Honeywell HRDP DVR User Manual
Xt
HRDP DVR
Performance Series
Digital Recording and Transmission System
User Guide
______________________________________________________________________________________________
Document 800-02089 Rev E 10/08
Warnings and Safeguards
______________________________________________________________________________________________
2
Performance Series DVR User Guide
Revisions
Issue Date Revisions
A 05/08 Initial Release
B 06/08 Updated remote control image
C 06/08 Updated content
D 08/08 Added list of approved USB flash drives
E 10/08 Added Appendix content
______________________________________________________________________________________________
Document 800-02089 Rev E 3
10/08
Warnings and Safeguards
______________________________________________________________________________________________
4
Performance Series DVR User Guide
Warnings and Safeguards
FCC STATEMENT
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.
EN 55022 Class A Notice
WARNING
This is a class A product. In a domestic environment this product may cause radio interference in which
case the user may be required to take adequate measures.
______________________________________________________________________________________________
Document 800-02089 Rev E 5
10/08
Warnings and Safeguards
Important Safeguards
1.
Read Owner’s Manual – After unpacking this product, read the owner’s manual carefully, and
follow all the operating and other instructions.
2.
Power Sources – This product should be operated only from the type of power source indicated
on the label. If not sure of the type of power supply to your home or business, consult product
dealer or local power company
3.
Ventilation – Slots and openings in the cabinet are provided for ventilation and to ensure reliable
operation of the product and to protect it from overheating, and these openings must not be
blocked or covered. The product should not be placed in a built-in installation such as a
bookcase or rack unless proper ventilation is provided or Honeywell’s instructions have been
adhered to.
4.
Heat – The product should be situated away from heat sources such as radiators, heat registers,
stoves, or other products that produce heat.
5.
Water and Moisture – Do not use this product near water. Do not exceed the humidity
specifications for the product as detailed in this manual
6.
Cleaning – Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or
aerosol cleaners. Use a damp cloth for cleaning.
7.
Power Cord Protection – Power-supply cords should not be routed so that they are likely to be
walked on or pinched by items placed against them, paying particular attention to cords at plugs,
receptacles, and the point where they exit the product.
8.
Overloading – Do not overload wall outlets; extension cords, or integral convenience receptacles
as this can result in a risk of fire or electrical shock.
9.
Lightning – For added protection for this product during storm, or when it is left unattended and
unused for long periods of time, unplug it from the wall outlet. This will prevent damage to the
product due to lightning and power line surges.
10.
Object and Liquid Entry Points – Never insert foreign objects into the DVR, other than the media
types approved by Honeywell, as they may touch dangerous voltage points or short-out parts that
could result in a fire or electrical shock. Never spill liquid of any kind on the product.
11.
Accessories – Do not place this product on an unstable cart, stand, tripod, bracket, or table. The
product may fall, causing serious personal injury and serious damage to the product.
12.
Disc Tray – Keep fingers well clear of the disc tray as it is closing. Neglecting to do so may cause
serious personal injury.
13.
Burden – Do not place a heavy object on or step on the product. The object may fall, causing
serious personal injury and serious damage to the product.
14.
Disc – Do not use a cracked, deformed, or repaired disc. These discs are easily broken and may
cause serious personal injury and product malfunction.
15.
Fuses - CAUTION: For continued protection against risk of fire, replace only with same type and
rating of fuse.
______________________________________________________________________________________________
6
Performance Series DVR User Guide
16.
Replaceable Batteries - CAUTION: Risk of Risk of Explosion if Battery is replaced by an Incorrect
Type. Dispose of Used Batteries According to the Instructions
17.
Grounded Outlet - This equipment shall be connected to a properly grounded outlet."
18.
Outlet Location – This equipment must be installed within six feet of an easily accessible outlet.
19.
Damage Requiring Service – Unplug the unit from the outlet and refer servicing to qualified
service personnel under the following conditions:
When the power-supply cord or plug is damaged.
If liquid has been spilled, or objects have fallen into the unit.
If the unit has been exposed to rain or water.
If the unit does not operate normally by following the operating instructions. Adjust only those
controls that are covered by the operating instructions as an improper adjustment of other
controls may result in damage and will often require extensive work by a qualified technician to
restore the unit to its normal operation.
