Honeywell V6000 User Manual

V6000

Kombi-F-II, Kombi-F

FLANGED BALANCING AND SHUTOFF VALVES

Kombi-F-II

Design

• Valve body with flanges drilled to DIN

• Valve insert with handwheel and pre-setting display

• Pressure test cocks

Materials

• Valve housing made of cast iron GG25, painted blue

• Valve insert made of stainless steel with seat sealing

made of PTFE

• Pressure test cocks made of brass

• Handwheel made of steel, painted black

• Fairing made of plastic, black

PRODUCT DATA

CONTENTS

Design................................................................................... 1

Materials ............................................................................... 1

Application ........................................................................... 1

Features................................................................................ 1

Specifications ...................................................................... 2

Dimensions and Ordering Information .............................. 2

Accessories.......................................................................... 3

Measuring Equipment................................................. 3

Spare Parts................................................................. 3

Installation Example ............................................................ 3

Flow Data Kombi-F-II (DN15...DN200)........................ 4 to 15

Flow Data Kombi-F (DN250...DN400)....................... 16 to 19

Influence of Coolants on Flow Values ............................. 20

Correction Factor f.................................................... 20

Application

The hydronic balance is a significant requirement for the efficient operation of a hydronic heating or cooling installation. In an unbalanced system under or over provision of hot water to individual radiators or circuits can occur. Apart from the correct selection of radiator valves, regulation of individual circuits is also necessary and in some cases, such as in DIN 18 380, VOB part C, is required by national standards.

This requirement is met with Kombi-F-II and Kombi-F shutoff and balancing valves.

Kombi-F-II and Kombi-F have functions shut-off, pre-setting and measuring.

Features

• Balancing through stroke limitation with digital pre- setting and visible pre-setting indicator

• Equipped with 2 pressure test cocks for differential pressure measurement

• Non rising spindle with EDD

• Pre-setting isn`t altered when handwheel is turned

• Stroke limitation-screw protected by protection cap

• PTFE seat sealing

• Spindle made of stainless steel

• Valve body made of corrosion resistant cast iron

• Available in dimensions up to DN400

KOMBI-F-II, KOMBI-F (V6000)

Specifications

Medium Water, water-glycol mixture

Operating temperature -10...120°C (14...248°F)

short run 130°C (266°F

Operating pressure max. 16 bar (232 psi)

vs (cv)-values see table below and flow

diagrams

Dimensions and Ordering Information

DN15 – DN80 DN100 – DN200 DN250 – DN400

DN (R) kvs (cv)-value L H Ø D Ø K n x Ø d Weight OS-No.

100

125

150

200

1/2” 4,50 (5,27) 130 225 95 65 4 x 14 3,5 kg V6000D0015

3/4” 6,60 (7,72) 150 225 105 75 4 x 14 4,1 kg V6000D0020

1” 9,80 (11,5) 160 225 115 85 4 x 14 4,8 kg V6000D0025

1 1/4” 15,1 (17,7) 180 225 140 100 4 x 18 6,6 kg V6000D0032

1 1/2” 24,9 (29,1) 200 280 150 110 4 x 18 9,0 kg V6000D0040

2” 48,5 (56,7) 230 280 165 125 4 x 18 11,5 kg V6000D0050

2 1/2” 74,4 (87,0) 290 365 185 145 4 x 18 18,5 kg V6000D0065

3” 111 (130) 310 395 200 160 8 x 18 24,5 kg V6000D0080

4” 165 (193) 350 430 220 180 8 x 18 40,0 kg V6000D0100

5” 242 (283) 400 495 250 210 8 x 18 79,0 kg V6000D0125

6” 372 (435) 480 530 285 240 8 x 22 91,0 kg V6000D0150

8” 704 (824) 600 665 340 295 8 x 22 170 kg V6000D0200

DN (R) kvs (cv)-value L H Ø D Ø K n x Ø d Weight OS-No.

250

300

350

400

10” 812 (950) 730 600 405 355 12 x 22 265 kg V6000D0250

12” 1.380 (1.615) 850 685 460 410 12 x 26 360 kg V6000D0300

14” 1.651 (1.932) 980 775 520 470 16 x 26 535 kg V6000D0350

16” 2.389 (2.795) 1.100 790 580 525 16 x 30 765 kg V6000D0400

NOTE: All dimensions in mm if not stated otherwise.

Fig. 1. Dimensions

Table 1. Dimensions Kombi-F-II

Table 2. Dimensions Kombi-F

Accessories

KOMBI-F-II, KOMBI-F (V6000)

Measuring Equipment

Set of 2 measuring adapters

for all dimensions VA3600A008

Extension piece for pressure test cocks, length 45 mm, for insulated Kombi-F-II and Kombi-F

for all dimensions VA2601A008

‘BasicMES’ handheld measuring computer

for all dimensions; computer is supplied with case and accessories

VM241A1002

Installation Example

Spare Parts

Spare set of 2 pressure test cocks G1/4”

for all dimensions VA2600A008

Fig. 3. Kombi-F in a cooling system

KOMBI-F-II, KOMBI-F (V6000)

Flow Data Kombi-F-II, DN15

Pre-setting

kv-value

cv-value

0,5 1,0 1,5 2,0 2,5 3,0 3,5 4,0 4,5 5,0 5,5 6,0 6,5 6,6 = open

0,13 0,26 0,37 0,55 0,80 1,10 1,50 1,90 2,30 2,60 2,90 3,30 4,20 kvs = 4,50

0,15 0,30 0,43 0,64 0,94 1,29 1,76 2,22 2,69 3,04 3,39 3,86 4,91 5,27

Flow Data Kombi-F-II, DN20

KOMBI-F-II, KOMBI-F (V6000)

Pre-setting

kv-value

cv-value

0,5 1,0 1,5 2,0 2,5 3,0 3,5 4,0 4,5 5,0 5,5 6,0 6,5 6,6 = open

0,22 0,43 0,65 0,90 1,15 1,60 2,06 2,60 3,26 4,00 4,79 5,60 6,43 kvs = 6,60

0,26 0,50 0,76 1,05 1,35 1,87 2,41 3,04 3,81 4,68 5,60 6,55 7,52 7,72

KOMBI-F-II, KOMBI-F (V6000)

Flow Data Kombi-F-II, DN25

Pre-setting

kv-value

cv-value

0,5 1,0 1,5 2,0 2,5 3,0 3,5 4,0 4,5 5,0 5,5 6,0 6,5 6,6 = open

0,22 0,49 0,84 1,30 1,85 2,50 3,25 4,10 5,07 6,20 7,50 8,70 9,63 kvs = 9,80

0,26 0,57 0,98 1,52 2,16 2,93 3,80 4,80 5,93 7,25 8,78 10,2 11,3 11,5

+ 14 hidden pages