Honeywell KI 209, KI 208 Installation Manual

RELEASED FOR THE EXCLUSIVE USE BY: AIRCRAFT ELECTRONICS ASSOCIATION

INSTALLATION MANUAL

KI 208, KI 209

NAVIGATION INDICATORS

MANUAL NUMBER 006-00140-0004

Revision 4, August 2002

UP536434

RELEASED FOR THE EXCLUSIVE USE BY: AIRCRAFT ELECTRONICS ASSOCIATION

WARNING

PRIOR TO EXPORT OF THIS DOCUMENT, REVIEW FOR EXPORT LICENSE REQUIREMENT IS NEEDED.

UP536434

REPRODUCTION OF THIS PUBLICATION OR ANY PORTION THEREOF BY ANY MEANS WITHOUT THE EXPRESS WRITTEN PERMISSION OF HONEYWELL IS PROHIBITED. FOR FURTHER INFORMATION CONTACT THE MANAGER, TECHNICAL PUBLICATIONS, HONEYWELL, ONE TECHNOLOGY CENTER, 23500 WEST 105TH STREET OLATHE KS 66061 TELEPHONE: (913) 782-0400.

RELEASED FOR THE EXCLUSIVE USE BY: AIRCRAFT ELECTRONICS ASSOCIATION

BENDIX/KING KI 208, KI 209

REVISION HISTORY

INSTALLATION MANUAL

BENDIX/KING

KI 208, KI 209

Navigation Indicators

PART NUMBER REV DATE DESCRIPTION

--------------------------------------------------------------------------------------------------------------------006-00140-0004 4 Aug/2002 Replaces P/N 006-00140-0003.

006-00140-0003 3 Oct/1996 Replaces P/N 006-00140-0002.

006-00140-0002 2 Mar/1988 Replaces P/N 006-00140-0001.

UP536434

Rev 4, Aug 2002 IM 006-00140-0004 RH-1

RELEASED FOR THE EXCLUSIVE USE BY: AIRCRAFT ELECTRONICS ASSOCIATION

BENDIX/KING KI 208, KI 209

THIS PAGE RESERVED

UP536434

Rev 4, Aug 2002 IM 006-00140-0004 RH-2

RELEASED FOR THE EXCLUSIVE USE BY: AIRCRAFT ELECTRONICS ASSOCIATION

BENDIX/KING TABLE OF CONTENTS KI 208, KI 209

SECTION I

GENERAL INFORMATION

Paragraph Page

1.1 Introduction .............................................................................................1-1

1.2 Equipment Description.............................................................................1-1

1.3 Technical Characteristics.........................................................................1-1

1.4 Units and Accessories Supplied ..............................................................1-2

1.5 Accessories Required, But Not Supplied.................................................1-3

1.6 License Requirements.............................................................................1-3

1.7 Requirements for TSO’d VOR/ ILS/ Glideslope System..........................1-3

LIST OF TABLES

Table Page

1-1 Technical Characteristics KI 208, KI 209.................................................1-1

SECTION II

INSTALLATION

Paragraph Page

2.1 General....................................................................................................2-1

2.2 Unpacking and Inspecting Equipment .....................................................2-1

2.3 Installation KI 208, KI 209 .......................................................................2-1

2.4 Post Installation Checkout .......................................................................2-2

LIST OF TABLES

Table Page

2-1 ILS Deflection ..........................................................................................2-3

2-2 Glideslope Deflection...............................................................................2-3

LIST OF ILLUSTRATIONS

Figure Page

2-1 KI 208 Pinout List.....................................................................................2-5

2-2 KI 209 Pinout List.....................................................................................2-6

2-3 Crimping Tool ..........................................................................................2-7

2-4 KI 208, KI 209 Connector Assembly .......................................................2-8

2-5 KI 208, KI 209 Outline and Mounting .....(Dwg 155-05235-0000)...........2-9

2-6 KI 208, KI 209 Typical Interconnect ....... ..............................................2-11

2-7 KI 208 Non-TSO’d System Interconnect.(Dwg 155-01223-0000).........2-13

2-8 KI 209 System Interconnect....................(Dwg 155-01241-0000).........2-15

UP536434

Rev 4, Aug 2002 IM 006-00140-0004 TOC-1

RELEASED FOR THE EXCLUSIVE USE BY: AIRCRAFT ELECTRONICS ASSOCIATION

BENDIX/KING TABLE OF CONTENTS KI 208, KI 209

SECTION III

OPERATION

Paragraph Page

3.1 Equipment Operation ..............................................................................3-1

3.2 Indicator Control Functions KI 208, KI 209..............................................3-2

LIST OF ILLUSTRATIONS

Figure Page

3-1 KI 208 Control Functions .........................................................................3-3

