Honeywell JADE Economizer Module with Sensors and Actuators Catalog Page
Economizer Logic Modules
JADE™ Economizer Module with Sensors and Actuators
Dimensions, Approximate: 4.98 in. high x 6.3 in. wide x 1.34 in. deep (126.4 mm high x 160 mm wide x 34mm deep)
Contact Ratings: 1.5 A Run @ 30 Vac; 3.5 A Inrush @ 30 Vac
Voltage: 24 Vac Frequency: 50 Hz; 60 Hz
Operating Temperature Range: -40 F to -150 F (-40 C to +65 C) Operating Humidity Range (% RH): 5 to 95% RH, non-condensing Color: Gray
The JADE™ Economizer System is an expandable economizer control system, which includes a W7220 Economizer Module (controller) with an LCD and keypad. The W7220 can be configured for 4 different economizer strategies: referential or differential dry bulb, referential or differential enthalpy.
The W7220 Economizer Module can be used as a standalone economizer module wired directly to a commercial set back space thermostat and sensors to provide Outdoor Air dry-bulb economizer control.
The W7220 Economizer Module can be connected to optional Sylk Bus sensors for single or differential enthalpy control. The W7220 Economizer Module provides power and communications on the Sylk Bus for the sensors.
The W7220 Economizer Module automatically detects sensors by polling to determine which sensors are present. If a sensor loses communications after it has been detected, the W7220 Economizer indicates a device fail error on the display or through the AUX 1 OUT terminal programmed to SYS.
Used With: C7232; Honeywell Series 72 actuators; C7250A and C7400S sensors
Approvals
CE: CE Compliance
C-Tick: Approved
Federal Communications Commission: Compliant Underwriters Laboratories, Inc: Flammability Rating UL94V-5V
Other Agencies: Complies with California Title 24
|
|
|
|
Product Number |
Input |
Output |
Use with Sensor |
|
|
|
|
W7220A1000/U |
Y1, Y2 and occupied input in from thermostat or unitary controller, |
Y1 and Y2 out to the mechanical |
C7250A1001/U and |
|
24 VAC power, Mixed air sensor, OA sensor and optional CO2 and |
cooling, AUX 1 out |
C7400S1000/U sensors. |
|
(programmable), 2-10 or SYLK |
|
|
|
RA sensors. And Programmable AUX 2 In. |
communicating to the actuator. |
|
|
|
|
|
Jade Y-packs |
|
|
|
|
|
|
|
Product Number |
Control Type |
Includes |
Comments |
|
|
|
|
Y7220A7215/U |
Dry Bulb with black motor |
W7220A1000 Logic Module; C7250A1001 OAT sensor; |
Output - 2-10 Vdc to actuator |
|
|
C7250A1001 MAT sensor; M7215A1008 Black motor |
|
|
|
|
|
YL7220A7503/U |
Dry Bulb with non-communicating DCA |
W7220A1000 Logic Module; C7250A1001 OAT sensor; |
Output - 2-10 Vdc to actuator |
|
|
C7250A1001 MAT sensor; MS7503A2030 DCA OA |
|
|
|
|
|
YL7220AJ3103/U |
Dry Bulb with communicating 27 lb-in DCA |
W7220A1000 Logic Module; C7250A1001 OAT sensor; |
Sylk communicating actuator |
|
|
C7250A1001 MAT sensor; MS3103J1030 DCA OA |
|
|
|
|
|
YL7220AJ3105/U |
Dry Bulb with communicating 44 lb-in DCA |
W7220A1000 Logic Module; C7250A1001 OAT sensor; |
Sylk communicating actuator |
|
|
C7250A1001 MAT sensor; MS3105J3030 DCA OA |
|
|
|
|
|
YL7220ACW3103/U |
Dry Bulb with communicating 27 lb-in DCA |
W7220A1000 Logic Module; C7250A1001 OAT sensor; |
Sylk communicating actuator |
|
and CO2 wall sensor without a display |
C7250A1001 MAT sensor; MS3103J1030 DCA OA; |
|
|
|
C7632A1004 CO2 sensor |
|
|
|
|
|
Y7220S7215/U |
Enthalpy with black motor |
W7220A1000 Logic Module; C7400S1000 OAE sensor; |
Output - 2-10 Vdc to actuator |
|
|
C7250A1001 MAT sensor; M7215A1008 Black motor |
|
|
|
|
|
Y7220SCW7215/U |
Enthalpy with black motor and CO2 wall |
W7220A1000 Logic Module; C7400S1000 OAE sensor; |
Output - 2-10 Vdc to actuator |
|
sensor with a display |
C7250A1001 MAT sensor; M7215A1008 Black motor; |
|
|
|
C7232A1016 CO2 sensor |
|
|
|
|
|
Y7220SCD7215/U |
Enthalpy with black motor and CO2 duct |
W7220A1000 Logic Module; C7400S1000 OAE sensor; |
Output - 2-10 Vdc to actuator |
|
sensor with a display |
C7250A1001 MAT sensor; M7215A1008 Black motor; |
|
|
|
C7232A1016 CO2 sensor |
|
|
|
|
|
YL7220S7503/U |
Enthalpy with non-communicating DCA |
W7220A1000 Logic Module; C7400S1000 OAE sensor; |
Output - 2-10 Vdc to actuator |
|
|
C7250A1001 MAT sensor; MS7503A2030 DCA OA |
|
|
|
|
|
YL7220SJ3103/U |
Enthalpy with communicating 27 lb-in DCA |
W7220A1000 Logic Module; C7400S1000 OAE sensor; |
Sylk communicating actuator |
|
|
C7250A1001 MAT sensor; MS3103J1030 DCA OA |
|
|
|
|
|
YL7220SJ3105/U |
Enthalpy with communicating 44 lb-in DCA |
W7220A1000 Logic Module; C7400S1000 OAE sensor; |
Sylk communicating actuator |
|
|
C7250A1001 MAT sensor; MS3105J3030 DCA OA |
|
|
|
|
|
YL7220SCW3103/U |
Enthalpy with communicating 27 lb-in DCA |
W7220A1000 Logic Module; C7400S1000 OAE sensor; |
Sylk communicating actuator |
|
and CO2 wall sensor with a display |
C7250A1001 MAT sensor; MS3103J1030 DAC OA ; |
|
|
|
C7232A1016 CO2 sensor |
|
|
|
|
|
YL7220SCD3103/U |
Enthalpy with communicating 27 lb-in DCA |
W7220A1000 Logic Module; C7400S1000 OAE sensor; |
Sylk communicating actuator |
|
and CO2 duct sensor with a display |
C7250A1001 MAT sensor; MS3103J1030 DAC OA ; |
|
|
|
C7232B1014 CO2 sensor |
|
|
|
|
|
404 |
customer.honeywell.com |
70-6910 |
Loading...