If the unit has been dropped or the enclosure has been damaged.
When the unit exhibits a distinct change in performance - this indicates a need for service.
20.
Servicing – Do not attempt to service this product. Opening or removing covers may expose the
user to dangerous voltage or other hazards. Refer all servicing to qualified personnel.
21.
Replacement Parts – When replacement parts are required, be sure the service technician has
used replacement parts specified by Honeywell. Unauthorized substitutions may result in fire,
electric shock or other hazards.
22.
Safety Check – Upon completion of any service or repairs to this unit, ask the service technician
to perform safety checks to determine that the unit is in proper operating condition.
______________________________________________________________________________________________
Document 800-02089 Rev E 7
10/08
Warnings and Safeguards
Notes on Handling
Please retain the original shipping carton and/or packing materials supplied with this product. To ensure
the integrity of this product when shipping or moving, repackage the unit as it was originally received
from Honeywell.
Do not use volatile liquids, such as aerosol spray, near this product. Do not leave rubber or plastic
objects in contact with this product for long periods of time. They will leave marks on the finish.
The top and rear panels of the unit may become warm after long periods of use. This is not a
malfunction.
Notes on Locating
Place the unit on a level surface. Do not use it on a shaky or unstable surface such as a wobbling table
or inclined stand.
If this unit is placed next to a TV, radio, or VCR, the playback picture may become poor and the sound
may be distorted. If this happens, place the DVR away from the TV, radio, or VCR.
Notes on Cleaning
Use a soft dry cloth for cleaning.
For stubborn dirt, soak the cloth in a weak detergent solution, wring well and wipe. Use a dry cloth to
wipe it dry. Do not use any type of solvent, such as thinner and benzene, as they may damage the
surface of the DVR.
If using a chemical saturated cloth to clean the unit, follow that product’s instructions.
Notes on Maintenance
This DVR is designed to last for long periods of time. To keep the DVR always operational we
recommend regular inspection maintenance (cleaning parts or replacement). For details contact the
nearest dealer.
______________________________________________________________________________________________
8
Performance Series DVR User Guide
Notes on Moisture Condensation
Moisture condensation could damage the DVR. Read the following information carefully.
Moisture condensation might occur under the following circumstances:
When this product is brought directly from a cool location to a warm location.
When this product is moved to a hot and humid location from a cool location.
When this product is moved to a cool and humid location from a warm location.
When this product is used in a room where the temperature fluctuates.
When this product is used near an air-conditioning unit vent
When this product is used in a humid place.
Do not use the DVR when moisture condensation may occur.
If the DVR is used in such a situation, it may damage discs and internal parts. Remove any CD discs,
connect the power cord of the DVR to the wall outlet, turn on the DVR, and leave it for two to three hours.
After two to three hours, the DVR will warm up and evaporate any moisture. Keep the DVR connected to
the wall outlet and moisture will seldom occur.
Safety Instructions – Rack Mount
A) Elevated Operating Ambient – If installed in a closed or multi-unit rack assembly, the operating
ambient temperature of the rack environment may be greater than room ambient. Therefore,
consideration should be given to installing the equipment in an environment compatible with the
maximum ambient temperature (Tma) specified by the manufacturer.
B) Reduced Air Flow – Installation of the equipment in a rack should be such that the amount of air flow
required for safe operation of the equipment is not compromised.
C) Mechanical Loading – Mounting of the equipment in the rack should be such that a hazardous
condition is not achieved due to uneven mechanical loading.
D) Circuit Overloading - Consideration should be given to the connection of the equipment to the supply
circuit and the effect that overloading of the circuits might have on overcurrent protection and supply
wiring. Appropriate consideration of equipment nameplate ratings should be used when addressing this
concern.
E) Reliable Earthing - Reliable earthing of rack-mounted equipment should be maintained. Particular
attention should be given to supply connections other than direct connections to the branch circuit (e.g.
use of power strips)."
______________________________________________________________________________________________
Document 800-02089 Rev E 9
10/08
Warnings and Safeguards
WARNING
TO REDUCE THE RISK OF ELECTRICAL SHOCK, DO NOT EXPOSE THIS
DANGEROUS HIGH VOLTAGES ARE PRESENT INSIDE THE ENCLOSURE.
