Honeywell NFPA 1951, NFPA 1977, NFPA 1992, NFPA 1999 User's Information Manual

NFPA 1951, NFPA 1977, NFPA 1992 and
NFPA 1999 GARMENTS
User Information Guide
Protective Garments for:
• Technical Rescue Incidents (NFPA 1951)
• Wildland Fire Fighting (NFPA 1977)
• Liquid Splash Protection During Hazardous Materials Emergencies (NFPA 1992)
• Emergency Medical Operations (NFPA 1999)
ONLY THE END USER SHALL REMOVE THIS INFORMATION PRIOR
TO USING THESE GARMENTS
DANGER
YOU MAY DIE OR SUSTAIN SERIOUS INJURY IF YOU DO NOT HAVE THE SPECIAL TRAINING AND KNOWLEDGE TO
CORRECTLY USE YOUR GARMENT AND/OR HAVE NOT READ THIS USER GUIDE. IF YOU WERE NOT GIVEN A
COMPLETE GUIDE OR LOSE YOUR USER GUIDE, ALERT YOUR ORGANIZATION OR CONTACT HONEYWELL
FOR A REPLACEMENT.
• DO NOT USE YOUR PROTECTIVE GARMENT IF YOU HAVE NOT READ AND UNDERSTOOD THIS GUIDE AND THE LABEL ON YOUR GARMENT, AND YOU HAVE NOT BEEN PROPERLY TRAINED AND SUPERVISED IN ITS USE.
• THIS GARMENT MUST BE WORN AS PART OF A COMPLETE PROTECTIVE ENSEMBLE. IT IS THE RESPONSIBILITY OF YOUR DEPARTMENT TO DETERMINE THE SUITABILITY OF THIS GARMENT FOR ITS INTENDED USE AND WHEN THIS GARMENT MUST BE WORN TOGETHER WITH OTHER ENSEMBLE ELEMENTS, AND TO ENSURE THAT THE SELECTED ENSEMBLE ELEMENTS WORK TOGETHER TO PROVIDE THE INTENDED PROTECTION.
• YOU MUST ENSURE THAT YOUR GARMENT PROPERLY FITS AND IS PROPERLY WORN FO EFFECTIVE PROTECTION.
• YOU MUST PROPERLY INSPECT, CARE FOR, AND MAINTAIN THIS GARMENT WITH THIS GUIDE IN ORDER FOR THE GARMENT TO PROVIDE EFFECTIVE PROTECTION.
User Information Guide – Protective Garments for NFPA 1951, NFPA 1977, NFPA 1992 and NFPA 1999
Introduction
This guide addresses Honeywell garments for both utility and rescue and recovery technical rescue incidents (NFPA 1951), wildland fire fighting (NFPA 1977), liquid splash protection during hazardous materials emergen­cies (NFPA 1992), and emergency medical operations (NFPA 1999). It is important to check the label to deter­mine the type of emergency operations and standards to which your garment has been certified. Where there are differences related to selection, care, and maintenance of the different types of garments, this information is high­lighted.
Your protective garment is intended to provide limited protection to your torso, arms, and legs as part of a properly selected and configured protective ensemble during technical rescue operations, wildland fire fighting, liquid splashes during hazardous materials emergencies, or emergency medical operations, as indicated on the garment product label. While your protective garment is designed to provide protec­tion against a number of fireground and/or other emergency operations hazards, your
not protect you against all exposures and under all conditions, even when
worn properly.
This user information guide provides information and instructions related to the selection, use, care, and mainte­nance of your protective garment. How­ever, this guide does not tell you when and under what circumstances you should wear your protective garment. Rather, this guide tells you how to wear your protective garment and provides an understanding of the limitations of your garment and how this garment may or may not protect you. Determin­ing the suitability of your protective gar­ment for specific emergency operations rests with your department or employer, who has the legal responsibility to conduct a hazard assessment and decide if your protective garment provides appropriate protection against identified hazards.
protective garment will
While this guide provides you basic information to adequately care for and maintain your protective garment, there are certain additional proce­dures – such as advanced inspection, advanced cleaning, decontamination, special incident procedures, and retirement – that should be performed only by trained and qualified person­nel. Information and instructions or these additional procedures are pro­vided on our website. Go to www.HoneywellFirstResponderSer­vices.com.
Pre-use Information
General Construction and Features –
Your protective garment has been man­ufactured to comply with one or more of the following standards:
NFPA 1951 Standard on Protective
Ensembles for Technical Rescue Incidents
NFPA 1977 Standard on Protective
Clothing and Equipment for Wildland Fire Fighting
NFPA 1992 Standard on Liquid Splash-
Protective Ensembles and Clothing for Hazardous Materials Emergencies
NFPA 1999 Standard on Protective
Clothing for Emergency Medical Operations
Garments are provided either as sets of coats and pants or as full-body covealls. These garments may be constructed of one or more layers, and one of the layers may be intended to provide a barrier against liquids. Each type of garment may include different features and options such as different types of closure systems, reinforcements (elbows, knees, cuff edges), attached or detachable hoods, pockets, high visibility materials, side take-up straps, drag rescue devices, and different types of suspenders. Specific informa­tion about the materials and features of available garments is provided on the Honeywell website at www.Honeywell­FirstResponder.com.
Safety Considerations and Limitations of Use – It is critically
important that you do not use this
protective garment until you have read and understood this entire guide and the labels provided on your protective garment. In order to reduce – but not eliminate – your risks, do not wear this protective garment unless:
You Understand All Labels, This
Guide, and Applicable Standards:
You have read, fully understood, and strictly followed this guide and all labels for this garment, the applicable NFPA standard, and applicable national, state/provincial, and local regulations pertinent to emergency operations.
