powered
. in
a plastic
q
Remove
by first opening
the
hand
bag
for protection.
bag before using
tool door.
hose as
end of hose
tool** is shipped
the
con-
tool
, Position tool in
q
cleaner
shown
at
arrow.
To remove
q
and
outward.
To
reposition the
dure.
To store
open
and
remove,
stair/upholstery nozzle*
tool door,
fit it
securely
reverse this procedure.
holder at base
and
snap it
tool**
tool,
place nozzle in bracket
into
place
(A),
pull it
down
reverse this proce-
into
position.
To
(B),
of
as
Slide bare floor attachment
q
holder as
shown.
into
How to reattach tool
cover
: The tool
q
to
snap free if it is pushed
To reattach,
slots on sides of
Push cover down to secure in place.
cover is designed
break-away feature which allows
align hinges of cover
tool
storage
with
open too far.
with
area.
a
it
The
assembled deep cleaner will
18
5
16
look like the
drawing.
.
q
1. Hand grip
2. Solution trigger: press to
release clean solution.
3.
Cord clip: place cord in
to keep it out of the way
when using
4. Hose
5. Hose holders: wrap
around
6.
Cord hooks: wrap cord
around
The
top
right or left for quick
easy cord release.
7. Stair/upholstery nozzle* OR
Powered hand tool**
8. Carrying handle
9. Clean solution tank handle
10. Clean solution tank cap/
measuring cup
11. Clean solution tank: holds
cleaning
12. Recovery tank handle:
raise handle to unlock
for
removal;
ward to
tion.
cleaner
holders for storage.
hooks
for storage.
hook can be
solution.
lower handle
lock tank into
clip
hose
rotated
and
tank
for
posi-
13. Recovery tank:
solution.
14. Hood
15. Agitator speed selector:
slide selector to set
speed on
16. Brush Indicator: spins
when
brushes
17. Nozzle.
18. Cleaning mode indicator:
choose either floor or tools
19. ON/OFF pedal
20. Handle release pedal: step
on
pedal to lower handle
operating
21. Stair/upholstery nozzle OR
Car cleaning tool*
22. Bare floor attachment
*Included with Plus models
**Included with Ultra models
This deep cleaner is intended
for household use.
holds dirty
brush
HI, LO, or OFF.
are
rotating.
(floor)
position;
to
Operate deep cleaner only at voltage
specified on data plate on back of
cleaner. Plug deep cleaner Into a properly grounded outlet.
ON/OFF pedal
&
Handle release pedal
, Step on
q
turn
deep cleaner
Step on
operating
into a single position but “floats” to allow
convenient
6
pedal
cleaner
pedal
position. Handle
operation.
(A) to turn
on. Step on
off.
(B) to lower
deep
pedal again
handle
does
to
not
to
lock
Cleaning mode indicator
Indicator will
q
next to
in
the operating position for cleaning
carpet
rugs and bare floors.
Indicator will
to TOOL (D) when
upright position for tool use on stairs
upholstery
Deep
cleaner automatically divert suc-
tion from FLOOR toTOOL when
dle is raised
upright
position.
show a
FLOOR (C) when
show a
etc.
from the
green window
green window next
handle is in
operating to
handle
the
han-
the
To transport
is
To move
room to room put
q
and
locked position tilt deep cleaner
back on wheels
your deep cleaner
handle in upright
and push
forward.
from
The
q
upper clean
shown.
deep cleaner may also be lift-
ed
by placing a
solution
hand
under the
tank handle
as
When the recovery tank (lower tank) is
El
’
full the automatic shutoff mechanism
will shut off the deep cleaner suction
tion will be noticeably reduced).
At
that time
the top of the
deep cleaner will no longer pick up dirty
solution and the
become noticeably higher in pitch.
When this happens turn deep cleaner
off and empty recovery tank before
continuing
Check clean solution
need to be
the red
float disk will rise
recovery
motor sound will
use.
tank also; it
refilled.
tank
lid
(suc-
to
(E). The
may
Agitator Speed selector
Your ‘SteamVac’
three agitator
q
HI - for
bare
LO -
bare
OFF - for cleaning carpets
floors
(Such as when
See
Slide selector
ting before cleaning.
normal
floors
for
gentle cleaning of carpets
floors
when
brushing is
page
10.)
deep cleaner
brush
settings.
cleaning of carpet
not
picking up liquid spills.
button to the
and
and bare
desired.
desired
has
and
set-
Brush indicator
. The brush
a
when the
ON and the brushes are rotating.