3-2 KI 209 Control Functions .........................................................................3-4

UP536434

Rev 4, Aug 2002 IM 006-00140-0004 TOC-2

RELEASED FOR THE EXCLUSIVE USE BY: AIRCRAFT ELECTRONICS ASSOCIATION

BENDIX/KING KI 208, KI 209

SECTION I

GENERAL INFORMATION

1.1 INTRODUCTION

This manual contains information relative to the physical, mechanical and electrical characteristics of the Bendix/King Silver Crown KI 208 and KI 209.

1.2 EQUIPMENT DESCRIPTION

The Bendix/King KI 208 VOR Indicator is designed to operate with VHF navigational equipment (such as the KX 155, KX 155A, KX 165A) to provide OMNI (VOR) or LOCALIZER (LOC) information. The VHF navigational receiver receives and detects the omni or localizer information. The KI 208 converts this information to DC signals which drive the LEFT-RIGHT needle and the TO-OFF-FROM flag of the visual indicator.

The KI 209 ILS Indicator performs the same functions as the KI 208. In addition, it contains an UP-DOWN glideslope needle with an OFF warning flag.

An anti reflective lens coating is also available on some models of the KI 208 and KI 209.

1.3 TECHNICAL CHARACTERISTICS

TABLE 1-1 Technical Characteristics KI 208, KI 209

SPECIFICATION CHARACTERISTIC

KI208, KI209 TSO COMPLIANCE: C40a, C36c Class C Cat 2.

DO-138 Environmental Cat. DAPAAAXXXXXX.

ADDITIONAL TSO COMPLIANCE FOR KI 209 ONLY:

SIZE: See Figure 2-5 (P/N 155-05235-0000).

WEIGHT: See Figure 2-5 (P/N 155-05235-0000).

POWER REQUIREMENTS:

KI 208, KI 209 Indicator

C34c Class D Cat 2.

14 Vdc at 50 mA, 28 Vdc at 50 mA.

UP536434

KI 208 Lighting

KI 209 Lighting

KI 208, KI 209 Lighting

Rev 4, Aug 2002 IM 006-00140-0004 Page 1-1

14 Vdc at 80 ±20 mA. 14 Vdc at 160 ±45 mA. 28 Vdc at 80 ±20 mA.

RELEASED FOR THE EXCLUSIVE USE BY: AIRCRAFT ELECTRONICS ASSOCIATION

BENDIX/KING KI 208, KI 209

TABLE 1-1 Technical Characteristics KI 208, KI 209

SPECIFICATION CHARACTERISTIC

VOR/LOC:

Input Impedance:

Nominal Composite Input Level:

Localizer Sensitivity:

OMNI Accuracy:

OMNI Sensitivity:

External Load:

GLIDESLOPE DEVIATION METER:

Input Impedance:

Deflection Sensitivity:

GLIDESLOPE FLAG:

Input Impedance:

50 k ohms, nominal.

LOC: 0.33 ±10% Vrms. VOR: 0.50 ±10% Vrms ARINC phased.

4 dB tone ratio will give 3 dot scale deflection.

±2° max error, ±1° typical.

±10° off course gives full scale deflection.

ARINC autopilot deviation (two 1 k loads).

1 k ±5% ohms.

150 ±5% uA for full scale deflection.

1 k ±5% ohms minimum.

Deflection Sensitivity:

125 uA for flag to leave stop. 260 uA maximum for fully concealed flag.

1.4 UNITS AND ACCESSORIES SUPPLIED

1.4.1 KI 208 VOR Indicator

066-3056-00 066-3056-02 Antireflective lens

1.4.2 KI 209 ILS Indicator

066-3056-01 066-3056-03 Antireflective lens

1.4.3 Bendix/King Equipment Installation Kit (P/N 050-01550-0000) which includes mating connectors, mounting hardware, etc., is as follows:

UP536434

Rev 4, Aug 2002 IM 006-00140-0004 Page 1-2

+ 18 hidden pages

Honeywell KI 209, KI 208 Installation Manual

Specifications and Main Features

Frequently Asked Questions

User Manual

BENDIX/KING TABLE OF CONTENTS KI 208, KI 209

SECTION I

1.1 INTRODUCTION

1.2 EQUIPMENT DESCRIPTION

1.3 TECHNICAL CHARACTERISTICS

1.4 UNITS AND ACCESSORIES SUPPLIED