Honeywell HEL-700 Platinum User Manual

Page 1
Interactive Catalog Replaces Catalog Pages
Honeywell Sensing and Control has replaced the PDF product catalog with the new
Interactive Catalog. The Interactive Catalog is
a power search tool that makes it easier to find product information. It includes more installation, application, and technical information than ever before.
Sensing and Contr ol
Honeywell Inc. 11 West Spring Street Freeport, Illinois 61032
Click this icon to try the new
Interactive Catalog.
Page 2
Temperature Sensors HEL-700 Platinum RTDs
FEATURES
1 Linear resistance vs temperature 1 Accurate and Interchangeable 1 Excellent stability 1 Small for fast response 1 Wide temperature range 1 3-packaging options
TYPICAL APPLICATIONS
1 HVAC - room, duct and refrigerant
equipment
1 Electronic assemblies - thermal man-
agement, temperature compensation
1 Process control - temperature regu-
lation
MOUNTING DIMENSIONS (for reference only) HEL-700 Ribbon Lead
HEL-700 Thin Film Platinum RTDs (Re­sistance Temperature Detectors) provide excellent linearity, accuracy, stability and interchangeability. Resistance changes linearly with temperature. Laser trimming
provides ±0.3°C interchangeability at 25°C.
1000V, 375 alpha provides 10X greater sensitivity and signal-to-noise. Both 1000V and 100V provide interchange-
abilities of ±0.6°C or better from -100°C to 100C, and ±3.0°C at 500°C.
ORDER GUIDE
HEL-700 Thin Film Platinum RTD
-U 1000V, 0.00375 V/V/°C
-T 100V, 0.00385 V/V/°C DIN Standard
-0 ±0.2% Resistance Trim (Standard)
-1 ±0.1% Resistance Trim (Optional)
-A Radial Ribbon Lead
-B Radial Chip
-C SMT Axial Flip Chip (1000V ONLY)
HEL-700 Radial Chip
HEL-700 SMT (Axial) Flip Chip
Fig. 1: Linear Output Voltage
Temperature
Fig. 2: Adjustable Point (Comparator) Interface
Honeywell1 Sensing and Control11-800-537-6945 USA1F1-815-235-6847 International11-800-737-3360 Canada
85
Page 3
Temperature Sensors HEL-700 Platinum RTDs
FUNCTIONAL BEHAVIOR
R
J R0(1+AT+BT2−100CT3+CT4)
T
RT J Resistance (V) at temperature T (°C)
R
J Resistance (V) at 0°C
0
T J Temperature in °C
A J a +
ad B J ad C 100 100
2
J ab
T<0
100
CONSTANTS
Alpha, a (°C
-1
) 0.00375 0.003850
±0.000029 ±0.000010
Delta, d (°C) 1.605 ± 0.009 1.4999 ± 0.007 Beta, b (°C) 0.16 0.10863
-1
A (°C
) 3.81×10
-2
B (°C
) 6.02×10
-4
C (°C
) 6.0×10
-3
-7
-12
3.908×10
5.775×10
4.183×10
-3
-7
-12
Both b J 0 and C J 0 for T>0°C
RESISTANCE VS TEMPERATURE CURVE
ACCURACY VS TEMPERATURE
HEL-700 platinum RTDs are available in two base resistance trim tolerances: ±0.2% or ±0.1%. The corresponding resistance interchangeability and temperature accuracy for these toler­ances are:
4
Tolerance Standard ±0.2% Optional ±0.1%
Temperature ±DR* ±DT ±DR* ±DT
(°C) (V)(°C) (V)(°C)
200 6.8 1.6 5.1 1.2
100 2.9 0.8 2.4 0.6
0 2.0 0.5 1.0 0.3
100 2.9 0.8 2.2 0.6
200 5.6 1.6 4.3 1.2
300 8.2 2.4 6.2 1.8
400 11.0 3.2 8.3 2.5
500 12.5 4.0 9.6 3.0
600 15.1 4.8 10.4 3.3
*1000V RTD. Divide DR by 10 for 100V RTD.