CAUTION
APPLIANCE TO RAIN OR MOISTURE.
DO NOT OPEN THE CABINET.
REFER SERVICING TO QUALIFIED PERSONNEL ONLY.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (O R BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
______________________________________________________________________________________________
10
Performance Series DVR User Guide
Contents
1 Warnings and Safeguards .............................................................................................................. 5
2 Contents ........................................................................................................................................ 11
3 Introduction ................................................................................................................................... 16
Product Description .......................................................................................................... 16
Features ............................................................................................................................ 17
USB Flash Drive Approved List ........................................................................................ 18
PTZ Compatibility List ....................................................................................................... 19
Quick Start Guide .............................................................................................................. 20
Logging In for the First Time ............................................................................................. 20
4 Installation ..................................................................................................................................... 22
Front Panel Controls ......................................................................................................... 22
Rear Panel Connectors ..................................................................................................... 23
4 Channel ................................................................................................................... 23
8 Channel ................................................................................................................... 24
16 Channel ................................................................................................................. 24
Remote Control ................................................................................................................. 25
Connection Guide ............................................................................................................. 26
Connecting the Monitor ............................................................................................. 26
Video Inputs and Looping Outputs ........................................................................... 26
Connecting to a Network ........................................................................................... 26
Connecting Audio ...................................................................................................... 26
Connecting a PTZ Camera ........................................................................................ 27
Connecting to a Sensor Input ................................................................................... 27
Connecting to a Relay Output ................................................................................... 27
Installing the Rackmount Kit (optional) ............................................................................ 28
Turning on the DVR........................................................................................................... 28
Setting the Remote Controller ID ...................................................................................... 28
5 Setup ............................................................................................................................................. 30
Setup Menus ..................................................................................................................... 30
System .............................................................................................................................. 31
System Configuration ................................................................................................ 31
______________________________________________________________________________________________
Document 800-02089 Rev E 11
10/08
Contents
Setup Wizard ............................................................................................................. 32
Disk Configuration ..................................................................................................... 33
Format ................................................................................................................ 33
Overwrite ............................................................................................................ 34
Check ................................................................................................................. 34
SMART Check .................................................................................................... 35
User Configuration ..................................................................................................... 36
Server ................................................................................................................. 36
Client ................................................................................................................... 37
Configuration ............................................................................................................. 38
Shutdown ................................................................................................................... 38
Camera .............................................................................................................................. 38
Camera Configuration ............................................................................................... 38
Color Setup (Adjust) ........................................................................................... 39
PTZ Configuration ...................................................................................................... 39
Spot / Sequence Configuration ................................................................................. 40
Monitor Configuration ................................................................................................ 41
Record ............................................................................................................................... 42
Record Configuration ................................................................................................ 42
Frame.................................................................................................................. 42
Schedule ............................................................................................................. 43
Audio .................................................................................................................. 43
Instant Recording ............................................................................................... 44
Using Instant Recording ............................................................................. 44
Motion/Event Configuration ....................................................................................... 45
Input .................................................................................................................... 45
Setting Up Motion Detection Recording ............................................................ 46
Sensor ................................................................................................................ 47
Action .................................................................................................................. 48
Alarm Monitor ..................................................................................................... 48
Network ............................................................................................................................. 49
Network Configuration ............................................................................................... 49
Serial Configuration ................................................................................................... 50
Client Configuration ................................................................................................... 51
E-mail Configuration .................................................................................................. 52
Information ........................................................................................................................ 53
System Log View ....................................................................................................... 53
Status View ................................................................................................................ 53
Version View .............................................................................................................. 54
6 Operation ....................................................................................................................................... 56
Search ............................................................................................................................... 56
Searching Recorded Data ......................................................................................... 56
Search Methods ........................................................................................................ 57
Express Search .................................................................................................. 57
Event Search ...................................................................................................... 57
Daylight Savings Search .................................................................................... 57
______________________________________________________________________________________________
12
Performance Series DVR User Guide
Go To First .......................................................................................................... 58
Go To Last .......................................................................................................... 58
Go To Jump ........................................................................................................ 58
Panorama Search ............................................................................................... 58
Smart Search ...................................................................................................... 58
