Honeywell HZC-855NX, HZC-855PX User Manual

OPERATION MANUAL

Built-in x35 ZOOM / WDR

High Resolution AUTO FOCUS CAMERA

HZC-855NX/PX Series

READ AND KEEP THIS OPERATION MANUAL

CAUTION:

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER
(OR BACK). NO USER SERVICEABLE
PARTS INSIDE.
PREFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.

Indicate a potentially hazardous situation which if not avoided,
may result in minor or moderate injury. It may also be used to
alert against unsafe practices.

Warning:
This equipment generates and uses radio frequency energy
and if not installed and used properly, I.e., in strict accordance
with the instruction manual, may cause harmful interference
to radio communications. It has been tested and found to comply
with the limits for a Class A computing device pursuant to Subpart
J of Part 15 of FCC Rules, which are designed to provide reasonable
protection against such interference when operated in a commercial
environment.

Warning:
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE.

-2-

CAUTION FOR SAFE OPERATION

1. Water and Moisture

To prevent fire or shock hazard, do not expose this camera

to rain or moisture.

2. Servicing

Do not attempt to disassemble or repair by yourself.
You may be exposed to dangerous voltage or other hazards.
Note that all servicing is qualified service personnel.
Modifications not approved by manufacturer could
void the user's authority to operate the equipment.

3. Power Sources

To prevent electric shocks and risk of hazards, do not use
more than the specified power source.

4. Environment

Do not install too warm or too cold place. Recommended
operation temperature is between -5℃ and 60℃

5. Sunlight

Do not point the camera at the sun. CCD can be damaged.

6. Heavy Shock and Vibration

Do not drop the camera or subject it to heavy shock of
vibration.

7. Install on an Unstable Place

Do not place or install this camera on an unstable place,
stand, tripod, bracket or table. That may cause serious injury
to people or damage to appliance.

8. When operation is incorrect or a malfunction is observed

While operating, if any abnormal condition (strange sound,
smell or smoke) or a malfunction (no pictures, etc.) is
observed, stop using the camera immediately, turn the
power off, then contact your supplier.

9. Cleaning

Turn the power off and wipe off the dirt with a dry softcloth.
If it is extremely dirty, use furniture cleaner to wipe it off.
To clean the lens, use a blower or lens cleaning tissue.
(available from any camera dealer)

10. Do not shoot any source of bright light.

If the objects contain very bright areas, bright vertical or
horizontal lines may appear on the screen. This is called
"smear" , a Phenomenon which often occurs with solid

-state pickups, and is not a malfunction.

11. Damage Requiring service

Unplug the camera from the power source and refer
servicing to qualified service personnel under the following
condition:

a. If the power-supply cord or plug is damaged.
b. If the camera has been exposed to rain or water.
c. If liquid has been spilled, or objects have fallen into the camera.
d. If the camera does not operate normally by following the operating

instructions. Adjust only those controls that are covered by the
operating instructions as an improper adjustment of other controls
may result in damage and will often require extensive work by a

qualified technician to restore the camera to its normal operation.
e. If the camera has been dropped or the cabinet has been damaged.
f . If the camera exhibits a distinct change in performance.

Warranty is not covered in case of natural disaster or wrong
Installation.

-3-

CONTENTS

1. Features ---------------------------------------------------------------5

2. Terms & Functions ------------------------------------------------6

3. Installation ------------------------------------------------------------7

4. Camera Control Methods -------------------------------------------8

5. On Screen Display --------------------------------------------------10

6. Specifications ---------------------------------------------------------21

7. Dimensions ------------------------------------------------------------22

Thank you for using our Auto Focus Zoom Color Camera. To get thebest
efficiency, read carefully all instructions in this manual before use, and
keep this manual for reference. If you have any problems with this camera,
contact your supplier to service.

