Honeywell HAQ Users Manual

User Man

oduct

Sensing & Internet of Things

www.sensing.honeywell.com

t the Pr

Formaldehyde

TV OC

Temp Humidity

Product Code

2.5

HAQSPA_R

Product Measurement: 80 x 80 x 22(mm)

Weight: 156g

USB Port: Micro USB

Materials: Aluminum alloy casing Screen:

OLED Touch screen

Input Vo

ltage: 5V

Input Current: 1A

Battery: 18,650 lithium-ion battery Battery

Capacity: 2,600mAh

The IQ%

Time

IQ%

App

Alarm

impact of air environment elements on cognitive ability.

nge andecisio

Description Detection Range Precision/Resolution

PM2.5

HCHO (Formaldehyde)

TVOC 0.12 ~ 0.99ppm CO Temperature -10 ~ 40 ±1

Humidity

IQ%

Wireless connection: Wi-Fi IEEE 802.11 b/g/n 2.4GHz

Equipment requirements: Supports mobile phones with Android 4.42 or iOS

8.0 or better

Note: Supports only iPhone5 and later versions

100 ~ 999ug/m

<100ug/m

0 ~2ppm

400 ~ 2,000ppm

0% ~ 100%

0 ~ 100%

±15%

±15ug/m

0.01ppm(resolution)

0.01ppm(resolution) 1ppm(resolution)

±5%

1%(resolution)

App Download

Scan the or search Honeywell IAQ in Apple

Store and Android Market

In andnstruions on

PM2.5 HCHO TVOC IQ%

0 ~ 79ug/m3 < 0.08ppm < 0.38ppm < 1,000ppm >60%

80 ~ 199ug/m

> 200ug/m

Note: Air quality of PM2.5 and IQ% are showed through the change of font

color accordingly .

————

>0.08ppm

>0.38ppm >1,000ppm <60%

lors

out

lf-de GJned alarmT value: Default alarm value is factory

• Se

tions

setting. For threshold please see explanation above for App icon. The user can def i ne alarm value according to own needs. The equipment’s indicator light and App on the user’s mobile phone will display in accordance

• Alarm clock: 3 alarms can be set for each device while

it is connected to the network. If the alarm rings

simply touch the screen or press the Home button

The

activity.

ode andttin

Sleep mode: The screen and indicator light will extinguish

during set time durations and the frequency of data collecti

will reduce to on ce per hour. Switch the mode using the App if the device is c onnected to

network.

Energy-saving mode: The frequency of data collection for

the device will reduce to once per hour. Switch the mode

using the App if the device is connected to network.

nstruions

• Enter the main interface after activating the device.

• Press the icon light to switch to main screen; it will show real-time ai r value.

• Flashing icon indicates excess values.

•

CO2 manual calibration:

• Carry the device outdoors, switch to the CO2 icon, and then press and hold the center of the screen for 3

seconds until the phrase “being calibrated” appears on

the screen and the device enters calibration mode.

• Place the device outdoors for 20 minutes continuously

until the phrase “being calibrated” disappears, which

means the device will automatically exit the calibration

mode upon completing calibration.

CO2 automatic calibration:

• Enable: The device will automatically calibrate and exit

energy savings mode after continuous operation for 60

days. This calibration will be completed in 28 hours.

Device indicator light and color: The device’s indicator light

shows the current air quality indicator for the detection item

Detection

Item

PM2.5

Formaldehyde

TVOC

Temperature

Humidity

IQ% > 60% — < 60%

Green Orange Red

0 ~ 79ug/m3 80 ~ 199ug/m3 ≥200ug/m

< 0.08ppm — > 0.08ppm

< 0.38ppm

< 1,000ppm —

-10 ~ 40

0% ~ 100% — —

— > 0.38ppm

— —

> 1,000ppm

Packing Lis

Indoor ; Product Manual x 1; USB

cable x 1

Indoor Air Quality (IAQ) Product Manual

• Note when detecting formaldehyde/TVOC: Due to its packaging, the device will display a higher reading when in use for the first time, which is normal. The device may be placed in a well-ventilated area until the reading drops down to 0.08 ppm before use. The formaldehyde/TVOC sensor is an electrochemical sensor. Due to the effects from its electrochemical properties, detection of formaldehyde/TVOC by the electrochemical sensor will be affected by any substance that contains toluene, benzene, alcohol, acetic

acid, hydrogen sulfide, carbon monoxide. Please keep the

device away from substances such as wine, perfume, cosmetics, pesticides, etc. when in use.

