Honeywell V5852, V5862 Catalog Page

Cartridge Globe Valves

V5852; V5862 Two-way Cartridge Globe Valves

Two-way Cartridge Globe Valves control hot and/or chilled water for VAV terminal units, fan coil units, small reheaters and recoolers in electric/electronic temperature control systems. Used with the M6410 3-position floating Non-Spring Return Valve Actuator and the M7410 selectable 0 to 10 Vdc or 2 to 10 Vdc Non-Spring Return Actuator. The 1/2” and 3/4” valves are compatible with the M6435 floating Spring Return Actuator, the M7435 selectable 0 to 10 Vdc or 2 to 10 Vdc Spring Return Actuator, and the MP958 Pneumatic Actuator. Larger valves (1" through 1-1/2”) are pressure balanced, which results in higher close-off pressures.

• Long stroke allows wider range of control

• Soft valve seat provides low leakage rate

• Inserts for 1/2 in. and 3/4 in. valves are changeable without draining valve when used with an insert replacement tool

• Brass body and Stainless Steel stem

• Threaded plastic cover/manual handle allows manual operation

• Easily installed in areas where space is limited

Valve Type: Cartridge Globe Valve Body Pattern: Tw o- w ay Controlled Medium: Chilled or hot water with up to 50% Glycol;

not for use with steam or fuels

Leakage Rating:

1/2 in. and 3/4 in. valves:

1 in., 1 1/4 in., 1 1/2 in. valves: ANSI Class III (less than 0.02% of Cv)

ANSI Class IV (0.01% of Cv maximum)

Maximum Safe Operating Pressure: 235 psi (1620 kPa) Ambient Temperature Range: 36 F to 230 F (2 C to 110 C) Stem Travel: 1/4 in. (6.4 mm) Actuation: Must be purchased separately Materials (Body): Brass (Stem): Stainless Steel (Seat): Brass (Cartridge): Brass (Plug/Ball/Disc): Brass

Replacement Parts:

0902812-Replacement Insert for 1/2” V5852/V5862, 0.19 Cv

Interchangeable with 0902809 or 090210

0902814-Replacement Insert for 3/4” V5852/V5862, 2.9 Cv

Interchangeable with 0902815

0902815-Replacement Insert for 3/4” V5852/V5862, 4.9 Cv

Interchangeable with 0902814

0903827-Replacement Packing for 1" V5862/63 0903828-Replacement Packing for 1-1/4” V5862/63 0903829-Replacement Packing for 1-1/2” V5862/63

Accessories:

0902807-Replacement Insert for 1/2” V5852/V5862, 1.9Cv

Interchangeable with 0902808

0902808-Replacement Insert for 1/2” V5852/V5862, 1.2 Cv

Interchangeable with 0902807

0902809-Replacement Insert for 1/2” V5852/V5862, 0.74 Cv

Interchangeable with 0902810 or 090212

0902810-Replacement Insert for 1/2” V5852/V5862, 0.47 Cv

Interchangeable with 0902809 or 090212

0903827-Replacement Packing for 1" V5862/63

Commercial

Components

Valve Size Flow Capacity

Product Number

V5852A2007 1/2 in. DN15 0.19 Cv 0.16 kvs Equal

V5852A2015 1/2 in. DN15 0.29 Cv 0.25 kvs Equal

V5852A2023 1/2 in. DN15 0.47 Cv 0.41 kvs Equal

V5852A2031 1/2 in. DN15 0.7 Cv 0.6 kvs Equal

V5852A2049 1/2 in. DN15 1.2 Cv 1.0 kvs Equal

V5852A2056 1/2 in. DN15 1.9 Cv 1.6 kvs Equal

V5852A2064 3/4 in. DN20 2.9 Cv 2.5 kvs Equal

V5852A2072 3/4 in. DN20 4.9 Cv 4.2 kvs Equal

V5862A2005 1/2 in. DN15 0.19 Cv 0.16 kvs Equal

V5862A2013 1/2 in. DN15 0.29 Cv 0.25 kvs Equal

Flow Characteristic

Percentage

Maximum Close-off

Connection Type

Sweat (Female)

Female NPT

70-6910 557

Valve Action

Stem down to close

Pressure

Used With(inch) DN (Cv) (Kv) (psi) (kPa)

232 psi 1600 kPa M6410A1029; M7410F1000;

232 psi 1600 kPa M6410A1029; M6435A1004;

232 psi 1600 kPa M6410A1029; M7410F1000;

232 psi 1600 kPa M6410A1029; M6435A1004;

174 psi 1200 kPa M6410A1029; M7410F1000;

174 psi 1200 kPa M6410A1029; M6435A1004;

58 psi 400 kPa M6410A1029; M7410F1000;

58 psi 400 kPa M6410A1029; M6435A1004;

232 psi 1600 kPa M6410A1029; M6435A1004;

232 psi 1600 kPa M6410A1029; M7410F1000;

M6435A1004; M7435F1001; MP958

M7410F1000; M7435F1001; MP958

M6435A1004; M7435F1001; MP958

M7410F1000; M7435F1001; MP958

M6435A1004; M7435F1001; MP958

M7410F1000; M7435F1001; MP958

M6435A1004; M7435F1001; MP958

M7410F1000; M7435F1001; MP958

M6435A1004; M7435F1001; MP958