Thermostatic Radiator Valves and Actuators
CAPILLARY TUBE LENGTH
6-1/2 FT (2m) OR 16 FT. (5m)
M12926
2-5/32
(55)
2-1/8 (54)
2-31/32 (75)
1-13/16
(46)
T100B
CAPILLARY TUBE LENGTH
4-1/2 FT (1.4 m)
M12927
CAPILLARY TUBE
LENGTH 4-1/2 FT (1.4 m)
2-31/32 (75)
2-5/32
(55)
2-1/8 (54)
1-13/16
(46)
T100C
T100 Standard Capacity Thermostatic Radiator Actuators
Allow automatic temperature control in two-pipe steam or hot
water systems for free standing radiators, convectors, and other
heating units with standard capacity requirements. Provide
comfort and energy savings at affordable prices.
• Continually monitor and adjust room temperature for consistent
comfort and relief from under-heating and overheating.
• Valve seat disc, which is made of resilient material (EPDM), ensures
tight shutoff on steam or hot water systems.
• Nickel-plated brass casted body with working parts in cartridge
insert for ease of service.
• Controls include sensor, setpoint dial and valve actuator;
components may be integral or connected by capillary tubes.
• Require no electrical connections.
• All working parts are replaceable using service tool (MT100C1016)
while valve remains in service, in-line, under pressure.
• Valves normally open without control mounted.
• 30 mm collar diameter
Controls
Hydronic
Dimensions in inches (millimeters)
CAPILLARY TUBE
LENGTH 6-1/2 FT (2 m)
T1002W
TOP
2
(50)
3
(77)
T100F
3-5/16
(84)
MAX.
2-1/8 (54)
2 (50)
M12928
M34804
70-6910 239
Thermostatic Radiator Valves and Actuators
Typical Installation
M12935
Application: Standard Capacity Thermostatic Radiator Actuator
Used With Valve: V100, V2000
Collar Diameter: 30 mm
Product Number Application Type
T1002W0NA A self-contained control with
T100B1035 A control with combined remote
T100B1043 A control with combined remote
T100C1026 A control with remote setpoint
T100F1395 A control with remote
sensor, setpoint dial and valve
actuator in one unit. Mounts
horizontal. Not for use inside
enclosures or where airflow
around sensor is restricted.
Adjustable limits.
setpoint and sensor mounted on
wall. Connected by a capillary
tube to an actuator, which is
mounted on the valve body.
setpoint and sensor mounted on
wall. Connected by a capillary
tube to an actuator, which is
mounted on the valve body.
and sensor mounted with
setpoint dial on outside of
heating cabinet; sensor
mounted beneath heating coils
in cold air return. Dual capillary.
temperature sensing and
integral set point. Adjustable
limits.
Capillary
Length
——43 F to
6 1/2 ft 2 m 48 F to
16 ft 5 m 48 F to
Two 4
1/2 ft
6 ft. 8
in.
Temperature
Range Sensor Setpoint
79 F
79 F
79 F
Tw o
48 F to
1.4 m
79 F
2 m 43 F to
79 F
Replaces Comments(ft) (m) (F) (C) Integral or Remote
6 C to
Integral Integral American Steam - 02-100-00.
26 C
9 C to
Remote Remote American Steam - 02-300-00.
26 C
9 C to
Remote Remote Taco - 5207.
26 C
9 C to
Remote Remote American Steam - 02-320-00.
26 C
6 C to
Integral Integral American Steam - 02-120-00.
26 C
Taco - 5202.
Danfoss RA2000 - 013G8200.
Ammark - 72.
TM Macon - TM B22000.
NT Macon - NTB B24000.
(in combination with V2000)
Taco - 5206.
Danfoss RA2000 - 013G8262.
Ammark - 76.
TM Macon - TML B42000.
NT Macon - NTL B45000.
(in combination with V2000)
Danfoss RA2000 - 013G8265.
Ammark - 76L.
(in combination with V2000)
Taco - 5211.
Danfoss RA2000 - 013G8233.
Ammark - 74.
TM Macon - TMLZ B52000.
NT Macon - NTL B55000.
(in combination with V2000)
Taco - 5203.
Danfoss RA2000 - 013G8202.
Ammark - 73.
TM Macon - TMZ B32000.
NT Macon - NTZ B35000.
(in combination with V2000)
Adjustable
Limits
—
—
—
Adjustable
Limits
240 customer.honeywell.com 70-6910