Search Details ............................................................................................................ 59
Search Popup Menu .................................................................................................. 59
Monitoring ......................................................................................................................... 60
Select Channel .......................................................................................................... 60
Live Popup Menu ....................................................................................................... 61
Backup (Export) ................................................................................................................ 62
Manual Export ............................................................................................................ 62
Auto Backup .............................................................................................................. 63
Play Back Backup Image .................................................................................................. 63
S/W Upgrade..................................................................................................................... 64
Save Settings .................................................................................................................... 65
Save Settings ............................................................................................................. 65
Import Settings .......................................................................................................... 65
PTZ Camera Control ......................................................................................................... 66
Create PTZ Preset Position ....................................................................................... 66
7 Remote Software ........................................................................................................................... 68
Set Up a Remote Connection ........................................................................................... 68
Configuring the DVR .................................................................................................. 68
Configuring a Remote PC .......................................................................................... 69
Default Remote Software Log In Information ..................................................... 69
Access Remote Connection ............................................................................................. 70
Using the Remote Software .............................................................................................. 70
Setting the Time and Date ......................................................................................... 70
Live View Screen ....................................................................................................... 71
Camera View ...................................................................................................... 72
Screen Division Buttons ..................................................................................... 73
Setup Overview .......................................................................................................... 74
Setup Screen Overview ...................................................................................... 74
Camera Setup .................................................................................................... 74
Camera Setup ............................................................................................. 74
PanTilt Setup ............................................................................................... 74
Sequence Setup ......................................................................................... 75
SPOT Setup ................................................................................................ 75
Record Setup ..................................................................................................... 75
Time Setup .................................................................................................. 75
Schedule Setup ........................................................................................... 76
Audio Setup ................................................................................................ 76
Motion / Event Input .................................................................................... 76
HDD Setup .................................................................................................. 77
Sensor Setup ...................................................................................................... 77
Sensor ......................................................................................................... 77
______________________________________________________________________________________________
Document 800-02089 Rev E 13
10/08
Contents
System Setup ..................................................................................................... 78
User Management....................................................................................... 78
Firmware Upgrade ...................................................................................... 78
Search Overview ........................................................................................................ 79
Play Controls ...................................................................................................... 80
Performing a Basic Search ................................................................................ 80
Adjust the Brightness of an Image ..................................................................... 80
Zooming in on an Image .................................................................................... 80
Zooming in on a Portion of an Image ................................................................ 81
Printing an Image ............................................................................................... 81
Save Clip ............................................................................................................ 81
Saving a Video Clip ..................................................................................... 82
Status Search ............................................................................................................ 83
Performing a Status Search ............................................................................... 83
PTZ Overview ............................................................................................................. 84
Accessing PTZ Menus ....................................................................................... 84
Controlling a PTZ Camera .................................................................................. 84
Using the Graphical PTZ Controller ................................................................... 85
Using the On-screen Compass .......................................................................... 86
Web Viewer Overview ....................................................................................................... 87
Connecting to a DVR Using Web Viewer .................................................................. 88
Closing the Web Viewer ............................................................................................ 88
Digital Verifier Overview .................................................................................................... 89
Using the Digital Verifier ............................................................................................ 89
8 Appendix ....................................................................................................................................... 90
Screen Icon Index ............................................................................................................. 90
Recording Icons ........................................................................................................ 90
Status Icons ............................................................................................................... 91
Search Icons .............................................................................................................. 91
Button Index ...................................................................................................................... 91
LED Status Indicators ................................................................................................ 91
Enter / Exit Buttons .................................................................................................... 92
Function Buttons ....................................................................................................... 92
Numeric Buttons and Rec ......................................................................................... 93
Directional and Playback Control Buttons ................................................................ 93
DVR FAQ ........................................................................................................................... 94
General ...................................................................................................................... 94
Live Monitoring .......................................................................................................... 94
Recording .................................................................................................................. 95
Searching and Playing Video .................................................................................... 95
Backup ....................................................................................................................... 95
Network ...................................................................................................................... 95
Miscellaneous ............................................................................................................ 95
Troubleshooting ................................................................................................................ 96
Specifications (HRDP) ...................................................................................................... 97
______________________________________________________________________________________________
14
Performance Series DVR User Guide
______________________________________________________________________________________________
Document 800-02089 Rev E 15
10/08
Introduction
Introduction
Product Description
Honeywell’s HRDP Performance Series DVR is a powerful, yet affordable, video
management solution designed for easy installation and operation.
