Honeywell VISTA-128B Users Guide

9,67$%

&RPPHUFLDO %XUJODU\

3DUWLWLRQHG 6HFXULW\ 6\VWHP

ZLWK 6FKHGXOLQJ

8VHU *XLGH

ARMED

READY

			3	STAY
1	OFF	2 AWAY
		5	6 BYPASS
4	MAX		TEST
			9 CHIME
7 INSTANT		8 CODE
			#
		0
	READY

ARMED

READY

ON

OFF

1	OFF
4	MAX
7INSTANT
	READY

2 5 8 0

AWAY TEST CODE

3 STAY

6BYPASS

9CHIME #

K3270V1 5/03

TABLE OF CONTENTS

SYSTEM OVERVIEW ....................................	5
General .......................................................	5
A Partitioned System ..................................	5
Zones ..........................................................	6
Fire Protection ............................................	6
Burglary Protection .....................................	6
Alarms.........................................................	7
Memory of Alarm ........................................	7
Speed Key (Macros) ...................................	7
Using Schedules.........................................	7
Device Timers.............................................	8
To Access Another Partition (GOTO
Command) ..................................................	8
Master Keypad Operation...........................	8
Self-Help Feature........................................	9
Phone Access & Voice Response
Capability ....................................................	9
ABOUT THE KEYPADS...............................	10
General .....................................................	10
The Alpha Keypad ....................................	10
FUNCTIONS OF THE KEYPAD ..................	11
ENTRY/EXIT DELAYS .................................	14
General Information ..................................	14
SECURITY CODES & AUTHORITY
LEVELS ....................................................	15
General Information ..................................	15
Duress Code.............................................	15
Quick Arming ............................................	15
Authority Levels ........................................	16
General Rules on Authority Levels and
Changes ...................................................	17
To Exit User Edit Mode.............................	17
To Add a User...........................................	18
To Change a User's Code ........................	20
To Delete a User.......................................	20
ACCESSING OTHER PARTITIONS............	21
To Access Another Partition .....................	21
Global Arming ...........................................	21

Master Keypad Operation				.........................	22
Common Lobby Operation .......................					24
How User Codes Affect the Common
Lobby ........................................................					25
CHECKING FOR OPEN ZONES .................					26
Using the	READY		Key .....................		26
DISPLAYING ALL ZONE
DESCRIPTORS........................................					27
Using the	READY		Key .....................		27
BYPASSING PROTECTION ZONES ..........					28
Using the	6 BYPASS		Key.....................		28
Quick Bypass............................................					29
Displaying Bypassed Zones .....................					29
ARMING PERIMETER ONLY ......................					30
Using the	3 STAY	key		.........................	30
ARMING PERIMETER ONLY ......................					31
Using the	7 INSTANT			Key ..................	31
ARMING ALL PROTECTION.......................					32
Using the	2 AWAY		Key .......................		32
ARMING ALL PROTECTION.......................					33
Using the	4 MAXIMUM			Key...............	33
DISARMING AND SILENCING ALARMS ....					34
Using the	1 OFF	Key............................			34
Memory of Alarm ......................................					34
USING THE KEYSWITCH ...........................					35
General .....................................................					35
Arming ......................................................					35
Disarming..................................................					35
CHIME MODE ..............................................					36
Using the	9 CHIME		Key ......................		36

– 3 –

VIEWING CENTRAL STATION
MESSAGES .............................................	37
General Information..................................	37
PANIC KEYS................................................	38
Using Panic Keys .....................................	38
SPEED KEY (MACROS) .............................	39
General Information..................................	39
Defining ....................................................	39
Executing..................................................	40
ACCESS DOOR CONTROL........................	41
General Information..................................	41
Executing..................................................	41
USING #70 RELAY MENU MODE ..............	42
General Information..................................	42
USING SCHEDULES...................................	43
Delaying the Closing Time .......................	43
Temporary Open/Close Schedules ..........	43
Programming Temporary Schedules .......	44
PROGRAMMING DEVICE TIMERS ............	46
General Information..................................	46
EVENT LOG PROCEDURES ......................	48
General Information..................................	48
To Display The Event Log ........................	48
SETTING THE TIME AND DATE ................	49
TESTING THE SYSTEM .............................	50
Using the 5 TEST Key.........................	50