If the indicator does not spin and the
pattern is visible (G) when the deep
cleaner is turned ON, the brushes are
not rotating.
There are
may
not be rotating:
1. Brush
previous
2. Handle in
“Cleaning
3. Brush
indicator will spin
deep cleaner is turned
three
reasons
speed selector set on
section).
upright position (see
mode
indicator,” p.
indicator screen
why
dirty.
the
(F)
brushes
OFF
6).
(see
To
clean
q
er off and disconnect from electrical
outlet.
Remove
with a
damp
position.
screen (H), turn deep clean-
clear cover
cloth. Snap
and
wipe
cover back
off
screen
into
The tanks
Clean solution tank
(upper tank)
The
clean
ing solution
the
surface to be cleaned.
solution tank
that is to be dispersed
holds
the
How to fill
Disconnect deep cleaner from
electrical outlet.
: Place
deep cleaner handle in
upright,
q
To remove tank, press down on
and pull forward.
Carry
locked position.
handle
tank to a sink.
Continued
clean-
onto
the
+
7
Rotate tank
.
q
and
lift up to
CAUTION: Detergents contain
Anionic and
Avoid contact with eyes and skin. In
case of contact with eyes, flush with
cold water for 15 minutes. In case of
contact with skin, wash with water. If
Irritation persists, call a physician.
For Medical Information (U.S.) call
l-800-752-7889.
cap counterclockwise
remove
cap.
Nonionic
Surfactants.
Using cap, measure detergent following
the
chart
below.
For carpet, carpeted stairs and uphol-
stery:
Fill
cap to
CarpetiUpholstery
For bare floors:
Fill cap to
Bare Floor Cleaner
Do not use Bare Floor Cleaner on carpet or
upholstery.
with your ‘SteamVac’ deep cleaner.
Turn
cap
(A)
as a
measuring
upside
For heavy traffic areas:
Pre-treat with HOOVER
If you do not have access to the
of HOOVER Detergent (use 2 capfuls or 10 ounces per 1 gallon tank).
cup.
down to
serve
PreCleaner
NOTE: Use only HOOVER detergents.
They
with your
PreCleaner
fill line (5 ounces) with
fill line (5
Do
are specially formulated
‘SteamVac’
Spray.
Detergent
ounces) with HOOVER
not use any type of wax
deep
Spray, double the amount
HOOVER
for
cleaner.
use
Replace
wise until it locks In place. Cap
q
must be locked In place for proper
performance and to prevent leaking.
cap.
Rotate cap clock-
Pour detergent into tank. Fill tank
to fill line (B) (1 gallon) with hot
q
tap water.
To
assure proper performance, use only
HOOVER cleaning detergent.
, Position bottom of tank into unit
and
q
tank into
press on tank handle to snap
place.
If
rubber
become dislodged, reposition
with
uneven
shown.
ring (C) on
side against ledge
cap
has
it
(D) as
Recovery tank
(lower tank)
The
recovery tank holds the dirty
tion
that is picked up
When
the recovery tank is
matic shut-off will engage (see page
and the tank must be emptied.
from the
solu-
carpet.
full, the auto-
How to empty
Turn deep cleaner off and disconnect
from electrical outlet.
To
prevent possible leaking,
clean solution
down on
ward; set
on furniture).
Step on
and lower handle
floor.
tank (Fig.28)
tank handle
tank
aside (do not set tank
handle release pedal
until it rests on the
by pressing
and
pulling
remove
for-
(Fig. 20)
7)
8
Raise
q
base of deep
deep cleaner and carry it to a sink
drain.
handle to carrying position
(straight
up) to
unlock tank
cleaner. Lift tank from
from
or
, To
remove tank
q
completely toward back of tank
and
lift
off
lid.
Empty the
tank
lid, lower
and
reposition
handle
the
lid.
