A Radiator Thermostat is installed onto a Thermostatic Radiator Valve Body (TRV body). The combination of both, the
Thermostatic Radiator Valve (TRV), controls the room temperature by adjusting the flow of hot water through a radiator.
TRVs are installed in water-based heating systems on the
supply or, less commonly on the return connection of radiators.
Radiator thermostats of this type fulfill the European Standard
EN 215 when used with certified Honeywell TRV bodies.
Honeywell radiator thermostats with Honeywell (HW) M30 x 1.5
connection are suitable for all TRV body and radiator inserts
with M30 x 1.5 connection and 11.5 mm closing dimension.
Features
• Conforms with M30 x 1.5 connection to European standard EN 215
• Equipped with liquid sensor
• Memory-clip
• Easy to equip with range stoppers
Design
The radiator thermostat consists of:
• Handwheel with lid and socket
• Honeywell HW M30 x 1.5 connection and 11.5 mm closing
dimension
• Sensor with support cage
• Internal or remote sensor
• Liquid sensor
• Spindle assembly
• Connection nut
Materials
• Handwheel socket and lid made of plastic, white to RAL9016
• Socket made of black plastic
• Socket, support cage and spindle assembly made of plastic
• Sensor filled with liquid
• Connection nut made of nickel-plated brass
Specifications
Thermostat
connection
Setpoint range0 - ❄ - 1..5(with zero-position)
Temperature range 1...28°C (34...82°F)(with zero-position)
Closing dimension 11.5 mmHW type
NOTE: Zero-position is also thermostatically controlled -
Radiator thermostats of this type control the TRV body. The air
passing around the sensor of the radiator thermostat causes
the sensor to expand when the temperature rises. The
expanding sensor closes the TRV accordingly. When the room
temperature changes the TRV opens or closes proportionally.
Only the amount of water required to maintain the room temperature set on the radiator thermostat is allowed to flow through
the valve.
Honeywell y Subject to changeEN0H-2004GE25 R0109
T7000 - 2080
Dimensions and Ordering Information
71 closed
78 open
ø 60
Fig. 1. 2080 with internal sensorFig. 2. 2080 with remote sensor
NOTE: All dimensions in mm unless stated otherwise.
Table 1. Available versions and OS-Nos (OS=Ordering Specification)
TypeEN215
certification
Zero-
position
Limited to
position 3
(’0’)
2080 with internal sensor
•M30 x 1.5-white❄ - 1..5T7001
••M30 x 1.5-white❄ - 1..3T7001B3
••M30 x 1.5-white0 - ❄ - 1..5T7001W0
2080 with remote sensor
•M30 x 1.50.8 mwhite❄- 1..5T700108
•M30 x 1.52.0 mwhite❄- 1..5T700120
•M30 x 1.55.0 mwhite❄ - 1..5T700150
•M30 x 1.50.8 mwhite❄ - 1..3T700120B3
••M30 x 1.50.8 mwhite0 - ❄ - 1..5T700108W0
••M30 x 1.52.0 mwhite0 - ❄ - 1..5T700120W0
98
35
ConnectionCapillary
tube
length
71 closed
78 open
ø 60
ColourCapOS-No.
EN215 Information
All radiator thermostats of this type with M30x1.5 connection in connection with certified Honeywell TRV bodies conform to the
European Standard EN215.
Table 2. Comparison of radiator thermostats of this type specs and EN 215 requirements
2080
without zero-position
Min. setpoint temperature6°C (43°F)6°C (43°F)5...12°C (41...54°F)
Max. setpoint temperature28°C (82°F)28°C (82°F)≤ 32°C (90°F)
Hysteresis0.4K0.5K≤ 1.0K
Influence of differential pressure0.3K0.6K≤ 1.0K
Influence of static pressure0.5K0.5K≤ 1.0K
Influence of heating medium0.8K0.6K≤ 1.5K
Response time 31 min 12 min≤ 40 min
NOTE: All °C- and °F-values specified at ideal incident flow. This can differ from stated values depending on installation position
and air flow.
NOTE: Influence of differential pressure depends on TRV body used.
EN0H-2004GE25 R01092Honeywell y Subject to change
2080 with remote sensor,
without zero-position
EN215
requirements
Installation Examples
Fig. 3. Correct and false installation positions for radiator thermostats with internal sensor
T7000 2080
Fig. 4. 2080 with remote sensor
Setpoint
Table 3. Radiator thermostats of this type with zero-posi-
tion ('0')
Setpoint0❄12345
°C161116212528
°F34435261707782
Table 4. Radiator thermostats of this type without zero-
position ('0')
Setpoint❄12345
°C6 1116212528
°F435261707782
Table 5. Radiator thermostats of this type without zero-
position ('0')
Setpoint❄123
°C6 111621
°F43526170
NOTE: All °C and °F-values approximate. Heating can freeze
when radiator thermostats with zero-position are set
at position '0'. Zero-position is also thermostatically
controlled - when temperature falls the TRV may
open.
Please Note:
• To avoid stone deposit and corrosion the composition of the
medium should conform with VDI-Guideline 2035
• Additives have to be suitable for EPDM sealings
• System has to be flushed thoroughly before initial operation
with all valves fully open
• Any complaints or costs resulting from non-compliance with
above rules will not be accepted by Honeywell
• Please contact us if you should have any special requirements or needs
Honeywell y Subject to change3EN0H-2004GE25 R0109
T7000 2080
Accessories
Theft-protection ring
with Allan screwsTA2080A001
with double-punch screwsTA2080A002
Screwdriver for double-punch screws
Decoring for connection nut
white (RAL9016)
10 pair, 20 pieces
white (RAL9016)
1 pair, 2 pieces
chrome
10 pair, 20 pieces
chrome
1 pair, 2 pieces
TA2080B002
TA1000A001
TA1000A011
TA1000A002
TA1000A022
Adapter
DA-Adapter from Danfoss
TA1010DA01
snap connection RA to
M30 x 1.5
Adapter
HZ-Adapter from M28 x 1.5
TA1010HZ01
with 9.5 mm closing dimension to M30 x 1.5 with