Honeywell V5328A DATASHEET

V5328A

FLANGED LINEAR VALVE PN16

SPECIFICATION DATA

GENERAL

These single-seated valves are used for modulating control of
hot / chilled water or steam in heating, ventilating and air
conditioning systems.

The valves can be operated by linear actuators
ML6420/ML6425, ML7420/ML7425, ML6421/ML7421, or by
pneumatic actuators MP953.

FEATURES

• Iron body with flanged end connections

• Low seat leakage rate

• Metal-to-metal seating for long life span

• Self-adjusting packing

• Accurate positioning to ensure state-of-the-art

temperature control

• Easy mounting of direct-coupled electric and

pneumatic actuators

• Approved according to DIN 32730

SPECIFICATIONS

Action Stem down to close

Nominal pressure rating PN16

Flow characteristic Equal percentage, n

Rangeability 50:1

Leakage rate ≤0.05% of kVS up to DN50

≤0.1% of k

Stroke 20 mm (DN15 to DN 80)
38 mm (DN100 to DN150)

Valve body

End connections Flanged per ISO 7005-2
Material Cast iron (GG25)

Dimensions See Fig. 1

Trim

Seat Stainless steel, replaceable
Stem Stainless steel
Plug Stainless steel, skirt guided

Packing Spring loaded PTFE cone rings

Medium temperature and pressure

20 mm

120...150 °C; max. 1400 kPa

150...170 °C; max. 1370 kPa

38 mm

120...150 °C; max. 1440 kPa

150...200 °C; max. 1280 kPa

Maximum temperature
differential in alternating
hot/cold water use 60 K

2...120 °C; max. 1600 kPa

2...120 °C; max. 1600 kPa

DN65 to DN150

VS

gl

= 3.4

® U.S. Registered Trademark EN0B-0291GE51 R0909
Copyright © 2009 Honeywell Inc. All Rights Reserved.

V5328A FLANGED LINEAR VALVE PN16

SIZES AND FLOW CAPACITIES

order number valve size kVS

V5328A1138 DN15 0.25

V5328A1146 DN15 0.40

V5328A1153 DN15 0.63

V5328A1005 DN15 1.00

V5328A1013 DN15 1.60

V5328A1021 DN15 2.50

V5328A1039 DN15 4.00

V5328A1047 DN20 4.00

V5328A1054 DN20 6.30

V5328A1062 DN25 10.00

V5328A1070 DN32 16.00

V5328A1088 DN40 25.00

V5328A1096 DN50 40.00

V5328A1104 DN65 63.00

V5328A1112 DN80 100.00

V5328A1195 DN100 160.00

V5328A1203 DN125 250.00

V5328A1211 DN150 360.00

INSTALLATION

• Water should meet VDI 2035 requirements.

• Do not install valve with stem below the horizontal.

• Fluid flow must correspond with the arrow direction on the

valve body.

• The installation of a strainer is strongly recommended.

REPAIR PACKING KIT

Part no.: R 43 176 754 - 001 (DN15...32)
R 43 176 754 - 002 (DN40...80)
R 43 176755 – 005 (DN100…150)

ACTUATORS

Electric Actuators

force 600 N

model

ML6420A
ML7420A

stroke 20 mm 38 mm

size DN15-80 DN100-150

600 N

spring return

ML6425A,B
ML7425A,B

M6421A
M7421A

1800 N

M6421B
M7421B

Pneumatic Actuators

valve

size

DN

15-80

DN

100-150

pneumatic

actuator

model size direct reverse

MP953A
MP953B

MP953C
MP953D

MP953A
MP953C

5“, 8“

7“

5“, 8“

7“

13“

action

x x

x x

x -

DIMENSIONS (MM) VALVE

stroke

1

Y

1,2,3

Y

Without stem
extension for

ML6420/25

B

ML7420/25

M6421, M7421

MP953A,C 5”

MP953B,D

A

Fig. 1. V5328A

valve

size

A B

15 130

20 150

72

25 160

32 180 89

40 200

50 230

93

65 290 112

80 310 114

100 350 150

125 400

150 480

157

adjustment dimension

(valve in closed position)

Y1 Y2 Y3

89 133 -

133 - 190

2

Y

With stem

extension for

MP953A,C 8”

positioner

yes

no

yes

no

3

Y

With stem

extension for

MP953A,C 13”

EN0B-0291GE51 R0909 2