Testing Your System ................................	50
FIRE ALARM SYSTEM................................	51
General.....................................................	51
In Case Of Fire Alarm...............................	51
Silencing A Fire Alarm..............................	51
Fire Display Lock......................................	51
Typical Trouble Displays ..........................	52
Power Failure ...........................................	53
Recommendations For Smoke And
Heat Detectors .........................................	54
Recommendations For Proper
Intrusion Protection ..................................	56
EMERGENCY EVACUATION .....................	57
MAINTAINING YOUR SYSTEM ..................	58
Taking Care of Your System ....................	58
Replacing Batteries in Wireless
Sensors ....................................................	58
Silencing Low Battery Warning Tones
at the Keypad ...........................................	59
Routine Care ............................................	59
QUICK GUIDE TO SYSTEM
FUNCTIONS.............................................	60
SUMMARY OF AUDIBLE
NOTIFICATION ........................................	62
GLOSSARY .................................................	63
INDEX ..........................................................	69

– 4 –

System Overview

General

Congratulations on your ownership of an ADEMCO Partitioned Security System. You've made a wise decision in choosing it, for it represents the latest in security protection technology today. ADEMCO is the world's largest manufacturer of security systems and millions of premises are protected by ADEMCO systems.

This system offers you the following:

Nthree forms of protection: burglary, fire and emergency

Nat least one Keypad which provides full control of system operation

Nvarious sensors that provide perimeter and interior burglary protection

Na number of strategically placed smoke or combustion detectors designed to provide early warning in case of fire

Your system uses computer technology to continuously monitor all protection zones. If one or more protection zones are violated, the system initiates the appropriate alarm as programmed. The system may also have been programmed to automatically transmit alarm or status messages to a central alarm monitoring station.

A Partitioned System

Simply stated, a partitioned system shares one physical alarm system among different users, each with their own requirements. For the most part, you as a user need not know about other users and their structure in the system, but from time to time, you may see display messages that indicate the system is in use by another user. Do not be concerned, this is normal. Refer to the ACCESSING OTHER PARTITIONS section for additional information.

– 5 –

System Overview (cont’d)

Zones

Your system's sensing devices have been assigned to various "zones." For example, the sensing device on your Entry/Exit door may have been assigned to zone 001, sensing devices on windows in the master bedroom to zone 002, and so on. These numbers will appear on the display, along with an alpha descriptor for that zone (if programmed), when an alarm or trouble condition occurs.

Fire Protection

The fire protection portion of your security system (if used) is always on and will sound an alarm if a fire condition is detected. Refer to the FIRE ALARM SYSTEM section for important information concerning fire protection, smoke detectors and planning emergency exit routes from your house.

Burglary Protection

The burglary protection portion of your system must be turned on or "armed" before it will sense burglary alarm conditions. Your system provides four modes of burglary protection: STAY, AWAY, INSTANT and MAXIMUM, and even allows you to BYPASS selected zones of protection while leaving the rest of the system armed. The system also provides a CHIME mode, for alerting users to the opening and closing of doors and windows while the system is disarmed. Refer to the other sections of this manual for procedures for using these features.

System Overview (cont’d)

– 6 –

The following table lists the four different arming modes and the results of each.

	Features For Each Arming Mode
Arming	Exit	Entry	Perimeter	Interior
Mode	Delay	Delay	Armed	Armed
AWAY	Yes	Yes	Yes	Yes
STAY	Yes	Yes	Yes	No
INSTANT	Yes	No	Yes	No
MAXIMUM	Yes	No	Yes	Yes

Alarms

When an alarm occurs, both the keypad and external sounders will sound, and the keypad will display the zone(s) causing the alarm. If your system is connected to a central monitoring station, an alarm message will also be sent. To stop the alarm sounding, simply disarm the system.

Memory of Alarm

When an alarm condition occurs, the keypad displays the number(s) of the zone(s) that caused the problem, and displays the type of alarm (ex. FIRE, ALARM). It remains displayed until it is cleared by disarming the system (see DISARMING THE SYSTEM section).

Speed Key (Macros)

The system can store a string of up to 32 keystrokes, which can be activated anytime by simply pressing the “A, B, C, or D” keys. This feature can be used to make it easy to perform multiple functions at once (such as going to another partition to bypass a zone), or it can be used to simplify an everyday, repeated procedure. Refer to the SPEED KEY section for procedures for using this feature.

Using Schedules

Your system may have been programmed with schedules for automatically arming, disarming and activating various devices and/or performing other system functions at predetermined times. Users can modify some of these schedules by manually delaying a closing time, using temporary schedules, or by programming special user schedules. Refer to the USING SCHEDULES section at the end of this manual for scheduling related procedures.