Your Use Is in Accordance with
Applicable Standards and Regula­tions: Your use of this protective
garment is consistent with NFPA1500 Standard on Fire Department Occupational Safety and Health Program; with Title 29, Code of
Federal Regulations Part 1910.132 and General Requirements of Subpart I, “Personal Protective Equipment”; with Part 1910.1030, “Blood-Borne Pathogens”; and with any specific regulations that pertain to your local area.
Need for Hazard/Risk Assessment: Your department, organization, or employer has conducted a hazard/ risk assessment and determined that this garment provides an acceptable level of protection for the particular emergency operations consistent with applicable national, state/provincial, and local regulations.
Your Garment Fits Properly: Your garment must be appropriately sized to provide an adequate range of motion and must permit you to complete required tasks without overexertion.
Limitations of Protection: You have been trained and understand that not all garments provide protection from all hazards, and you have been trained and understand how to select and properly use the appropriate garment to meet the expected exposure.
Heat Stress: Wearing your protective garment together with other ensemble elements may increase your risk of heat stress, which may cause heart
User Information Guide – Protective Garments for NFPA 1951, NFPA 1977, NFPA 1992 and NFPA 1999
attack, stroke, dehydration, or other health-related conditions. At the first sign of heat stress, immediately seek medical help.
Burn Injury: If designed for thermal protection, your protective garment will not protect you from all burns and injuries. If your protective garment is exposed to radiant, convective, or conductive heat, or comes in contact with a hot environment or hot object, you may be burned underneath the protective garment with no warning and no sign of damage to the protec­tive garment. If your protective garment is not flame resistant, do not wear your garment in any environment where you expect to be exposed to flame, high heat, or any other thermal hazard.
Heat Sensation: Your protective garment will lower your ability to feel heat. Do not be misled by the absence of heat or discomfort underneath your protective garment. Even though you do not feel heat or discomfort, you can be burned or injured suddenly and without warning. If you feel heat or some slight discom­fort or unusual sensation under your protective garment, you may already have been burned or are about to be burned. Be constantly alert to the possibility of exposure to heat and other hazards.
Barrier Protection: If your protective garment has a barrier, it will provide only limited liquid integrity and only when worn correctly and in combina­tion with other suitably chosen ensemble elements. Water and other liquids may still enter through the top, bottom, or closures of your protective garment and may expose you to liquid contaminants. The moisture barrier has not been evaluated for all chemi­cals that can be encountered during fire-fighting operations and informa­tion that the effects of chemical expo­sure on the moisture barrier are to be evaluated per the inspection proce­dures in NFPA 1855. Your protective garment may not protect you from all chemical, radiological, or biological hazards which can cause death, injuries, diseases, and/or illnesses. Furthermore, this garment does not offer any protection from hazardous vapors or gases, liquefied gases, or
cryogenic liquids. Ensure that you have proper interfaces between your protective garment and the other elements in your ensemble such as helmets, hoods, respirator facepieces, gloves (with protective coats), and footwear (with protective pants). There must also be sufficient overlap between your protective coat and pants (see Adjustment for Fit and Interface Issues under Wearing Instructions).
Other Hazards: Your protective garment – wet or dry – may not protect you from electrical shock. Your protective garment will not protect you from all physical hazards. Your protective garment may be penetrated, cut, or torn by sharp surfaces or objects. Your garment may also wear through when in repeated or prolonged contact with rough surfaces. Your garment will not offer any protection against ballistic hazards or objects propelled at high velocities. Your garment will hinder your movement and may not allow you full motion to perform all required fireground functions. The bulk of your garment together with other ensemble elements may not permit you to negotiate confined spaces or narrow passages without difficulty. If you fall into open water, your garment may prevent you from being able to swim. If you are operating in areas of vehicular traffic or moving machinery, your garment may not offer sufficient visibility to be seen, and you may be struck by moving vehicles or equip­ment. You must be constantly vigilant of the hazards to which you may be exposed and your garment limitations in protecting against these hazards. Do not use your protective garment if it is contaminated, cut, torn, punc­tured, worn, abraded, or altered from its original condition.
Need for Complete Ensemble: This garment is effective only when properly worn, accounting for a proper interface with the other elements of your protective ensemble. A complete ensemble for most emergency opera­tions includes, as a minimum, protec­tive garments, a protective helmet, protective gloves, protective footwear, respirator, and other personal protec­tive equipment that has been certified
to the appropriate standard. Ensem­bles may also include hoods, eye and face protection, and other items needed to provide complete protection.
Recommended Undergarments: If you are involved in any operations where the potential exists for flame or high heat exposure, wear only garments that are constructed of 100% natural fibers underneath your protective garment.
Proper Care and Maintenance: This garment must be properly inspected, maintained, and cared for by you and your department, organization, or employer consistent with these instructions and the applicable national, state/provincial, and local regulations. Your garment must be free of soiling, contamination, damage, and any alteration that would compromise the protection it provides in its original condition. Damage and contamination of this garment may warrant its disposal.
Shelf Life: Your garment has a shelf life of 10 years if unused and properly maintained over that period.
Warranty: This garment is NOT warranted to be fit for a particular purpose. Read carefully the warranty at the end of this guide. If labels in the garment are missing or become unreadable, contact Honeywell for instructions on obtaining a copy of the label information.
Marking Recommendations – Do not attempt to alter or modify your garment. For identification purposes, you may mark your protective garment on the interior using an indelible marker, if permitted by your department or organization. Do not write over or obscure information on the product label.
Testing and Assessment of Perform­ance – Your protective garment and the
materials and components used in its construction have been evaluated for a number of performance properties that are based on the requirements of the specific NFPA standard(s) for its certifi­cation. These properties may include, but are not limited to, flame and heat protective performance, barrier proper­ties, various physical properties, clean-
Loading...
+ 5 hidden pages