CAUTION
PRODUCT DAMAGE
The inherent design of this component causes it to be sensitive to electrostatic discharge (ESD). To prevent ESD-induced damage and/or degradation, take normal ESD precautions when handling this product.
SPECIFICATIONS
Sensor Type Thin film platinum RTD;
R
J 1000 V @0°C; alpha J 0.00375 V/V/°C
0
R
J 100 V @0°C; alpha J 0.00385 V/V/°C
0
Temperature Range 200 to +540°C (300 to +1000°F) Temperature Accuracy ±0.5°C or 0.8% of temperature, °C (R
±0.3°C or 0.6% of temperature, °C (R
Base Resistance and Interchangeability, R
± DR
0
1000 ± 2 V (±0.2%) @ 0°C 1000 ± 1 V (±0.1%) @ 0°C (optional)
0
±0.2% trim), whichever is greater
0
±0.1% trim), whichever is greater (optional)
0
Linearity ±0.1% of full scale for temperatures spanning 40° to +125°C
±2.0% of full scale for temperatures spanning 200° to +540°C
Time Constant <0.15 seconds in water @ 3 ft./sec.
<1 second on metal surfaces: <4 seconds in air @ 10 ft./sec.
Operating Current 2 mA max. For self-heating errors of 1°C
1 mA recommended
Stability Better than 0.25°C/year: 0.05°C/5 years for occupied environments Self-Heating 0.3 mW/°C Insulation Resistance >50 MV @ 50 VDC @ 25°C
Case Material 99% alumina support, vapor deposited alumina passified resistance portion, refractory glass
passified overall
Lead Material – Ribbon Platinum ribbon, 0.002 × 0.010 × 0.16 in. long nominal
Lead Pull Strength – Ribbon 200 grams nominal pulling up from surface
86
Honeywell1 Sensing and Control11-800-537-6945 USA1F1-815-235-6847 International11-800-737-3360 Canada
Page 4
Temperature Sensors HEL-700 Series Platinum RTDs
FEATURES
1 Linear resistance vs temperature 1 Accurate and Interchangeable 1 Excellent stability 1 Teflon or fiberglass lead wires 1 Wide temperature range 1 Ceramic case material
TYPICAL APPLICATIONS
1 HVAC – room, duct and refrigerant
equipment
1 Instrument and probe assemblies –
temperature compensation
1 Process control – temperature
regulation
ORDER GUIDE
HEL-705 28 ga. TFE Teflon, 2-wire only
HEL-707 28 ga. Fiberglass, 2-wire only
HEL-711 28 ga. TFE Teflon (2-wire 1000V, 3-wire 100V)
HEL-712 28 ga. Fiberglass (2-wire 1000V, 3-wire 100V)
HEL-716 24 ga. TFE Teflon (2-wire 1000V, 3-wire 100V)
HEL-717 24 ga. Fiberglass (2-wire 1000V, 3-wire 100V)
-U 1000V, 0.00375 V/V/°C
-T 100V, 0.00385 V/V/°C DIN Standard
-0 ±0.2% Resistance Trim (Standard)
-1 ±0.1% Resistance Trim (Optional)
-12 Lead wire length, 12 inches
-00 No NIST calibration
-C1 NIST @ 0°C
-C2 NIST @ 0 & 100°C
-C3 NIST @ 0, 100 & 260°C
HEL-700 Series elements are fully assem­bled, ready to use directly or in probe assemblies without the need for fragile splices to extension leads.
The 1000V, 375 alpha version, provides 10X greater sensitivity and signal-to­noise. Optional NIST calibrations im-
prove accuracy to ±0.03°C at 0°C.
Fig. 1: Wheatstone Bridge 2-Wire Interface
Fig. 2: Linear Output Voltage
MOUNTING DIMENSIONS (for reference only)
Fig. 3: Adjustable Point (Comparator) Interface
CAUTION
PRODUCT DAMAGE
The inherent design of this component causes it to be sensitive to electrostatic discharge (ESD). To prevent ESD-induced damage and/or degradation, take normal ESD precautions when handling this product.
