Page 1
T7005, T7006, T7007, a
nd
rs
T7005
SPACE SENSOR
T7008 Platinum Senso
SPECIFICATION DATA
FEATURES
• Fast response
• Precise temperature
measurement
• EXCEL 5000
DeltaNet system compatibility
T7006
DUCT SENSOR
®
, DELTA, and
REMOTE BULB SENSOR
T7007
T7008
IMMERSION SENSOR
GENERAL
T7005, T7006, T7007, and T7008 Platinum Sensors (“Sensors”) monitor
temperatures in building management control applications, including Direct Digital
Control systems. They are designed for a variety of media such as air, liquid, and
steam and can be used with EXCEL 5000 Controllers, DELTA 540 and 541 Data
Gathering Panels, DeltaNet R7044 Excel Plus Controllers, and DeltaNet MicroCel™
and MacroCel™Controllers.
Each Sensor consists of a platinum-film resistance element on a ceramic chip and
is overlaid with protective glass to ensure long-term reliability. Platinum element
resistance varies directly with temperature change. Sensors are calibrated to a very
close tolerance by double laser trimming of the element. This method of calibration
eliminates field calibration.
Copyright © 1997 Honeywell Inc. • All Rights Reserved
74-2921-1
Page 2
T7005, T7006, T7007, AND T7008 PLATINUM SENSORS
DESCRIPTION
T7005, T7006, T7007, and T7008 Platinum Sensors
(“Sensors”) monitor temperatures in building management
control applications, including Direct Digital Control systems.
They are designed for a variety of media such as air, liquid,
and steam.
Dimensions in Inches (Millimeters):
3-1/8
(79.5)
SPECIFICATIONS
Models:
❑ T7005 Space Sensor:
The T7005 Space Sensor monitors temperature in a room
or area of a building. The platinum sensing element
provides fast response to temperature changes. Any
Honeywell T7000 Standard Series no display (blank)
cover can be used. Indicate cover selection when
ordering sensor.
T7006 Duct Sensor:
The T7006 Duct Sensor measures air temperature in a
duct. The platinum sensing element is in the tip of a
brass probe.
❑ Sensor with 11-7/8-in. (301.6-mm) probe
❑ Sensor with 4-3/8-in. (111.1-mm) probe
❑ T7007 Remote Bulb Sensor:
The T7007 Remote Bulb Sensor measures the
temperature in applications where other sensors are not
appropriate such as outdoor air temperature and strap-on
pipe sensing. The sensor can also be used in ducts where
standard duct sensors are not practical. The platinum
sensing element is in a sealed probe attached to an oil
resistant cable.
T7008 Immersion Sensor:
The T7008 Immersion Sensors detect temperatures of
heated or chilled water, or other fluids. The platinum
sensing element is in the tip of a sealed, corrosionresistant brass probe. The T7008 sensors have 1/2 in—14
NPSC straight pipe threads and mounts in a well for tank
or pipe installation.
❑ T7008A1042 High Temperature Sensor
❑ T7008A1059 Chilled Water Sensor-higher accuracy
sensing element, hermetically sealed to prevent
damage due to moisture from condensation.
2-1/8
(54)
2-1/8
(54)
3/8
(10)
1-13/16
(46)
T7006C: 11-7/8 (301.6)
T7006D: 4-3/8 (111.1)
2-5/8 (67)
1/2"-14 NPSL
STRAIGHT PIN
THREADS
1-3/8
(35)
T7005
3/8 (10)
T7006
T7007
5 (127)
T7008
3/8 (10)
4
(102)
34-1/2 (877)
(102)
4
2-1/8
(54)
2-1/8
(54)
C3963-3
74-2921—1
2
Page 3
T7005, T7006, T7007, AND T7008 PLATINUM SENSORS
Sensor Specifications:
Models
T7008 Immersion Sensor
Data
Application Room and area
Mounting Directly on wall Directly on duct Sun Shield/Bulb
Lead Wires Two 22 AWG (0.38 sq mm) wires for
Operating
Temperature
Ambient Humidity 95% rh, noncondensing 100% Condensing
Coefficient 4.8 ohms/F (8.6 ohms/K) — positive temperature coefficient
Sensing Element Platinum-Film Platinum-film in
Sensor
Resistance
T7005 Space
Sensor
air temperatures
low resistance splicing
35 to 149F
(1.7 to 65C)
3474 ohms at 75F (23.9C)
T7006C&D Duct
Sensor
Air temperature
in ducts
–40 to 160F
(–40 to 71C)
brass tube
T7007 Remote
Bulb Sensor High Temperature Chilled Water
Outdoor air and
pipe temperature
sensing
Holder for outdoor
air use, or Strapon Kit or clamp on
pipe sensing
Oil resistance
cable with two 18
AWG (0.81 sq mm)
wires for low
resistance splicing
Platinum-film Platinum-film in brass tube
High temperature
fluid system such
as hot water
1/2 in. — NPSC straight pipe threads
into well
Two 18 AWG
(0.81 sq mm) wires
for low resistance
splicing
70 to 392F
(–21 to 200C)
Fluid systems
requiring high or
accuracy such as
chilled water or where
condensation in the
sensor may occur
Two 18 AWG
(0.81 sq mm) wires for
low resistance
splicing
20 to 225F
(6.7 to 108C)
Accessories:
T7005 Space Sensor:
Cover, Satin Chrome:
❑ Vertical Mount with Logo, 14004406-300
❑ Horizontal Mount with Logo, 14004406-400
❑ Vertical or Horizontal no Logo, 14004406-800
Cover, Beige:
❑ Vertical Mount with Logo, 14004407-300
❑ Horizontal Mount with Logo, 14004407-400
❑ Vertical or Horizontal no Logo, 14004407-800
❑ Finish Plate, Black: 14002136-004
❑ Finish Plate, Beige: 14002136-005
❑ Wall Mounting Ring: 14004458-001
❑ Adapter Plate: 14001496-001
❑ Standoff Ring: 14000885-005
T7007 Remote Bulb Sensor:
❑ Installation Kit (all pipes): 14503800
❑ Installation Kit (uninsulated pipe): 14503801
❑ Sun Shield/Bulb Holder: 107323A
T7008 Immersion Sensor:
❑ Copper Well: 23904A
❑ Heat Conductive Compound (required for use with well):
107408 (4 oz) or equivalent
3
74-2921—1
Page 4
Home and Building Control
Honeywell Inc.
Honeywell Plaza
P.O. Box 524
Minneapolis MN 55408-0524
Honeywell Latin American Division
Miami Lakes Headquarters
14505 Commerce Way Suite 500
Miami Lakes FL 33016
Home and Building Control
Honeywell Limited-Honeywell Limitée
155 Gordon Baker Road
North York, Ontario
M2H 3N7
Honeywell Europe S.A.
3 Avenue du Bourget
1140 Brussels
Belgium
Honeywell Asia Pacific Inc.
Room 3213-3225
Sun Hung kai Centre
No. 30 Harbour Road
Wanchai
Hong Kong
74-2921—1 Rev. 4-97
Printed in U.S.A. on recycled paper
containing at least 10% post-consumer paper fibers
Helping You Control Your World
®
Loading...