For full suction, it is important that
the recovery tank lid is properly
secured before cleaning.
Raise
tank handle to carrying position
place it
dle completely forward to lock tank
place (see
Raise
position
solution tank.
into
base of
Fig. 35).
handle of deep cleaner to upright
and
reposition upper clean
cleaner. Move han-
to
into
Before you begin
cleaning
a. Vacuum thoroughly -
a
vacuum cleaner
best
results. Vacuum
vacuum cleaner
attachments. Use a
into tufts and
‘SteamVac’ deep cleaner as a dry vac-
uum cleaner.
b. For upholstery, check cleaning
code -
deep cleaner only if
ric is
or “S/w”
clean). Do not clean fabric marked
(“solvent/dry” clean only). If your
upholstery
professional assistance.
c.Test
and water according to the instructions
under “Fill clean solution tank” on pages 7
Use
marked with a “W” (for
(for
for colorfastness -
with
folds. Do not use the
your
HOOVER ‘SteamVac’
“solvent/dry” or “wet”
does not have a code, seek
For
carpet,
with an
agitator for
upholstery
cleaning tool
crevice
tool to reach
the
upholstery fab-
“wet” clean)
Mix
detergent
use
with a
“S”
After cleaning
a. Allow carpet or upholstery to
help prevent matting
carpet,
from
it is necessary to walk on damp car-
pet,
traffic
If
carpet is
foil pads
slides or
carpet.
b. If desired,
Rinsing is not necessary for cleaning,
but it may Improve the surface’s
ance
If rinsing is
over-wet the
keep
children
surface
place towels or white cloths on
furniture
until it
areas.
must be
dry, use
under
wood
the
after it is dry.
desired, be careful
carpet or
and
and
is completely dry. If
replaced before
plastic or aluminum
legs of furniture so metal
finishes will
carpet may be rinsed.
upholstery.
dry. To
resoiling the
pets away
not
stain
appear-
not to
the
the
the
and 8. Wet
solution. In
the surface with the dampened cloth. Wait ten
minutes and check for color removal or bleed
with white paper towel or cloth. If surface has
more than one color, check all colors.
d. When cleaning entire floor, move
furniture out of area to be cleaned
(may
areas
too
or
wax paper
vent
Pin up
e. Pretreat spots and heavy traffic
areas with HOOVER@ PreCleaner*-
Test
spraying it on a hidden
minutes
or
cloth.
If no color change is visible, spray
PreCleaner onto spots and traffic areas. Wait
at least ten minutes. Use your ‘SteamVac’
deep cleaner to pick up PreCleaner and
spot. Repeat until spot is removed; carefuliy
scrub with a household scrub brush if necessary.
Allow time for carpet or upholstery to
dry completely between cleaning and
rinsing. To
dure for cleaning only
water
clean
c. Empty tanks, rinse with
and
cap
a
white
a
small, hidden area, gently rub
not be
necessary if only
are to be
heavy to
wood
PreCleaner
let air
and
move,
finishes
furniture skirts
and
blot
rinse,
with no
detergent in
solution tank.
dry. Rinse the solution
recovery
absorbent
cleaned).
place aluminum foil
under legs. This
from
for
colorfastness by first
with
follow
tank
cloth with the
For
staining carpet.
and
draperies.
area;
white paper towels
the
same proce-
using hot
the
clear water
lid
and let
high
traffic
furniture
will
pre-
wait
ten
tap
upper
tank
air
dry.
Do not saturate
PreCleaner.
If you do not have access to the
PreCleaner Spray, double the amount
of HOOVER Detergent (use 2 capfuls
or 10 oz. per 1 gallon) in the clean
solution tank.
*Available at additional cost if not included
with your model. No cleaning solution
removes all stains from all carpets. Stain
removal varies with the type of spill, time
elapsed before removal, carpet material,
and carpet type.
f.To prevent staining,
minum foil to protect wood or metal surfaces from possible water spray.
g. To avoid wetting and possible damage
to wood floors underneath area rugs/carpet,
either move area rugs/ carpet to a
wood bare floor surface
material (e.g. plastic) underneath them
before cleaning.