-4-

1. Features

Ideal Digital Video Camera for Security

The HZC-855NX/PX Ser. is a compact camera that offers easy system
integration. Coming with the built-in zoom lens, the user can monitor the
scene from variable angle without the extra lens.
With the DSP technology, such intelligent controls as auto iris,
and auto white balance are possible to realize clear detailed picture.
Additionally, through RS-232C, RS422, remote Focus/Zoom operations
are also possible, along with manual control. All these featuresincluding
highly sensitive 1/4-inch CCD make the ideal digital processing CCTV
camera HZC-855NX/PX series more effective surveillance.

Built -in x35 Optical power zoom lens

The HZC-855NX/PX Ser. with highly durable built-in zoom lens offers
auto focus, auto iris , and optical zoom functions enabling the user
to monitor a scene with clarity in any desired angle of view.
With the x35 optical zoom lens, the total zoom can be up to x90 with
x2.5 digital zoom processing.

High Resolution & Sensitivity SONY CCD

The chassis features a highly sensitive 1/4-inch CCD pickup with
approximately 380,000 effective pixels minimizing residual image
and geometric distortion. All images are reproduced with a high
horizontal resolution of 530 TV lines for fine detail.

High Sensitivity with Integration and removal of IR filter

HZC-855NX/PX Ser. has the increased light sensitivity to 0.0005lx
(510 fields, IR Cut Filter ON) through field (frame) integration
technology. With Integration and removal of IR cut filter make more
effective surveillance though low light condition.(HZC-855NX/PX : less
than 0.00001 lx)

Privacy Zone Masking

HZC-855NX/PX Ser. mask the unwanted view for privacy protection
up to 8 zones. Privacy Zone operate with zoom in/out and it increases
the effect of privacy protection.

Remote Control through RS232C, RS422 Interface

Remote control operations are possible through RS232C/RS422
interface for Focus, Zoom control and various functions.

AI / Fuzzy Control Circuit with DSP

Advanced DSP technology automatically adjusts operations such as

Iris , White Balance flexibly adapting to environmental conditions.

Auto Iris : the iris is adjusted so that visual output is kept at a fixed

level, even if brightness of the surrounding changes.

Auto White Balance : color adjustment according to the color

temperature of the light source illuminating the subject.
white balance can be obtained even with fluorescent
lights, halogen lamps or outdoor.

WDR (Wide Dynamic Range)

This is the technology using dual shutters from both dark and bright
areas to be enhanced and displayed vivid video image. While a
conventional image shows white clip caused by the bright spot, WDR
overcomes and solves the obstacle of the white clip problem.

-5-

2. Terms & Functions

FAR(-) BUTTON

TELE(UP) BUTTON

NEAR(+) BUTTON

VIDEO OUTPUT

This is the output terminal
for composite video signal .

VIDEO

MENU BUTTON
WIDE(DOWN) BUTTON

POWER INPUT TERMINAL

DC 12V
( Please use a specified adaptor)

CAMERA CONTROL CONNECTOR

This is the 14 pin connector for external
camera controls .
( Refer to 4. CAMERA CONTROL METHODS )

-6-

SVIDEO

This is the output terminal
for separate Y/C signal .

POWER ON LAMP

In power ON state ,
this LED is ON .

S-VIDEO OUTPUT

3. Installation

3.1 Check all accessories with enclosed package .

-HZC-855NX/PX Ser. SET

-14 PIN CONNECTION CABLE (150mm)

-OPERATION MANUAL

HZC-855NX/PX Ser. 14 PIN CABLE*

* CABLE DESCRIPTION

1. KEY1

3. ZOOM

5. MENU

7. GND

9. R+/NC

11. T+/TD

13. EXT_VD

( RED )
( GREEN )
( WHITE )
( BLACK )
( BROWN )
( VIOLET )
( WHITE )

2. KEY2

4. FOCUS

6. COM

8. GND

10. R-/RD

12. T-/GND

14. GND

-7-

OPERATION MANUAL

( YELLOW )
( BLUE )
( ORANGE )
( BLACK )
( PINK )
( GRAY )
( BLACK)