– 7 –

System Overview (cont’d)

Device Timers

The system provides up to 20 "timers" that can be used to control various devices, such as lights or appliances. These timers are similar in concept to the individual appliance timers that might be purchased at a department store. The devices that can be controlled are programmed into the system by the installer. Up to 96 of these devices can be programmed. Refer to the PROGRAMMING DEVICE TIMERS section for procedures.

To Access Another Partition (GOTO Command)

Each keypad is assigned a default partition for display purposes, and will show only that partition's information. But, if the user is authorized, a keypad in one partition can be used to perform system functions in another partition, by using the GOTO command. Note that only those partitions authorized and programmed by the installer can be accessed in this manner.

To GOTO another partition, enter your security code, then press [ ] followed by the desired partition number (1-8).

The keypad will remain in the new partition until directed to go to another partition, or until 120 seconds has elapsed with no keypad activity. Entering your security code, pressing [ ] followed by [0] will return the keypad to its original partition.

Master Keypad Operation

A "Master" keypad is one on which the status of all 8 partitions is displayed simultaneously. A user can get more information about a certain partition by simply entering [ ] + the desired partition number (1-8). To log on to the "Master" partition (9) using the GOTO command, and to perform any functions at a Master keypad, a user must have access to all partitions.

– 8 –

System Overview (cont’d)

Self-Help Feature

Abbreviated user's instructions are built into the system: These can be viewed on the keypad's message display. These instructions are useful if this manual is not available.

To view the abbreviated instructions:

Simply press and hold down the function key of interest until the description starts to appear (about 5 seconds) and then release it. The system must be “READY TO ARM” to perform this function.

Refer to the FUNCTIONS OF THE KEYPAD section for descriptions of each key function.

Phone Access & Voice Response Capability

Your system may include a 4285 or 4286 VIP module that will permit you to access the system via a touch-tone phone, either on-premises or by call-in when away. The phone access feature will enable you to do the following:

NReceive synthesized voice messages over the telephone regarding the status of the security system.

NArm and disarm the system and perform most function commands via the telephone, with voice confirmation provided after each command entry.

NControl 4204/4204CF relays devices and lights and appliances through the #70 Manual Relay Activation mode.

Complete information regarding the use of this feature is provided in a separate manual entitled PHONE ACCESS USER'S GUIDE, that accompanies the 4285 or 4286 VIP module.

– 9 –

About The Keypads

General

IMPORTANT: If the keypad beeps rapidly upon entering the premises, it indicates that an alarm has occurred during your absence. LEAVE IMMEDIATELY and CONTACT THE POLICE from a safe location nearby.

Your keypads allow you to control all system functions. The keypads feature a telephone style (digital) keypad and a Liquid Crystal Display (LCD) that shows the nature and location of all occurrences. Keypad display back lighting is programmable to always stay on or to light only when a key is pressed, then turn off a few minutes later.

The keypads also feature a built-in sounder that will sound during alarms and troubles. It will also "beep" during certain system functions, such as during entry/exit delay times, during CHIME mode, and when depressing keys to perform system functions (to acknowledge the key press). These sounds can be optionally suppressed in some of your keypads (so as not to disturb other users of the system). Ask your installer if this has been done.

The Alpha Keypad

Alpha keypads feature a 2-line, 32 character alphanumeric Liquid Crystal Display (LCD) that can display system messages in user-friendly English. Abbreviated user's instructions can also be displayed (see Self Help paragraph in the SYSTEM OVERVIEW section). These keypads can also be programmed with custom zone descriptors.

– 10 –

Functions Of The Keypad

LCD

DISPLAY

SPEAKER

	ARMED	A	1	OFF	2	AWAY	3	STAY
	LEDS
		B	4 MAX		5 TEST		6 BYPASS
	READY
		C	7 INSTANT		8	CODE	9	CHIME
		D		READY	0		#

FUNCTION

KEYS

6160-00-002-V1

IMPORTANT! When using the keypad to enter codes and commands, sequential key depressions must be made within 3 seconds of one another. If 3 seconds elapses without a key depression, the entry is aborted and must be repeated from its beginning.

– 11 –

Functions Of The Keypad (cont’d)

ALPHA DISPLAY WINDOW: A 2-line, 32-character Liquid Crystal Display (LCD). Displays protection point identification and system status, messages, and user instructions.

