Honeywell GENT User Manual

by Honeywell

RESPONSE PAGING SYSTEM

PAGER USER GUIDE

by Honeywell

Turning On the Pager

Press and hold for 2 seconds, the pager will then display the standby screen.

After a short time the pager screen will go blank to preserve the battery, press any key to return to the

standby screen.

Turning Off the pager

Go to the standby screen, press or keys to select the ‘Turn Off’ menu.

Press twice to confirm your choice.

Read Messages

To read a stored message, press from the standby screen.

Use or to scroll through the messages. Each message is allocated a slot number (i.e.

01, 02, 03 etc)

For messages that are longer than the two lines or to read the time and date of the message

press

You will automatically return to the standby screen.

Deleting Messages

Display the message to be deleted, hold for 2 seconds to view the delete menu.

To delete a single message use the to select ‘DEL’, press to Confirm Delete Message.

To delete all Messages use to select ‘D.ALL’, press to Confirm Delete Message.

You will automatically return to the standby screen.