Honeywell HY-108, HY-105 User Manual

Owner’s Manual

IMPORTANT SAFETY
INSTRUCTIONS

READ AND SAVE THESE SAFETY
INSTRUCTIONS BEFORE USING
THIS FAN

When using electrical appliances,
basic precautions should always
be followed to reduce the risk of
fire, electric shock, and injury to
persons, including the following:

FOR US MODELS ONLY – This product
employs overload protection (fuse). A blown
fuse indicates an overload or short-circuit
situation. If the fuse blows, unplug the product
from the outlet. Replace the fuse as per the
user servicing instructions (follow product
marking for proper fuse rating) and check
the product. If the replacement fuse blows,
a short-circuit may be present and the
product should be discarded or returned to an
authorized service facility for examination and/
or repair.

1. Use this fan only as described in this
manual. Other use not recommended as
it may cause fire, electric shock or injury
to persons.

2. This product is intended for household
use ONLY and not for commercial,
industrial or outdoor use.

3. To protect against electric shock, do not

The Honeywell trademark is used by Kaz, Inc. under license from Honeywell International Inc.

Honeywell International Inc. makes no representation or warranties with respect to this product.

QUIETSET™
WHOLE ROOM TOWER FAN

HY-105 Series
HY-108 Series

place fan in window, immerse unit, plug
or cord in water or spray with liquids.

4. This appliance has a polarized plug
(one blade is wider than the other). To
reduce the risk of shock, this plug is
intended to fit only one way in a polarized
outlet. If the plug does not fit fully in the
outlet, reverse the plug. If it still does
not fit, contact a qualified electrician.
DO NOT attempt to defeat this safety
feature.

5. Close supervision is necessary when any
appliance is used by or near children.

6. Turn the fan OFF and unplug the fan from
the outlet when not in use, when moving
the fan from one location to another and
before cleaning.

7. To disconnect the fan, first turn the unit
OFF, grip the plug and pull it from the wall

outlet. Never pull the plug by the cord.

8. Do not operate the fan in the presence of
explosive and/or flammable fumes.

9. Do not place the fan or any parts near
an open flame, cooking or other heating
appliance.

10. Do not operate the fan with a
damaged cord or plug or if the product
malfunctions, is dropped
or damaged in any manner
(see warranty).

11. Avoid contact with moving fan parts.

12. The use of attachments not

recommended by the manufacturer may
be hazardous.

13. Place the fan on a dry level surface.

14. Do not hang or mount fan on a wall

or ceiling.

15. Do not operate if the fan housing is
damaged.

16. A loose fit between the AC outlet
(receptacle) and plug may cause
overheating and a distortion of the plug.
Contact a qualified electrician to replace
loose or worn outlet.

17. Do not operate any fan with a damaged
cord or plug. Discard any damaged fan,
return the fan to the retailer where the
fan was purchased, or request a return
authorization to return to Kaz, Inc. for
examination and/or repair.

FUSED SAFETY PLUG - FOR US ONLY

Thank you for your purchase.

This fan features a fused safety plug which is designed to cut off electric current to the fan if an
electrical fault occurs. Please see below for more information on how to properly use your fan and
replace the safety plug fuse, if needed.

18. Do not run fan cord under carpeting. Do
not cover cord with throw rugs, runners,
or similar coverings. Do not route cord
under furniture or appliances. Arrange
cord away from traffic areas and where it
will not be tripped over.

WARNING: To Reduce The Risk of Fire or
Electric Shock, Do Not Use This Fan With
Any Solid-State Speed Control Device,
other than the one supplied.

USER SERVICING INSTRUCTIONS

• Grasp plug and remove from the receptacle or other outlet device.
Do not unplug by pulling on cord.

• If your fan loses power and you suspect that the fuse on your fan
has blown, you should first remove the spare fuse holder attached
to the cord plug (Fig. 1). Remove the spare fuse from the plastic
spare fuse holder, and set the spare fuse aside (Fig. 2).

• You can gain access to the blown fuse by sliding open the door
found on the side of the plug. Slide the door outward until the
blown fuse is fully visible (Fig. 3).

• Carefully remove the blown fuse and snap the replacement fuse

into place. Risk of fire. Replace fuse only with 2.5 Amp, 125 volt
fuse (provided with product). Fully close the fuse door by sliding
back into place. Discard the blown fuse. The plug should now be
ready for normal use.

• Risk of fire. Do not replace attachment plug. Contains a safety

device (fuse) that should not be removed. Discard product if the
attachment plug is damaged.

• If you need further information on how or when to replace the
fuse in the safety plug, please contact Kaz Consumer Relations
Department by visiting our website at www.kaz.com or calling
1-800-477-0457.

Fig. 1

Fig. 2

Fig. 3