See pages 1 O-l 4 for instructions on various
cleaning tasks.
d.
Remove
tank
q
water.
Note: If
cleaning, it is easier to replace if
ter is
wet.
e. If
desired, vacuum thoroughly after
carpet
has
help reduce
deep cleaner’s
carpet or upholstery
use
or
debris
filter
and rinse with
the
filter
must be removed for
completely dried.
any
shading
brushes.
with
plastic or
place waterproof
from
left by the
alu-
recovery
clean
the
This
will
non-
fil-
To clean nozzle
If lint or other
nozzle, do not attempt to remove
nozzle cover.
Pour one to two
non-carpeted
onto a wood floor.
Pick up
cleaner. Repeat as
debris is flushed
debris becomes lodged
cups of clear water on
floor.
Do not pour water
water
with
your
‘SteamVac’
necessary
out of nozzle.
Continued +
in
a
deep
until
9
To
clean the outside of
wipe
off
dirt with a cloth dampened
warm water
use solvent or petroleum based products to clean the machine.
Read “Before you begin cleaning”
instructions on page 9.
Fill
clean
HOOVER
according to instructions on pages
and 8.
Move speed selector to LO for gentle
cleaning or Hi for normal cleaning.
Dry hands and
grounded outlet.
Do not clean over floor electrical outlets.
To
avoid walking on damp carpet, start
at the end of the room
door or path to
emptied and
Step on
handle to operating position; turn deep
cleaner
and
solution tank
Carpet/Upholstery Detergent
plug
sink
filled .
handle release pedal and lower
ON.
the
machine,
mild detergent. Do not
(upper
cord into a
farthest
where
tanks will be
in
tank)
with
7
properly
from
the
Squeeze trigger to release cleaning
:
q
solution
cleaner forward (equals
Continue to squeeze trigger and slowly
pull deep cleaner back toward you (second
wet
slowly
area just sprayed
stroke). Then
backtoward
ger (dry
Overlap
and
slowly
stroke).
push
Release
deep cleaner forward over
slowly pull deep cleaner
you without squeezing
stroke).
strokes
by 1
with
inch to
push
one
trigger
solution
deep
wet
stroke).
and
(dry
help pre-
trig-
vent streaking.
Keep
nozzle
ward
For
heavily soiled
avoid saturating carpet, do not use
more than 4 wet strokes over one
area. Always end with dry strokes.
It is
best to alternate wet and dry
strokes as
For
best cleaning results
faster drying of carpet,
dry
strokes.
until
little water is
through the recovery tank lid.)
Empty
sound
there is a
“Automatic
When
cleaning” instructions on pages
flat on
floor
for both for-
and
reverse
described above.
recovery tank
becomes higher pitched
loss in
finished cleaning, follow “After
strokes.
areas, repeat.
(Continue using dry strokes
suction (see
shut-off”,
end with more
visible
when
page
and to
passing
the
7)
To
aid
motor
and
9-10.
in
Your HOOVER SteamVac
may
also
be
used to
uid spills (1 gallon or less, never to
exceed
upholstery, or bare floors.
For
ately by placing the stair/upholstery
nozzle just above
up any
the
upholstery
brushes turned
pull the
initially with suction only. Repeat with spray
and suction.
When picking up spills on bare floors,
q
place attachment on
Make sure arrow on end of
points in the
IO
l/4
inch in depth) on carpet,
best
results,
pick up
residue on top of
spill
remains,
nozzle very slowly over
With foam
.
the
netting) in
place either
nozzle or
Off in front of the
strip
direction as
deep cleaner
pick up small
spills
immedi-
the
spill
and
suction
the
carpet.
floor nozzle
(A)
position as shown,
front of nozzle (B).
the
the
(located
attachment
shown.
liq-
If
stair/
wirh
spill,
spill
under
use only the floor nozzle with the bare
floor attachment in place and
selector in
prevent spreading the spill).
If a spot is left, the stair/upholstery nozzle is
generally more effective for removing it.
Although no cleaning solution can completely remove all spots, they can be treated
by
the manufacturer of the carpet, upholstery,
or bare floor surface being cleaned.