• The date and time settings of the device can only be updated when connected to the internet. Please keep the device connected to the internet.

• Do not charge when the temperature falls below zero.

• The device collects data from incoming air through the

built-in fan. It is normal for the device to make low levels of

sound.

• When in use, keep the device away from any strong magnet field which may interfere with the built-in sensor (such as PM2.5 sensor).

• If the device fails to connect to the internet, the mDNS and DHCP of the router may experience issues. Please check that these two router functions are enabled or reboot the router to reconnect. We recommend that the router’s default IP address range be

192.168.X.X. with the gateway as 192.168.1.1.

• To better reflect the true air environment, we recommend continuously monitoring the average values on the app. It is recommended that the device be charged for 24 hours continuously the first time you use it, so that it can be initialized.

• As a protective measure, the powered off device will continue to provide a weak current to the sensor. Even if fully charged, the device will drain the power if it is not used for a long period of time and must be recharged before being used again.

• When charged, the device will have a slightly higher temperature even at a low power level. The temperature of the fully charged device will not be affected even if it remains connected to its power supply.

• Under circumstances where the product is in normal use and maintenance, Honeywell provides users with the warranty that this product will have no defects in processing or materials within one (1) year following the date of purchase. Where Honeywell veries such product experiences any defect or malfunction in any form within the specif i ed warranty period, Honeywell will repair or replace any defective product upon verif i cation. In case of defective products, users may return such product to the distributor where they made the original purchase.

• This warranty does not cover any defects and malfunction of the product arising from any unauthorized dismantling or reinstallation. This warranty also does not cover any defect or malfunction that results from human factors during the warranty period. Honeywell’s sole responsibility is to repair or replace the product based on the aforesaid provisions.

• Honeywell shall not be responsible for any loss or damage of any form, including any accidental or necessary direct or indirect loss as a result of breach of any warranty or any other acts that damage the product.

• This warranty represents the only explicit guarantee as undertaken by Honeywell with respect to such products. Any implied guarantee, including implied guarantees with respect to product marketability and applicability of specic usage, shall not apply.

• This warranty only applies to the main unit of the product, and does not cover the package, manuals, consumables, or other components susceptible to damage or consumption.

Note: This product has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This product generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this product does cause harmful interference to radio or television reception, which can be determined by turning the equipment o interference by one or more of the following measures:

—Reorient or relocate the receiving antenna.

IC S

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:

1. this device may not cause interference, and

2. this device must accept any interference, including interference that may cause undesired operation of the device.

Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radioexempts de licence. L'exploitation est autorisée aux deux conditions suivantes :

1. l'appareil ne doit pas produire de brouillage, et

2. l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.

and on, the user is encouraged to try to correct the

—Increase the separation between the equipment and receiver.

—Connect the equipment into an outlet on a circuit di that to which the receiver is connected.

—Consult the dealer or an experienced radio/TV technician for help.

Please take attention that changes or modication not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication.

Conformément à la réglementation d'Industrie Canada, le présent émetteur radio peut

fonctionner avec une antenne d'un type et d'un gain maximal (ou inférieur) approuvé pour l'émetteur par Industrie Canada. Dans le but de réduire les risques de brouillage radioélectrique à l'intention des autres utilisateurs, il faut choisir le type d'antenne et son gain

erent from

de sorte que la puissance isotrope rayonnée équivalente (p.i.r.e.) ne dépasse pas l'intensité nécessaire à l'établissement d'une communication satisfaisante.

tion

Risk of explosion if battery is replaced by an incorrect type. Dispose

of used batteries according to the instructions

Honeywell International Inc. a r. H erve e ri t i y

wit II w t

nt any co it nt HII.

HII i

ot r o i le or any tec ical

ca rovi i nti o i aterial. HII i ot

F Exposu

After the laboratory measurement, the SAR value (0.0085W/kg for Europe, 0.029W/kg for North American) satises the RF exposure requirement

To satisfy RF exposure compliance the user should operate the device as the User Manual introduced and the antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

HAQSPA_R are in

o o e an a are t a o e Inc.

o t ntione t al t a

ter t eir re ective co i c e

owne

etary i ion conta t article i rotect y

i t. All rv . it or written co ent HII

a oco y y or tran ation into ot

not allow .

Rev: V 3