intended for use with a Listed Power Adapter marked with “Limited Power Source”, “LPS”,
on the unit, output rated 12 V DC, minimum 0.5A, Tma=60Deg.C or from Power over
Ethernet (PoE) provided by Listed Information Technology Equipment meeting the IEEE
802.3af PoE standard.
The Ethernet connection is not intended to be connected to exposed (outside plant)
networks. Do not connect two power sources to the camera at the same time.
CAUTIONInvisible LED radiation (850 nm). Avoid exposure to beam.
Regulatory Statements
FCC Compliance Statement
Information to the User: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
To ensure compliance with electrical safety standards this product is
If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
•Consult the dealer or an experienced radio/TV technician for help.
800-18161 - A - 06/2014
6 | Embedded NVR Bundle IP Cameras User Guide
Note Changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
Canadian Compliance Statement
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la Classe B est conforme à la norme NMB-003 du Canada.
Manufacturer’s Declaration of Conformance
North America
The equipment supplied with this guide conforms to UL 60950-1 and CSA C22.2 No. 60950-1.
Europe
The equipment supplied with this guide meets the provisions of the following European Union
council directives:
•2004/108/EC for EMC,
•2001/95/EC for safety, and
•2011/65/EU for RoHS compliance.
Waste Electrical and Electronic Equipment (WEEE)
Safety Instructions
Before installing or operating the unit, read and follow all instructions. After
installation, retain the safety and operating instructions for future reference.
1.HEED WARNINGS - Adhere to all warnings on the unit and in the operating instructions.
Correct Disposal of this Product (applicable in the European Union and other
European countries with separate collection systems).
This product should be disposed of, at the end of its useful life, as per applicable
local laws, regulations, and procedures.
www.honeywell.com/security
| 7
2.INSTALLATION
•Install in accordance with the manufacturer’s instructions.
•Installation and servicing should be performed only by qualified and experienced
technicians to conform to all local codes and to maintain your warranty.
•Any wall or ceiling mounting of the product should follow the manufacturer’s
instructions and use a mounting kit approved or recommended by the manufacturer.
3.POWER SOURCES - This product should be operated only from the type of power source
indicated on the marking label. If you are not sure of the type of power supplied to your
facility, consult your product dealer or local power company.
4.MOUNTING SYSTEM - Use only with a mounting system recommended by the
manufacturer, or sold with the product.
5.ATTACHMENTS - Do not use attachments not recommended by the product
manufacturer as they may result in the risk of fire, electric shock, or injury to persons.
6.ACCESSORIES - Only use accessories specified by the manufacturer.
7.CLEANING - Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for
cleaning.
8.SERVICING - Do not attempt to service this unit yourself. Refer all servicing to qualified
service personnel.
9.REPLACEMENT PARTS - When replacement parts are required, be sure the service
technician has used replacement parts specified by the manufacturer or have the same
characteristics as the original part. Unauthorized substitutions may result in fire, electric
shock or other hazards. Using replacement parts or accessories other than the original
manufacturers may invalidate the warranty.
This document introduces the Honeywell Embedded NVR Bundle IP Cameras. It covers how to
install and operate the Embedded NVR Bundle IP Cameras.
This document is intended for installers and users.
Overview of Contents
This document contains the following chapters and appendixes:
•Chapter 1, Introduction, introduces the Embedded NVR IP Cameras, including
descriptions of their features and illustrations showing the cameras’ dimensions.
•Chapter 2, Configuration, describes the Quick Configuration tool and how to install it.
•Chapter 3, Web Operation, describes how to connect to your camera over the internet,
describes the user interface, and how to remotely configure and operate your camera.
•Appendix A, Troubleshooting, describes possible problems and their solutions.
•Appendix B, Specifications, provides the cameras’ specifications.
•Index, provides a searchable list for easy access to the document.
