Honeywell SL22, SL-HB-C-H, SL-HB-C, SL42 User Manual
Captuvo™ SL22/42 HomeBase
Quick Start Guide
CAPTUVO22-42-HB-QS Rev A
6/14
Overview
The HomeBase is a single charging cradle that can power one
®
iPod touch®/Apple iPhone®sled and charge its battery in four
Apple
hours for non-healthcare sleds and six hours for healthcare sleds. If
the iPod touch/iPhone is inserted into the sled, it will be charged
along with the sled.
We recommend use of Honeywell peripherals, power cables,
!
and power adapters. Use of any non-Honeywell peripherals,
cables, or power adapters may cause damage not covered by
the warranty.
Unpacking the HomeBase
Open the shipping box and inspect the package to see that the following standard items are included:
• One HomeBase (Models: SL-HB-C or SL-HB-C-H)
• One wall adapter
• Quick Start Guide
These items are needed to operate the HomeBase. If any items are
missing or anything appears to be damaged, contact your Customer
Account Representative. Keep the original packaging in case you
need to return the HomeBase for service or to store the HomeBase
while not in use.
Convenient Storage
Since charging terminates when the battery has a full charge, the
HomeBase is a safe and convenient storage receptacle for your
Captuvo sled.
Front Panel
Back Panel
Power Supply Connector
Power
The terminal requires 5 Volts DC input for battery charging; the
power adapter on the power cable converts the voltage from the
power source to 5 volts DC. Use only a UL Listed power supply,
which has been qualified by Honeywell with output rated at 5VDC
and 3A amps with the device.
Honeywell recommends that you leave the HomeBase connected to
its power source at all times, so that it is always ready to use.
Connecting Power to the HomeBase
1. Plug the wall adapter cable into the power connector on the back
panel of the HomeBase.
2. Plug the A/C power cord into a standard wall outlet.
The HomeBase is ready to begin charging the sled/iPod touch/
iPhone.
Loading...