Honeywell V5013R User Manual

INTERNAL THREADED END-CONNECTION

APPLICATION

Single seated control or shut-off valve for:

• hot water;

• chilled water;

• saturated steam;

• superheated steam;

• domestic hot water;

in heating, ventilation, air conditioning systems, and open circuits. Operated by

• electric linear actuators (e.g. ML6420/25, ML7420/25, M6421, and M7421) and

• pneumatic actuators (e.g. MP953).

V5013R

LINEAR VALVE PN16

PRODUCT DATA

FEATURES

• Brass body with internal threaded end connections

• Low seat leakage rate

• Self-adjusting packing

• Accurate positioning to ensure state-of-the-art

temperature control

• Directly-coupled electric and pneumatic actuators

for easy mounting

• Constant total flow throughout full plug travel

SPECIFICATIONS

Action: Stem up to close port A-AB Nominal pressure rating: PN16 Flow characteristic: equal percentage: port A-AB linear: port B-AB Rangeability: 50:1 Leakage rate: Stroke: 20 mm Valve body: Pipe connections: Internal threading as per ISO228 Material: Brass Dimensions: See Fig. 1 on page 3 Trim: Seat: DN15: stainless steel DN20...50: body integrated Plug: Brass Stem: Stainless steel Packing: Spring-loaded carbon fiber

Medium temperature and pressure: Water and steam

Max. temperature differential in alternating hot/cold water use:

≤0.05% of k

reinforced PTFE V-rings

2 to 120 °C max. 1600 kPa 120 to 170 °C max. 1490 kPa

60 K

V5013R

SIZES AND FLOW CAPACITIES

Table 1. Size and flow capacity (in m

Order Number Valve size kVS m3/h

V5013R1032 DN15 2.5 V5013R1040 DN15 4

V5013R1057 DN20 6.3 V5013R1065 DN25 10 V5013R1073 DN32 16 V5013R1081 DN40 25 V5013R1099 DN50 40

/h)

INSTALLATION

Water should meet VDI2035 requirements. Do not install valve with stem below the horizontal. Fluid flow must correspond with the arrow direction on the

valve body. The installation of a strainer is strongly recommended.

SPARE PARTS

Repair packing kit for red-brass models (old) – RG5 DN15...32: Order number 0901786 DN40...50: Order number 0901787 Repair packing kit for yellow-brass models (new) – DR DN15...50: Order number 0901787

CLOSE-OFF PRESSURE RATINGS

Electric Actuators

Table 2. Close-off pressure ratings (in kPa) of electric actuators

actuator valve size

type force DN15 DN20 DN25 DN32 DN40 DN50

ML6420 / ML6425 ML7420 / ML7425

M6421 / M7421 1800 N - - 1600 1600 1500 850

Pneumatic Actuators MP953

600 N 1600 1600 1000 700 460 260

Table 3. Close-off pressure ratings (in kPa) of pneumatic actuators MP953

actuator valve size

type spring range

MP953C5001 14...48 kPa MP953C5027

MP953A5005 MP953C5019 55...83 kPa

MP953C5068 14...48 kPa MP953C5084

MP953A5039 MP953C5076 55...83 kPa

MP953D5025 27...76 kPa MP953D5009

MP953B5003

27...76 kPa

55...83 kPa

air

pressure

0 kPa

115 kPa

closed seat DN15 DN20 DN25 DN32 DN40 DN50

upper

lower

upper

150

1600

800

1150 1600

860

1550 1600

1600 1600

310 530

950 380

650

1600 1550

1600 1600

1600

840

1480 1050

1490

180 350

620 240

420

1600 1030

1500 1600

1190

570 990

720

1490

200 370

130 240

1600

630 950

1470

750 340

600 440

920

100 220

130

1130

400 600

970 460

200 370

260 600

630 200

320 520

250

190 130

320

EN0B-0065GE51 R1105 2

+ 2 hidden pages