Honeywell V5013N Catalog Page
Flanged Globe Valves
A
A
B
C
BC
Y
1,2
Y
1
Y
1
Y
2
Y
2
1/2 (15)
3/4 (20)
1 (25)
1-1/4 (32)
1-1/2 (40)
2 (50)
3-1/4 (83)
3-1/4 (83)
4-1/16 (103)
4-3/16 (106)
4-3/4 (120)
5-1/4 (134)
1-9/16 (39.7)
1-9/16 (39.7)
1-9/16 (39.7)
1-9/16 (39.7)
1-13/16 (46.5)
1-13/16 (46.5)
2-9/16 (65)
2-9/16 (65)
2-5/8 (66.5)
2-7/8 (72.5)
3 (77)
3-5/16 (83.5)
VALVE
SIZE
STEM UP
4-3/16
(106)
5-15/16
(151)
M12901A
a
a
Y
2 WITH STEM EXTENSION FOR MP953C,E (8 IN. ONLY)
NOTE:
Y
DIMENSION IS WITH
STEM FULLY UP, NOT DOWN.
V5013N Three-Way Threaded Globe Valves
The V5013N is a three-way threaded globe valve that controls hot
water, cold water, and glycol solutions (up to 50 percent
concentration) in heating or cooling HVAC applications. The valves
are used for mixing service to direct flow from one or two inlets to
a common outlet in two-position or modulating control systems.
• Red brass body with NPT-threaded connections
• Stainless steel stem and brass plug
• Low seat leakage rating, < 0.05%
• Spring-loaded, self adjusting packing
• 50:1 rangeability per VDI/VDE 2173
• Constant total flow throughout full stem travel
• Accurate positioning to ensure state-of-the-art temperature control
• Sizes range from 1/2 inch to 2 inches
• Valves utilize direct mounting, electric or pneumatic valve actuators;
Q5001 linkage with Modutrol Motor; or Q5020/Q5022 linkages with
Direct Coupled Actuators to operate the valve
• Repack and rebuild kits available for field servicing
• Not suitable for combustible gases
Dimensions in inches (millimeters)
Valve Type: Globe Valve
Body Pattern: Three-way mixing, A-B-AB porting
Connection Type: Female NPT
Controlled Medium: Chilled or hot water with up to 50% Glycol;
not for use with steam or fuels
Leakage Rating: 0.05% of Cv
Maximum Safe Operating Pressure: 217 psi at 248 F (1500 kPa at 120
C)
Maximum Differential for Quiet Water Service: 20 psid (138 kPa)
Maximum Differential Pressure Ratings (Close-off): 240 psi (1655
kPa)
Ambient Temperature Range: 36 F to 248 F water (2 C to 120 C water)
Stem Travel: 3/4 in. (20 mm)
Bonnet Size: 1 3/8 in. (35 mm)
ANSI/ASME Rating: 150
Actuation: Must be purchased separately
Materials
(Body): Red Brass
(Stem): Stainless Steel
(Plug/Ball/Disc): Brass
(Packing): Teflon/EPDM
(Seat):
V5013N1030, 1048: Stainless Steel
V5013N1055, 1063: Integral Brass
V5013N1071, 1089, 1097: Brass
Approvals
CRN Number: 0C0861.9087YTN/0C0861.123
Valve Size Flow Capacity
Product Number
V5013N1030/U 1/2 in. DN15 2.9 Cv 2.5 kvs Linear (B-AB);
V5013N1048/U 1/2 in. DN15 4.7 Cv 4.0 kvs Linear (B-AB); Equal
V5013N1055/U 3/4 in. DN20 7.3 Cv 6.3 kvs Linear (B-AB);
V5013N1063/U 1 in. DN25 11.7 Cv 10 kvs Linear (B-AB);
V5013N1071/U 1 1/4 in. DN32 18.7 Cv 16 kvs Linear (B-AB);
V5013N1089/U 1 1/2 in. DN40 29 Cv 25 kvs Linear (B-AB);
V5013N1097/U 2 in. DN50 46.8 Cv 40 kvs Linear (B-AB);
552 customer.honeywell.com 70-6910
Flow Characteristic
Equal Percentage (A-AB)
Percentage (A-AB)
Equal Percentage (A-AB)
Equal Percentage (A-AB)
Equal Percentage (A-AB)
Equal Percentage (A-AB)
Equal Percentage (A-AB)
Valve
Action Used With(inch) DN (Cv) (Kv)
Mixing ML6984/ML7984; Q5020/DCA; Q5001/Modutrol IV Motor;
Mixing Q5020/DCA; ML6984/ML7984; Q5001/Modutrol IV Motor;
Mixing ML6984/ML7984; Q5020/DCA; Q5001/Modutrol IV Motor;
Mixing Q5020/DCA; ML6984/ML7984; Q5001/Modutrol IV Motor;
Mixing ML6984/ML7984; Q5020/DCA; Q5001/Modutrol IV Motor;
Mixing Q5020/DCA; ML6984/ML7984; Q5001/Modutrol IV Motor;
Mixing ML6984/ML7984; Q5020/DCA; Q5001/Modutrol IV Motor;
ML7420/ML7421A/ML7425; ML6420,21A,25
ML6420,21A,25; ML7420/ML7421A/ML7425
ML7420/ML7421A/ML7425; ML6420,21A,25
ML6420,21A,25; ML7420/ML7421A/ML7425
ML7420/ML7421A/ML7425; ML6420,21A,25
ML6420,21A,25; ML7420/ML7421A/ML7425
ML7420/ML7421A/ML7425; ML6420,21A,25
Loading...