Do not use the SteamVac deep cleaner
to pick up flammable or combustible
uids or chemicals.
When finished, follow “After cleaning”
instructions on pages
, , Push attachment against nozzle while
q
both ends snap into place.
(Note: Some force may be required to
rotate and snap attachment into place.)
the OFF position
following the instructions provided
410.
rotating attachment downward until
speed
(this
will help
by
liq-
How to attach bare floor
attachment
Disconnect deep cleaner from
cal outlet.
To
prevent possible
clean solution tank
before positioning bare attachment.
Refer to Fig. 28 to remove
tion tank. Set tank
tank on furniture).
Refer to Fig. 35 to
tank.
With
handle in upright position, tilt
cleaner back so that handle
the floor.
Return
deep cleaner to upright
Lower
handle
tank.
Raise
handle to upright position
reposition clean solution
leaking, remove
and
recovery tank
aside (do
remove recovery
and
replace recovery
tank.
electri-
clean solu-
not set
rests on
position.
and
To clean floor
Read Before you begin cleaning
instructions on page 9.
Do not use the SteamVac deep cleaner on hardwood floors.
Fill
clean
Bare Floor
tions on pages 7
Do not use any type of wax with your
SteamVac deep cleaner.
Move speed selector to the Lo or HI
position for scrubbing or OFF if
scrubbing is not desired.
solution tank with HOOVER
Cleaner according to instruc-
and 8.
c
Dry
hands
and
plug deep cleaner into
a properly grounded outlet.
Step on
handle release pedal and lower
handle to operating position;
cleaner
To
move
ward
To pfck up
and
area
persed.
strokes.
Empty
sound
there is
“Automatic
When
cleaning” instructions on pages
Remove
rinse in
plastic screen or foam from attachment.
ON.
release
solution,
deep cleaner forward
over area to be cleaned.
dirty
slowly
move
where solution has
Use both
recovery
becomes higher pitched and
a
loss in
finished cleaning, follow “After
attachment
clear
press trigger. Slowly
solution,
deep cleaner over
forward
tank when
suction (see
shut-off”,
page
from
water.
Do not remove
turn
deep
and
back-
release trigger
just
been
dis-
and
reverse
the
motor
7)
9-10.
nozzle and
The
powered
has
rotating brushes
action on small carpet
stairs and
The
stair/upholstery nozzle
brush
to help provide
action
removal.
The
car cleaning
be
used
vehicles.
hand tool
upholstery.
some
spots may
for carpet
(Ultra models)
for
extra scrubbing
areas,
the
scrubbing
need for
tool (Plus
and
upholstery
carpeted
has a
built-in
models) can
in
How to attach tool
Disconnect deep cleaner from electrical outlet.
Place
handle in upright position and
remove hose from rack.
,
Connect powered
stair/upholstery
q
cleaning
sliding it
locks
Using
up on
shown.
Follow the
for the
onto
connector
it
securely.
your
thumb,
the
latch (D) to
instructions on pages
appropriate cleaning
tool (B) to end
hand tool (A) or
nozzle or
push forward and
remove tool as
until
car
of
hose
the tab
11-12
task.
by
(C)
After using tool
1. Follow
ing” on page
A
q
deep cleaner ON
with the tool.
steps a
2. Rinse tool and hose
with a
and b for
9.
small
amount of water. Turn
and
pickup the water
“After clean-
by
filling
sink
3. Drain hose
1
q
cleaner ON and holding
hose up
press trigger.
4.
cal outlet.
5. Drain
hose)
and
6. Proceed with
“After cleaning” on page
Turn
q
one inch
forward while pressing
(equals
Position tool against the riser and slightly
press it into carpet pile. Press the trigger
and pull the tool slowly over the carpet
(second wet stroke). Release trigger at end
of stroke.
for several seconds. Do
Disconnect deep cleaner
solution tube (located inside
by pointing
pressing trigger.
deep cleaner
Pre-spray
’
’ holding
above the carpet
one
by turning deep
end of hose in
steps c, d,
the
the tool (A) or(B)
wet
stroke).
9.
ON.
carpeted stair by
the
end
of
not
from
electri-
sink
and e,
for
about
and push it
trigger
Read “Before you begin cleaning”
Instructions on page 9.