1 OFF : Disarms the burglary portion of

the system, silences alarms and audible trouble indicators, and clears visual alarm trouble after the problem has been corrected.

2 AWAY : Completely arms both

perimeter and interior burglary protection by sensing an intruder's movements through protected interior areas as well as guarding protected doors, windows, etc. Late arrivals can enter through an entry delay zone without causing an alarm if the system is disarmed before the entry delay time expires.

3 STAY : Arms the perimeter burglary

protection, guarding protected doors, windows and other perimeter protection points, and sounds an alarm if one is opened. Allows automatic bypassing of certain areas, that allows movement within your house without causing an alarm. Late arrivals can enter through an entry delay zone without causing an alarm if the system is disarmed before the entry delay time expires. See ARMING PERIMETER ONLY for a full explanation of the STAY key.

4 MAXIMUM : Arms in manner similar

to AWAY mode, but eliminates the entry delay period, thus providing maximum protection. An alarm will occur immediately upon opening any protection point, including entry delay zones.

5 TEST : Tests the system and alarm

sounder if disarmed.

6 BYPASS

:

Removes

individual

protection zones from being monitored by the system. Displays previously bypassed protection zones.

7 INSTANT : Arms in manner similar

to STAY mode, but turns off the entry delay period, offering greater security while inside and not expecting any late arrivals. An alarm will occur immediately upon opening any perimeter protection point, including entry delay zones.

8 CODE : Allows the entry of additional

user codes that can be given to other users of the system.

9 CHIME : Turns on & off the CHIME

mode. When on, any entry through a protected delay or perimeter zone while the system is disarmed will cause a tone to sound at the Keypad(s).

– 12 –

Functions Of The Keypad (cont’d)

READY : When depressed prior to

arming the system, the keypad will display all open protection zones within the keypad's home partition. This key is also used to display all zone descriptors that have been programmed for your system, by holding the key down for at least 5 seconds.

#: Permits ARMING of the system

without use of a security code ("Quick Arm", if programmed).

KEYS 0-9: Used to enter your individual security access code(s).

LED READY INDICATOR: (GREEN) Lit indicates system is ready to be armed, while unlit indicates system not ready.

LED ARMED INDICATOR: (RED) Lit when the system has been armed (STAY, AWAY, INSTANT, or MAXIMUM).

SPEAKER: Source of audible internal warning and confirmation sounds, as well as alarms (see "Summary of Audible Notifications").

FUNCTION KEYS: These keys can be used for Speedkey (macros) functions or panic keys. Refer to the SPEEDKEY (MACROS) and PANIC KEYS sections for descriptions of these functions.

–13 –

Entry/Exit Delays

General Information

Your system has installer-programmed time delays, known as exit delay and entry delay. Whenever you arm your system, exit delay gives you time to leave through the designated exit door without setting off an alarm. Exit delay begins immediately after entering any arming command, and applies to all modes of arming protection. If programmed, a slow beeping will sound throughout the exit delay period.

Entry Delay gives you time to disarm the system when you reenter through the designated entrance door. But the system must be disarmed before the entry delay period ends, or an alarm will occur. The keypad will beep during the entry delay period, reminding you to disarm the system. You can also arm the system with no entry delay at all by using either INSTANT or MAXIMUM arming modes. These modes provide greater security while on the premises or while away for extended periods of time. See your installer for your delay times.

– 14 –

Security Codes & Authority Levels

General Information

At the time of installation, you were assigned an authority level and a personal four-digit security code, known only to you and yours. The security code must be entered when arming and disarming the system. The authority level defines the system functions that you can perform.

As an additional safety feature, other users that do not have a need to know your code can be assigned different security codes, and each user can be given a different authority level. Users are identified by "user numbers", that are assigned when assigning a user's security code.

All codes can be used interchangeably when performing system functions within the limits of each code's authority level (a system armed with one user's code can be disarmed by another user's code), with the exception of the Operator Level C code. See AUTHORITY LEVELS on the following page for details regarding authority levels.

Duress Code

This feature is intended for use if you are forced to disarm or arm the system under threat. When used, the system will act normally, but can silently notify the central station of your situation, if that service has been provided. The duress code is pre-assigned by the installer during installation (authority level 6).

Important: This code is useful only when the system is connected to a central station.

Quick Arming

Note that if "Quick Arming" was programmed by the installer, the [#] key can be pressed in place of the security code when arming the system. The security code must always be used to disarm the system, however.

