Cage Valves
V5051A Single-Seated Cage Valves
Dimensions in inches (millimeters)
CLEARANCE
TO REMOVE
|
|
ACTUATOR |
|
4 (102) MINIMUM |
|
|
|
|
|
||||||||||||||||||
|
|
FROM VALVE |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
VALVE |
A |
|
B |
|
C |
|
|||||
|
|
|
VALVE |
|
|
|
|
|
|
|
SIZE |
IN. |
MM |
IN. |
MM |
IN. |
MM |
||||||||||
|
|
|
LINKAGE |
|
|
|
|
|
|
|
|||||||||||||||||
|
|
|
|
|
|
|
|
2-1/2 |
9-1/2 |
241 |
3-1/2 |
89 |
4-5/8 |
117 |
|||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||||||||||
15-1/16 |
|
|
|
|
|
|
|
|
|
|
|
|
3 |
11 |
297 |
3-15/16 |
100 |
4-7/8 |
124 |
||||||||
(382) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
|
|
4 |
13 |
330 |
4-1/2 |
114 |
5-5/8 |
143 |
|||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
5 |
15 |
381 |
5-1/2 |
140 |
7-3/8 |
187 |
|||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
6 |
16-1/2 |
419 |
6-3/8 |
162 |
7-3/8 |
187 |
|||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
C
B
Single-Seated Cage Valves control steam, air, liquids, or noncombustible gases in two-position, proportional, or floating control systems where line isolation is not required.
•Pressure balanced cage type construction
•Low operating force allows fail safe operation with spring return actuator
•Combines 1 3/8” bonnet with 1 1/2” stroke
•Sizes range from 2-1/2 to 6 in. (DN65 to DN150)
•Spring-loaded Teflon V-ring packing
•Requires Q5020C valve linkage with one rotary, direct coupled actuator, or Q5001D with Modutrol Motor
Valve Type: Cage Valves
Body Pattern: Two-way, Straight-through
Connection Type: Flanged
Flow Characteristic: Modified Linear
Controlled Medium: Steam; Chilled or hot water with up to 50% Glycol; not for use with fuels
Leakage Rating: 0.01% of Cv, 0.03% of Cv @ 5 & 6 in.
Maximum Safe Operating Pressure: 55 psi steam (379 kPa steam); 150 psi water at 100F (1034 kPa water at 38 C)
Maximum Differential Pressure Ratings (Close-off): 150 psi (1034 kPa)
Ambient Temperature Range: 35 F to 300 F (2 C to 150 C)
Stem Travel: 1 1/2 in. (38 mm) Bonnet Size: 1 3/8 in. (35 mm) Valve Action: Stem down to close
ANSI/ASME Rating: 125
Actuation: Must be purchased separately
Comments: Q5001D1000 requires 1-1/2 in. 220867A Cam
Materials (Body): Cast Iron
(Stem): Stainless Steel (Seat): Resilient
(Plug/Ball/Disc): Stainless Steel (Packing): Teflon
A |
M27552 |
|
|
|
|
|
|
|
|
Valve Size |
|
Flow Capacity |
|
|
|
|
|
|
|
|
Product Number |
(inch) |
DN |
(Cv) |
(Kv) |
Used With |
|
|
|
|
|
|
V5051A3004/U |
2 1/2 in. |
DN65 |
75 Cv |
64.5 kvs |
Q5001D/Modutrol IV Motor, or Q5020C/DCA |
|
|
|
|
|
|
V5051A3012/U |
3 in. |
DN80 |
116 Cv |
88 kvs |
Q5001D/Modutrol IV Motor, or Q5020C/DCA |
|
|
|
|
|
|
V5051A3020/U |
4 in. |
DN100 |
178 Cv |
125 kvs |
Q5001D/Modutrol IV Motor, or Q5020C/DCA |
|
|
|
|
|
|
V5051A3038/U |
5 in. |
DN125 |
318 Cv |
224 kvs |
Q5001D/Modutrol IV Motor, or Q5020C/DCA |
|
|
|
|
|
|
V5051A3046/U |
6 in. |
DN150 |
390 Cv |
224 kvs |
Q5001D/Modutrol IV Motor, or Q5020C/DCA |
|
|
|
|
|
|
556 |
customer.honeywell.com |
70-6910 |