Place
handle in upright position.
Agitator brushes will not rotate while
handle Is in upright position.
Fill
clean
solution
tank
with HOOVER
Carpet/Upholstery Detergent according
to
instructions on pages 7 and 8. Attach
tool to end of hose.
Hose length
be
placed at
clean upper half of stairway and at bot-
tom of
To prevent machine from falling, use
extra
Do not place deep cleaner on stairs.
Do not point tools toward people or
pets. Dry
into a
may require that machine
the
top of the stairs
stairs to clean
cautipn
properly grounded outlet.
when cleaning on stairs.
hands and
lower half.
plug deep cleaner
Continued +
to
11
Lift tool, and
Pull tool
pressing trigger (dry
It is
best to alternate wet
as
described above.
strokes to
Overlap
vent streaking.
To avoid saturating carpet, do not use
more than 4 wet strokes over any one
area. Always end with dry strokes.
If
additional cleaning is
until
using
Empty
sound
there is a loss in
shut-off”,
strokes
the carpet is completely dry
the
recovery
becomes higher pitched
page
position it against
slowly over carpet without
stroke).
and
aid in faster drying of carpet.
tool again.
End with more
by
l/2 inch to
necessary,
tank when the motor
suction (see “Automatic
7)
dry
strokes
dry
help pre-
wait
before
and
riser.
When
finished cleaning, follow “After
cleaning”
“After
Read “Before you begin cleaning”
Instructions on page 9.
Be sure to
your
‘SteamVac’
upholstery marked “w” or “W/S’.
Place handle in upright position.
Agitator brushes will not rotate while
handle Is In upright position.
Fill
Carpet/Upholstery Detergent according
to
instructions on pages 7 and 8. Attach
tool to end of hose.
Do not point tools toward people or
pets.
Dry
properly grounded outlet.
using tool”
upholstery.
clean
hands and
instructions on
instructions on page
check the cleaning code
Use your HOOVER
deep cleaner only on
solution
plug deep cleaner
page 9
tank with
and
HOOVER
on
into a
11.
Turn
deep cleaner
, .
Gently press
the
q
slowly pull
Overlap
vent streaking.
Make
the trigger to remove
To
tool
press the
Vacuum up the
without pressing
fabric.
the
strokes
additional
clean in corners or creases, lift the
one-half
solution
on.
the tool (A)
Press
the trigger
nozzle over the fabric.
by
l/2 inch to
strokes
inch from the
trigger.
solution
the
trigger.
or
help pre-
without pressing
more moisture.
fabric
with the tool
(B) onto
and
and
For
heavily soiled
1
q
necessary to repeat
process.
the
Make no more than 2 passes with the
solution over any one area to prevent
over-wetting and damage to fabric.
If
additional cleaning is
until the
before using the tool
Empty
sound
there is a loss in suction (see
shut-off”,
When
cleaning”
“After using tool” instructions on
12
Make
crisscrossing
original
pattern;
upholstery is completely dry
recovery
becomes higher pitched and
page
finished
cleaning, follow
instructions on
areas, it
overlap
again.
tank when the motor
7).
may
the
cleaning
strokes to
each pass.
necessary,
“Automatic
“After
page 9
page
and
be
wait
11.
Storage
Before
storing:
l
Empty
solution
thoroughly
l Replace empty solution tank
turn
deep cleaner
trigger
and push
ward
and
expel any
deep cleaner’s system.
deep cleaner on
l
Empty
recovery tank and rinse
thoroughly with clean
Allow brushes and underside of deep
cleaner to air dry thoroughly before
storing deep cleaner on a carpeted or
wood surface.
Do not store deep cleaner with a full
solution tank In place.
tank and
with
clean
deep cleaner
back several times
solution
rinse
water.
ON.
