Honeywell LP-1200 Data sheet

Colorimetric Gas Detection

Tubes & Pump

On-the-spot, compound-specific measurement
of gases and vapors

Honeywell colorimetric gas detection tubes enable quick,

on-the-spot measurement of a wide range of toxic and combustible

gases and vapors. Honeywell tubes are easy to read, and provide

a sharp, clear color change directly corresponding to the

concentration of gas present. Honeywell tubes are compatible with

the Honeywell piston hand pump, a reliable way to draw samples of

an exact volume required for the most accurate measurements.

• Quick, accurate, low-cost
measurements

• Easy to read, with sharp, clear
color change

• No calibration needed

KE Y FE ATU R E S

Colorimetric Tubes

(See Colorimetric Tubes Part Numbers on back page)

• Wide assortment of tubes available to detect over
300 gases and vapors

• Easy to use, even in multiple layers of gloves

• Easy-to-read with sharp, clear color change

• No calibration or other maintenance required

APPLICATIONS

• Oil and gas

• Chemicals and petrochemicals

• Agriculture and pest control

• Food and beverage production

Hand Pump (H-LP-1200)

(Piston Hand Pump Kit Part Number: H-010-0001-000)

• Ergonomic, durable hand pump

• Solid metal construction with lifetime warranty

• Springless piston design accurately draws
50 or 100 cc volumes

• Environmental protection

• Fire service

• HazMat response

• National security

First responder uses Honeywell Colorimetric Tubes
and Hand Pump to measure VOC levels inside a barrel.

