Honeywell L-VCP06D, L-VCP06D-BK, L-VCP06D-W Series Manual

76. 5mm

Φ160 mm

Φ140 mm

1

Installation/Configuration Notes

Mounting

Power setting

Dimensions in mm

Clear and intelligible audio performance
Stylish and unobtrusive design
Simple power settings
Compact and high strength fire resistant ABS plastic
Flush-mounting system for fast and easy installation
Environment friendly

Complying with AS7240.24,Type A

Technical Specifications

Electrical

Max power
Rated power
Power tapping
Sound pressure level
at 1W/4m,(100Hz~10kHz)

frequency response(-10dB)

Rated input voltage
Rated impedance
Connection

Mechanical

Dimensions
Hole cut-out size
Weight

Speaker size
Color
Grill

Surface Mount Box

Φ160x76.5mm

Φ140mm

0.7kg (speaker)

0.5kg (surface mount box)
4 inch

9 W
6 W
6/3 /1.5 /0.75/0.375(W)

79 dB

200Hz~15KHz (speaker)

100 V

1.7/3.3/6.7/13.3/26.7kΩ
unique terminal housing

White RAL 9003 / Black RAL 9004

Environmental

Operating temperature

IP Rating

Storage temperature
Relative humidity

-25℃ to +55℃

Type A(AS7240.24) / IP21

-40℃ to +70℃
<95%

Φ280x75mm

Powder
coated
steel

Full-range 4” ceiling loudspeaker, which features fi ve
power taps at 100V line for 6W, 3W, 1 .5 W, 0.75W and

0.375W outputs. An optional surface mount box is
available for solid ceiling or wall installation.
L-VCP06D-W provides a general application ceiling
mount speaker in white finish.

L-VCP06D-BK provides a black version of L-VCP06D-W
L-SMB-W provides an optional surface mount bo x fo r
L-VCP06D-W i n wh it e finish for solid ce il in g or wall

installation.
L-SMB-BK provides a black version of L-SMB-W.

The reference axis is perpendicular to the centre point of the front grille
The reference plane is perpendicular to the centre of the reference axis
The horizontal plane is perpendicular to the centre of the reference plane
The spec/data was measured using a standard baffle mounting in an anechoic
chamber as described in EN54-24

DoP No.: CPR-DoP- 0180012

For more information , please refer to our website www.honeywell.com

frequency response(-10dB)

200Hz~15KHz

(Sp eaker i nstal led wit h surfa ce moun t box)

L-VCP06D Series

Ceiling Loudspeaker

1008

1008-CPR-MC 69258358 0001

18

The assembly is quickly installed into the hole on the
ceiling or surface mount box secured by two built-in
spring ceiling locking clamps (It’s suitable for ceilings
with a thickness of 9mm to 25mm). The spring locking
clamps are provided with protective rubber to protect
soft ceiling material.

WARNING: Installation should be performed by
competent persons in accordance with the
relevant standards as required for the
installation. Honeywell Ltd accepts absolutely
no liability for the suitability or placement of the
speakers within an installation.

The unit has a unique terminal block with screw
connections suitable for loop connection. Five primary
taps are provided on the matching transformer to allow
selection of 6W, 3W, 1.5W, 0.75W, 0.375W.

Complying with EN54-24,Type A

IP21C rated

SPL(1W/1m,100Hz~10kHz)
SPL(6W/4m,100Hz~10kHz)

91 dB
86 dB

Installation Instructions

2100049022

Frequency Response

3.

Connections

100V Amplifier

L-VCP06D L-VCP06D

End of line Device
(if required).See
amplifier documentation

1.

ceiling installation

surface installation

2.

Circuit Diagram

4.

COM

6W

3W

1.5W

0.75W

0.375W

+

-

+

-

2.2uF/100V

INPUT 100V

Spe aker

Spe aker in stall ed with s urfac e mount b ox

Dispersion angles

1/3 oct. pink noise

1/3 oct. pink noise

1/3 oct. pink noise

1/3 oct. pink noise

500 Hz

1kHz

2kHz

4kHz

Horizontal Vertical

180° 180°

150° 150°

180° 180°

90° 90°

+

-

Service Contact: [e-mail]
www.honeywell.com
© 2017 Honeywell International Inc. All rights reserved.
Data subject to change without notice

Life Safety A/V (Guangzhou) Co. Limited

2

Push up the loudspeaker until the upper part of spring
well stick into the hole, and then continually push the
loudspeaker, spring will automatically restore and
compress the loudspeaker into position.

Press up the spring and interpose into the hole in the
ceiling or surface mount box.

Remove the backbox, then connect the cable to the
unique terminal block and select the output power.

Cut out a hole in the ceiling measuring140 mm diameter,
or install with the surface mount box.

250V /5A,130℃

~

100V

100V

COM

COM

Fre quenc y Respo nse at 1W /4m , 1/3 o ct smoo thing

L-VCP06D Series Ceiling Loudspeaker EN_1.0

50H z 100 20 0 500 1K 2K 5K 10K

dBSP L

20

30

40

50

60

70

80

90

100

110

120

20K