Squeeze
remaining in the
(Do not use
wood
floors.)
water.
and
for-
to
Lubrication
The motor Is
which contain sufficient lubrication for
the
life of the
cant could cause damage. Do not add
lubricant to motor bearings.
equipped
motor. The
with
bearings
addition of lubri-
Service
To
obtain approved
and genuine
nearest Hoover Factory Service Center
or Authorized Hoover Warranty
Service Dealer (Depot)
l checking
Vacuum
l checking
Centers provided
OR-
*calling
automated referral of authorized
service outlet locations
OR-
* checking the Service section of
Hoover
wwwhoovercompanyeom
Do not
Company in
this will only result in
If
further assistance Is needed, contact
The
Hoover Company Consumer
Response Center, North Canton, Ohio
44720 Phone: 330-499-9499.
In
Canada, contact
Burlington, Ontario
Phone: l-800-263-6376.
Always identify your cleaner by
complete model number
ing
information or ordering parts. (The
model number appears on
the
cleaner.)
Cleaners - Household”
l-800-944-9200
Company on-line at
send
your cleaner to
North Canton
HOOVER
HOOVER
the Yellow Pages
the
parts, locate
by:
list of Factory Service
with
this cleaner
for an
(U.S.
for service,
delay.
Hoover Canada,
L7R 4A8,
when
the bottom of
service
under
only)
The
Hoover
the
request-
the
OR
The
Full
One Year
If
you have
a
problem
If
a
minor
problem occurs, it usually
be solved quite easily
found by
using
the check list
Possible cause
Possible solution
l Not firmly plugged in
l
Plug
unit in firmly
l No voltage In wall plug
l
Check fuse
l Blown fuse/tripped breaker
l
Replace fuse/reset
or breaker
Possible cause
Possible solution
l Recovery tank full/automatic
shut off engaged
l
Remove
l Blockage In tool on end of hose
l
Remove tool
l Recovery tank lid not on
and empty recovery
and clear blockage
correctly
l
Make sure lid is on
Possible cause
Possible solution
l Solution tank not firmly in place
l
Make sure tank is
position
l Solution tank empty
l
Refill tank
according to
surface being cleaned
l Recovery tank lid not on
correctly
l
Make sure lid is
Possible cause
Possible solution
l Indicator screen dirty
l
Remove
l Speed selector on OFF
l
clear cover over indicator
and
clean screen;
Move
speed selector to Low or Hi
when the
cause
below.
breaker
securely
securely locked
instructions
firmly in place
replace cover
tank
can
in
for
Warranty
(Domestic Use)
Your HOOVER@
is
normal household use, in
the Owner’s Manual
defects in material
period of
chase. This
to you, all
appliance in correct operating condition
during the warranted period.
ty applies
chased in the
territories
or from a U. S.
Appliances purchased elsewhere
ered
by a limited
covers
the
ty does
in a
not
commercial or
Warranty
presenting
lowing
authorized warranty service
lets. Proof
before service is rendered.
1.
Hoover Factory Service
2.
Hoover Authorized
Service Dealers (Depots).
For an automated referral of authorized
service outlets in the U.S.A., phone
l-800-944-9200 OR
visit The Hoover Company on-line at
www.hoovercompany.com
This
warranty does
delivery, or
mail your appliance to a
Service Center
transportation will be paid
While
this warranty gives
legal rights,
rights which
If
further assistance is needed, or if there
are
questions concerning this warranty
the
availability of
write or
phone the Consumer Response
Center, The
Maple
St., North Canton, Ohio 44720.
Phone
l-330-499-9499.
In Canada,
Burlington,
l-800-263-6376.
appliance is warranted
accordance
against original
and
workmanship for
one
full year
from
warranty provides, at no cost
labor
and
parts to place this
when
the appliance is
United States
and possessions, or in
Military
cost of parts
Exchange.
one
year warranty
only. This
apply if the appliance is
rental
application.
service
can
the
appliance to
only be obtained by
of purchase will be required
not
calls;
cover pick
however,
house
Hoover
for
warranty service,
you
you
may also have other
vary from
state to
warranty service
Hoover
contact
Ontario
Company, 101 East
Hoover Canada,
L7R 4A8,
date of
This
including
Canada
one of
Centers.
Warranty
Factory
one way.
specific
state.
with
pur-
warran-
pur-
its
are
cov-
which
warran-
used
the fol-
out-
up
if
you
outlets,
in
a
or
13
i
I
:
il
I
i
(
nbras
Loading...