Colorimetric Gas Detection Tubes & Pump

On-the-spot, compound-specific measurement of gases and vapors

SPECIFICATIONS

Type

Acetone

Amines

Ammonia

Benzene

1,3-Butadiene

n-Butane

Carbon Dioxide

Carbon Monoxide

Chlorine

Chlorine Dioxide

Diesel & Jet Fuel

Ethanol

Formaldehyde

Gasoline

Hydrocarbons

Hydrogen Chloride

Hydrogen Cyanide

Hydrogen Fluoride

Honeywell Analytics

405 Barclay Blvd.
Lincolnshire, IL USA 60069
Toll free: [phone]
Fax: [phone]

Part Number

H-10-111- 4 0 0.1 to 2% 0.05 to 4%

H-10-132-10 0.5 to 10 ppmv 0.25 to 20 ppmv

H-10-100-05 1 to 30 ppmv 0.5 to 60 ppmv

H-10-10 0 -10 5 to 100 ppmv 2.5 to 200 ppmv

H-10-10 0 -12 10 to 260 ppmv 5 to 520 ppmv

H-10-10 0 -15 25 to 500 ppmv 12 to 1000 ppmv

H-10-100-40 1 to 15% 0.5 to 30%

H-10-101- 01* 0.5 to 10 ppmv

H-10-101-10 * 5 to 40 ppmv

H-10-101-2 0 5 to 100 ppmv 2.5 to 200 ppmv

H-10-135-04 0.5 to 5 ppmv 0.25 to 10 ppmv

H-10-137-3 0 25 to 1400 ppmv 12.5 to 2800 ppmv

H-10-10 4-3 0 300 to 5000 ppmv 150 to 10,000 ppmv

H-10-104-40 0.05 to 1% 0.025 to 2%

H-10-10 4-45 0.25 to 3% 0.125 to 6%

H-10-10 4-50 1 to 20% 0.5 to 10%

H-10-10 4-60 5 to 40% 1.25 to 20 %

H-10-10 2-18 5 to 100 ppmv

H-10-10 2- 20 5 to 100 ppmv 2.5 to 200 ppmv

H-10-10 2- 3 0 20 to 500 ppmv 10 to 1000 ppmv

H-10-10 2- 45 0.2 to 4% 0.1 to 8%

H-10-10 6 -10 0.5 to 8 ppmv 0.25 to 16 ppmv

H-10-10 6 -2 0 5 to 100 ppmv 2.5 to 200 ppmv

H-10-130-10 0.25 to 15 ppmv 0.05 to 30 ppmv

H-10-14 3-10 0.5 to 25 ppmv N/A

H-10-141- 3 0 100 to 2000 ppmv 50 to 200 ppmv

H-10-121-05 0.1 to 5 ppmv 0.8 to 40 ppmv

H-10-138-3 0 30 to 1000 ppmv 15 to 2000 ppmv

H-10-110 -30 50 to 1000 ppmv 25 to 2000 ppmv

H-10-10 8-09 1 to 20 ppmv 0.5 to 40 ppmv

H-10-10 8-10 * 1 to 20 ppmv

H-10-10 8-2 2 20 to 500 ppmv 10 to 1000 ppmv

H-10-126-10 2.5 to 60 ppmv 1.25 to 120 ppmv

H-10-10 5-10 0.5 to 20 ppmv 0.25 to 40 ppmv

Standard Range Extended Range

0.25 to 30 ppmv

selective

2.5 to 200 ppmv

selective

2.5 to 300 ppmv

selective

0.5 to 40 ppmv

w/ desiccant

Type

Hydrogen Sulfide

MEK

Mercaptans

Methyl Bromide

Nitric Acid

Nitrogen Dioxide

Nitrogen Oxides

Ozone

Phenol

Phosphine

Sulfur Dioxide

Toluene

Trichloroethylene

Vinyl Chloride

Water Vapor

Xylenes

* Box contains 5 colorimetric tube s and 5 pre -tubes, for a total of 5 measurements.

Other boxes contain 10 colorimetric tubes.

Part Number

H-10-10 3-04 0.2 to 3 ppmv 0.1 to 6 ppmv

H-10-10 3-05* 0.2 to 3 ppmv

H-10-10 3-06 1 to 7 ppmv 0.25 to 3.5 ppmv

H-10-10 3-10 2.5 to 60 ppmv 1.25 to 120 ppmv

H-10-10 3-12 0 to 150 ppmv 0 to 300 ppmv

H-10-10 3-15 10 to 120 ppmv 5 to 240 ppmv

H-10-10 3-18 25 to 250 ppmv 12.5 to 500 ppmv

H-10-10 3-2 0 50 to 800 ppmv 25 to 1600 ppmv

H-10-10 3-3 0 100 to 2000 ppmv 50 to 4000 ppmv

H-10-10 3-40 0.1 to 2% 0.05 to 4%

H-10-10 3-50 2 to 40% 0.5 to 20%

H-10-113-2 0 0.02 to 0.6 % 0.01 to 1.8 %

H-10-129-2 0 5 to 120 ppmv 2.5 to 240 ppmv

H-10-131-10 * 1 to 18 ppmv 0.5 to 36 ppmv

H-10-131-3 0 * 20 to 300 ppmv 10 to 600 ppmv

H-10-14 6-2 0 1 to 20 ppm 0.5 to 40 ppm

H-10-117-10 0.5 to 30 ppmv N/A

H-10-10 9 -2 0 * 1 to 50 ppmv 0.5 to 100 ppmv

H-10-133-03 0.05 to 0.6 ppmv 0.15 to 1.8 ppmv

H-10-139-05 1 to 25 ppmv 0.5 to 180 ppmv

H-10-116 -10 5 to 50 ppmv 2.5 to 100 ppmv

H-10-116 -2 0 25 to 500 ppmv 12.5 to 1000 ppmv

H-10-116 -2 5 50 to 1000 ppmv 25 to 2000 ppmv

H-10-107-15 2 to 30 ppmv 1 to 60 ppmv

H-10-107-2 0 5 to 100 ppmv 2.5 to 200 ppmv

H-10-107-2 5 100 to 1800 ppmv 50 to 3600 ppmv

H-10-107-3 0 200 to 4000 ppmv 50 to 2000 ppmv

H-10-107-40 0.2 to 5 % 0.1 to 10 %

H-10-114-2 0 10 to 300 ppmv 5 to 600 ppmv

H-10-119 -2 0 * 5 to 100 ppmv 2.5 to 230 ppmv

H-10-128-10* 1 to 20 ppmv 0.5 to 40 ppmv

H-10-120-10 2 to 10 lbs/MMCF

H-10-120-2 0 6 to 40 lbs /MMCF

H-10-120-3 0 0.05 to 1 mg/ L 0.025 to 2 mg/ L

H-10-120-40 1 to 18 mg/L 0.5 to 32 mg/ L

H-10-112- 20 10 to 200 ppmv 5 to 400 ppmv

Standard Range Extended Range

w/ desiccant

(0.03 to 0.16 mg/L)

(0.1 to 0.64 mg/L)

0.1 to 6 ppmv

1 to 20 lbs/MMCF

3 to 80 lbs/MMCF

[e-mail]
www.honeywellanalytics.com

Please Note: While every effort has been made to ensure accuracy in this publication, no responsibility can be accepted for errors or omissions. Data may change, as well as legislation, and you are strongly advised to obtain copies of the most recently
issued regulations, standards, and guidelines. This publication is not intended to form the basis of a contract.

© 2014 Honeywell International

DTN6679-01-EN