Honeywell WMNBM11 User Manual

Integration into a Host System:

WM-N-BM-14

This radio module is designed for professional use and must be integrated into a host system
by qualified personnel only.
The module is granted a full modular approval, i.e. it can be integrated in host systems if the
following requirements are met:

- The following supply voltage specifications must be met: 3.3 VDC

- The UFL cable should have the following specific length: 105mm
Following Antennas are certified and can be used with the RF Module:

- LSR 2.4 Ghz -2.5 Ghz Dipole 2dBi Antenna for Reverse Polarity SMA
Additional antennas may be used provided they are from same type, having less or equal

gain and have similar in-band and out-of-band characteristics than one of the above listed
antenna.