– 15 –

Security Codes & Authority Levels (cont’d)

Authority Levels

Authority levels define the system functions a particular user can perform. Depending on the authority assigned to you, there are certain system functions you may be prohibited from performing. In summary, there are six authority levels, each having certain system restrictions as shown below.

Level 1 Master: Can perform all system functions in assigned partitions, and can add, delete or change Manager and Operator level users. Master codes are added by the Installer.

Level 2 Manager: Can perform system functions in assigned partitions, and can add, delete or change Operator level users.

Level 3 Operator A: Can perform system functions in assigned partitions, but cannot add or delete other users.

Level 4 Operator B: Same as Operator A, except Operator B cannot bypass zones of protection.

Level 5 Operator C: Can arm the system in assigned partitions, but cannot disarm the system unless the system was armed with this code. This code is typically assigned to someone who has a need to arm/disarm the system only at certain times (such as a baby-sitter).

Level 6 Duress: Can arm and disarm the system, but also sends a silent panic alarm to the central station, if that service is connected.

To view your authority level and system capabilities:

1.Enter your code + [ ] + [ ].

2.The keypad will display the partition(s) that you are authorized to operate, and your user number and authority level in each partition.

– 16 –

Security Codes & Authority Levels (cont’d)

General Rules on Authority Levels and Changes

NA user may not delete or change the user code of the SAME or HIGHER authority than which he is assigned.

NA user may only ADD users to a LOWER authority level.

NA user may assign access codes only to those partitions to which the user adding the code has access. (ex. a user with access to only partition 1 cannot assign codes in partition 2.)

NThe only way to assign a user's authority level is by using the "Add A User" procedure. To change a user's authority level, that user must first be deleted, then added again.

NA user can only be DELETED or CHANGED from within the partition he is assigned.

NUser numbers must be entered as 3-digit entries. Single digit user numbers must be preceded by a "00" (example, 003, 004, etc.). Security codes are entered as 4-digit numbers.

NBefore assigning a security code, be sure it does not conflict with any DURESS code.

Note: When adding, changing or deleting users, all other alpha keypads in that partition will display "User Edit Mode – Please Stand By", and key depressions (except Panic) at those keypads will be ignored. Panic key depressions will cause an alarm and terminate user entry.

To Exit User Edit Mode

You can exit any of the user edit modes described on the following pages at any time by doing the following:

1. Press either or # , or don't press any key for 10 seconds.

2. System returns to normal mode.

– 17 –

Security Codes & Authority Levels (cont’d)

To Add a User

IMPORTANT: Temporary users should not be shown how to use any system function they do not need to know (e.g. bypassing protection zones).

1. Enter Master or Manager code and press the 8 CODE key.

2.Enter the new user's 3-digit User Number (002-150).

3.Enter 4-digit security code for that user. The following prompts will appear.

ADD NEW USER? 0 = NO , 1 = YES

USER NUMBER = 003 ENTER AUTH. LEVEL

Enter 1 to add a new user code. Entering 0 will change the existing user's code to the code entered in step 3. See Changing A User's Code section.

Enter the authority level, 1-6, for this user within this partition.

1=master	2=manager	3=operator A
4=operator B	5=operator C	6=duress code

ACCESS GROUP? ENTER 0-8

RF BUTTON ?

0 = NO , 1 = YES

If access schedules have been programmed, this prompt appears. Enter the user’s access group number (1-8) if this user should have limited access to the system. Enter 0 if no access group should be assigned.

This prompt will appear if a 5800 series button transmitter has been supplied and has not yet been assigned to a user. Press 1 if a button transmitter will be assigned to this user. Otherwise press 0.

ENTER BUTTON ZN # (001-150)

MULTI-ACCESS ? 0 = NO , 1 = YES

If assigning a button transmitter, this prompt will appear. Enter the button's zone number (see your installer for zone number).

If you as a user have access to other partitions, the keypad will prompt for ability of this new user to access (GOTO) those partitions. Press 0 (NO) or 1 (YES). If no, the system activates this user code and exits “Add a User” mode. If yes, the keypad prompts for the Global Arm option for this user.

– 18 –

Security Codes & Authority Levels (cont’d)

GLOBAL ARM ? 0 = NO , 1 = YES

PART.2 - SHOP? 0 = NO , 1 = YES

PART. 1 A0 WHSE USER 003 AUTH=3G.