Preconfigured for continuous recording, with no additional setup required, the
Performance Series DVR offers quick search, setup, and backup features.
The Honeywell Embedded DVR comes ready for fast and seamless integration
within your existing IT infrastructure. The HRDP offers unparalleled stability,
______________________________________________________________________________________________
16
security, and ease of use in a 2U chassis. Accordingly, your security
investment has never been easier to maintain. Multiple users may connect
through digital networks such as LANs and WANs for simultaneous live
viewing, and digital search. This powerful software enables users to view live
video, perform searches, and operate PTZ cameras. It also provides system
users and administrators with additional capabilities such as establishing
recording schedules, and creating motion detection zones. With the latest
advancements in the Performance Series DVR software, searching and
indexing your video archive has never been easier.
Performance Series DVR User Guide
Features
The Honeywell Performance Series DVRs include the following features:
• 4 / 8 / 16 Composite Video Input Connectors
• Compatible with Color (NTSC or PAL) and B&W Video Sources
• Multiple Search Methods (Date/Time, Calendar, Event)
• Records 120 NTSC Images Per Second / 100 PAL Images Per Second
• Live Real Time Video Display (480 NTSC Images Per Second / 400 PAL
Images Per Second)
• 4 /8 / 16 Looping Video Outputs
• Auto Termination (75 Ohm) on Looping Outputs
• Continuous Recording with Disk Overwrite Mode
• Continuous Recording on Archiving, Transmitting to Remote, and
Playback
• Motion Based Recording Uniquely Configurable for Each Channel
• Customizable Motion Detection Grids Uniquely Configurable for Each
Channel
• Multiple Recording Modes (Manual / Schedule / Event)
• Audio (Mono) Recording and Playback
• 4 / 8 / 16 Built in Sensor Inputs (Normally Open or Normally Closed)
• 1 / 4 (16 Channel DVR only) Built in Relay Outputs (Normally Open or
Normally Closed)
• Remote Access via Ethernet and/or Modem
• PTZ Camera Control
• Internal DVD-RW supports CD-RW and DVD-RW media
______________________________________________________________________________________________
Document 800-02089 Rev E 17
10/08
Introduction
USB Flash Drive Approved List
These USB flash drives have been tested and approved to work with the
Performance Series HRDP DVR. Other USB flash drives may also work with
the HRDP DVR but have not yet been tested.
Manufacturer Model
SanDisk Cruzer
Talent Flash
Corsair Voyager
Lexar
Kingston Traveler
______________________________________________________________________________________________
18
Performance Series DVR User Guide
PTZ Compatibility List
The Honeywell Performance Series DVRs support a wide selection of PTZ
camera protocols:
Honeywell MAXPRO
Honeywell VCL
Honeywell (GC-655P)
Honeywell (HSD-250)
Honeywell (HSD-251)
American Dynamics
OpenEye 500
OpenEye 510
OpenEye – Pelco D
AcutVista
AlfaVision
KalatelDome
Cynix Speed Dome
CoVi EVQ-1000
CRR-1600I
DMP23-H2
Dongyang
DRX-500
DRX-502A
DS120
DSC-230/240
DY-255RXB
DynaColor
ERNA Tech
EyeView Dome
FastraxII
FilTech (DSC-230/PT-201)
Focvision
Ganz-PT
HMC-250
HSCP
Inter-M (VRX-2101)
Inter-M (VSD-640)
LG (LPT-A100L)
LG (LVC-A70x s)
LG SpeedDome
Merit Li-Lin
Merit Li-Lin V6
NVCC-Z42N
NICE CAM
NIKO
Pelco-D
Pelco-P
PIH-7600
SAE
Samsung (SCC-C420X)
Samsung (DVR-502A)
Samsung (MRX-1000)
Samsung (SCC-641)
Samsung (SPD-1600)
Sensormatic
Sungjin
Tamron
Toshiba
ViconSpeedDome
Visiontech
WONWOO
WSD-7425D
______________________________________________________________________________________________
Document 800-02089 Rev E 19
10/08
Introduction
Quick Start Guide
1. Turn on the DVR. See the Turning on the DVR section for more details.
2. Log in -- Use the number buttons to enter the password when prompted –
The password is <none> – Press ENTER.