Honeywell1Sensing and Control11-800-537-6945 USA1F1-815-235-6847 International11-800-737-3360 Canada
Temperature
87
Page 5
Temperature Sensors HEL-700 Series Platinum RTDs
FUNCTIONAL BEHAVIOR
R
J R0(1+AT+BT2−100CT3+CT4)
T
RT J Resistance (V) at temperature T (°C)
R
J Resistance (V) at 0°C
0
T J Temperature in °C
A J a +
ad B J ad C 100 100
2
Jab
T<0
100
4
CONSTANTS
Alpha, a (°C
-1
) 0.00375 0.003850
±0.000029 ±0.000010
Delta, d (°C) 1.605 ± 0.009 1.4999 ± 0.007 Beta, b (°C) 0.16 0.10863
-1
A (°C
) 3.81×10
-2
B (°C
) 6.02×10
-4
C (°C
) 6.0×10
-3
-7
-12
3.908×10
5.775×10
4.183×10
-3
-7
-12
Both b J 0 and C J 0 for T>0°C
RESISTANCE VS TEMPERATURE CURVE
ACCURACY VS TEMPERATURE
Tolerance Standard ±0.2% Optional ±0.1%
Temperature ±DR* ±DT ±DR* ±DT
(°C) (V)(°C) (V)(°C)
200 6.8 1.6 5.1 1.2
100 2.9 0.8 2.4 0.6
0 2.0 0.5 1.0 0.3
100 2.9 0.8 2.2 0.6
200 5.6 1.6 4.3 1.2
300 8.2 2.4 6.2 1.8
400 11.0 3.2 8.3 2.5
500 12.5 4.0 9.6 3.0
600 15.1 4.8 10.4 3.3
*1000V RTD. Divide D by 10 for 100V RTD.
NIST CALIBRATION
NIST traceable calibration provides resistance readings at 1, 2 or 3 standard temperature points to yield a resistance versus tem­perature curve with 10x better accuracy.
Calibration 1 Point 2 Point 3 Point
T (°C) ±DT (°C) ±DT (°C) ±DT (°C)
-200 0.9
-100 0.5 0.27 0.15
0 0.03 0.03 0.03
100 0.4 0.11 0.07
200 0.8 0.2 0.08
300 1.2 0.33 6.2
400 1.6 0.5 8.3
500 2.0 0.8 9.6
600 2.6 1.2 10.4
SPECIFICATIONS
Sensor Type Thin film platinum RTD;
R
J 1000 V @0°C; alpha J 0.00375 V/V/°C
0
R
J 100 V @0°C; alpha J 0.00385 V/V/°C
0
Temperature Range TFE Teflon: 200° to +260°C (320°to +500°F)
Fiberglass: 75° to +540°C (100° to +1000°F)
Temperature Accuracy ±0.5°C or 0.8% of temperature, °C (R
±0.3°C or 0.6% of temperature, °C (R
Base Resistance and Interchangeability, R
± DR
0
1000 ± 2 V (±0.2%) @ 0°C 1000 ± 1 V (±0.1%) @ 0°C (optional)
0
±0.2% trim), whichever is greater
0
±0.1% trim), whichever is greater (optional)
0
Linearity ±0.1% of full scale for temperatures spanning 40° to +125°C
±2.0% of full scale for temperatures spanning 75° to +540°C
Time Constant <0.5 sec. 0.85 inch O.D. in water at 3 ft/sec; <1.0 sec, 0.85 inch O.D. in still water
Operating Current 2 mA maximum for self heating errors of <1°C; 1 mA recommended Stability <0.25°C/year; 0.05°C per 5 years in occupied environments Self Heating <15 mW/°C for 0.85 O.D. typical Insulation Resistance >50 MV at 50 VDC at 25°C
Construction Alumina case; Epoxy potting (Teflon leads); Ceramic potting (fiberglass leads)
Lead Material Nickel coated stranded copper, Teflon or Fiberglass insulated
88
Honeywell1 Sensing and Control11-800-537-6945 USA1F1-815-235-6847 International11-800-737-3360 Canada
Loading...