Press 1 (YES) if this user will be allowed to try to arm more than one partition at the same time. Press 0 if this user will arm only his assigned partition.

The keypad now prompts for the user’s access to the next partition (see GOTO command). Again press 0 or 1. If yes, the system will automatically assign a user number for use in that partition and will prompt for authority level and global arm options for this user within the partition (see previous steps).

When all partitions have been displayed, the keypad will scroll through the partition(s) to which access has been assigned, and will display the user number, authority level and global arm option for each. The “G” after the authority level indicates that the global arm feature is active for this user in the displayed partition. The " " indicates the partition from which this user can be changed or deleted. The "." at the end of the second line indicates that this user sends open/close reports. Open/close reporting is automatically active for any users added by you, if you have open/close reporting active.

– 19 –

Security Codes & Authority Levels (cont’d)

To Change a User's Code

1. Enter Master or Manager code and press the 8 CODE key + user

number to be changed.

2. Enter the new code for that user.

ADD NEW USER? 0 = NO , 1 = YES

USER 002 CHANGED SUCCESSFULLY

The system will recognize that the user number is already in use and will prompt whether or not this is a new user. Enter 0 to change the existing user's code to the code entered in step 3.

The system will confirm that the change is allowed based on authorization level, and if so, will put the new code into effect.

Note that if changing one’s own code, the system will prompt for the new code to be reentered. This prevents accidentally changing one's own code.

To Delete a User

1. Enter Master or Manager code and press the 8 CODE key + user

number to be deleted.

2. Enter Master or Manager code first entered.

OK TO DELETE 0 = NO , 1 = YES

USER CODE DELETED

The system will recognize that the User number is already in use and will prompt to confirm that it should be deleted. Press 0 (NO) or 1 (YES).

If yes, that user's code will be removed from all partitions to which it was assigned, and all authorization levels and other information about that user will be deleted. Note that a user can only be deleted from the partition in which it was first assigned, and can only be deleted by a user with a higher authority level. A User's security code cannot be deleted by oneself.

– 20 –

Accessing Other Partitions

To Access Another Partition

Each keypad is assigned a default partition for display purposes, and will show only that partition's information. But, if the user is authorized, a keypad in one partition can be used to perform system functions in other partitions by using the GOTO command. Note that only those partitions authorized and programmed by the installer can be accessed in this manner.

To GOTO another partition:

1. Enter your security code, then press READY + partition number (0-8).

Entering partition number 0 will return the keypad to its original partition.

2. LOG-ON TO AAAA PART. X COMPLETE

The keypad will remain in the new partition until directed to go to another partition, or until 2 minutes has elapsed with no keypad activity.

AAAA = alpha descriptor programmed by the installer

X = partition number

Global Arming

The Global Arming option may have been programmed for use by some users. If Global Arming was enabled for use with your security code, a keypad prompt (message) will appear after pressing one of the arming function keys (STAY, INSTANT, AWAY, MAXIMUM, OFF). Follow the keypad prompts to continue arming the system. See your installer for detailed instructions on the use of this feature.

If global arming does not apply to your security code, use the procedures described in the following pages.

– 21 –

Accessing Other Partitions (cont’d)

Master Keypad Operation

A "Master" keypad is one that reflects the status of the entire system (Partitions 1-8) on its display. This is useful because it eliminates the need for a security officer in a building to have to "log-on" to various partitions from one partition's keypad to find out where an alarm has occurred.

A description of a typical display follows:

SYSTEM	1 2 3 4 5 6 7 8
STATUS	R R N N A S B

The status of each partition is directly below the partition number on the display. Possible status indications include:

A = Armed Away	S = Armed Stay	M = Armed Maximum
I = Armed Instant	R = Ready	N = Not Ready
B = Bypassed/Ready	= Alarm Memory/Trouble present

To obtain more information regarding a particular partition, enter [%] + [Partition No.] (i.e., %4). This will allow viewing only of that partition. In order to affect that partition, the user must log on with a code that has access to that partition.

Also, in order for a user of any partition to log onto the "Master" partition (Partition 9) to view the status of all partitions, and to perform any functions at the Master keypad, that user must have access to all partitions. Otherwise, access will be denied.

The following is an example of what would be displayed for a fault condition on Zone 002 (Loading Dock Window) on Partition 1 (Warehouse) when logging on from a keypad on Partition 9:

WHSE DISARMED

HIT FOR FAULTS

This is the normal display that appears at Partition 1's keypad(s).

– 22 –