3. Complete System Configuration to set up the date, time and system ID.
See the System Configuration section for more details.
4. Complete Sensor Configuration to enable any external devices connected
to sensor inputs or relay outputs. See the Motion/Event Configuration
section for more details.
5. Complete Disk Configuration to set overwrite options and enable SMART
Check. See the Disk Configuration section for more details.
6. Complete User Configuration to change the Admin password and add
additional users. See the System >User Configuration section for more
details.
7. Complete Camera Configuration for all attached cameras. See the Camera
Configuration section for more detail.
8. Complete PTZ Configuration for any attached Pan / Tilt / Zoom cameras.
See the PTZ Configuration section for more details.
9. Create a recording schedule. See the Record section for more details.
10. Complete Motion/Event Configuration to trigger recording on an event:
motion, sensor, video loss. See the Motion/Event Configuration section for
more details.
11. The DVR is now configured to record, search and playback video. See the
Operations section in this manual for more information on using the DVR.
Logging In for the First Time
The default administrative log in information:
ID: admin
Password: <none>
______________________________________________________________________________________________
20
Performance Series DVR User Guide
NOTES:
______________________________________________________________________________________________
Document 800-02089 Rev E 21
10/08
Installation
A
Installation
Front Panel Controls
DVD Drive
rrow Buttons
Backup Menu
Search Mode
Numeric Keypad
USB Ports
LED Lights
• Power
• HDD
• Record
• Network
• Fan
Instant Record
Live Display
Rotate
Setup Menu
Lock (logout)
______________________________________________________________________________________________
22
Performance Series DVR User Guide
V
Rear Panel Connectors
The rear panel of the DVR contains virtually all of the connectors you will be
using. The diagrams below outline the location and description of each
connector:
4 Channel
Sensor Input
Relay Output
OUT
IN
AC Power Input
Power Switch
Network Port
VGA Output
RS-232 Input
Spot Monitor Outputs
Audio Input / Output
Video Out Ports
ideo In Ports
______________________________________________________________________________________________
Document 800-02089 Rev E 23
10/08
Installation
8 Channel
Power Switch
16 Channel
Relay Output
AC Power Input
Network Port
Sensor Input
Video Out Ports
Video In Ports
OUT
IN
Spot Monitor Outputs
Audio Input / Output
VGA Output
RS-232 Input
Video Out Ports
Primary and Spot Monitor Outputs
Power Switch
AC Power Input
Network Port
OUT
IN
S-Video Output
Audio Output
Audio Input
VGA Output
RS-232 Input
Video In Ports
Relay Output
Sensor Input
______________________________________________________________________________________________
24
Remote Control
ID Select*
Performance Series DVR User Guide
REC
ID
Record Toggle
Pause
Rewind
S Arrow / Panorama
W Arrow
1
2 3
4 5 6
7 8 9
+10
ZOOM FOCUS IRIS
-30 +30
P
U
T
E
S
ENTER
ROTATE ALARM OSD PTZ
0
PTZ
REPLAY
S
P
E
U
A
K
R
C
A
B
CH
P
S
PRESET
L
I
V
EXIT
Log Off (Lock)
PTZ Controls
Play
Fast Forward
E
X Arrow
Display Options
*The ID Select button allows you
to use one remote control for
several DVRs.
______________________________________________________________________________________________
Document 800-02089 Rev E 25
10/08
Installation
Connection Guide
Connecting the Monitor
There are three available monitor outputs on the Performance Series DVR.