800-18161 - A - 06/2014
18 | Embedded NVR Bundle IP Cameras User Guide
Related Documents
This document is a necessary prerequisite for understanding the Embedded NVR Bundle IP
Cameras. For more information, please refer to the following documents:
Document titlePart numberDescription
Embedded NVR Quick Connection
Guide
Embedded NVR Quick Networking
Guide
H2D2PR1 1080p True Day/Night IR
Ball IP Camera Quick Installation
Guide
HBD2PR1 1080p True Day/Night IR
Bullet IP Camera Quick Installation
Guide
Embedded NVR User Guide800-18160Describes the embedded NVR, how to install it, how to
800-16860Visually describes how to connect and start up an
Embedded NVR.
800-16861Visually describes how to configure network
connections, including the mobile application.
800-17073Describes the physical setup of a H2D2PR1 ball
camera.
800-17077Describes the physical setup of a HBD2PR1 ball
camera.
configure it, and how to use it.
Typographical Conventions
This document uses the following typographical conventions:
FontWhat it representsExample
Helvetica
LucidaValues of editable fields that are mentioned in the
Swiss721 BT Bold Words or characters that you must type. The word
www.honeywell.com/security
Keys on the keyboardPress Ctrl+C
The Time from field can be set to
body text of the document for reference purposes,
but do not need to be entered as part of a procedure
Text strings displayed on the screen
Syntax
“enter” is used if you must type text and then press
Enter or Return key.
the
Menu titles and other items you selectDouble-click Open from the File menu.
Buttons you click to perform actionsClick Exit to close the program.
Hours:Minute:Seconds.
The message Unauthorized displays.
(object) entered
Enter the password.
FontWhat it representsExample
| 19
ItalicPlaceholders: words that vary depending on the
situation
Cross-reference to external sourceRefer to the Embedded NVR Quick
Cross-reference within documentSee Chapter 2, Configuration.
Enter your user name.
Installation Guide.
800-18161 - A - 06/2014
20 | Embedded NVR Bundle IP Cameras User Guide
www.honeywell.com/security
1
Introduction1
This chapter covers:
•An overview of the Embedded NVR Bundle IP Cameras IP Cameras and their features.
Overview of the Embedded NVR Bundle IP Cameras
The Embedded NVR Bundle IP Cameras IP Cameras integrate the traditional camera with
network video technology, while combining video data collection and transmission. They can
directly connect to the network without any auxiliary device.
The Embedded NVR Bundle IP Cameras IP Cameras use standard H.264 video compression
technology, which guarantees maximum video quality.
Some of the Embedded NVR Bundle IP Cameras IP Cameras (H2D2PR1, HBD2PR1) support IR
night vision. At night or in dimly environments, these cameras can use IR light to illuminate the
scene. The waterproof design conforms to IP66 standards, making the Embedded NVR Bundle
IP Cameras suitable for use in outdoor environments.
The Embedded NVR Bundle IP Cameras can be used alone or used in a network. When not in
a system, you can connect them to the Internet and then use a Internet web client on your PC.
Due to their flexibility, the Embedded NVR Bundle IP Cameras IP Cameras can be used in many
environments to monitor offices, banks, or roads, for example.
800-18161 - A - 06/2014
22 | Embedded NVR Bundle IP Cameras User Guide
Features of the Embedded NVR Bundle IP Cameras
Table 1-1IP Cameras Features
CategoryFeatures
User Management• Different user rights for each group; each user belongs to
a specific group.
• User rights cannot exceed Group rights.
Storage• Supports central server backup in accordance with your
configuration and setup in Alarm or Schedule settings.
• Supports recording via the Internet. The recorded files are
stored on the client’s PC.
• Supports network storage, such as FTP.
Network Monitor• Cameras support one-channel video data transmission to
a network terminal, and the decoding of that data. The
Delay time is less than 270ms (network bandwidth
support is required).
• Supports a maximum of 20 connections.
• Compatible with the following transmission protocols:
HTTP, TCP, UDP, MULTICAST, RTP/RTCP, RTSP.