• Composite Monitor output for CCTV monitor – BNC (Marked MAIN)
• VGA output for VGA monitor – Mini-Sub D15
• S-Video output - Mini-Din 4 (16 Channel only)
Video Inputs and Looping Outputs
The Performance Series DVR comes with up to 16 BNC video inputs on the
rear of its chassis. Each video input has a corresponding looping BNC output
beneath it for passing the video signal to another monitoring/recording device.
Connecting to a Network
Use the RJ45 jack or RS232 port, if using a serial modem, on the rear of the
DVR when connecting to a network.
RS232
Connecting Audio
To record audio on the DVR connect the audio source to the Audio In Port
(White) on the back of the chassis.
To listen to live or recorded audio connect the Audio Out Port (Red) to an
amplified speaker system.
Note The DVR audio output is a line level source which requires an
amplified speaker system. The audio input can be from an amplified
source or directly from a microphone.
______________________________________________________________________________________________
26
Performance Series DVR User Guide
Connecting a PTZ Camera
The RS485 connector can be used to control Pan / Tilt / Zoom
(PTZ) cameras. See the PTZ camera manufacturer’s manual
for configuring the RS485 connection.
Note Use the RS485 connector for external control
systems such as a control keyboard. Connect
RX-/TX- and RX+/TX+ of the control system to the
TX-/RX- and TX+/RX+ (respectively) of the DVR.
Connecting to a Sensor Input
To make connections on the Alarm Connector Strip, press and hold the button
and insert the wire into the hole above the button. To disconnect the wire press
and hold the button below the wire and pull out
Alarm In
Use external devices to send a signal
to the DVR when an event occurs.
Mechanical or electrical switches can
be wired to the Alarm In and Ground
(GND) connectors.
Note All connectors marked GND are common. Connect the ground side
of the alarm input and/or alarm output to the GND connector.
Connecting to a Relay Output
To make connections on the Alarm Connector Strip, press and hold the button
and insert the wire into the hole above the button. To disconnect the wire press
and hold the button below the wire and pull out.
Alarm Out
______________________________________________________________________________________________
Document 800-02089 Rev E 27
10/08
The DVR can activate external
devices such as buzzers or lights.
Connect the external device to the
Alarm Out and Ground (GND)
connectors. See Sensor
Configuration in the manual for more
details.
Installation
Installing the Rackmount Kit (optional)
1. Attach the rackmount brackets with the screws provided on each side of
2. Mount the DVR in your rack.
Caution There must be a minimum 1U space between the DVR and any other
items in the rack.
the DVR. Do not remove the plastic edge guards.
Turning on the DVR
1. Connect the power cable.
2. Connect camera cables.
3. Connect a network cable and a monitor cable.
4. Switch the power switch on the back of the DVR to the ON position and
wait until the main screen is displayed on the connected monitor; this
process will take approximately two minutes.
Tip See the Connection Guide section for more details
Setting the Remote Controller ID
When more than one HRDP Performance Series DVR is installed in the same
location, you can use one remote controller to control multiple DVRs – up to 20
DVRs. To control multiple DVRs, you must change the remote controller ID to
the DVR ID of the DVR.
To change the remote controller ID:
1. On the DVR, go to SYSTEM > SYSTEM CONFIGURATION.
2. Enter the desired DVR ID number.
3. On the remote controller, press and hold the ID button and enter the
desired DVR ID number to operate the corresponding DVR.
______________________________________________________________________________________________
28
Note The DVR ID must be input as two numbers on the remote controller.
Therefore you should input 00 for the system ID 0 and input 01 for 1.
Performance Series DVR User Guide
NOTES:
______________________________________________________________________________________________
Document 800-02089 Rev E 29
10/08
Setup
Setup
Setup Menus
NETWORK CONFIGURATION
SERIAL CONFIGURATION
CLIENT CONFIGURATION
E-MAIL CONFIGURATION
Use the setup menus to configure all of the DVR settings, schedule recording,
networking and shutdown.
Press the Setup key on the front of the DVR or remote control to enter the
setup menus and log in. See the Quick Start Guide section if entering setup for
the first time. Use the S and T keys on the front of the DVR or remote control
to navigate individual menus, and use the W and X keys to select a new setup
menu.
______________________________________________________________________________________________
30
Loading...