• Supports web access.
www.honeywell.com/security
Introduction | 23
Table 1-1IP Cameras Features
CategoryFeatures
Network Management• Supports network camera configuration and
management via the Ethernet.
• Supports device management via the Internet or through
the client’s PC.
Power• External 12 V DC adapter.
• Supports PoE.
WARNING Do NOT connect these two power sources to
the cameras at the same time. This could result in
damage to the camera.
Assistant Function• Log function.
• Supports system resource information and running status
real-time display.
• Supports Day/Night mode auto switch.
• Supports picture parameter setup such as electronic
shutter and gain setup.
• Supports motion detection.
• Supports backlight compensation: screen auto splits to
aid in configuring backlight compensation, which adjusts
to the scene brightness.
• Supports video watermark function to avoid video
modification.
• Built-in IR light. Supports IR night vision (depending on
the camera model).
• Enclosure conforms to IP66 protection. The cameras are
waterproof.
Camera Dimensions and Components
For camera specifications, please see Appendix B on page 97.
800-18161 - A - 06/2014
24 | Embedded NVR Bundle IP Cameras User Guide
In millimeters
H2D2PR1
Dimensions
Figure 1-1H2D2PR1 Camera Dimensions
Components
Figure 1-2H2D2PR1 Camera Components
Table 1-2H2D2PR1 Camera Components
NameFunction
1Lens
2Dome body
www.honeywell.com/security
HBD2PR1
In millimeters
Introduction | 25
Table 1-2H2D2PR1 Camera Components
NameFunction
3Dome camera enclosure
4LANNetwork port to connect to standard Ethernet.
512 V DCConnect 12 V DC
Dimensions
Figure 1-3HBD2PR1 Camera Dimensions
Components
Figure 1-4HBD2PR1 Camera Components
800-18161 - A - 06/2014
26 | Embedded NVR Bundle IP Cameras User Guide
Table 1-3HBD2PR1 Camera Components
NameFunction
1LANNetwork port to connect to standard Ethernet.
Note Before connecting to the RJ-45 port, pull the anti-dust cover
212 V DCConnect 12 V DC
over the network cable.
www.honeywell.com/security
2
Configuration2
This chapter includes:
•An overview of the Honeywell Configuration Tool.
•Installation procedures for the Honeywell Configuration Tool.
Overview
The Honeywell Configuration Tool can be used to:
•Search for the current IP address.
•Modify the current IP address.
•Upgrade the IP camera.
NoteThe Honeywell Configuration tool applies only to the IP addresses in the same
segment.
Starting the Honeywell Configuration Tool
You must install the Honeywell Configuration Tool before you can use it to discover IP devices.
800-18161 - A - 06/2014
28 | Embedded NVR Bundle IP Cameras User Guide
Installing the Quick Configuration Tool
1.Insert the Software CD that came with your NVR into your PC. Navigate to and double-click
Honeywell Config Tool to install the configuration tool software.
The Honeywell Config Tool installation wizard opens.
Figure 2-1Honeywell Config Tool Wizard
2.Click Next to begin the installation. The User License Agreement page appears.
www.honeywell.com/security
Figure 2-2User License Agreement Page
Configuration | 29
3.Click to select I agree, and then click Install to install the software.
The Installation is Complete page appears has been successful.
Figure 2-3Installation is Complete Page
4.Click Enjoy Now to open and use the Config Tool.
800-18161 - A - 06/2014
30 | Embedded NVR Bundle IP Cameras User Guide
Opening the Honeywell Configuration Tool, Searching for Devices, and
Opening a Web Client
In the Config Tool, you will find the IP addresses for the IP devices (NVRs and IP cameras).
1.Click to open the Config Tool.
Figure 2-4Configtool Interface
2.Click in the Config column for a device to open a Web Client for that device.
Upgrading a Single IP Camera
1.Open the ConfigTool software.
Figure 2-5ConfigTool Login
2.Select from the list the device you want to upgrade.
3.Click Login to log in to the device.
www.honeywell.com/security
Loading...
+ 80 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.